Cryoporometry in Femtoliter Volumes by Confocal Raman Spectroscopy.

The properties of porous material are largely dependent on the size, shape, and connectivity of the pores. Here, we present a method based on confocal Raman spectroscopy to quantify porosity using a cryoporometric approach. We show that the phase transition of water imbibed in porous silica can be accurately determined using two different, but complementary methodologies. The first one relies on integrating the temperature-dependent spectral intensities across the whole OH (H2O) or OD (D2O) stretching region. The second, more quantitative approach, deconvolutes the spectral contributions within the pores in terms of liquid and solid fractions. The results show the expected reciprocal dependence of the average phase transition point with pore size, as well as the typical hysteresis between the freezing and melting transitions. One of the key advantages of the confocal Raman approach is its high spatial resolution, with sampling volumes starting from just a few femtoliters, opening the possibility of mapping the structure in heterogeneous porous materials.

Electro-Responsive Surface Composition and Kinetics of an Ionic Liquid in a Polar Oil.

The quartz crystal microbalance (QCM) has been used to study how the interfacial layer of an ionic liquid dissolved in a polar oil at low weight percentages responds to changes in applied potential. The changes in surface composition at the QCM gold surface depend on both the magnitude and sign of the applied potential. The time-resolved response indicates that the relaxation kinetics are limited by the diffusion of ions in the interfacial region and not in the bulk, since there is no concentration dependence. The measured mass changes cannot be explained only in terms of simple ion exchange; the relative molecular volumes of the ions and the density changes in response to ion exclusion must be considered. The relaxation behavior of the potential between the electrodes upon disconnecting the applied potential is more complex than that observed for pure ionic liquids, but a measure of the surface charge can be extracted from the exponential decay when the rapid initial potential drop is accounted for. The adsorbed film at the gold surface consists predominantly of ionic liquid despite the low concentration, which is unsurprising given the surtactant-like structures of (some of) the ionic liquid ions. Changes in response to potential correspond to changes in the relative numbers of cations and anions, rather than a change in the oil composition. No evidence for an electric field induced change in viscosity is observed. This work shows conclusively that electric potentials can be used to control the surface composition, even in an oil-based system, and paves the way for other ion solvent studies.

Quantifying Size Exclusion by Diffusion NMR: A Versatile Method to Measure Pore Access and Pore Size.

Size-exclusion quantification NMR spectroscopy (SEQ-NMR) is introduced for measuring equilibrium distribution coefficients, Keq, in porous media. The porous medium is equilibrated with a polydisperse polymer solution. The original bulk polymer solution and the polymer solution after equilibration but in the absence of the porous medium are analyzed by NMR diffusion experiments. The joint evaluation of the two diffusion attenuation curves under suitable constraints provides the extent by which polymer fractions of particular size were depleted from the solution by pore access. This procedure yields Keq versus polymer probe size, the selectivity curve that in turn can provide the pore size and its distribution. Simulations probe the performance of the method that is demonstrated experimentally in chromatographic media using dextran polymers. SEQ-NMR and inverse size-exclusion chromatography (ISEC) yield selectivity curves that virtually coincide. Crucial advantages with SEQ-NMR, such as versatility with regard to both the polymer used and porous system explored, high speed, potential for automation, and small required sample volume, are discussed.

Block Copolymers as Dispersants for Single-Walled Carbon Nanotubes: Modes of Surface Attachment and Role of Block Polydispersity.

When using amphiphilic polymers to exfoliate and disperse carbon nanotubes in water, the balance between the hydrophobic and hydrophilic moieties is critical and nontrivial. Here, we investigate the mode of surface attachment of a triblock copolymer, Pluronics F127, composed of a central hydrophobic polypropylene oxide block flanked by hydrophilic polyethylene oxide blocks, onto single-walled carbon nanotubes (SWNTs). Crucially, we analyze the composition in dispersant of both the as-obtained dispersion (the supernatant) and the precipitate-containing undispersed materials. For this, we combine the carefully obtained data from 1H NMR peak intensities and self-diffusion and thermogravimetric analysis. The molecular motions behind the observed NMR features are clarified. We find that the hydrophobic blocks attach to the dispersed SWNT surface and remain significantly immobilized leading to 1H NMR signal loss. On the other hand, the hydrophilic blocks remain highly mobile and thus readily detectable by NMR. The dispersant is shown to possess significant block polydispersity that has a large effect on dispersibility. Polymers with large hydrophobic blocks adsorb on the surface of the carbonaceous particles that precipitate, indicating that although a larger hydrophobic block is good for enhancing adsorption, it may be less effective in dispersing the tubes. A model is also proposed that consistently explains our observations in SWNT dispersions and some contradicting findings obtained previously in carbon nanohorn dispersions. Overall, our findings help elucidating the molecular picture of the dispersion process for SWNTs and are of interest when looking for more effective (i.e., well-balanced) polymeric dispersants.

Hydration-Dependent Dynamical Modes in Xyloglucan from Molecular Dynamics Simulation of 13C NMR Relaxation Times and Their Distributions.

Macromolecular dynamics in biological systems, which play a crucial role for biomolecular function and activity at ambient temperature, depend strongly on moisture content. Yet, a generally accepted quantitative model of hydration-dependent phenomena based on local relaxation and diffusive dynamics of both polymer and its adsorbed water is still missing. In this work, atomistic-scale spatial distributions of motional modes are calculated using molecular dynamics simulations of hydrated xyloglucan (XG). These are shown to reproduce experimental hydration-dependent 13C NMR longitudinal relaxation times ( T1) at room temperature, and relevant features of their broad distributions, which are indicative of locally heterogeneous polymer reorientational dynamics. At low hydration, the self-diffusion behavior of water shows that water molecules are confined to particular locations in the randomly aggregated XG network while the average polymer segmental mobility remains low. Upon increasing water content, the hydration network becomes mobile and fully accessible for individual water molecules, and the motion of hydrated XG segments becomes faster. Yet, the polymer network retains a heterogeneous gel-like structure even at the highest level of hydration. We show that the observed distribution of relaxations times arises from the spatial heterogeneity of chain mobility that in turn is a result of heterogeneous distribution of water-chain and chain-chain interactions. Our findings contribute to the picture of hydration-dependent dynamics in other macromolecules such as proteins, DNA, and synthetic polymers, and hold important implications for the mechanical properties of polysaccharide matrixes in plants and plant-based materials.

Propofol adsorption at the air/water interface: a combined vibrational sum frequency spectroscopy, nuclear magnetic resonance and neutron reflectometry study.

Propofol is an amphiphilic small molecule that strongly influences the function of cell membranes, yet data regarding interfacial properties of propofol remain scarce. Here we consider propofol adsorption at the air/water interface as elucidated by means of vibrational sum frequency spectroscopy (VSFS), neutron reflectometry (NR), and surface tensiometry. VSFS data show that propofol adsorbed at the air/water interface interacts with water strongly in terms of hydrogen bonding and weakly in the proximity of the hydrocarbon parts of the molecule. In the concentration range studied there is almost no change in the orientation adopted at the interface. Data from NR show that propofol forms a dense monolayer with a thickness of 8.4 Å and a limiting area per molecule of 40 Å2, close to the value extracted from surface tensiometry. The possibility that islands or multilayers of propofol form at the air/water interface is therefore excluded as long as the solubility limit is not exceeded. Additionally, measurements of the 1H NMR chemical shifts demonstrate that propofol does not form dimers or multimers in bulk water up to the solubility limit.

Acceleration of diffusion in ethylammonium nitrate ionic liquid confined between parallel glass plates.

Diffusion of EAN confined between polar glass plates separated by a few micrometers is higher by a factor of ca. 2 as compared to bulk values. Formation of a new phase, different to the bulk, was suggested.

Assessing 2D electrophoretic mobility spectroscopy (2D MOSY) for analytical applications.

Electrophoretic displacement of charged entity phase modulates the spectrum acquired in electrophoretic NMR experiments, and this modulation can be presented via 2D FT as 2D mobility spectroscopy (MOSY) spectra. We compare in various mixed solutions the chemical selectivity provided by 2D MOSY spectra with that provided by 2D diffusion-ordered spectroscopy (DOSY) spectra and demonstrate, under the conditions explored, a superior performance of the former method. 2D MOSY compares also favourably with closely related LC-NMR methods. The shape of 2D MOSY spectra in complex mixtures is strongly modulated by the pH of the sample, a feature that has potential for areas such as in drug discovery and metabolomics. Copyright © 2016 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

The premolten layer of ice next to a hydrophilic solid surface: correlating adhesion with molecular properties.

In order to establish the potential correlation between the macroscopic ice adhesion and the molecular properties of the premolten layer (PML), the adhesion strength between ice and hydrophilic silica has been measured as a function of temperature. In addition, temperature-dependent molecular properties have been determined using techniques that are sensitive to different aspects of the PML, specifically total internal reflection (TIR) Raman, vibrational sum frequency (VSFS) and NMR spectroscopies. The ice shear adhesion strength was observed to increase linearly with decreasing temperature until -25 °C, where a plateau marked the adhesive strength having reached the cohesive strength of ice. Interestingly, at temperatures higher than -20 °C the ice samples slid on smooth (Ra < 0.4 nm) silica surfaces. This sliding behavior was not observed on rougher silica surfaces (Ra ∼ 6 nm). By varying the penetration depth of the evanescent field, TIR Raman was used to establish an upper limit to the thickness of the PML in contact with silica (<3 nm even at -0.3 K below the bulk melting temperature). Additional quantitative determination of the temperature-dependent thickness of the PML was obtained from 2H NMR measurements in mesoporous silica particles. Finally, the inherently surface specific technique, VSFS, which probed changes in the hydrogen bond environment, indicated at approximately -25 °C the onset of PML, followed by a marked structural change occurring just a fraction of a degree below the melting temperature. Jointly, the experimental approaches link, strongly and consistently, ice adhesion to the PML properties. Specifically, it is inferred that the premolten layer facilitates sliding and contributes to the observed friction behavior, provided its thickness is comparable to the surface roughness of the underlying silica substrate.

Ion transport in polycarbonate based solid polymer electrolytes: experimental and computational investigations.

Among the alternative host materials for solid polymer electrolytes (SPEs), polycarbonates have recently shown promising functionality in all-solid-state lithium batteries from ambient to elevated temperatures. While the computational and experimental investigations of ion conduction in conventional polyethers have been extensive, the ion transport in polycarbonates has been much less studied. The present work investigates the ionic transport behavior in SPEs based on poly(trimethylene carbonate) (PTMC) and its co-polymer with ε-caprolactone (CL) via both experimental and computational approaches. FTIR spectra indicated a preferential local coordination between Li(+) and ester carbonyl oxygen atoms in the P(TMC20CL80) co-polymer SPE. Diffusion NMR revealed that the co-polymer SPE also displays higher ion mobilities than PTMC. For both systems, locally oriented polymer domains, a few hundred nanometers in size and with limited connections between them, were inferred from the NMR spin relaxation and diffusion data. Potentiostatic polarization experiments revealed notably higher cationic transference numbers in the polycarbonate based SPEs as compared to conventional polyether based SPEs. In addition, MD simulations provided atomic-scale insight into the structure-dynamics properties, including confirmation of a preferential Li(+)-carbonyl oxygen atom coordination, with a preference in coordination to the ester based monomers. A coupling of the Li-ion dynamics to the polymer chain dynamics was indicated by both simulations and experiments.

NMR longitudinal relaxation enhancement in metal halides by heteronuclear polarization exchange during magic-angle spinning.

Orders of magnitude decrease of (207)Pb and (199)Hg NMR longitudinal relaxation times T1 upon magic-angle-spinning (MAS) are observed and systematically investigated in solid lead and mercury halides MeX2 (Me = Pb, Hg and X = Cl, Br, I). In lead(ii) halides, the most dramatic decrease of T1 relative to that in a static sample is in PbI2, while it is smaller but still significant in PbBr2, and not detectable in PbCl2. The effect is magnetic-field dependent but independent of the spinning speed in the range 200-15 000 Hz. The observed relaxation enhancement is explained by laboratory-frame heteronuclear polarization exchange due to crossing between energy levels of spin-1/2 metal nuclei and adjacent quadrupolar-spin halogen nuclei. The enhancement effect is also present in lead-containing organometal halide perovskites. Our results demonstrate that in affected samples, it is the relaxation data recorded under non-spinning conditions that characterize the local properties at the metal sites. A practical advantage of fast relaxation at slow MAS is that spectral shapes with orientational chemical shift anisotropy information well retained can be acquired within a shorter experimental time.

High-resolution magic angle spinning (1) H NMR measurement of ligand concentration in solvent-saturated chromatographic beads.

A method based on (1) H high-resolution magic angle spinning NMR has been developed for measuring concentration accurately in heterogeneous materials like that of ligands in chromatography media. Ligand concentration is obtained by relating the peak integrals for a butyl ligand in the spectrum of a water-saturated chromatography medium to the integral of the added internal reference. The method is fast, with capacity of 10 min total sample preparation and analysis time per sample; precise, with a reproducibility expressed as 1.7% relative standard deviation; and accurate, as indicated by the excellent agreement of derived concentration with that obtained previously by (13) C single-pulse excitation MAS NMR. The effects of radiofrequency field inhomogeneity, spin rate, temperature increase due to spinning, and distribution and re-distribution of medium and reference solvent both inside the rotor during spinning and between bulk solvent and pore space are discussed in detail. © 2016 The Authors Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.

Dispersing Carbon Nanotubes with Ionic Surfactants under Controlled Conditions: Comparisons and Insight.

A fundamental understanding of the mechanisms involved in the surfactant-assisted exfoliation and dispersion of carbon nanotubes (CNTs) in water calls for well-controlled experimental methodologies and reliable comparative metrics. We have assessed the ability of several ionic surfactants to disperse single and multiwalled carbon nanotubes, resorting to a stringently controlled sonication-centrifugation method for the preparation of the dispersions. The CNT concentration was accurately measured for a wide range of surfactant concentration, using combined thermogravimetric analysis and UV-vis spectroscopy. The obtained dispersibility curves yield several quantitative parameters, which in turn allow for the effects of nanotube morphology and surfactant properties (aromatic rings, chain length, headgroup charge, and cmc) to be assessed and rationalized, both in terms of dispersed nanotube mass and surface area. The data also indicate that the CNT-surfactant association follows patterns that are markedly different from other equilibrium processes governed by hydrophobicity (such as micellization); in particular, the surfactant concentration needed for maximum dispersibility, c(s,max), and the number of surfactant molecules per unit CNT area at c(s,max) are shown to depend linearly on chain length. The results further suggest that the presence of micelles in the exfoliation process is not a key factor either for starting CNT dispersibility or attaining its saturation value.

Nanostructural effects on polymer and water dynamics in cellulose biocomposites: (2)h and (13)c NMR relaxometry.

Improved moisture stability is desired in cellulose biocomposites. In order to clarify nanostructural effects, a new approach is presented where water and polymer matrix mobilities are characterized separately. Nanocomposites from cellulose nanofibers (CNF) in the xyloglucan (XG) biopolymer matrix are investigated at different hydration states. Films of XG, CNF, and CNF/XG composites are subjected to detailed (2)H and (13)C NMR relaxation studies. Since the (2)H NMR signal arises from heavy water and the (13)C signal from the polysaccharides, molecular water and polymer dynamics is for the first time investigated separately. In the neat components, (2)H transverse relaxation (T2) data are consistent with water clustering at the CNF fibril surfaces, but bulk spread of moisture in XG. The new method results in a description of water interaction with the nanoscale phases. At low hydration, water molecules at the CNF/XG interface exhibit higher water mobility than in neat CNF or XG, due to locally high water concentration. At the same time, CNF-associated interphase segments of XG show slower NMR-dynamics than that in neat XG.

Ion association in aqueous and non-aqueous solutions probed by diffusion and electrophoretic NMR.

The results of diffusion and electrophoretic NMR (eNMR) measurements are reported for a series of tetramethylammonium (TMA) electrolytes (with sulphate, fluoride, acetate, chloride, bromide, nitrate, iodide and perchlorate as anions) in deuterated solvents such as water, dimethylsulphoxide (DMSO), acetonitrile, methanol and ethanol. In addition, similar data are presented for aqueous solutions of tetraalkylammonium salts with increasing alkyl chain length. The combination of diffusion NMR and eNMR yields the effective charge for the TMA cation. Relative to the nominal charge of znom = 1 of TMA, the effective charge in the different solvents is found to be progressively smaller in the order water > DMSO > methanol > acetonitrile > ethanol. A part of this observed trend is ascribed to regular ion-ion interactions incorporated in the Onsager limiting law. Indeed, in solvents with high dielectric constants such as water, DMSO and methanol, the Onsager limiting law describes well the observations for all tetraalkylammonium ions. For ethanol and acetonitrile, there is a significant difference between the experimental data and the expected limiting-law behavior that is attributed to ion association (ion pairing) not taken into consideration by the Onsager limiting law.

¹³C SPE MAS measurement of ligand concentration in compressible chromatographic beads.

A method for measuring the ligand concentration in heterogeneous materials like chromatography media is described. In this method, (13)C single pulse excitation magic angle spinning NMR experiment with broadband (1)H decoupling is used to determine the peak integrals for a butyl ligand in the spectrum of a dried chromatography medium. Within a carefully controlled protocol, those integrals compared with that of the internal reference compound dimethyl sulfone provide the required volume concentration with an accuracy of ca 2%. The effects of temperature, degree of hydration, and other experimental parameters are discussed.

Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase.

Recycling plastics is the key to reaching a sustainable materials economy. Biocatalytic degradation of plastics shows great promise by allowing selective depolymerization of man-made materials into constituent building blocks under mild aqueous conditions. However, insoluble plastics have polymer chains that can reside in different conformations and show compact secondary structures that offer low accessibility for initiating the depolymerization reaction by enzymes. In this work, we overcome these shortcomings by microwave irradiation as a pre-treatment process to deliver powders of polyethylene terephthalate (PET) particles suitable for subsequent biotechnology-assisted plastic degradation by previously generated engineered enzymes. An optimized microwave step resulted in 1400 times higher integral of released terephthalic acid (TPA) from high-performance liquid chromatography (HPLC), compared to original untreated PET bottle. Biocatalytic plastic hydrolysis of substrates originating from PET bottles responded to 78 % yield conversion from 2 h microwave pretreatment and 1 h enzymatic reaction at 30 °C. The increase in activity stems from enhanced substrate accessibility from the microwave step, followed by the administration of designer enzymes capable of accommodating oligomers and shorter chains released in a productive conformation.

Fast Depolymerization of PET Bottle Mediated by Microwave Pre-Treatment and An Engineered PETase.

Invited for this month's cover is the groups of Prof. Minna Hakkarainen, Prof. István Furó and Assoc. Prof. Per-Olof Syrén at KTH Royal Institute of Technology. The image shows how microwave irradiation is an efficient pre-treatment method of polyethylene terephthalate (PET) for subsequent biocatalytic depolymerization. The Research Article itself is available at 10.1002/cssc.202300742.

Quantifying mass transport during polarization in a Li ion battery electrolyte by in situ 7Li NMR imaging.

Poor mass transport in the electrolyte of Li ion batteries causes large performance losses in high-power applications such as vehicles, and the determination of transport properties under or near operating conditions is therefore important. We demonstrate that in situ (7)Li NMR imaging in a battery electrolyte can directly capture the concentration gradients that arise when current is applied. From these, the salt diffusivity and Li(+) transport number are obtained within an electrochemical transport model. Because of the temporal, spatial, and chemical resolution it can provide, NMR imaging will be a versatile tool for evaluating electrochemical systems and methods.

Water as an Intrinsic Structural Element in Cellulose Fibril Aggregates.

While strong water association with cellulose in plant cell walls and man-made materials is well-established, its molecular scale aspects are not fully understood. The thermodynamic consequences of having water molecules located at the microfibril-microfibril interfaces in cellulose fibril aggregates are therefore analyzed by molecular dynamics simulations. We find that a thin layer of water molecules at those interfaces can be in a state of thermal equilibrium with water surrounding the fibril aggregates because such an arrangement lowers the free energy of the total system. The main reason is enthalpic: water at the microfibril-microfibril interfaces enables the cellulose surface hydroxyls to experience a more favorable electrostatic environment. This enthalpic gain overcomes the entropic penalty from strong immobilization of water molecules. Hence, those particular water molecules stabilize the cellulose fibril aggregates, akin to the role of water in some proteins. Structural and functional hypotheses related to this finding are presented.