RESUMO
Tendons are mechanosensitive connective tissues responsible for the connection between muscles and bones by transmitting forces that allow the movement of the body, yet, with advancing age, tendons become more prone to degeneration followed by injuries. Tendon diseases are one of the main causes of incapacity worldwide, leading to changes in tendon composition, structure, and biomechanical properties, as well as a decline in regenerative potential. There is still a great lack of knowledge regarding tendon cellular and molecular biology, interplay between biochemistry and biomechanics, and the complex pathomechanisms involved in tendon diseases. Consequently, this reflects a huge need for basic and clinical research to better elucidate the nature of healthy tendon tissue and also tendon aging process and associated diseases. This chapter concisely describes the effects that the aging process has on tendons at the tissue, cellular, and molecular levels and briefly reviews potential biological predictors of tendon aging. Recent research findings that are herein reviewed and discussed might contribute to the development of precision tendon therapies targeting the elderly population.
Assuntos
Traumatismos dos Tendões , Idoso , Humanos , Tendões/fisiologia , Fenômenos Biomecânicos , Envelhecimento/fisiologiaRESUMO
Tendon mimetic scaffolds that recreate the tendon hierarchical structure and niche have increasing potential to fully restore tendon functionality. However, most scaffolds lack biofunctionality to boost the tenogenic differentiation of stem cells. In this study, we assessed the role of platelet-derived extracellular vesicles (EVs) in stem cells' tenogenic commitment using a 3D bioengineered in vitro tendon model. First, we relied on fibrous scaffolds coated with collagen hydrogels encapsulating human adipose-derived stem cells (hASCs) to bioengineer our composite living fibers. We found that the hASCs in our fibers showed high elongation and cytoskeleton anisotropic organization, typical of tenocytes. Moreover, acting as biological cues, platelet-derived EVs boosted the hASCs' tenogenic commitment, prevented phenotypic drift, enhanced the deposition of the tendon-like extracellular matrix, and induced lower collagen matrix contraction. In conclusion, our living fibers provided an in vitro system for tendon tissue engineering, allowing us to study not only the tendon microenvironment but also the influence of biochemical cues on stem cell behavior. More importantly, we showed that platelet-derived EVs are a promising biochemical tool for tissue engineering and regenerative medicine applications that are worthy of further exploration, as paracrine signaling might potentiate tendon repair and regeneration.
Assuntos
Adipócitos , Tecido Adiposo , Humanos , Diferenciação Celular , Células-Tronco , Engenharia Tecidual , Colágeno , Alicerces Teciduais/químicaRESUMO
Tendon injuries represent over 30-50% of musculoskeletal disorders worldwide, yet the available therapies do not provide complete tendon repair/regeneration and full functionality restoring. Extracellular vesicles (EVs), membrane-enclosed nanoparticles, have emerged as the next breakthrough in tissue engineering and regenerative medicine to promote endogenous tissue regeneration. Here, we developed a 3D human in vitro model mimicking the signature of pathological tendon and used it to evaluate the influence that different platelet-derived EVs might have in tendon tissue repair mechanisms. For this, different EV populations isolated from platelets, small EVs (sEVs) and medium EVs (mEVs), were added to the culture media of human tendon-derived cells (hTDCs) cultured on isotropic nanofibrous scaffolds. The platelet-derived EVs increased the expression of tenogenic markers, promoted a healthy extracellular matrix (ECM) remodeling, and the synthesis of anti-inflammatory mediators. These findings suggest that platelet EVs provided relevant biochemical cues that potentiated a recovery of hTDCs phenotype from a diseased to a healthy state. Thus, this study opens new perspectives for the translation of platelet-derived EVs as therapeutics.
Assuntos
Vesículas Extracelulares , Doenças Musculoesqueléticas , Plaquetas , Vesículas Extracelulares/metabolismo , Humanos , Doenças Musculoesqueléticas/metabolismo , Medicina Regenerativa , TendõesRESUMO
Platelet lysates (PL) contain a selection of proteins and growth factors (GFs) that are known to mediate cell activity. Many of these biomolecules have been identified as chemoattractants with the capacity to induce cell migration. In order to effectively deliver and retain these biomolecules to the site of injury, a scaffold containing PL could be an option. We use poly(ethylene glycol) (PEG) hydrogels consisting of 90 vol % PL to investigate their migratory potential on human mesenchymal stem cells (hMSCs). Cells exposed to these hydrogels were tracked, resulting in cell trajectories and detailed migratory parameters (velocity, Euclidean distance, directness, and forward migration index). Volumetric swelling ratios, hydrogel mechanical properties, and the release kinetics of proteins and GFs from hydrogels were also assessed. Furthermore, hMSC spheroids were encapsulated within the hydrogels to qualitatively assess cell invasion by means of sprouting and disintegration of the spheroid. Cell spheroids encapsulated within the PL-PEG gels exhibited initial outgrowths and eventually colonized the 3D matrix successfully. Results from this study confirmed that hMSCs exhibit directional migration toward the PL-loaded hydrogel with increased velocity and directness, compared to the controls. Overall, the incorporation of PL renders the PEG hydrogel bioactive. This study demonstrates the capacity of PL-loaded hydrogel constructs to attract stem cells for endogenous tissue engineering purposes.
Assuntos
Quimiotaxia , Células-Tronco Mesenquimais , Humanos , Hidrogéis , Polietilenoglicóis , Células-Tronco , Engenharia TecidualRESUMO
The currently used hemostatic agents are highly effective in stopping hemorrhages but have a limited role in the modulation of the wound-healing environment. Herein, we propose an intrinsically bioactive hemostatic cryogel based on platelet lysate (PL) and aldehyde-functionalized cellulose nanocrystals (a-CNCs). PL has attracted great attention as an inexpensive milieu of therapeutically relevant proteins; however, its application as a hemostatic agent exhibits serious constraints (e.g., structural integrity and short shelf-life). The incorporation of a-CNCs reinforced the low-strength PL matrix by covalent cross-linking its amine groups that exhibit an elastic interconnected porous network after full cryogelation. Upon blood immersion, the PL-CNC cryogels absorbed higher volumes of blood at a faster rate than commercial hemostatic porcine gelatin sponges. Simultaneously, the cryogels released biomolecules that increased stem cell proliferation, metabolic activity, and migration as well as downregulated the expression of markers of the fibrinolytic process. In an in vivo liver defect model, PL-CNC cryogels showed similar hemostatic performance in comparison with gelatin sponges and normal material-induced tissue response upon subcutaneous implantation. Overall, owing to their structure and bioactive composition, the proposed PL-CNC cryogels provide an alternative off-the-shelf hemostatic and antibacterial biomaterial with the potential to deliver therapeutically relevant proteins in situ.
Assuntos
Criogéis , Nanocompostos , Animais , Gelatina , Hemostasia , Suínos , CicatrizaçãoRESUMO
In the field of tissue engineering and regenerative medicine, hydrogels are used as biomaterials to support cell attachment and promote tissue regeneration due to their unique biomimetic characteristics. The use of natural-origin materials significantly influenced the origin and progress of the field due to their ability to mimic the native tissues' extracellular matrix and biocompatibility. However, the majority of these natural materials failed to provide satisfactory cues to guide cell differentiation toward the formation of new tissues. In addition, the integration of technological advances, such as 3D printing, microfluidics and nanotechnology, in tissue engineering has obsoleted the first generation of natural-origin hydrogels. During the last decade, a new generation of hydrogels has emerged to meet the specific tissue necessities, to be used with state-of-the-art techniques and to capitalize the intrinsic characteristics of natural-based materials. In this review, we briefly examine important hydrogel crosslinking mechanisms. Then, the latest developments in engineering natural-based hydrogels are investigated and major applications in the field of tissue engineering and regenerative medicine are highlighted. Finally, the current limitations, future challenges and opportunities in this field are discussed to encourage realistic developments for the clinical translation of tissue engineering strategies.
Assuntos
Produtos Biológicos/química , Hidrogéis/química , Medicina Regenerativa/métodos , Engenharia Tecidual/métodos , Motivos de Aminoácidos , Animais , Anisotropia , Colágeno/química , Elastina/química , Matriz Extracelular , Humanos , Ácido Hialurônico/química , Íons , Ligantes , Metais/química , Microfluídica , Nanotecnologia , Peptídeos/química , Polímeros/química , Polissacarídeos/química , Impressão Tridimensional , Medicina Regenerativa/instrumentação , Eletricidade Estática , Engenharia Tecidual/instrumentaçãoRESUMO
Most tissues of the human body present hierarchical fibrillar extracellular matrices (ECMs) that have a strong influence over their physicochemical properties and biological behavior. Of great interest is the introduction of this fibrillar structure to hydrogels, particularly due to the water-rich composition, cytocompatibility, and tunable properties of this class of biomaterials. Here, the main bottom-up fabrication strategies for the design and production of hierarchical biomimetic fibrillar hydrogels and their most representative applications in the fields of tissue engineering and regenerative medicine are reviewed. For example, the controlled assembly/arrangement of peptides, polymeric micelles, cellulose nanoparticles (NPs), and magnetically responsive nanostructures, among others, into fibrillar hydrogels is discussed, as well as their potential use as fibrillar-like hydrogels (e.g., those from cellulose NPs) with key biofunctionalities such as electrical conductivity or remote stimulation. Finally, the major remaining barriers to the clinical translation of fibrillar hydrogels and potential future directions of research in this field are discussed.
Assuntos
Materiais Biomiméticos , Hidrogéis , Engenharia Tecidual , Alicerces Teciduais , Humanos , Alicerces Teciduais/química , Hidrogéis/química , Engenharia Tecidual/métodos , Materiais Biomiméticos/química , Animais , Matriz Extracelular/química , Medicina Regenerativa/métodosRESUMO
2-Hydroxyoleic acid (2OHOA) is a synthetic fatty acid with antihypertensive properties that is able to alter structural membranes properties. The main purpose of this study was to analyze the effect of 2OHOA on the membrane architecture in cholesterol (Cho)-rich domains. For this purpose, model membranes mimicking the composition of lipid rafts and PC- or PE-Cho-rich domains were examined in the absence and presence of 2OHOA by synchrotron X-ray diffraction, atomic force microscopy (AFM) and microcalorimetry (DSC) techniques. Our results demonstrate that 2OHOA phase separates from lipid raft domains and affects the lateral organization of lipids in the membrane. In model raft membranes, 2OHOA interacted with the sphingomyelin (SM) gel phase increasing the thickness of the water layer, which should lead to increased bilayer fluidity. The hydrogen binding competition between 2OHOA and Cho could favour the enrichment of 2OHOA in SM domains separated from the SM-Cho domains, resulting in an enhanced phase separation into SM-2OHOA-rich liquid-disordered (non-raft) and SM-Cho-rich liquid-ordered (raft) domains. The segregation into 2OHOA-rich/Cho-poor and 2OHOA-poor/Cho-rich domains was also observed in PC bilayers.
Assuntos
Colesterol/metabolismo , Microdomínios da Membrana/química , Microdomínios da Membrana/efeitos dos fármacos , Ácidos Oleicos/farmacologia , Varredura Diferencial de Calorimetria , Microscopia de Força Atômica , Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Espalhamento a Baixo Ângulo , Esfingomielinas/química , Difração de Raios XRESUMO
The paradigm shift in the endodontic field from replacement toward regenerative therapies has witnessed the ever-growing research in tissue engineering and regenerative medicine targeting pulp-dentin complex in the past few years. Abundant literature on the subject that has been produced, however, is scattered over diverse areas of knowledge. Moreover, the terminology and concepts are not always consensual, reflecting the range of research fields addressing this subject, from endodontics to biology, genetics, and engineering, among others. This fact triggered some misinterpretations, mainly when the denominations of different approaches were used as synonyms. The evaluation of results is not precise, leading to biased conjectures. Therefore, this literature review aims to conceptualize the commonly used terminology, summarize the main research areas on pulp regeneration, identify future trends, and ultimately clarify whether we are really on the edge of a paradigm shift in contemporary endodontics toward pulp regeneration.
RESUMO
Tendinopathies are poorly understood diseases for which treatment remains challenging. Relevant in vitro models to study human tendon physiology and pathophysiology are therefore highly needed. Here we propose the automated 3D writing of tendon microphysiological systems (MPSs) embedded in a biomimetic fibrillar support platform based on cellulose nanocrystals (CNCs) self-assembly. Tendon decellularized extracellular matrix (dECM) was used to formulate bioinks that closely recapitulate the biochemical signature of tendon niche. A monoculture system recreating the cellular patterns and phenotype of the tendon core was first developed and characterized. This system was then incorporated with a vascular compartment to study the crosstalk between the two cell populations. The combined biophysical and biochemical cues of the printed pattern and dECM hydrogel were revealed to be effective in inducing human-adipose-derived stem cells (hASCs) differentiation toward the tenogenic lineage. In the multicellular system, chemotactic effects promoted endothelial cells migration toward the direction of the tendon core compartment, while the established cellular crosstalk boosted hASCs tenogenesis, emulating the tendon development stages. Overall, the proposed concept is a promising strategy for the automated fabrication of humanized organotypic tendon-on-chip models that will be a valuable new tool for the study of tendon physiology and pathogenesis mechanisms and for testing new tendinopathy treatments.
RESUMO
Free triterpenic acids (TTPs) present in plants are bioactive compounds exhibiting multiple nutriceutical activities. The underlying molecular mechanisms have only been examined in part and mainly focused on anti-inflammatory properties, cancer and cardiovascular diseases, in all of which TTPs frequently affect membrane-related proteins. Based on the structural characteristics of TTPs, we assume that their effect on biophysical properties of cell membranes could play a role for their biological activity. In this context, our study is focused on the compounds, oleanolic (3ß-hydroxy-12-oleanen-28-oic acid, OLA), maslinic (2α,3ß-dihydroxy-12-oleanen-28-oic acid, MSL) and ursolic ((3ß)-3-hydroxyurs-12-en-28-oic acid, URL) as the most important TTPs present in orujo olive oil. X-ray diffraction, differential scanning calorimetry, (31)P nuclear magnetic resonance and Laurdan fluorescence data provide experimental evidence that OLA, MSL and URL altered the structural properties of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and DPPC-Cholesterol (Cho) rich membranes, being located into the polar-hydrophobic interphase. Specifically, in DPPC membranes, TTPs altered the structural order of the L(ß'), phase without destabilizing the lipid bilayer. The existence of a nonbilayer isotropic phase in coexistence with the liquid crystalline L(α) phase, as observed in DPPC:URL samples, indicated the presence of lipid structures with high curvature (probably inverted micelles). In DPPC:Cho membranes, TTPs affected the membrane phase properties increasing the Laurdan GP values above 40°C. MSL and URL induced segregation of Cho within the bilayer, in contrast to OLA, that reduced the structural organization of the membrane. These results strengthen the relevance of TTP interactions with cell membranes as a molecular mechanism underlying their broad spectrum of biological effects.
Assuntos
Membrana Celular/química , Membrana Celular/metabolismo , Lipídeos de Membrana/química , Lipídeos de Membrana/metabolismo , Triterpenos Pentacíclicos/farmacologia , Plantas/química , Varredura Diferencial de Calorimetria , Membrana Celular/efeitos dos fármacos , Colesterol/química , Colesterol/metabolismo , Bicamadas Lipídicas/química , Bicamadas Lipídicas/metabolismo , Espectroscopia de Ressonância Magnética , Fosfatidilcolinas/química , Fosfatidilcolinas/metabolismoRESUMO
Tendinopathy is a multi-faceted pathology characterized by alterations in tendon microstructure, cellularity and collagen composition. Challenged by the possibility of regenerating pathological or ruptured tendons, the healing mechanisms of this tissue have been widely researched over the past decades. However, so far, most of the cellular players and processes influencing tendon repair remain unknown, which emphasizes the need for developing relevant in vitro models enabling to study the complex multicellular crosstalk occurring in tendon microenvironments. In this review, we critically discuss the insights on the interaction between tenocytes and the other tendon resident cells that have been devised through different types of existing in vitro models. Building on the generated knowledge, we stress the need for advanced models able to mimic the hierarchical architecture, cellularity and physiological signaling of tendon niche under dynamic culture conditions, along with the recreation of the integrated gradients of its tissue interfaces. In a forward-looking vision of the field, we discuss how the convergence of multiple bioengineering technologies can be leveraged as potential platforms to develop the next generation of relevant in vitro models that can contribute for a deeper fundamental knowledge to develop more effective treatments.
Assuntos
Traumatismos dos Tendões , Engenharia Tecidual , Colágeno , Humanos , Traumatismos dos Tendões/patologia , Traumatismos dos Tendões/terapia , Tendões/patologia , Tendões/fisiologia , Tenócitos/patologiaRESUMO
Extracellular vesicles (EVs) have emerged as cell-free nanotherapeutic agents for the potential treatment of multiple diseases and for tissue engineering and regenerative medicine strategies. Nevertheless, the field has typically relied on EVs derived from stem cells, the production of which in high quantities and high reproducibility is still under debate. Platelet-derived EVs were produced by a freeze-thaw method of platelet concentrates, a highly available clinical waste material. The aim of this study was to produce and thoroughly characterize platelet-derived EVs and understand their effects in adipose-tissue derived stem cells (hASCs), endothelial cells (HUVECs) and macrophages. Two different EV populations were obtained after differential centrifugation, namely small EVs (sEVs) and medium EVs (mEVs), which showed different size distributions and unique proteomic signatures. EV interaction with hASCs resulted in the modulation of the gene expression of markers related to their commitment toward different lineages. Moreover, mEVs showed higher angiogenic potential than sEVs, in a tube formation assay with HUVECs. Also, the EVs were able to modulate macrophage polarization. Altogether, these results suggest that platelet-derived EVs are promising candidates to be used as biochemical signals or therapeutic tools in tissue engineering and regenerative medicine approaches.
Assuntos
Vesículas Extracelulares , Células-Tronco Mesenquimais , Meios de Cultura , Células Endoteliais , Vesículas Extracelulares/metabolismo , Células-Tronco Mesenquimais/metabolismo , Proteômica , Reprodutibilidade dos TestesRESUMO
Clinically relevant in vitro models of human tissue's health and disease are urgently needed for a better understanding of biological mechanisms essential for the development of novel therapies. Herein, physiological (healthy) and pathological (disease) tendon states are bioengineered by coupling the biological signaling of platelet lysate components with controlled 3D architectures of electrospun microfibers to drive the fate of human tendon cells in different composite living fibers (CLFs). In the CLFs-healthy model, tendon cells adopt a high cytoskeleton alignment and elongation, express tendon-related markers (scleraxis, tenomodulin, and mohawk) and deposit a dense tenogenic matrix. In contrast, cell crowding with low preferential orientation, high matrix deposition, and phenotypic drift leading to increased expression of nontendon related and fibrotic markers, are characteristics of the CLFs-diseased model. This diseased-like profile, also reflected in the increase of COL3/COL1 ratio, is further evident by the imbalance between matrix remodeling and degradation effectors, characteristic of tendinopathy. In summary, microengineered 3D in vitro models of human tendon healthy and diseased states are successfully fabricated. Most importantly, these innovative and versatile microphysiological models offer major advantages over currently used systems, holding promise for drugs screening and development of new therapies.
Assuntos
Tendões , Engenharia Tecidual , Engenharia Biomédica , Diferenciação Celular , Humanos , Tendões/metabolismoRESUMO
Dental implants, usually made of titanium, are exposed to hostile oral microflora that facilitate bacterial infections and subsequent inflammation. To mitigate these processes, we coated titanium substrates with block copolymer nanopatterns and investigated the bactericidal effect of these coatings against Gram-positive and Gram-negative bacteria. We found that the bactericidal efficacy of the coatings depends on their morphology and surface chemistry as well as on the bacterial strain: an optimal combination can lead to significant bacterial death for a short time, i.e. 90% for 90 min. Human gingival fibroblasts in contact with the nanopatterned coatings showed similar cell attachment and morphology as on bare Ti. Immunostaining assays showed similar levels of CCR7 and CD206 in macrophages cultured over the nanopatterns and bare Ti, demonstrating adequate properties for tissue integration. The nanopatterns induced a small increase in macrophage aspect ratio, which might indicate early states of M2 polarization, given the absence of CD206.
Assuntos
Implantes Dentários , Titânio , Humanos , Titânio/farmacologia , Titânio/química , Antibacterianos/farmacologia , Antibacterianos/química , Propriedades de Superfície , Bactérias Gram-Negativas , Bactérias Gram-PositivasRESUMO
Bioengineered human skeletal muscle tissues have emerged in the last years as newin vitrosystems for disease modeling. These bioartificial muscles are classically fabricated by encapsulating human myogenic precursor cells in a hydrogel scaffold that resembles the extracellular matrix. However, most of these hydrogels are derived from xenogenic sources, and the culture media is supplemented with animal serum, which could interfere in drug testing assays. On the contrary, xeno-free biomaterials and culture conditions in tissue engineering offer increased relevance for developing human disease models. In this work, we used human platelet lysate (PL)-based nanocomposite hydrogels (HUgel) as scaffolds for human skeletal muscle tissue engineering. These hydrogels consist of human PL reinforced with aldehyde-cellulose nanocrystals (a-CNC) that allow tunable mechanical, structural, and biochemical properties for the 3D culture of stem cells. Here, we developed hydrogel casting platforms to encapsulate human muscle satellite stem cells in HUgel. The a-CNC content was modulated to enhance matrix remodeling, uniaxial tension, and self-organization of the cells, resulting in the formation of highly aligned, long myotubes expressing sarcomeric proteins. Moreover, the bioengineered human muscles were subjected to electrical stimulation, and the exerted contractile forces were measured in a non-invasive manner. Overall, our results demonstrated that the bioengineered human skeletal muscles could be built in xeno-free cell culture platforms to assess tissue functionality, which is promising for drug development applications.
Assuntos
Hidrogéis , Desenvolvimento Muscular , Animais , Matriz Extracelular/química , Humanos , Hidrogéis/química , Músculo Esquelético , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Bone is a vascularized organic-inorganic composite tissue that shows a heavily-mineralized extracellular matrix (ECM) on the nanoscale. Herein, the nucleation of calcium phosphates during the biomineralization process was mimicked using negatively-charged cellulose nanocrystals (CNCs). These mineralized-CNCs were combined with platelet lysate to produce nanocomposite scaffolds through cryogelation to mimic bone ECM protein-mineral composite nature and take advantage of the bioactivity steaming from platelet-derived biomolecules. The nanocomposite scaffolds showed high microporosity (94-95%), high elasticity (recover from 75% strain cycles), injectability, and modulated platelet-derived growth factors sequestration and release. Furthermore, they increased alkaline phosphatase activity (up to 10-fold) and up-regulated the expression of bone-related markers (up to 2-fold), without osteogenic supplementation, demonstrating their osteoinductive properties. Also, the scaffolds promoted the chemotaxis of endothelial cells and enhanced the expression of endothelial markers, showing proangiogenic potential. These results suggest that the mineralized nanocomposite scaffolds can enhance bone regeneration by simultaneously promoting osteogenesis and angiogenesis.
Assuntos
Nanopartículas , Alicerces Teciduais , Biomimética , Regeneração Óssea , Diferenciação Celular , Celulose/farmacologia , Células Endoteliais , Nanopartículas/química , Osteogênese , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
The application of additive manufacturing in the biomedical field has become a hot topic in the last decade owing to its potential to provide personalized solutions for patients. Different bioinks have been designed trying to obtain a unique concoction that addresses all the needs for tissue engineering and drug delivery purposes, among others. Despite the remarkable progress made, the development of suitable bioinks which combine printability, cytocompatibility, and biofunctionality is still a challenge. In this sense, the well-established synthetic and functionalization routes to prepare nanoparticles with different functionalities make them excellent candidates to be combined with polymeric systems in order to generate suitable multi-functional bioinks. In this review, we briefly discuss the most recent advances in the design of functional nanocomposite hydrogels considering their already evaluated or potential use as bioinks. The scientific development over the last few years is reviewed, focusing the discussion on the wide range of functionalities that can be incorporated into 3D bioprinted constructs through the addition of multifunctional nanoparticles in order to increase their regenerative potential in the field of tissue engineering.
Assuntos
Materiais Biocompatíveis/química , Hidrogéis/química , Tinta , Nanopartículas/química , Engenharia Tecidual , HumanosRESUMO
Decellularized extracellular matrices (ECMs) are able to provide the necessary and specific cues for remodeling and maturation of tissue-specific cells. Nevertheless, their use for typical biofabrication applications requires chemical modification or mixing with other polymers, mainly due to the limited viscoelastic properties. In this study, we hypothesize that a bioink exclusively based on decellularized kidney ECM (dKECM) could be used to bioprint renal progenitor cells. To address these aims, porcine kidneys were decellularized, lyophilized and digested to yield a viscous solution. Then, the bioprinting process was optimized using an agarose microparticle support bath containing transglutaminase for enzymatic crosslinking of the dKECM. This methodology was highly effective to obtain constructs with good printing resolution and high structural integrity. Moreover, the encapsulation of primary renal progenitor cells resulted in high cell viability, with creation of 3D complex structures over time. More importantly, this tissue-specific matrix was also able to influence cellular growth and differentiation over time. Taken together, these results demonstrate that unmodified dKECM bioinks have great potential for bioengineering renal tissue analogs with promising translational applications and/or forin vitromodel systems. Ultimately, this strategy may have greater implications on the biomedical field for the development of bioengineered substitutes using decellularized matrices from other tissues.
Assuntos
Bioimpressão , Engenharia Tecidual , Animais , Matriz Extracelular , Rim , Impressão Tridimensional , Suínos , Alicerces TeciduaisRESUMO
Metallic implants are widely used in diverse clinical applications to aid in recovery from lesions or to replace native hard tissues. However, the lack of integration of metallic surfaces with soft tissue interfaces causes the occurrence of biomaterial-associated infections, which can trigger a complicated inflammatory response and, ultimately, implant failure. Here, a multifunctional implant surface showing nanoscale anisotropy, based on the controlled deposition of cellulose nanocrystals (CNC), and biological activity derived from platelet lysate (PL) biomolecules sequestered and presented on CNC surface, is proposed. The anisotropic radial nanopatterns are produced on polished titanium surfaces by spin-coating CNC at high speed. Furthermore, CNC surface chemistry allows to further sequester and form a coating of bioactive molecules derived from PL. The surface anisotropy provided by CNC guides fibroblasts growth and alignment up to 14 days of culture. Moreover, PL-derived biomolecules polarize macrophages toward the M2-like anti-inflammatory phenotype. These results suggest that the developed multifunctional surfaces can promote soft tissue integration to metallic implants and, at the same time, prevent bacterial invasion, tissue inflammation, and failure of biomedical metallic implants.