Improvement of bone repair with l-PRF and bovine bone in calvaria of rats. histometric and immunohistochemical study.

OBJECTIVES: The effect of leucocyte- and platelet-rich fibrin (L-PRF), associated with DBBM (deproteinized bovine bone mineral; Bio-Oss®) was investigated and compared with autogenous bone graft as a standard material for filling bone defects. MATERIAL AND METHODS: A defect of 5 mm in diameter was performed in 40 calvaria of rats. The animals were divided into 5 groups and received blood clot (CO), autogenous bone (AUT), DBBM (BIO), L-PRF, or DBBM associated with L-PRF (BIO-LPRF). After 4 and 8 weeks, bone regeneration was assessed by histometric and immunohistochemical analyses. RESULTS: The highest mean percentage of bone formation found at 4 and 8 weeks was observed for the BIO-L-PRF group (54.0% ± 2.8 and 63.6% ± 2.2). The lowest mean percentage at 4 and 8 weeks was observed for the CO group (16.7% ± 2.5 and 20.5% ± 1.0). There was statistical similarity among the AUT, BIO, and L-PRF groups. The expressions OC, RUNX 2, and VEGF showed a favorable aspect in the formation of new bone for BIO-L-PRF. VEGF was the marker with the highest expression because it was related to the initial healing process, promoting the migration and proliferation of endothelial cells in the region of the defect. Even after weeks, VEGF maintained a moderate expression. CONCLUSIONS: The association of L-PRF with DBBM improved bone repair when these biomaterials were inserted into the defects of the calvaria of rats. CLINICAL RELEVANCE: This reinforces the good performance of bovine bone and L-PRF as filler materials, especially when associated.

Postoperative Complications in Craniomaxillofacial Reconstruction With Medpor.

Bone reconstruction in craniofacial surgery is a challenge for surgeons, who most commonly adopt the autogenous bone grafting and alloplastic implants in such procedures. Among the alloplastic materials, the high-density porous polyethylene is highlighted-Medpor (Medpor, Porex Surgical Inc, Newman, GA), considered to be pure polyethylene, with only 1 manufacturing process and standard pore size. The purpose of the current study has been to present through a review of literature and the types of complications derived from the use of Medpor in craniomaxillofacial bone surgery. A specific and sensitive database was initially created via PubMed, focusing on studies published in English peer-reviewed journals between 2004 and 2014, including case reports, experimental studies in humans, and prospective and retrospective studies. Forty articles were found at PubMed database. After analyzing their abstracts, 19 were selected, totaling 1453 patients and 121 complications, being the most commonly reported diplopia with 56 patients and infection with 6 patients. Most of the complications reported in the articles used for the development of the current review are not directly related to the use of the Medpor implant. The only complications directly related to the use of this biomaterial were cases of infection.

Sagittal mandibular osteotomy for removal of intraosseous lesion.

The ramus sagittal split osteotomy or mandibular body is an established technique for correction of dentofacial deformities but can have an accurate indication in cases requiring surgical access to remove lesions or more teeth included in the region of the mandibular angle. The main advantages of this technique are the possibility of preservation of the inferior alveolar nerve bundle and significant reduction in postoperative morbidity. In this article, the authors show a case in which the sagittal osteotomy of the mandible was used to gain access for removal of a lesion (complex odontoma).

Unilateral condylar hyperplasia: a treatment strategy.

Condylar hyperplasia (CH) is a pathologic condition that causes overdevelopment of the condylar head and neck as well as the mandible. Slowly progressive unilateral enlargement of the head and the neck of the condyle causes crossbite malocclusion, facial asymmetry, and shifting of the midpoint of the chin to the unaffected side. The etiology and the pathogenesis of CH remain uncertain. The diagnosis is made by clinical and radiologic examinations and bone scintigraph. A difference in uptake of 10% or more between condyles is regarded as indicative of CH, and the affected condyles had a relative uptake of 55% or more. When the diagnosis of active CH is established, the treatment consists of removal of the growth center by a partial condylectomy. The authors present the case of a 46-year-old male patient with right active type II CH or hemimandibular hyperplasia who underwent a high condylectomy.

Guided implant surgery: what is the influence of this new technique on bone cell viability?

PURPOSE: To evaluate the effect of implant osteotomy on immediate bone cell viability, comparing guided surgery for implant placement with the classic drilling procedure. MATERIALS AND METHODS: For this study, 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG) and were then divided into 4 subgroups--subgroups 1, 2, 3, and 4--corresponding to drills used 10, 20, 30, and 40 times, respectively. All animals received 5 osteotomies in each tibia, by use of the classic drilling procedure in one tibia and guided surgery in the other tibia. The osteotomized areas were removed and processed immunohistochemically for detection of osteocalcin, receptor activator of nuclear factor κB ligand (RANKL), osteoprotegerin (OPG), and caspase 3. RESULTS: Immunohistochemical analysis showed that osteocalcin expression was initially higher in the CG and remained constant after drill reutilization. Although the expressions of RANKL and OPG were not statistically different for the GG and CG, the RANKL/OPG ratio tended to be higher for the GG. Moreover, caspase 3 expression was elevated in the GG, proportionally to the number of osteotomies, indicating an increase in the apoptosis index in the GG. CONCLUSIONS: The classic drilling procedure is more favorable to cell viability than guided surgery.

Vascular pericranial graft: a viable resource for frontal sinus obliteration.

Inappropriate treatments of frontal sinus fractures may lead to serious complications, such as mucopyocele, meningitis, and brain abscess. Assessment of nasofrontal duct injury is crucial, and nasofrontal duct injury requires sinus obliteration, which is often accomplished by autologous grafts such as fat, muscle, or bone. These avascular grafts have an increased risk of resorption and infection, as well as donor site morbidity. For these reasons, pericranial flap, which is vascular, should be used for frontal sinus obliteration. The pericranial flap presented with less morbidity procedure and has decreased infection rates, which justifies its use in frontal sinus obliteration. This paper aims to report a case of a comminuted frontal sinus fracture in a 29-year-old man who was successfully treated by frontal sinus obliteration, using pericranial local flap. The patient was followed up postoperatively for 16 months without infection.

Using the "bottom-up and outside-in" sequence for panfacial fracture management: does it provide a clinical significance?

Panfacial fractures usually refer to simultaneous facial fractures, which affect the upper, middle, and lower thirds of the face. The management of panfacial fracture is complex because of the lack of reliable landmarks. Literature has shown many approaches for management of panfacial fractures. Every segment of bone has a precise function in the repair. Therefore, the "bottom-up and outside-in" sequence is the most widely used approach in the management of panfacial fractures. These facial fractures present remarkable challenges for both experienced and inexperienced surgeons. This article aimed to report a case of a panfacial fracture (mandibular condylar and symphysis fractures associated with an atypical Le Fort III fracture) in a 48-year-old man. The patient was successfully treated using bottom-up and outside-in sequence by accessing all facial injuries. Postoperatively, radiograph examination revealed good reduction and fixation of titanium plates, and physical examination revealed good functional and esthetic outcomes.

Anterior pericranial flap for frontal sinus duct obliteration: is it a valuable resource?

Inappropriate treatments of frontal sinus fractures may lead to serious complications, such as mucopyocele, meningitis, and brain abscess. Assessment of nasofrontal duct injury is crucial, and nasofrontal duct injury requires sinus obliteration, which is often accomplished by autogenous grafts such as fat, muscle, or bone. These avascular grafts have an increased risk of resorption and infection and donor site morbidity. For these reasons, pericranial flap, which is vascular, should be used for frontal sinus obliteration. The pericranial flap presented with less morbidity procedure and has decreased infection rates, which justifies its use in frontal sinus obliteration. This study aimed to report a case of a comminuted frontal sinus fracture with a brief literature review, regarding the use of pericranial flap. The authors report a case of a 23-year-old male subject with a severely comminuted fracture of the anterior and posterior walls of the frontal sinus. The patient was successfully treated by cranialization with frontal sinus duct obliteration, using anterior pericranial flap. The patient was followed up for 16 months with no postoperative complication, such as infection. Pericranial flap is a good resource for frontal sinus duct obliteration because it is a durable and well-vascularized flap, which determines low rates of postoperative complications.

Arthrocentesis procedure: using this therapeutic maneuver for TMJ closed lock management.

Temporomandibular joint (TMJ) disorder is a term that encompasses a number of overlapping conditions, such as closed lock. Closed lock of the TMJ is considered a consequence of a nonreducing deformed disc acting as an obstacle to the sliding condylar head that usually causes a decrease in the maximum mouth opening and acute pain. The management of the TMJ is still controversial. Thus, arthrocentesis of the TMJ is a valuable modification of the traditional method of arthroscopic lavage, which consists of washing the joint in order to remove chemical inflammatory mediators and intra-articular adhesions, changing intra-articular pressure. TMJ disorder has always presented as a therapeutic challenge to maxillofacial surgeons. Therefore, this paper aimed to describe a clinical report of a closed lock of the left TMJ in a 19-year-old female subject who was successfully treated by arthrocentesis procedure.

Compromised primary implant stability.

The aim of this study was to evaluate implants installed with compromised primary stability associated or not with polylactide and polyglycolide copolymer (PLA/PGA). Two 0.4-mm overdrilled defects (3 mm in diameter and 6 mm long) were produced in the right tibia of 25 rabbits. Half of the defects were left untreated, and the other half was filled with PLA/PGA. Implants of 2.6 mm in diameter and 6 mm long were placed into all defects. Animals were killed at 5, 15, 40, and 60 postoperative days, and biomechanical analysis (torque-reverse), histomorphometry, and immunohistochemistry (osteoprotegerin, receptor activator of NF-κB ligand [RANKL], osteocalcin, and collagen-1 [COL-I] staining) were performed. All the implants achieved osseointegration. There were no statistically significant differences in the torque-reverse and in linear contact extension between bone tissue and implant surface and no statistically significant difference in osteoprotegerin, RANKL, osteocalcin, and collagen-1 expression between the studied groups in all studied periods (P > 0.05). We can conclude that osseointegration can occur in compromised primary implant stability situations, and the addition of PLA/PGA did not improve the osseointegration process in this experimental model.

Preload evaluation of different screws in external hexagon joint.

PURPOSE: This study compared the maintenance of tightening torque in different retention screw types of implant-supported crowns. MATERIALS AND METHODS: Twelve metallic crowns in UCLA abutments cast with cobalt-chromium alloy were attached to external hexagon osseointegrated implants with different retention screws: group A: titanium alloy retention screw; group B: gold alloy retention screw with gold coating; group C: titanium alloy retention screw with diamond-like carbon film coating; and group D: titanium alloy retention screw with aluminum titanium nitride coating. Three detorque measurements were obtained after torque insertion in each replica. Data were evaluated by analysis of variance (ANOVA), Tukey's test (P < 0.05), and t test (P < 0.05). RESULTS: Detorque value reduced in all groups (P < 0.05). Group A retained the highest percentage of torque in comparison with the other groups (P < 0.05). Groups B and D retained the lowest percentage of torque without statistically significant difference between them (P > 0.05). CONCLUSIONS: All screw types exhibited reduction in the detorque value. The titanium screw maintained the highest percentage of torque whereas the gold-coated screw and the titanium screw with aluminum titanium nitride coating retained the lowest percentage.

Prosthetic platforms in implant dentistry.

The use of implant-supported prosthesis to replace missing teeth became a predictable treatment. Although high success rate has been reported, implant treatment is suitable to complications, failures, and limitations such as peri-implant bone loss after implant loading. Stress evaluation on the bone-abutment-implant interface has been carried out to develop new designs of prosthetic platform and to understand the stress distribution in this interface. Several types of prosthetic platforms are available such as external and internal hexagon, Morse cone connection, and the concept of platform switching. Therefore, this study aimed to critically describe the different options of prosthetic platforms in implant dentistry, by discussing their biomechanical concepts, clinical use, and advantages and disadvantages. It was observed that all types of prosthetic platforms provided high success rate of the implant treatment by following a strict criteria of indication and limitation. In conclusion, a reverse planning of implant treatment is strongly indicated to reduce implant overload, and the use of advanced surgical-prosthetic techniques is required to obtain a long-term success of oral rehabilitations.

Maxillary bone defect reconstruction using porous polyethylene implants.

PURPOSE: The aim of this study was to evaluate the bone repair process in the maxillary sinus in monkeys treated with high-density porous polyethylene (Medpor) METHODS: Four capuchin monkeys (Cebus apella) were submitted to bilateral horizontal osteotomies in the anterior wall of the maxillary sinus and divided into 2 groups: control group, left side with no implants, and porous polyethylene group, right side with Medpor. After a period of 145 days after implant placement, the maxillae were removed for histologic and histometric analyses. RESULTS: Bone repair in osteotomized areas took place by connective tissue in 58.5% and 58.7% in the control group and the porous polyethylene group, respectively. In the contact surface with Medpor, bone repair occurred in 41.3%. CONCLUSIONS: Medpor was not reabsorbed within the period of this study and allowed bone repair surrounding it. The porous polyethylene constitutes a feasible alternative for bone defect reconstruction.

Epidemiologic evaluation of mandibular fractures in the Rio de Janeiro high-complexity hospital.

The aim of this study was to gather data on trauma etiology and mandibular fracture localization in patients who presented at the General Hospital of Nova Iguaçu, Rio de Janeiro, Brazil. From March 2007 to December 2008, 95 patients with mandibular fracture were registered in a medical form, at the Bucomaxillofacial Surgery Department of the General Hospital of Nova Iguaçu, Rio de Janeiro, Brazil. Concerning mandibular fracture etiology, 21.05% were caused by motorcycle accidents, followed by interpersonal violence without use of weapons (punches, kicks, bumps with the head, blows with the elbow, etc) (16.84%) and interpersonal violence with firearm (14.73%). It was found that 52.63% of the patients had a single fracture line. The most affected fracture area was the parasymphysis (26.02%), followed by the condyle (22.60%) and mandibular angle (18.49%). Concerning the injury area, 24.21% were directed to the mandibular symphysis, 22.17% of the patients did not remember the injury area, and 18.94% had multiple injuries. When the injury was directed to the symphysis, the result was more condyle fractures (11.64%), and injuries at the mandibular angle resulted in fractures at the angle itself (8.90%). The most common fracture cause was traffic accidents, mainly motorcycle accidents, and the most affected areas were the parasymphysis and the condyle. The mandible isolated fractures occurred in half of the cases. Motorcycle accidents resulted in more fractures in the parasymphysis area, and when the symphysis area is affected by injuries, the result is a higher percentage in condyle fractures.

Foreign body in preauricular region.

Foreign bodies, although they are often found throughout the body, to a lesser degree in the face, still constitute a diagnostic challenge for the trauma surgeon. Its removal means danger of damaging important facial anatomic structures, even if its exact position from the image data was known. So, the objective is to describe a clinical report of a patient (42 years of age, male sex) who experienced falling to the ground, attended by the Department of Surgery and Traumatology Bucco-Maxillo-Facial Surgery, Faculty of Dentistry of Araçatuba, São Paulo State University, and 2 days after the trauma, he reported difficulty in mouth opening and pain. After clinical evaluation, we observed the presence of injury in the left preauricular region already in the process of healing. During the intraoral physical examination, a limitation of the mouth opening was noted. Radiographic posteroanterior and profile of the face showed 2 radiopaque foreign bodies in the left side, lying apparently at the region of the mandibular condylar process. Under local anesthesia, foreign body removal was carried from there with access to it through the preexisting facial injury. Further clinical examinations showed an improvement in mouth opening, absence of pain complaints, and/or functional complaints.

Occurrence of odontogenic infections in patients treated in a postgraduation program on maxillofacial surgery and traumatology.

This study assessed the occurrence and characteristics of oral and maxillofacial infections in patients treated at a Brazilian oral and maxillofacial emergency service during a 7-year period. The clinical files of all patients treated at the Oral and Maxillofacial Surgery and Traumatology Service of the Araçatuba Dental School, São Paulo State University, Brazil, between 2002 and 2008 were reviewed. From a population of 3645 patients treated in this period, the study sample consisted of 93 subjects who presented odontogenic infections. Data referring to the patients' sex, age, medical history, and the etiology, diagnosis, complications, drug therapy/treatment, and evolution of the pathologic diseases were collected and analyzed using the Epi Info 2000 software. Of these patients, 54 were men (58.1%) and 39 were women (41.9%). Most patients were in the 31- to 40-year-old (20.7%) and 21- to 30-year-old (19.6%) age groups. The most frequent etiology was pulp necrosis due to caries (80.6%). Regarding the treatment, antibiotics were administered to all patients, surgical drainage was done in 75 patients (82.4%), and 44 patients (47.3%) needed hospital admission. First-generation cephalosporin alone or combined with other drugs was the most prescribed antibiotic (n = 26) followed by penicillin G (n = 25). Most patients (n = 85, 91.4%) responded well to the treatment. Five cases had complications: 3 patients needed hospital readmission, 1 case progressed to descending mediastinitis, and 1 patient died. Odontogenic infections can be life-threatening and require hospital admission for adequate patient care. Complications from odontogenic infections, although rare, may be fatal if not properly managed.

Conservative treatment of odontogenic myxoma.

Odontogenic myxomas (OMs) are nonencapsulated rare benign tumors that can occur in gnathic bones. They are locally invasive and have a high recurrence rate. Radiologically, OMs show a multilocular (in the majority of cases) or unilocular radiolucency, with either distinct or poorly defined margins. Histopathologically, OMs are characterized by spindle-, wedge-, or stellate-shaped cells loosely arranged in an abundant mucoid background. Myxomas are mainly asymptomatic. Radical surgery, excision, and enucleation followed by curettage of the surrounding bony tissue have all been advocated as treatment options. This study presents a successful case of conservative treatment of OMs with a 5-year follow-up.

Utilization of surgical trepan for the obtainment of calvarial autogenous bone graft in maxillary reconstructions.

Maxillomandibular reconstructions are traditionally performed by means of autogenous bone grafts collected from intraoral donor areas and extraoral donor areas such as clavicle, iliac bone, rib, and tibia. The calvarial bone has been studied as an alternative donor area, with a low incidence of complications and minimal postoperative morbidity. Complications such as dural lacerations associated with cerebrospinal fluid leakage and extradural and subdural bleeding were minimized due to the use of surgical trepan, allowing the diploic layer delimitation before the osteotomy, preserving the internal calvarial cortical. The purpose of this article is to suggest a new technique for the obtainment of calvarial bone grafts with surgical trepan.