Decolorization, COD and turbidity removal of the raw vinasse effluent by a one-step electro-oxidation process on a Pb/PbO2 anode.

In this research, and for the first time, the application of anode Pb/PbO2 (prepared from combined thermal oxidation and electrochemical oxidation method) and steel cathode in a flow sample electrochemical treatment process of vinasse and in the wastewater of alcohol factories, has been investigated. The combination of electrodes of Pb/PbO2 as an anode, steel, and/or graphite as a cathode was used in the proposed electrochemical treatment setup. The efficiency of the proposed electrochemical treatment was determined by the removal percentage of chemical oxygen demand (COD), turbidity and color of vinasse samples. The response surface method (RSM) by Minitab 18 was used to determine the effect of the studied factors as well as to detect the relationship between variables. The results showed that under optimum conditions (Pb/PbO2 electrode as the anode and steel electrode as the cathode, a voltage of 30 V, pH 6.5, and reaction time of 45 min), the percentage reduction values of COD, turbidity and color were 97.7, 77.3 and 92.7%, respectively.

Studies on influence of process parameters on simultaneous biodegradation of atrazine and nutrients in aquatic environments by a membrane photobioreactor.

A Lab scale algal-bacterial membrane photobioreactor (MPBR) was designed and operated under 12-h light and 12-h dark conditions with a light intensity of 8000lx, in order to investigate the effects of initial concentrations of atrazine, carbon concentration, and hydraulic retention time on the ability of this photobioreactor in simultaneous removal of atrazine and nutrients in the continuous mode. The removal efficiencies of atrazine (ATZ), chemical oxygen demand (COD), phosphorus (PO43--P) and nitrogen (NOx) in optimum condition was more than 95%, 99%, 98% and 97% when the maximum removal rates were 9.5 × 10-3, 99.231, 11.773 and 7.762mg/L-day, respectively. Results showed that the quality of the effluent was reduced by the increase of atrazine concentration. The outcomes on the hydraulic and toxic shocks indicated that the system has a relatively good resistance to the shocks and can return to the stable conditions. Microalgae showed a great deal of interest and capability in cultivating and attaching to the surface of the membrane and bioreactor, and the total biomass accumulated in the system was greater than 6g/L. The kinetic coefficients of atrazine removal were also studied using various kinetic models. The maximum atrazine removal rate was determined by the modified Stover-Kincannon model. The results approved the ability of the MPBR reactor in wastewater treatment and microalgae cultivation and growth. The decline of atrazine concentration in this system could be attributed to the algal-bacterial symbiosis and co-metabolism process. Accordingly, the MPBR reactor is a practical, simple, economical and therefore suitable process for simultaneous biodegradation of chlorinated organic compounds and nutrients removal from aquatic environments.

Evaluation of kenaf fibers as moving bed biofilm carriers in algal membrane photobioreactor.

In this lab-scale study, the feasibility of using kenaf fibers as moving bed biofilm carriers in hybrid microalgal membrane photobioreactors (HMPBR) in organic matter and atrazine elimination from real secondary effluent was evaluated. For evaluating the kinetics of biofilm substrate consumption, an experimental model was proposed. Inoculation of wastewater samples with free carriers resulted in the greater removal of target pollutants. Removal efficiency of atrazine and chemical oxygen demand (COD) increased to 27% and 16%, with respect to the control, respectively. The total biomass accumulation in HMPBR exceeded 5g/L, and the microalgae tended to aggregate and attached to biofilm carriers. The removal efficiency of HMPBR improved significantly via inoculation of kenaf fiber carriers with bioremediation microalgal strains (p < 0.01). A lower stabilization ratio (VSS/TSS) was also recorded. The biomass in HMPBR included more lipids and carbohydrates. The results revealed that kenaf fibers could improve and upgrade the biological activity of different wastewater treatment applications, considering the great potential of biofilm carriers and their effluent quality.

Biodegradation of atrazine from wastewater using moving bed biofilm reactor under nitrate-reducing conditions: A kinetic study.

In this study employed an anoxic moving bed biofilm reactor (AnMBBR) to evaluate the effects of hydraulic and toxic shocks on performance reactor. The results indicated a relatively good resistance of system against exercised shocks and its ability to return to steady-state conditions. In optimal conditions when there was the maximum rate of atrazine and soluble chemical oxygen demand (COD) removal were 74.82% and 99.29% respectively. Also, atrazine biodegradation rapidly declines in AnMBBR from 74% ±â€¯0.05 in the presence of nitrate to 9.12% only 3 days after the nitrate was eliding from the influent. Coefficients kinetics was studied and the maximum atrazine removal rate was determined by modified Stover & Kincannon model (Umax = 9.87 gATZ/m3d). Results showed that AnMBBR is feasible, easy, affordable, so suitable process for efficiently biodegrading toxic chlorinated organic compounds such as atrazine. Also, its removal mechanism in this system is co-metabolism.

Simultaneous removal of atrazine and organic matter from wastewater using anaerobic moving bed biofilm reactor: A performance analysis.

In this study, an anaerobic moving bed biofilm reactor (AMBBR) was designed to biodegrade atrazine under mesophilic (32 °C) condition and then it was evaluated for approximately 1 year. After biofilm formation, acclimation, and enrichment of microbial population within the bioreactor, the effect of various operation conditions such as changes in the concentration of influent atrazine and sucrose, hydraulic retention time (HRT), and salinity on the removal of atrazine and chemical oxygen demand (COD) were studied. In optimum conditions, the maximum removal efficiency of atrazine and COD was 60.5% and 97.4%, respectively. Various models were developed to predict the performance of atrazine removal as a function of HRT during continuous digestion. Also, coefficients kinetics was studied and the maximum atrazine removal rate was determined by Stover - Kincannon model (rmax = 0.223 kgATZ/m3d). Increasing salinity up to 20 g/L NaCl in influent flow could inhibit atrazine biodegradation process strongly in the AMBBR reactor; whereas, the reactor could tolerate the concentrations less than 20 g/L easily. Results showed that AMBBR is feasible, easy, affordable, so suitable process for efficiently biodegrading toxic chlorinated organic compounds such as atrazine. There was no accumulation of atrazine in the biofilm and the loss of atrazine in the control reactor was negligible; this shows that atrazine removal mechanism in this system was due to co-metabolism.

Feasibility of applying the LED-UV-induced TiO2/ZnO-supported H3PMo12O40 nanoparticles in photocatalytic degradation of aniline.

In the present study, TiO2/ZnO-supported phosphomolybdic acid nanoparticles are investigated by the impregnation method, followed by analyzing their photocatalytic activity under UV-LED light and degradation kinetics degrading aniline as an organic pollutant model. Nanoparticle characteristics and the remaining Keggin structure in the nanocomposites were confirmed by means of FESEM, FTIR, and XRD analyses. Heterogenization of phosphomolybdic acid on TiO2 and ZnO nanoparticles resulted in the improved light absorption intensity and decreased band gap of nanocomposites. Photocatalytic degradation of aniline was also improved for composite nanoparticles and reached to 25.62, 43.48, and 38.25% for TiO2/HPMo, ZnO/HPMo, and TiO2/ZnO/HPMo, respectively. Overall, the results showed a good fit to the Langmuir-Hinshelwood kinetic model.

A new recycling technique for the waste tires reuse.

In this series of laboratory experiments, the feasibility of using fixed bed biofilm carriers (FBBC) manufactured from existing reclaimed waste tires (RWTs) for wastewater treatment was evaluated. To assess polyamide yarn waste tires as a media, the fixed bed sequence batch reactor (FBSBR) was evaluated under different organic loading rate (OLRs). An experimental model was used to study the kinetics of substrate consumption in biofilm. Removal efficiency of soluble chemical oxygen demand (SCOD) ranged by 76-98% for the FBSBR compared to 71-96% in a sequencing batch reactor (SBR). Removal efficiency of FBBC was significantly increased by inoculating these RWTs carriers. The results revealed that the sludge production yield (Yobs) was significantly less in the FBSBR compared to the SBR (p < 0.01). It also produced less sludge and recorded a lower stabilization ratio (VSS/TSS). The findings show that the Stover-Kincannon model was the best fit (R2 > 99%) in a FBSBR. Results from this study suggest that RWTs to support biological activity for a variety of wastewater treatment applications as a biofilm carrier have high potential that better performance as COD and TSS removal and sludge settling properties and effluent quality supported these findings.

Effect of Organic Loading Rates on biodegradation of linear alkyl benzene sulfonate, oil and grease in greywater by Integrated Fixed-film Activated Sludge (IFAS).

In this study, performance of Integrated Fixed-film Activated Sludge (IFAS) system in treatment of Linear Alkylbenzene Sulfonate (LAS), and oil & grease in synthetic greywater and effect of Organic Loading Rates (OLRs) on removal efficiency within a period of 105 days were investigated. Present study was carried out in a pilot scale under such conditions as temperature of 30 ± 1 °C, dissolved oxygen of 2.32 ± 0.91 mg/l, pH of 8.01 ± 0.95 and OLRs of 0.11-1.3gCOD/L.d. Also, Scanning Electron Microscopy (SEM) images were employed to specify rate of the biofilm formed on the media inside the reactor IFAS. The best removal efficiency for COD, LAS and oil and grease were respectively obtained as 92.52%, 94.24% and 90.07% in OLR 0.44gCOD/L.d. The assessment of loading rate indicated that with increased OLR to 0.44gCOD/L.d, removal efficiency of COD, oil and grease was increased while with increased OLR, removal efficiency was decreased. In doing so, based on the statistical test ANOVA, such a difference between removal efficiencies in diverse OLRs was significant for COD (p = 0.003), oil and grease (p = 0.01). However, in terms of LAS, with increased value of OLR to 0.44gCOD/L.d, the removal efficiency was increased and then with higher OLRs, removal efficiency was slightly decreased that is insignificant (p = 0.35) based on the statistical test ANOVA. The SEM images also showed that the biofilm formed on the media inside IFAS reactor plays a considerable role in adsorption and biodegradation of LAS, and oil & grease in greywater. The linear relation between inlet COD values and rate of removed LAS indicated that the ratio of inlet COD (mg/L) to removed LAS (mg/L) was 0.4. Therefore, use of IFAS system for biodegradation of LAS, oil and grease in greywater can be an applicable option.

Application of novel Modified Biological Aerated Filter (MBAF) as a promising post-treatment for water reuse: Modification in configuration and backwashing process.

Biological Aerated Filter (BAF) reactors due to their plentiful biomass, high shockability, high efficiency, good filtration, availability and lack of need for large land areas, are enjoying from great importance in advanced wastewater treatment. Therefore, in this study, Polystyrene Coated by Sand (PCS) was produced as a novel media and its application in a modified down-flow BAF structure for advanced wastewater treatment was assessed in two steps. In step one, the backwash effluent did not return to the system, while in step two backwash effluent returned to increase the water reuse efficiency. The backwash process was also studied through three methods of Top Backwashing (TB), Bottom Backwashing (BB), as well as Top and Bottom Backwashing Simultaneously (TBBS). The results showed that return of backwash effluent had no significant effect on the BAF effluent quality. In the second step similar to the first one with slight differences, the residual average concentrations of TSS, BOD5, and COD at the effluent were about 2.5, 8.2, and 25.5 mg/L, respectively. Additionally, in step two, the mean volume of disposal sludge/volume of treated water (vds/vtw) decreased a large extent to about 0.088%. In other words, the water reuse has increased to more than 99.91%. The backwash time in methods of TB and BB were 65 and 35 min, respectively; however, it decreased in TBBS methods to 25 min. The concentrations of most effluent parameters in this system are in concordance with the 2012 EPA Agriculture Standards, even for irrigation of Non-processed agricultural crops and livestock water consumption.

Cardiovascular, respiratory, and total mortality attributed to PM2.5 in Mashhad, Iran.

Poor air quality is one of the most important environmental problems in many large cities of the world, which can cause a wide range of acute and chronic health effects, including partial physiological disorders and cardiac death due to respiratory and cardiovascular diseases. According to the latest edition of the national standard for air quality, maximum contamination level is 15 µg/m(3) per year and 35 µg/m(3) per day. The aim of this study was to evaluate cardiovascular, respiratory, and total mortality attributed to PM2.5 in the city of Mashhad during 2013. To this end, the Air Q model was used to assess health impacts of PM2.5 and human exposure to it. In this model, the attributable proportion of health outcome, annual number of excess cases of mortality for all causes, and cardiovascular and respiratory diseases were estimated. The results showed that the number of excess cases of mortality for all causes and cardiovascular and respiratory diseases attributable to PM2.5 was 32, 263, and 332 µg/m(3), respectively. Moreover, the annual average of PM2.5 in Mashhad was obtained to be 37.85 µg/m(3). This study demonstrated that a high percentage of mortality resulting from this pollutant could be due to the high average concentration of PM2.5 in the city during 2013. In this case, using the particle control methods, such as optimal use of fuel, management of air quality in urban areas, technical inspection of vehicles, faster development of public transport, and use of industrial technology can be effective in reducing air pollution in cities and turning existing situations into preferred ones.

Equilibrium and kinetics of phosphorous adsorption onto bone charcoal from aqueous solution.

Pyrolysis of fresh sheep bone led to the formation of bone charcoal (BC). The structural characteristics of BC and surface area were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). N2 gas adsorption-desorption was analysed by Brunauer-Emmett-Teller isotherm model. The prepared BC was used as an effective sorbent for the removal of phosphate from aqueous solutions. The effect of major parameters, including initial phosphorous concentration, sorbent dosage, pH and temperature, was investigated in this study. Furthermore, adsorption isotherms and kinetics were evaluated. BC was an effective sorbent in phosphate removal from aqueous solution especially in phosphate concentration between 2 and 100 mg/L. The maximum amount of sorption capacity was 30.21 mg/g, which was obtained with 100 mg/L as the initial phosphate concentration and 0.2 g as the sorbent dosage. Best reported pH in this study is 4; in higher pH, adsorption rate decreased dramatically. By increasing the temperature from 20 to 40 degrees C sorption capacity increased; this phenomenon described that adsorption is endothermic. Equilibrium data were analysed by Langmuir, Freundlich and Temkin isotherms. Pseudo first- and second-order and Elovich models were used to determine the kinetics of adsorption in this study. Collected data highly fitted with Freundlich isotherms and pseudo second-order kinetics. Achieved results have shown well the potentiality for the BC to be utilized as a natural sorbent to remove phosphorous from water and wastewater.

Modeling and optimization of direct dyes removal from aqueous solutions using activated carbon produced from sesame shell waste.

Today, there is a significant concern in the industry regarding the disposal of wastewater containing dyes into the environment, so the management and appropriate disposal of these wastes in the environment are considerable. The main aim of this study is to assess the efficiency of activated carbon (AC) prepared from sesame shells to remove direct dyes from aqueous solutions. According to the results, AC prepared from sesame shell had a high specific surface area (525 m2/g) and porous structure. The results demonstrated that the adsorbent had high potential to remove direct dyes as 84.5% of direct brown 103 (DB103), 93.08% of direct red 80 (DR80), 93.37% of direct blue 21 (DB21) and 98.39% of direct blue 199 (DB199) under the optimal conditions of adsorbent dose 4.8 g/L, contact time 19 min, pH 3 and initial dye concentration 12 mg/L. The experimental results showed that kinetic data were best described by the pseudo-second-order model (R2 = 0.989) while isotherm data were best fitted by the Freundlich model (R2 = 0.994). In the present study, not only was the produced waste used as a useful and economically valuable material, but it was also applied as an effective adsorbent to remove direct dyes from industrial effluents and reduce environmental pollution.

Efficiency of Ag3PO4/TiO2 as a heterogeneous catalyst under solar and visible light for humic acid removal from aqueous solution.

Nowadays, the presence of humic acid (HA) in water sources is highly regarded due to the production of extremely harmful byproducts such as trihalomethanes. In this study, the effectiveness of an Ag3PO4/TiO2 catalyst produced by in situ precipitation as a heterogeneous catalyst for the degradation of humic acid in the existence of visible and solar light was evaluated. The Ag3PO4/TiO2 catalyst's structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), after which the catalyst dosage, HA concentration, and pH parameters were adjusted. After a 20-min reaction, the highest HA degradation of 88.2% and 85.9% in presence of solar light and visible light were attained at the ideal operating conditions of 0.2 g/L catalyst, 5 mg/L HA, and pH 3, respectively. It was discovered that, based on kinetic models, the degradation of HA matched both Langmuir-Hinshelwood and pseudo-first-order kinetics at concentrations of 5 to 30 mg/L (R2 > 0.8). The Langmuir-Hinshelwood model had surface reaction rate constants (Kc) of 0.729 mg/L.min and adsorption equilibrium constants (KL-H) of 0.036 L/mg. Eventually, a real-water investigation into the process' effectiveness revealed that, under ideal circumstances, the catalyst had a reasonable HA removal efficiency of 56%.

Prevalence of MRSA as an Infectious Agent in Sanitary Swimming Pools and Jacuzzis.

Introduction: Methicillin-resistant Staphylococcus aureus (MRSA) is considered resistant to beta-lactam antibiotic groups. Infection caused by this strain is more difficult to treat with antibiotics, and hence, it will be more dangerous. This study focused on detecting the mecA gene Staphylococcus in sanitary swimming pools and Jacuzzis in Yazd city, Iran (2019). Also, the relationship between methicillin-resistant Staphylococcus aureus (MRSA) and the water quality standards has been investigated. Materials and Methods: 60 samples were randomly collected in sterile bottles from 20 active pools and Jacuzzis. Quality parameters were analyzed by standard methods. Antibiotic resistance and the mecA gene's presence were detected by the disk diffusion and PCR method, respectively. Results: The results of this study showed that the resistance of Staphylococcus aureus isolates was high against erythromycin (41.20%), tetracycline (35.10%), clindamycin (28.90%), and cefoxitin (25.80%). Out of 97 samples, 9 (25.80%) strains of Staphylococcus aureus were identified as MRSA, 30 samples (30.92%) showed multiple patterns of antibiotic resistance, and 9 samples (9.27%) carried the mecA gene. The results revealed that water quality has greatly impacted the mecA gene strain presence, especially microbial parameters. On the other hand, in the presence of mecA gene strains, the averages of microbial qualities were higher than standard in Jacuzzis; the latter finding was confirmed for swimming pools due to physicochemical parameters. Conclusion: The number of reported sanitary water is increasing, and this study's results are useful examples of these findings. Therefore, a lack of careful and regular monitoring of swimming pools and Jacuzzis can lead to MSRA prevalence and outbreak sources.

Indigenous bacteria as an alternative for promoting recycled paper and cardboard mill wastewater treatment.

The present study aimed to investigate indigenous bacteria possibility in recycled paper and cardboard mill (RPCM) wastewater treatment through the isolation and identification of full-scale RPCM indigenous bacteria. The molecular characterization of the isolated bacteria was performed by 16S rRNA gene sequencing. Klebsiella pneumoniae AT-1 (MZ599583), Citrobacter freundii AT-4 (OK178569), and Bacillus subtilis AT-5 (MZ323975) were dominant strains used for RPCM wastewater bioremediation experiments. Under optimal conditions, the maximum values of chemical oxygen demand (COD) and color biodegradation by C. freundii AT-4 were 79.54% and 43.81% after 10 days of incubation, respectively. In the case of B. subtilis strain AT-5 and K. pneumoniae AT-1, the maximum values of COD and color biodegradation were 70.08%, 45.96%, 71.26%, and 32.06%, respectively. The results from optimal conditions regarding efficiency were higher in comparison with the efficiency obtained from the oxidation ditch treatment unit in full-scale RPCM-WWTP. Therefore, the present study introduces the isolated indigenous bacteria strains as a promising candidate for improving the RPCM-WWTP efficiency using bioremediation.

Evaluation of a novel integrated membrane biological aerated filter for water reclamation: A practical experience.

The use of treated wastewater in addition to solving the problem of water shortage, can increase soil fertility and reduce the use of chemical fertilizers. We aim to provide a high-quality effluent to feed membrane system, reduce treatment costs and enhance the efficiency of wastewater recycling. All experiments were conducted on a novel integrated membrane biological aerated filter (IMBAF) consisting of a down flow cylindrical biological aerated filter (BAF) filled by silica and a novel sand-coated polystyrene granules (SCP), followed by ultrafiltration (UF) and reverse osmosis (RO) membranes. IMBAF reactor, with 73.6 L volume, was operated for 270 days (in three 90-day stages) with different conditions of returning backwash water. Accordingly, BAF generated high quality water for feeding UF membrane with 94.2%, 68%, 54.4%, 91.2%, and 99.95% of turbidity, 5-day biochemical oxygen demand (BOD5), chemical oxygen demand (COD), oil and grease (O&G), fecal coliform (FC) removal, respectively. At the end of stage 3, 99.88% of influent was recycled by UF and only 0.12% was disposed of as sludge. The BAF and UF module efficiently promote the quality of water entering RO system. After 75 days of continuous operation, the increase in trans-membrane pressure (TMP) and also decrease in RO membrane permeability were about 14% and 9.4%, respectively, indicating low clogging of the membrane. The use of BAF structure designed in this study increases the wastewater recycling rate, decreases membrane clogging and thereby reduces the costs of concentrate disposal and chemical cleaning.

Enhanced photocatalytic activity of efficient magnetically recyclable core-shell nanocomposites on 2,2',4,4',5,5'-hexachlorobiphenyl (PCB 153) degradation under UV-LED irradiation.

The congener polychlorinated biphenyls (PCBs) are one of the of persistent organic pollutant compounds that increase lifestyle-related diseases, such as diabetes, obesity, and cancer. So, 2,2',4,4',5,5'-hexachlorobiphenyl (PCB153), which is one of the most common PCB contaminants in nature, was selected as a model compound to study the photocatalytic degradation of Fe3O4@SiO2@TiO2 core-shell structure. In this work, Fe3O4@SiO2@TiO2 nanocomposite was synthesized and characterized using transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of parameters such as catalyst dosage, initial concentration of PCB 153, solution pH, amount of H2O2, and kind of co-solvent on photocatalytic degradation of PCB 153 by the synthesized nanocomposite was investigated. The high degradation efficiency of Fe3O4@SiO2@TiO2 nanocomposite, which was 96.5%, was obtained at 4 g/l of the catalysts, 4 ppm of PCB 153, pH 5, 20 mM H2O2, 2 h of reaction time, and acetone as a cosolvent. Also, the rate of mineralization for Fe3O4@SiO2@TiO2 nanocomposite with H2O2 and UV-LED irradiation was 75.3% which had a significant efficiency compared to control experiments. Moreover, the mentioned photocatalysts are possible to be reused through exposing to external magnetic field, with insignificant decrease in the catalytic activity even after 6 cycles. The photocatalytic degradation process has an effective and environmental friendly effect on the degradation of organic pollutants.

Study of visible-light photocatalytic degradation of 2,4-dichlorophenoxy acetic acid in batch and circulated-mode photoreactors.

PURPOSE: The consumption of pesticides and chemical fertilizers is one of the major environmental and health problems. In this report, 2,4-dichlorophenoxyacetic acid (2,4-D) was chosen to evaluate the impact of photodegradation using LED (Light-emitting diode) (400 and 365 nm) sources in batch and programmable circulated-mode photoreactors respectively. METHODS: A ß-cyclodextrin (ß-CD) grafted titanium dioxide P25 (P25/ß-CD) and complexation of 2,4-D and ß-CD were synthesized via photoinduced and spray-drying methods, respectively. The structures were characterized. Moreover, we investigated the effects of the amount of catalyst, the ß-CD amount on bed catalyst, irradiation time, kind of photoreactor on the photocatalytic degradation efficiency. RESULTS: Based on the results of experiments in batch reactor, the optimum amount of TiO2, ß-CD grafted by catalyst were 1 and 0.1 g/L, respectively. In batch-mode the photodegradation efficiency of 2,4-D after 5 h with P25, P25/ß-CD as a photocatalyst and 2,4-D/ß-CD complex with P25 photocatalyst were approximately 81, 85 and 95% respectively. After 8 h of irradiation in circulated-mode reactor, degradation yields with P25, P25/ß-CD and 2,4-D/ß-CD complex along with P25 were 89, 91 and 96% respectively. On the other hand, the circulated-mode photoreactor with high efficiency was appropriate to degradation of the high concentration of 2,4-D solution (200 mg/L). After 5 successive cycles with 25 h of irradiation, P25 and P25/ß-CD maintained as high 2,4-D removal efficiency as 82.6, 84% respectively, with excellent stability and reusability. CONCLUSION: The photodegradation method can be used as an effective and environmental friendly process in the degradation of organic compound.

Environmental and behavioral determinants affecting the association of airway macrophages carbon load with distance to major roads and traffic density.

Biomarkers are promising indicators to evaluate human exposure to air pollutants and to predict the health outcomes. Area of Airway macrophages that is occupied by Black Carbon could be used as a biomarker of personal long term exposure to traffic related air pollution. Association of airway macrophages carbon load with weighted average distance and environmental and subject-specific behavior are considered in this study. Sputum samples were taken from 160 healthy adult women and airway macrophages carbon load (AMCL) were determined in 93 subjects, which represent a success rate of 62% in sputum induction. Nearest distance of the subjects to major roads and average weighted distance were calculated for each subject. A questionnaire was field according to general and behavioral characteristics of the participants. There was not any significant difference (P-value >0.05) between induced and non-induced subjects. Subjects with indoor kitchen without separation wall, passive smokers and those with longer presence time in high traffic streets showed higher carbon area. Weighted average distance had a better association (ß = -0.186, 95%CI: -0.139, -0.230, P-value = 0.00) with AMCL than nearest distance to major roads (ß = -0.155, 95%CI: -0.109, -0.201, P-value = 0.19). Association of Weighted average distance with AMCL was interrupted in subjects with a garage connected to house environment, those with IK kitchen, those with a hood above the stove and passive smokers. The findings indicated that more generation and distribution of indoor air pollutants can completely enhance the internal exposure and indoor pollution has the same importance as outdoor pollution.

Designing and modeling of a novel electrolysis reactor using porous cathode to produce H2O2 as an oxidant.

The entry of toxic organic pollutants and resistant to biodegradation has increased the concern about human health. The use of advanced oxidation (AO) processes to degrade these pollutants has been developing. One of the AO processes is based on the use of hydrogen peroxide in removing resistant organic pollutants. This study aimed to develop a new reactor capable of producing H2O2 in the solution. Therefore, a porous electrode made of stainless steel with the capability of air injection in the electrode center was used. The 30 cm rod graphite electrodes were also used as an anode electrode in a 4000 ml reactor. The effects of variables, including current density (30-40 mA/cm2), time (10-30 min), and electrolyte concentration (12-17 mM/L) on the amount of H2O2 production were evaluated by Box behenken design under response surface methodology using Design expert software. The results of this study showed that H2O2 can be produced at the electrode surface of porous cathode under optimal conditions of 36 mA/cm2 current density, 16 mM/l electrolyte concentration, in 23 min, and in the amount of 34 ppm. Using a porous cathode electrode causes the maximum contact among the solution, water, and air, and increases the production of H2O2. The release of resistant organic compounds to the waste water is a serious problem to the environment. By the application of the Electro-oxidation (EO)reactor with the ability to produce H2O2, this issue is resolved. Furthermore, this technique is applied for non-selective degradation of the toxic organic compounds. •The electro-oxidation process is a useful method for destruction of persistent organic matter from wastewater.•Due to use of porous cathode in this method, contact between the electrode and the sewage is at its maximum level which increases the efficiency and speed of sewage treatment.•This method can produce H2O2 as a high potential oxidant that can reduce persistent organic properties of sewage and make the wastewater suitable for biological treatment.