Molecular Design of a Metal-Nitrosyl Ferroelectric with Reversible Photoisomerization.

The development of photo-responsive ferroelectrics whose polarization may be remotely controlled by optical means is of fundamental importance for basic research and technological applications. Herein, we report the design and synthesis of a new metal-nitrosyl ferroelectric crystal (DMA)(PIP)[Fe(CN)5(NO)] (1) (DMA = dimethylammonium, PIP = piperidinium) with potential phototunable polarization via a dual-organic-cation molecular design strategy. Compared to the parent non-ferroelectric (MA)2[Fe(CN)5(NO)] (MA = methylammonium) material with a phase transition at 207 K, the introduction of larger dual organic cations both lowers the crystal symmetry affording robust ferroelectricity and increases the energy barrier of molecular motions, endowing 1 with a large polarization of up to 7.6 µC cm-2 and a high Curie temperature (Tc) of 316 K. Infrared spectroscopy shows that the reversible photoisomerization of the nitrosyl ligand is accomplished by light irradiation. Specifically, the ground state with the N-bound nitrosyl ligand conformation can be reversibly switched to both the metastable state I (MSI) with isonitrosyl conformation and the metastable state II (MSII) with side-on nitrosyl conformation. Quantum chemistry calculations suggest that the photoisomerization significantly changes the dipole moment of the [Fe(CN)5(NO)]2- anion, thus leading to three ferroelectric states with different values of macroscopic polarization. Such optical accessibility and controllability of different ferroelectric states via photoinduced nitrosyl linkage isomerization open up a new and attractive route to optically controllable macroscopic polarization.

Structure and Properties of Cork-Silica Xerogel Nanocomposites: Influence of the Cork Content.

Environmentally friendly nanocomposites were synthesized from a silica precursor and cork under mild conditions and dried at atmospheric pressure. Because of the covalent bonding between the components, these CorSil nanocomposites are homogeneous, light (apparent density in the range 360-750 kg m-3), machinable, with the Shore D hardness up to 67 and compressive strength up to 22.6 MPa. These properties place them as good replacements for wood, other natural products, and thermoplastic polymers, with the advantage of being flame-retardant. The influence of the cork content and grain size on the structure, porosity, and mechanical properties of the nanocomposites was studied using infrared spectroscopy, sorption isotherms, compressive strength, and Shore D hardness measurements.

Field-scale evaluation of water fluxes and manure solution leaching in feedlot pen soils.

Accumulation of beef cattle manure on feedlot pen surfaces generates large amounts of dissolved solutes that can be mobilized by water fluxes, affecting surface and groundwater quality. Our objective was to examine the long-term impacts of a beef cattle feeding operation on water fluxes and manure leaching in feedlot pens located on sandy loam soils of the subhumid Sandy Pampa region in Argentina. Bulk density, gravimetric moisture content, and chloride concentration were quantified. Rain simulation trials were performed to estimate infiltration and runoff rates. Using chloride ion as a tracer, profile analysis techniques were applied to estimate the soil moisture flux and manure conservative chemical components leaching rates. An organic stratum was found over the surface of the pen soil, separated from the underlying soil by a highly compacted thin layer (the manure-soil interface). The soil beneath the organic layer showed greater bulk density in the A horizon than in the control soil and had greater moisture content. Greater concentrations of chloride were found as a consequence of the partial sealing of the manure-soil interface. Surface runoff was the dominant process in the feedlot pen soil, whereas infiltration was the main process in control soil. Soil moisture flux beneath pens decreased substantially after 15 yr of activity. The estimated minimum leaching rate of chloride was 13 times faster than the estimated soil moisture flux. This difference suggests that chloride ions are not exclusively transported by advective flow under our conditions but also by solute diffusion and preferential flow.

Simulation and optimization of a lamella settler for cattle feedlot wastewater treatment and nutrients recovery. Experimental validation in the field.

Cattle concentrated animal feeding operations (feedlots), whose number has grown considerably in the last years, generate large volumes of wastewaters with a high organic load. The wastewaters are formed by rainfall-runoff of the accumulated manure and may contain hormones and antibiotics, which hampers the use of biological treatments. In this work, the feasibility of continuous separation of the suspended colloidal organic matter and nutrients to clarify the liquid and recover the solid is studied. A flocculation sedimentation system using a decentralized lamella settler is proposed, optimized and further tested in the field. Computational fluid dynamic (CFD) simulation is used to analyze the motion of the liquid and suspended inertial particles representing the formed flocs, for optimizing the settler. The simulations helped in the design of the bench-scale unit tested in the field. The clarified liquid was characterized to analyze its use for fertigation. The proposed treatment allowed excellent removal of organic matter (~98% chemical oxygen demand, and almost complete turbidity) and phosphorus (~95%). Organic nitrogen was partially removed (~70%) and ammonia nitrogen mostly remained in the liquid. Spectral characterization of the clarified liquid suggests that the remaining organic nitrogen is related to soluble protein-like compounds.

The infrared spectrum of solid L-alanine: influence of pH-induced structural changes.

The influence of the pH on the infrared spectrum of L-alanine has been analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. The amino acid was precipitated from aqueous solutions and dried at 36.5 degrees C, in order to stabilize cationic L-alanine or alaninium [CH3CH(NH3(+))COOH] at pH 1, the zwitterionic form [CH3CH(NH3(+))COO(-)] at pH 6, and anionic L-alanine or alaninate [CH3CH(NH2)COO(-)] at pH 13. New insight on the specific inter and intramolecular interactions in the different forms of L-alanine was reached by a novel methodological approach: an infrared technique not used before to analyze solid amino acid samples (DRIFTS), in combination with a detailed analysis based on spectral deconvolution. The frequency ranges of interest include the carbonyl/carboxyl stretching and amine deformation modes and the OH/NH stretching modes. It was shown that intermolecular hydrogen bonds between the NH3(+) and COO(-) groups are predominant in the zwitterionic form, whereas in cationic L-alanine, H bonds between the COOH groups are responsible for the formation of dimers. In anionic L-alanine, only strong electrostatic interactions between the COO(-) groups and Na(+) ions are proposed, evidencing the relevant role of the counterion.

Microdomains in mixed monolayers of oleanolic and stearic acids: thermodynamic study and BAM observation at the air-water interface and AFM and FTIR analysis of LB monolayers.

Monolayers of oleanolic acid (OLA) mixed with stearic acid (SA) were studied at the air-water interface. The surface pressure-area (pi-A) isotherms, measured over the whole composition range, and BAM observations were used to investigate the phase behaviour and self-organization of these components in a two-dimensional structure. Pure OLA forms a very compressible monolayer, and BAM observation revealed the coexistence of large and irregular solid domains of different thickness dispersed in a gas matrix, compatible with the two most probable orientations of the OLA molecule at the interface. Mixtures of OLA/SA form condensed monolayers from low surface pressures and the thermodynamic analysis indicates that OLA molecules, in the presence of the long-chain SA, orient with the major axis almost perpendicular to the interface. Langmuir-Blodgett (LB) monolayers of pure SA and mixtures were further characterized by atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). AFM images of LB mixed monolayers evidenced microphase separation, not observable by BAM. The SA rich domains are 4-6A thicker than those rich in OLA. The FTIR spectra of mixed LB films on CaF2 substrates showed that OLA does not perturb the all-trans conformation of the SA long alkyl chains, up to a mole fraction of 0.4. The carbonyl-stretching band of OLA suggests that the carboxylic groups of neighbour OLA molecules are involved in hydrogen bonds, forming dimers, as in pure solid phase OLA. These interactions seem to prevail over the OLA-water hydrogen bonds.

Spectroscopic Methods for Quantifying Gabapentin: Framing the Methods without Derivatization and Application to Different Pharmaceutical Formulations.

This work aimed at analyzing the performance of direct spectroscopic methods for the quantification of gabapentin (GABAp), given the lack of previous studies, in comparison with the more reviewed and complex derivatization techniques, discussing their susceptibility to the pharmaceutical formulations. All of the methods analyzed showed high selectivity for this pharmaceutical analyte, with recoveries close to 100%. Absorption spectroscopy without derivatization yielded better sensitivity and lower limits of detection and quantification of gabapentin in aqueous solution (AqSol method) when compared with other solvents, such as acidic solution or ethanol/water mixture. Derivatization with sodium hypochlorite presented the highest precision, whereas derivatization with vanillin exhibited the highest accuracy. The best method for GABAp quantification in terms of highest sensitivity, lowest limits of detection, and quantification, and also with good precision and accuracy, proved to be fluorescence with derivatization by 4-chloro-7-nitrobenzofurazan. The effect of the pharmaceutical formulation (nature of excipients) was tested for the most robust and sensitive methods, with and without derivatization, on capsules of five commercial brands. Recoveries in the range of 97.9-101.5% proved that there are no matrix interfering effects. Although not presenting the best performance in all the parameters evaluated, the AqSol method, due to its simplicity, proved to be suitable for the quantification of GABAp in capsules and tables containing the molecule as the active ingredient.

Microplastics effects in Scrobicularia plana.

One of the most common plastics in the marine environment is polystyrene (PS) that can be broken down to micro sized particles. Marine organisms are vulnerable to the exposure to microplastics. This study assesses the effects of PS microplastics in tissues of the clam Scrobicularia plana. Clams were exposed to 1mgL-1 (20µm) for 14days, followed by 7days of depuration. A qualitative analysis by infrared spectroscopy in diffuse reflectance mode period detected the presence of microplastics in clam tissues upon exposure, which were not eliminated after depuration. The effects of microplastics were assessed by a battery of biomarkers and results revealed that microplastics induce effects on antioxidant capacity, DNA damage, neurotoxicity and oxidative damage. S. plana is a significant target to assess the environmental risk of PS microplastics.

The problem of 2,4,6-trichloroanisole in cork planks studied by attenuated total reflection infrared spectroscopy: proof of concept.

Attenuated total reflection infrared spectroscopy (ATR-IR) proved to be a promising detection technique for 2,4,6-trichloroanisole (TCA), which confers organoleptic defects to bottled alcoholic beverages, allowing the proposal of a criterion for cork plank acceptance when meant for stopper production. By analysis of a significant number of samples, it was proved that the presence of TCA, even in very low concentrations, imparts subtle changes to the cork spectra, namely, the growth of two new bands at ∼1417 (νC═C of TCA ring) and 1314 cm­1 (a shifted νCC of TCA) and an increase in the relative intensities of the bands at ∼1039 cm­1 (δCO of polysaccharides) and ∼813 cm­1 (τCH of suberin), the latter by overlapping with intense bands of TCA. These relative intensities were evaluated in comparison to a fingerprint of suberin (νasC­O­C), at 1161 cm­1. On the basis of those spectral variables, a multivariate statistics linear analysis (LDA) was performed to obtain a discriminant function that allows classifying the samples according to whether they contain or not TCA. The methodology proposed consists of a demanding acceptance criterion for cork planks destined for stopper production (with the guarantee of nonexistence of TCA) that results from combining the quantitative results with the absence of the two TCA correlated bands. ATR infrared spectroscopy is a nondestructive and easy to apply technique, both on cork planks and on stoppers, and has proven more restrictive than other techniques used in the cork industry that analyze the cleaning solutions. At the level of proof of concept, the method here proposed is appealing for high-value stopper applications.

Interactions between DNA purines and ruthenium ammine complexes within nanostructured sol-gel silica matrixes.

The interactions between DNA purines (guanine and adenine) and three ruthenium ammine complexes (hexaammineruthenium(III) chloride, hexaammineruthenium(II) chloride, and ruthenium-red) were studied in a confined environment, within sol-gel silica matrixes. Two encapsulation methods were rehearsed (differing in temperature and condensation pH), in order to analyze the effects of the sol-gel processes on the purines and on the Ru complexes separately. The extent of decomposition of the Ru complexes, as well as the interactions established with the purine bases, proved to be determined by the coencapsulation method. Combined results by diffuse reflectance UV-vis and infrared spectroscopies showed that, when coencapsulation is carried out at 60 degrees C, specific H bonding interactions are established between the amine group of Ade and the ammine groups of the Ru complex or the hydroxo group of an early decomposition product. These are responsible for the important role of the purine in inhibiting the oxidation reactions of the Ru(II) and Ru(III) complexes. In contrast, Gua establishes preferential H bonds with the matrix (mainly due to the carbonyl group), leading to higher yields in the final oxidation products of the Ru complexes, namely, trimers and dimers. Direct covalent bonding of either purine to the metal was not observed.

Phase behaviour of oleanolic acid, pure and mixed with stearic acid: Interactions and crystallinity.

The phase behaviour of pure oleanolic acid (OLA) and in mixtures with stearic acid (SA) was characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and nuclear magnetic resonance (NMR). The crystalline OLA as received (OLA(ar)) becomes amorphous after being dissolved in chloroform and vacuum-dried at 50 degrees C (OLA(50)). Upon heating, both forms transform to the needle shape crystalline form (OLA(220)). Dimerization through H-bonding between COOH groups was detected both in OLA(ar) and OLA(220). Dimers are stronger in OLA(220), where H-bonding also involves the alcohol groups and plays a role in the crystalline organization. A eutectic type phase diagram was established for mixtures, with the eutectic composition close to pure SA. Mixtures rich in SA are miscible in the liquid and in the amorphous solid states, where the presence of SA-OLA co-dimers, formed through H-bonding between carboxyl groups, was detected. Miscibility and SA crystallinity decrease drastically with the OLA content.

Encapsulation of ruthenium nitrosylnitrate and DNA purines in nanostructured sol-gel silica matrices.

The interactions between DNA purines (guanine and adenine) and the ruthenium complex Ru(NO)(NO(3))(3) were studied within nanostructured silica matrices prepared by a two-step sol-gel process. By infrared analysis in diffuse reflectance mode, it was proved that encapsulation induces a profound modification on the complex, whereas guanine and adenine preserve their structural integrity. The complex undergoes nitrate ligand exchange and co-condenses with the silica oligomers, but the nitrosyl groups remain stable, which is an unusual behavior in Ru nitrosyl complexes. In turn, the doping molecules affect the sol-gel reactions and eventually the silica structure as it forms: the complex yields a microporous structure, and the purine bases are responsible for the creation of macropores due to hydrogen bonding with the silanol groups of the matrix. In a confined environment, the interactions are much stronger for the coencapsulated pair guanine complex. While adenine only establishes hydrogen bonds or van der Waals interactions with the complex, guanine bonds covalently to Ru by one N atom of the imidazole ring, which becomes strongly perturbed, resulting in a deformation of the complex geometry.

Phase behaviour of oleanolic acid/stearyl stearate binary mixtures in bulk and at the air-water interface.

The solid-liquid phase behaviour of oleanolic acid (OLA)/stearyl stearate (SS) was investigated by differential scanning calorimetry and polarizing optical microscopy. A eutectic type diagram, with the eutectic composition close to pure SS was obtained. Complementary studies by NMR, X-ray diffraction (XRD) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy were performed. A mutual influence was detected in mixtures: the low melting form of SS is favoured at low OLA molar fractions (X(OLA)) and spherulitic structures appear at high X(OLA) and high temperature. Additionally, H-bonding between OLA carbonyl groups increases in the presence of SS. The study of OLA/SS by the Langmuir method and Brewster angle microscopy revealed the organization at the air-water interface: OLA interacts with water in the first layer, while SS is completely segregated to the upper layer for X(OLA)>0.3, and it distributes in the first and upper layers for X(OLA)<0.3.

Interactions of L-alanine with alumina as studied by vibrational spectroscopy.

The interactions of L-alanine with gamma- and alpha-alumina have been investigated by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). L-alanine/alumina samples were dried from aqueous suspensions, at 36.5 degrees C, with two amino acid concentrations (0.4 and 0.8 mmol g-1) and at different pH values (1, 6, and 13). The vibrational spectra proved that the nature of L-alanine interactions with both aluminas is the same (hydrogen bonding), although the groups involved depend on the L-alanine form and on alumina surface groups, both controlled by the pH. For samples prepared at pH 1, cationic L-alanine [CH3CH(NH3+)COOH] displaces physisorbed water from alumina, and strong hydrogen bonds are established between the carbonyl groups of alanine, as electron donors, and the surface Al-OH2+ groups of alumina. This occurs at the expense of alanine dimer dissociation and breaking of intramolecular bonds. When samples are prepared at pH 6, the interacting groups are Al-OH2+ and the carboxylate groups of zwitterionic L-alanine [CH3CH(NH3+)COO-]. The affinity of L-alanine toward alumina decreases, as the strong NH3+...-OOC intermolecular hydrogen bonds prevail over the interactions with alumina. Thus, for a load of 0.8 mmol g-1, phase segregation is observed. On alpha-alumina, crystal deposition is even observed for a load of 0.4 mmol g-1. At pH 13, the carboxylate groups of anionic L-alanine [CH3CH(NH2)COO-] are not affected by alumina. Instead, hydrogen bond interactions occur between NH2 and the Al-OH surface groups of the substrate. Complementary N2 adsorption-desorption isotherms showed that adsorption of L-alanine occurs onto the alumina pore network for samples prepared at pH 1 and 13, whereas at pH 6 the amino acid/alumina interactions are not strong enough to promote adsorption. The mesoporous structure and the high specific surface area of gamma-alumina make it a more efficient substrate for adsorption of L-alanine. For each alumina, however, it is the nature of the specific interactions and not the porosity of the substrate that determines the adsorption process.