RESUMO
Ammonia is crucial as a fertilizer and in the chemical industry and is considered to be a carbon-free fuel1. Ammonia electrosynthesis from nitrogen under ambient conditions offers an attractive alternative to the Haber-Bosch process2,3, and lithium-mediated nitrogen reduction represents a promising approach to continuous-flow ammonia electrosynthesis, coupling nitrogen reduction with hydrogen oxidation4. However, tetrahydrofuran, which is commonly used as a solvent, impedes long-term ammonia production owing to polymerization and volatility problems. Here we show that a chain-ether-based electrolyte enables long-term continuous ammonia synthesis. We find that a chain-ether-based solvent exhibits non-polymerization properties and a high boiling point (162 °C) and forms a compact solid-electrolyte interphase layer on the gas diffusion electrode, facilitating ammonia release in the gas phase and ensuring electrolyte stability. We demonstrate 300 h of continuous operation in a flow electrolyser with a 25 cm2 electrode at 1 bar pressure and room temperature, and achieve a current-to-ammonia efficiency of 64 ± 1% with a gas-phase ammonia content of approximately 98%. Our results highlight the crucial role of the solvent in long-term continuous ammonia synthesis.
RESUMO
Ammonia (NH3) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber-Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH3 production that can be paired with renewable energy. The first verified electrochemical method for NH3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH3 synthesis. We verified the calcium-mediated process using a rigorous protocol and achieved an NH3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip)4]2) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH3, a critical chemical precursor and promising energy vector.
RESUMO
Phase engineering of Pt-based intermetallic catalysts has been demonstrated as a promising strategy to optimize catalytic properties for a direct formic acid fuel cell. Pt-Bi intermetallic catalysts are attracting increasing interest due to their high catalytic activity, especially for inhibiting CO poisoning. However, the phase transformation and synthesis of intermetallic compounds usually occurring at high temperatures leads to a lack of control of the size and composition. Here, we report the synthesis of intermetallic ß-PtBi2 and γ-PtBi2 two-dimensional nanoplates with controlled sizes and compositions under mild conditions. The different phases of intermetallic PtBi2 can significantly affect the catalytic performance of the formic acid oxidation reaction (FAOR). The obtained ß-PtBi2 nanoplates exhibit an excellent mass activity of 1.1 ± 0.01 A mgPt-1 for the FAOR, which is 30-fold higher than that of commercial Pt/C catalysts. Moreover, intermetallic PtBi2 demonstrates high tolerance to CO poisoning, as confirmed by in situ infrared absorption spectroscopy.
RESUMO
The design of highly active and durable catalysts for the sluggish anodic oxygen evolution reaction (OER) in acid remains an urgent yet challenging goal in water electrolysis. Herein, a core-shell nanostructured Ru@Ir-O catalyst with tensile strains and incorporated oxygens is introduced in the Ir shell that holds an extremely low OER overpotential of 238 mV at 10 mA cm-2 in acid. The material also shows a remarkable 78-fold higher mass activity than the conventional IrO2 at 1.55 V in 0.5 M H2 SO4 . Structural characterization and theoretical calculations reveal that the core-shell interaction and tensile strain cause band position shift and charge redistribution. These electronic factors furthermore optimize the bonding strength of O* and HOO* intermediates on the surface, yielding significantly boosted OER activity relative to the conventional IrO2 .
RESUMO
Electrocatalysts with single metal atoms as active sites have received increasing attention owing to their high atomic utilization efficiency and exotic catalytic activity and selectivity. This review aims to provide a comprehensive summary on the recent development of such single-atom electrocatalysts (SAECs) for various energy-conversion reactions. The discussion starts with an introduction of the different types of SAECs, followed by an overview of the synthetic methodologies to control the atomic dispersion of metal sites and atomically resolved characterization using state-of-the-art microscopic and spectroscopic techniques. In recognition of the extensive applications of SAECs, the electrocatalytic studies are dissected in terms of various important electrochemical reactions, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Examples of SAECs are deliberated in each case in terms of their catalytic performance, structure-property relationships, and catalytic enhancement mechanisms. A perspective is provided at the end of each section about remaining challenges and opportunities for the development of SAECs for the targeted reaction.
RESUMO
The development of highly selective and active catalysts to catalyze an industrially important semihydrogenation reaction remains an open challenge. Here, we report the design of a bimetallic Pd/Cu(111) catalyst with Pd rafts confined in a Cu nanosheet, which exhibits desirable catalytic performance for acetylene semihydrogenation to ethylene with the selectivity of >90%. Theory calculations show that Pd atoms replacing neighboring Cu atoms in Cu(111) can improve the catalytic activity by reducing the energy barrier of the semihydrogenation reaction, as compared to unsubstituted Cu(111), and can improve the selectivity by weakening the adsorption of C2H4, as compared to a Pd(111) surface. The presence of Pd rafts confined in Cu nanosheets effectively turns on Cu nanosheets for semihydrogenation of acetylene with high activity and selectivity under mild reaction conditions. This work offers a well-defined nanostructured Pd/Cu(111) model catalyst that bridges the pressure and materials' gap between surface-science catalysis and practical catalysis.
Assuntos
Acetileno , Cobre , Catálise , Microdomínios da Membrana , PaládioRESUMO
Scanning probe block copolymer lithography (SPBCL), in combination with density-functional theory (DFT), has been used to design and synthesize hydrogen evolution catalysts. DFT was used to calculate the hydrogen adsorption energy on a series of single-element, bimetallic, and trimetallic (Au, Pt, Ni, and Cu) substrates to provide leads that could be synthesized in the form of alloy or phase-separated particles via SPBCL. PtAuCu (18 nm, â¼1:1:1 stoichiometry) has been identified as a homogeneous alloy phase that behaves as an effective hydrogen evolution catalyst in acidic aqueous media, even when it is made in bulk form via solution phase methods. Significantly, the bulk-prepared PtAuCu/C nanocatalyst discovered via this process exhibits an activity seven times higher than that of the state-of-the-art commercial Pt/C catalyst (based upon Pt content). The advantage of using SPBCL in the discovery process is that one can uniformly make particles, each consisting of a uniform phase combination (e.g., all alloy or all phase-segregated species) at a fixed elemental ratio, an important consideration when working with polyelemental species where multiple phases may exist.
RESUMO
Ammonia is a crucial component in the production of fertilizers and various nitrogen-based compounds. Now, the lithium-mediated nitrogen reduction reaction (Li-NRR) has emerged as a promising approach for ammonia synthesis at ambient conditions. The proton shuttle plays a critical role in the proton transfer process during Li-NRR. However, the structure-activity relationship and design principles for effective proton shuttles have not yet been established in practical Li-NRR systems. Here, we propose a general procedure for verifying a true proton shuttle and established design principles for effective proton shuttles. We systematically evaluate several classes of proton shuttles in a continuous-flow reactor with hydrogen oxidation at the anode. Among the tested proton shuttles, phenol exhibits the highest Faradaic efficiency of 72 ± 3% towards ammonia, surpassing that of ethanol, which has been commonly used so far. Experimental investigations including operando isotope-labelled mass spectrometry proved the proton-shuttling capability of phenol. Further mass transport modeling sheds light on the mechanism.
RESUMO
Utilization of in situ/operando methods with broad beams and localized probes has accelerated our understanding of fluid-surface interactions in recent decades. The closed-cell microchips based on silicon nitride (SiNx) are widely used as "nanoscale reactors" inside the high-vacuum electron microscopes. However, the field has been stalled by the high background scattering from encapsulation (typically ~100 nanometers) that severely limits the figures of merit for in situ performance. This adverse effect is particularly notorious for gas cell as the sealing membranes dominate the overall scattering, thereby blurring any meaningful signals and limiting the resolution. Herein, we show that by adopting the back-supporting strategy, encapsulating membrane can be reduced substantially, down to ~10 nanometers while maintaining structural resiliency. The systematic gas cell work demonstrates advantages in figures of merit for hitherto the highest spatial resolution and spectral visibility. Furthermore, this strategy can be broadly adopted into other types of microchips, thus having broader impact beyond the in situ/operando fields.
RESUMO
The lithium-mediated nitrogen reduction reaction (Li-NRR) is a promising method for decentralized ammonia synthesis using renewable energy. An organic electrolyte is utilized to combat the competing hydrogen evolution reaction, and lithium is plated to activate the inert N2 molecule. Ethanol is commonly used as a proton shuttle to provide hydrogen to the activated nitrogen. In this study, we investigate the role of ethanol as a proton shuttle in an electrolyte containing tetrahydrofuran and 0.2â M lithium perchlorate. Particularly designed electrochemical experiments show that ethanol is necessary for a good solid-electrolyte interphase but not for the synthesis of ammonia. In addition, electrochemical quartz crystal microbalance (EQCM) demonstrates that the SEI formation at the onset of lithium plating is of specific importance. Chemical batch synthesis of ammonia combined with real-time mass spectrometry confirms that protons can be shuttled from the anode to the cathode by other species even without ethanol. Moreover, it raises questions regarding the electrochemical nature of Li-NRR. Finally, we discuss electrolyte stability and electrochemical electrode potentials, highlighting the role of ethanol on electrolyte degradation.
RESUMO
Ammonia is a critical component in fertilizers, pharmaceuticals, and fine chemicals and is an ideal, carbon-free fuel. Recently, lithium-mediated nitrogen reduction has proven to be a promising route for electrochemical ammonia synthesis at ambient conditions. In this work, we report a continuous-flow electrolyzer equipped with 25-square centimeter-effective area gas diffusion electrodes wherein nitrogen reduction is coupled with hydrogen oxidation. We show that the classical catalyst platinum is not stable for hydrogen oxidation in the organic electrolyte, but a platinum-gold alloy lowers the anode potential and avoids the decremental decomposition of the organic electrolyte. At optimal operating conditions, we achieve, at 1 bar, a faradaic efficiency for ammonia production of up to 61 ± 1% and an energy efficiency of 13 ± 1% at a current density of -6 milliamperes per square centimeter.
RESUMO
Ammonia is a large-scale commodity essential to fertilizer production, but the Haber-Bosch process leads to massive emissions of carbon dioxide. Electrochemical ammonia synthesis is an attractive alternative pathway, but the process is still limited by low ammonia production rate and faradaic efficiency. Herein, guided by our theoretical model, we present a highly efficient lithium-mediated process enabled by using different lithium salts, leading to the formation of a uniform solid-electrolyte interphase (SEI) layer on a porous copper electrode. The uniform lithium-fluoride-enriched SEI layer provides an ammonia production rate of 2.5 ± 0.1 µmol s-1 cmgeo -2 at a current density of -1 A cmgeo -2 with 71% ± 3% faradaic efficiency under 20 bar nitrogen. Experimental X-ray analysis reveals that the lithium tetrafluoroborate electrolyte induces the formation of a compact and uniform SEI layer, which facilitates homogeneous lithium plating, suppresses the undesired hydrogen evolution as well as electrolyte decomposition, and enhances the nitrogen reduction.