MRI-based strain measurements reflect morphological changes following myocardial infarction: A study on the UK Biobank cohort.

In a porcine experimental model of myocardial infarction, a localised, layer-specific, circumferential left ventricular strain metric has been shown to indicate chronic changes in ventricular function post-infarction more strongly than ejection fraction. This novel strain metric might therefore provide useful prognostic information clinically. In this study, existing clinical volume indices, global strains, and the novel, layer-specific strain were calculated for a large human cohort to assess variations in ventricular function and morphology with age, sex, and health status. Imaging and health data from the UK Biobank were obtained, including healthy volunteers and those with a history of cardiovascular illness. In total, 710 individuals were analysed and stratified by age, sex and health. Significant differences in all strain metrics were found between healthy and unhealthy populations, as well as between males and females. Significant differences in basal circumferential strain and global circumferential strain were found between healthy males and females, with males having smaller absolute values for both (all p ≤ 0.001). There were significant differences in the functional variables left ventricular ejection fraction, end-systolic volume, end-systolic volume index and mid-ventricular circumferential strain between healthy and unhealthy male cohorts aged 65-74 (all p ≤ 0.001). These results suggest that whilst regional circumferential strains may be useful clinically for assessing cardiovascular health, care must be taken to ensure critical values are indexed correctly to age and sex, due to the differences in these values observed here.

Electromyography-Assisted Neuromusculoskeletal Models Can Estimate Physiological Muscle Activations and Joint Moments Across the Neck Before Impacts.

Knowledge of neck muscle activation strategies before sporting impacts is crucial for investigating mechanisms of severe spinal injuries. However, measurement of muscle activations during impacts is experimentally challenging and computational estimations are not often guided by experimental measurements. We investigated neck muscle activations before impacts with the use of electromyography (EMG)-assisted neuromusculoskeletal models. Kinematics and EMG recordings from four major neck muscles of a rugby player were experimentally measured during rugby activities. A subject-specific musculoskeletal model was created with muscle parameters informed from MRI measurements. The model was used in the calibrated EMG-informed neuromusculoskeletal modeling toolbox and three neural solutions were compared: (i) static optimization (SO), (ii) EMG-assisted (EMGa), and (iii) MRI-informed EMG-assisted (EMGaMRI). EMGaMRI and EMGa significantly (p < 0.01) outperformed SO when tracking cervical spine net joint moments from inverse dynamics in flexion/extension (RMSE = 0.95, 1.14, and 2.32 N·m) but not in lateral bending (RMSE = 1.07, 2.07, and 0.84 N·m). EMG-assisted solutions generated physiological muscle activation patterns and maintained experimental cocontractions significantly (p < 0.01) outperforming SO, which was characterized by saturation and nonphysiological "on-off" patterns. This study showed for the first time that physiological neck muscle activations and cervical spine net joint moments can be estimated without assumed a priori objective criteria before impacts. Future studies could use this technique to provide detailed initial loading conditions for theoretical simulations of neck injury during impacts.

Managing the risk from children's travel cups.

INTRODUCTION: UK national newspapers have reported cases of children (and adults) who have got their tongue trapped in a Disney travel mug lid, causing extreme distress to the patients, their parents and ED staff. Potential risks include oral endotracheal intubation necessitating emergency tracheostomy to secure the airway, tongue necrosis and dental trauma. Although Disney has withdrawn their original mug from the global market, the same dangers can occur with other internationally available brands. Our aim was to design, test and present an alternative lid. METHODS AND MATERIALS: We designed an alternative lid to fit onto the original Disney mug; our addition of two parallel bars prevented tongue protrusion into the lid. Prototypes of the original and new lids were three-dimensional printed for testing. A tongue substitute was developed and a representative 0.2 bar suction force was generated. The bottle was mounted in a material test machine, attached to the load cell fixture. Four samples each for the existing and new design were tested. The data were analysed by a custom Matlab script to extract the maximum force required to remove the tongues from the cup. RESULTS: The new design resulted in a significant (p=0.0286, Mann-Whitney U) reduction in pullout force. For the existing design, the median pullout force was 4.64 N (minimum 3.86 N, maximum 4.91 N), while it was 2.37 N (minimum 2.20 N, maximum 2.53 N) for the new design. Trauma to the materials used with the original lid design was evident but not observed with our design. CONCLUSION: Our lid appears to offer a safer design that can avoid injuries. However, absolute safety remains unproved, as testing did not account for other body parts which may get trapped in the lid, nor did we test a range of tongue substitute sizes, and laboratory testing only was completed.

High Variability of Acetabular Offset in Primary Hip Osteoarthritis Influences Acetabular Reaming-A Computed Tomography-Based Anatomic Study.

BACKGROUND: The objectives of the present study were to (1) evaluate the accuracy and reliability of native acetabular offset (AO) measurements performed on conventional supine anterior-posterior (ap) pelvis radiographs with reference to computed tomography (CT) in patients with end-stage hip osteoarthritis (OA); (2) determine the minimum and maximum amount of medialization of the center of rotation (COR) simulating different reaming techniques; and (3) identify patients at increased risk of excessive medialization of the COR. METHODS: A consecutive series of corresponding 131 CT scans and radiographs of patients with primary hip OA was evaluated using validated software for three-dimensional acetabular and femoral measurements. We simulated the implantation of a hemispherical press-fit cup comparing anatomic and conventional reaming techniques and assessed corresponding changes in AO. RESULTS: Standardized ap pelvis radiographs allowed for an accurate and reliable assessment of AO compared with CT. Cup placement in the most lateral position (anatomic reaming technique) resulted in a mean implant-related medialization of 5.9 ± 3.4 mm. Anatomic cup placement did not require reaming to the true floor in 64 hips (49%). With the conventional reaming technique, the total medialization of the COR (implant-related and reaming-related) was 6.8 ± 2.9, with 34% of cases having a medialization ≥8 mm. CONCLUSION: The present study highlights the variability of acetabular anatomy in patients with primary OA. AO can be accurately and reliably determined on conventional radiographs and appears to be independent of femoral shape and geometry. Depending on the preferred reaming technique a substantial number of patients appear at risk for excessive cup medialization.

Assessment of Head Displacement and Disassembly Force With Increasing Assembly Load at the Head/Trunnion Junction of a Total Hip Arthroplasty Prosthesis.

BACKGROUND: Most femoral components used now for total hip arthroplasty are modular, requiring a strong connection at assembly. The aim of this study was to assess the effect of assembly force on the strength of head-trunnion interface and to measure the initial displacement of the head on the trunnion with different assembly forces. METHODS: Three assembly load levels were assessed (A: 2 kN, B: 4 kN, C: 6 kN) with 4 implants in each group. The stems were mounted in a custom rig and the respective assembly loads were applied to the head at a constant rate of 0.05 kN/s (ISO7260-10:2003). Load levels were recorded during assembly. Head displacement was measured with a laser sensor. The disassembly force was determined by a standard pull-off test. RESULTS: The maximum head displacement on the trunnion was significantly different between the 2 kN group and the other 2 groups (4 kN, 6 kN, P = .029), but not between the 4 kN and 6 kN groups (P = .89). The disassembly forces between the 3 groups were significantly different (mean ± standard deviation, A: 1316 ± 223 kN; B: 2224 ± 151 kN; C: 3965 ± 344 kN; P = .007), with increasing assembly load leading to a higher pull-off force. For the 4 kN and 6 kN groups, a first peak of approximately 2.5 kN was observed on the load recordings during assembly before the required assembly load was eventually reached corresponding to sudden increase in head displacement to approximately 150 µm. CONCLUSION: An assembly force of 2 kN may be too low to overcome the frictional forces needed to engage the head and achieve maximum displacement on the trunnion and thus an assembly load of greater than 2.5 kN is recommended.

A Validated Open-Source Multisolver Fourth-Generation Composite Femur Model.

Synthetic biomechanical test specimens are frequently used for preclinical evaluation of implant performance, often in combination with numerical modeling, such as finite-element (FE) analysis. Commercial and freely available FE packages are widely used with three FE packages in particular gaining popularity: abaqus (Dassault Systèmes, Johnston, RI), ansys (ANSYS, Inc., Canonsburg, PA), and febio (University of Utah, Salt Lake City, UT). To the best of our knowledge, no study has yet made a comparison of these three commonly used solvers. Additionally, despite the femur being the most extensively studied bone in the body, no freely available validated model exists. The primary aim of the study was primarily to conduct a comparison of mesh convergence and strain prediction between the three solvers (abaqus, ansys, and febio) and to provide validated open-source models of a fourth-generation composite femur for use with all the three FE packages. Second, we evaluated the geometric variability around the femoral neck region of the composite femurs. Experimental testing was conducted using fourth-generation Sawbones® composite femurs instrumented with strain gauges at four locations. A generic FE model and four specimen-specific FE models were created from CT scans. The study found that the three solvers produced excellent agreement, with strain predictions being within an average of 3.0% for all the solvers (r2 > 0.99) and 1.4% for the two commercial codes. The average of the root mean squared error against the experimental results was 134.5% (r2 = 0.29) for the generic model and 13.8% (r2 = 0.96) for the specimen-specific models. It was found that composite femurs had variations in cortical thickness around the neck of the femur of up to 48.4%. For the first time, an experimentally validated, finite-element model of the femur is presented for use in three solvers. This model is freely available online along with all the supporting validation data.

What Is the Early/Mid-term Survivorship and Functional Outcome After Bernese Periacetabular Osteotomy in a Pediatric Surgeon Practice?

BACKGROUND: The Bernese periacetabular osteotomy (PAO) is a recognized joint-preserving procedure. Achieving joint stability without creating impingement is important, but the orientation target that best balances these sometimes competing goals has not yet been clearly defined. Moreover, the learning curve of this challenging procedure has not been described. QUESTIONS/PURPOSES: The purposes of this study were (1) to determine the 10-year survivorship and functional outcome after Bernese PAO in a single-surgeon series; (2) to review which patient, surgical, and radiographic factors might predict outcome after the procedure; and (3) to define the learning curve for target acetabular correction. METHODS: The first 68 PAOs performed for symptomatic hip dysplasia were retrospectively evaluated. None have been lost to followup with followup less than 2 years. Endpoints for the lost to followup (n = 2) are at the time of when last seen. During the study period, the same surgeon performed 562 pelvic osteotomies (including Salter, Pemberton, Dega and Chiari) and 64 shelf acetabuloplasties. Bernese PAO was used only for symptomatic dysplasia (center-edge angle < 25° and nonhorizontal acetabular roof) in developmentally mature hips without evidence of major joint incongruence or subluxation. Most patients were female (n = 49 [60 hips, 88%]); mean age at operation was 25 years (SD 7). Sixteen hips had previous hip procedures. The study's mean followup was 8 years (range, 2-18 years). Patient-reported functional outcome was obtained using the WOMAC score (best-worst: 0-96). Radiographic parameters of dysplasia (acetabular index [AI], center-edge angle [CEA], congruency, Tönnis grade, and joint space) were evaluated from preoperative and postoperative radiographs using computer software. RESULTS: The 10-year survival rate was 93% (95% confidence interval [CI], 82%-100%); four patients underwent further surgery to the hip in the study period. The mean WOMAC was 12 (range, 0-54). Factors that influenced survival included joint congruency (100% versus 78%; 95% CI, 61%-96%; p = 0.03) and acetabular orientation correction achieved (AIpostoperative < 15° [100% versus 65%; 95% CI, 43-88; p < 0.001] and CEApostoperative 20° to 40° [100% versus 71.9%; 52.8-100; p < 0.001]). Better WOMAC scores were seen if postoperative AI < 15° (7 versus 25, p = 0.005) and CEA between 20° and 40° (7 versus 23, p = 0.005) were achieved. The chances of obtaining acetabular correction within this range improved after the 20(th) procedure (30% versus 70%, p = 0.008). CONCLUSIONS: This study reports excellent results after Bernese PAO in the hands of an experienced pediatric hip surgeon. We advocate cautious correction of the acetabular fragment. Future studies should concentrate on how to determine what the optimal target is and how to achieve it intraoperatively, minimizing the learning curve associated with it. LEVEL OF EVIDENCE: Level III, therapeutic study.

An Extended Neck Position is Likely to Produce Cervical Spine Injuries Through Buckling in Accidental Head-First Impacts During Rugby Tackling.

Catastrophic cervical spine injuries in rugby often occur during tackling. The underlying mechanisms leading to these injuries remain unclear, with neck hyperflexion and buckling both proposed as the causative factor in the injury prevention literature. The aim of this study was to evaluate the effect of pre-impact head-neck posture on intervertebral neck loads and motions during a head-first rugby tackle. Using a validated, subject-specific musculoskeletal model of a rugby player, and computer simulations driven by in vivo and in vitro data, we examined the dynamic response of the cervical spine under such impact conditions. The simulations demonstrated that the initial head-neck sagittal-plane posture affected intervertebral loads and kinematics, with an extended neck resulting in buckling and supraphysiologic intervertebral shear and flexion loads and motions, typical of bilateral facet dislocation injuries. In contrast, an initially flexed neck increased axial compression forces and flexion angles without exceeding intervertebral physiological limits. These findings provide objective evidence that can inform injury prevention strategies or rugby law changes to improve the safety of the game of rugby.

The Relationship of Cup Inclination and Anteversion in the Coronal Plane with Ante-Inclination in the Sagittal Plane: Exposing the Fallacy of Cup Safe Zones.

Background: This study aimed to establish an equation for calculating cup ante-inclination (AI) from radiographic cup inclination and anteversion, to validate this equation in a total hip arthroplasty (THA) cohort, and to test whether achieving previously described radiographic cup inclination and anteversion targets would also satisfy sagittal cup AI targets. Methods: A mathematical equation linking cup AI, radiographic inclination (RI), and anteversion (RA) was determined: tan(AI) = tan(RA)/cos(RI). Supine and standing anteroposterior and lateral radiographs of 440 consecutive THAs were assessed to measure cup RI and RA and spinopelvic parameters, including cup AI, using a validated software tool. Whether orientation within previously defined RI and RA targets was associated with achieving the AI target and satisfying the sagittal component orientation (combined sagittal index, 205° to 245°) was tested. Results: The cups in the THA cohort had a measured mean inclination (and standard deviation) of 43° ± 7°, anteversion of 26° ± 9°, and AI of 34° ± 10°. The calculated cup AI was 34° ± 12°. A strong correlation existed between measured and calculated AI (r = 0.75; p < 0.001), with a mean error of 0° ± 8°. The inclination and anteversion targets were both satisfied in 194 (44.1%) to 330 (75.0%) of the cases, depending on the safe zone targets that were used, and 311 cases (70.7%) satisfied the AI target. Only 125 (28.4%) to 233 (53.0%) of the cases satisfied the AI target as well as the inclination and anteversion targets. Satisfying inclination and anteversion targets was not associated with increased chances of satisfying the AI target. Conclusions: Achieving optimal cup inclination and anteversion does not ensure optimal orientation in the sagittal plane. The equation and nomograms provided can be used to determine and visualize how the 2 planes used for evaluating the cup orientation and the pertinent angles relate, potentially aiding in preoperative planning.

The 2012 Otto Aufranc Award: The interpretation of metal ion levels in unilateral and bilateral hip resurfacing.

BACKGROUND: The interpretation of metal ion concentrations and their role in clinical management of patients with metal-on-metal implants is still controversial. QUESTIONS/PURPOSES: We questioned whether patients undergoing hip resurfacing with no clinical problems could be differentiated from those with clinical (pain, loss of function) and/or radiographic (component malpositioning, migration, bone loss), problems based on metal ion levels, and if there was a threshold metal level that predicted the need for clinical intervention. Furthermore, we asked if patient and implant factors differed between these functional groups. METHODS: We retrospectively identified 453 unilateral and 139 bilateral patients with ion measurements at minimum followup of 12 months (mean, 4.3 years; range, 1-12.9 years). Patients were designated as well functioning or poorly functioning based on strict criteria. The acceptable upper levels within the well-functioning group were determined from the 75th percentile plus 1.5× interquartile range. The sensitivity and specificity of these levels to predict clinical problems were calculated. RESULTS: Well-functioning group ions were lower than the poorly functioning group ion levels. The acceptable upper levels were: chromium (Cr) 4.6 µg/L, cobalt (Co) 4.0 µg/L unilateral and Cr 7.4 µg/L, Co 5.0 µg/L bilateral. The specificity of these levels in predicting poor function was high (95%) and sensitivity was low (25%). There were more males in the well-functioning group and more females and smaller femoral components in the poorly functioning group. CONCLUSIONS: Metal levels higher than these proposed safe upper limits can predict problems with metal-on-metal resurfacings and are important parameters in the management of at-risk patients. LEVEL OF EVIDENCE: Level II, diagnostic study. See Guidelines for Authors for a complete description of levels of evidence.

A simple formula to control posterior tibial slope during proximal tibial osteotomies.

BACKGROUND: High tibial osteotomy surgery is a widely successful joint-preserving procedure which alters the hip-knee-ankle axis which can delay the progression of osteoarthritis; however, conventional osteotomy surgical procedures do not adequately control the posterior tibial slope. This study aimed to determine the key variables influencing posterior tibial slope during high tibial osteotomy and provide a simple means of implementing the findings during pre-operative planning. METHODS: A virtual cohort of twenty-eight proximal tibia geometries of knee osteoarthritis patients was used in the study. Firstly, absolute posterior tibial slope values were contrasted using anatomical and posterior mechanical axis measurement approaches. Secondly, the influence of variables affecting posterior tibial slope change during osteotomy surgery was investigated using 3D preoperative planning surgical simulation and analytical modelling. FINDINGS: There was a poor correlation (R2 = 0.38) between the different clinical measurements of posterior tibial slope; with an average of 7.0 ± 1.3° and 14.8 ± 2.2° respectively. An analytical solution for the change in posterior tibial slope was derived based on the hinge axis angle and the osteotomy opening angle. For three different opening angles (6°, 9° and 12°) and seven different hinge axis orientations (-30° to +30°), the results obtained were identical for the analytical model and the 3D preoperative planning. INTERPRETATION: This study determined that the key variables affecting posterior tibial slope during high tibial osteotomy are the osteotomy opening angle and the hinge axis orientation. The derived formula provides a simple means of determining the change in posterior tibial slope resulting from a particular surgical approach.

A MRI classification of periprosthetic soft tissue masses (pseudotumours) associated with metal-on-metal resurfacing hip arthroplasty.

OBJECTIVE: Metal-on-metal hip resurfacing arthroplasty (MoMHRA) has become a popular option for young patients requiring hip replacement. A recognised complication is the formation of a symptomatic reactive periprosthetic soft tissue mass (pseudotumour). We present a radiological classification system for these reactive masses, dividing them into three groups: Type I are thin-walled cystic masses (cyst wall <3 mm), Type II are thick-walled cystic masses (cyst wall >3 mm, but less than the diameter of the cystic component) and Type III are predominantly solid masses. MATERIALS AND METHODS: We reviewed all MRI performed over a 4-year period in patients with primary MoMHRA referred to our institution. In all cases the masses were assessed on MRI according to size, anatomical position, signal intensity and involvement of bone, muscle or neighbouring neurovascular bundles. RESULTS: Periprosthetic masses were seen in 33 hips in 17 female (7 bilateral) and 8 male patients (1 bilateral). The Type I lesions were the most common and more likely to be posterior to the hip joint. The Type III masses were significantly larger than the cystic lesions and were more likely to be located anterior to the hip joint. To date 22 patients have undergone revision surgery with conversions to total hip replacement. Severity of symptoms and revision rates were lowest in the Type I group and highest in the Type III group. CONCLUSION: Solid anterior pseudotumours were most likely to have the more severe symptoms and require revision surgery.

Using suction in back-bleeding conditions increases cement penetration without the need for a tourniquet.

BACKGROUND: The majority of total knee arthroplasties are performed with a tourniquet as it is perceived this gives rise to superior cement fixation. Tourniquets, however, have been associated with increased pain, post-operative swelling, and reduced knee range of movement which can all detrimentally impact patient recovery. This laboratory-based study aimed to assess if it is possible to achieve equivalent (or even enhanced) cementation without a tourniquet using a novel suction device. METHODS: Cement penetration was compared between conditions simulating bone with back-bleeding with and without the use of suction in open-cell rigid foam tibia models and porcine specimens. Suction was applied via a urinary catheter inserted into the tibial recess created for the implant's stem. Cement penetration depth was measured from micro-CT scans. The pull-off strength of cemented tibial implant analogues in porcine specimens with and without suction was also assessed. RESULTS: Suction gave rise to a significant (p = 0.028) increase in cement penetration depth in both the rigid foam, 5.4 - 6.6 mm, and porcine specimens, 0.7 - 1.0 mm. A non-significant increase in implant pull-off strength was also observed. CONCLUSION: Suction during cementation in a back-bleeding model resulted in significantly greater cement penetration depth. Using suction surgeons can avoid potential disadvantages of tourniquet use without compromising cementation.

Integrating the Combined Sagittal Index Reduces the Risk of Dislocation Following Total Hip Replacement.

BACKGROUND: The aims of this matched cohort study were to (1) assess differences in spinopelvic characteristics between patients who sustained a dislocation after total hip arthroplasty (THA) and a control group without a dislocation, (2) identify spinopelvic characteristics associated with the risk of dislocation, and (3) propose an algorithm including individual spinopelvic characteristics to define an optimized cup orientation target to minimize dislocation risk. METHODS: Fifty patients with a history of THA dislocation (29 posterior and 21 anterior dislocations) were matched for age, sex, body mass index (BMI), index diagnosis, surgical approach, and femoral head size with 200 controls. All patients underwent detailed quasi-static radiographic evaluations of the coronal (offset, center of rotation, and cup inclination/anteversion) and sagittal (pelvic tilt [PT], sacral slope [SS], pelvic incidence [PI], lumbar lordosis [LL], pelvic-femoral angle [PFA], and cup anteinclination [AI]) reconstructions. The spinopelvic balance (PI - LL), combined sagittal index (CSI = PFA + cup AI), and Hip-User Index were determined. Parameters were compared between the control and dislocation groups (2-group analysis) and between the controls and 2 dislocation groups identified according to the direction of the dislocation (3-group analysis). Important thresholds were determined from receiver operating characteristic (ROC) curve analyses and the mean values of the control group; thresholds were expanded incrementally in conjunction with running-hypothesis tests. RESULTS: There were no coronal differences, other than cup anteversion, between groups. However, most sagittal parameters (LL, PT, CSI, PI - LL, and Hip-User Index) differed significantly. The 3 strongest predictors of instability were PI - LL >10° (sensitivity of 70% and specificity of 65% for instability regardless of direction), CSIstanding of <216° (posterior instability), and CSIstanding of >244° (anterior instability). A CSI that was not between 205° and 245° on the standing radiograph (CSIstanding) was associated with a significantly increased dislocation risk (odds ratio [OR]: 4.2; 95% confidence interval [CI]: 2.2 to 8.2; p < 0.001). In patients with an unbalanced and/or rigid lumbar spine, a CSIstanding that was not 215° to 235° was associated with a significantly increased dislocation risk (OR: 5.1; 95% CI: 1.8 to 14.9; p = 0.001). CONCLUSIONS: Spinopelvic imbalance (PI - LL >10°) determined from a preoperative standing lateral spinopelvic radiograph can be a useful screening tool, alerting surgeons that a patient is at increased dislocation risk. Measurement of the PFA preoperatively provides valuable information to determine the optimum cup orientation to aim for a CSIstanding of 205° to 245°, which is associated with a reduced dislocation risk. For patients at increased dislocation risk due to spinopelvic imbalance (PI - LL >10°), the range for the optimum CSI is narrower. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Augmented screwdrivers can increase the performance of orthopaedic surgeons compared with use of normal screwdrivers.

Orthopaedic screws insertion can be trivialised as a simple procedure, however it is frequently performed poorly. Limited work exists defining how well surgeons insert screws or whether augmented screwdrivers can aid surgeons to reduce stripping rates and optimise tightness. We aimed to establish the performance of surgeons inserting screws and whether this be improved with screwdriver augmentation. 302 orthopaedic surgeons tightened 10 non-locking screws to what they determined to be optimum tightness into artificial bone sheets. The confidence in the screw purchase was given (1-10). A further 10 screws were tightened, using an augmented screwdriver that indicated when a predetermined optimum tightness was reached. The tightness for unstripped insertions under normal conditions and with the augmented screwdriver were 81% (95% CI 79-82%)(n = 1275) and 70% (95% CI 69-72%)(n = 2577) (p < 0.001). The stripping rates were 58% (95% CI 54-61%) and 15% (95% CI 12-17%) respectively (p < 0.001). The confidences when using the normal and augmented screwdrivers respectively were 7.2 and 7.1 in unstripped insertions and 6.2 and 6.5 in stripped insertions. Performance improved with an augmented screwdriver, both in reduced stripping rates and greater accuracy in detecting stripping. Augmenting screwdrivers to indicate optimum tightness offer potentially enormous clinical benefits by improving screw fixation.

"Asymptomatic" pseudotumors after metal-on-metal hip resurfacing arthroplasty: prevalence and metal ion study.

Symptomatic abnormal periprosthetic soft-tissue reactions ("pseudotumors") have been reported after metal-on-metal hip resurfacing arthroplasty (MoMHRA). The aims of this study were (1) to determine the prevalence of asymptomatic pseudotumors after MoMHRA and (2) to measure metal ion levels in these patients. A total of 201 hips in 158 patients were evaluated at a mean follow-up of 61 months (range, 36-88) using ultrasound/magnetic resonance imaging and serum/hip aspirate cobalt and chromium measurements. Pseudotumors found in 7 patients (4%) were associated with significantly higher cobalt and chromium levels and inferior functional scores. Elevated levels of cobalt and chromium ions suggest that pseudotumors are associated with increased wear generated from metal-on-metal articulations. Clinicians need to be aware of pseudotumors as a differential diagnosis during clinical evaluation of MoMHRA patients, and further imaging such as ultrasound or magnetic resonance imaging is recommended to confirm the diagnosis.

Properties of PMMA end cap holders affect FE stiffness predictions of vertebral specimens.

Bone cement is often used, in experimental biomechanics, as a potting agent for vertebral bodies (VB). As a consequence, it is usually included in finite element (FE) models to improve accuracy in boundary condition settings. However, bone cement material properties are typically assigned to these models based on literature data obtained from specimens created under conditions which often differ from those employed for cement end caps. These discrepancies can result in solids with different material properties from those reported. Therefore, this study aimed to analyse the effect of assigning different mechanical properties to bone cement in FE vertebral models. A porcine C2 vertebral body was potted in bone cement end caps, µCT scanned, and tested in compression. DIC was performed on the anterior surface of the specimen to monitor the displacement. Specimen stiffness was calculated from the load-displacement output of the materials testing machine and from the machine load output and average displacement measured by DIC. Fifteen bone cement cylinders with dimensions similar to the cement end caps were produced and subjected to the same compression protocol as the vertebral specimen and average stiffness and Young moduli were estimated. Two geometrically identical vertebral body FE models were created from the µCT images, the only difference residing in the values assigned to bone cement material properties: in one model these were obtained from the literature and in the other from the cylindrical cement samples previously tested. The average Youngs modulus of the bone cement cylindrical specimens was 1177 ± 3 MPa, considerably lower than the values reported in the literature. With this value, the FE model predicted a vertebral specimen stiffness 3% lower than that measured experimentally, while when using the value most commonly reported in similar studies, specimen stiffness was overestimated by 150%.

Chemical stability of oil-infused polyethylene.

Ultra-high molecular weight polyethylene (UHMWPE) can be made radiopaque for medical imaging applications through the diffusion of an iodised oil-based contrast agent (Lipiodol Ultra Fluid). A similar process is used for Vitamin E incorporated polyethylene which provides antioxidant properties. This study aimed to investigate the critical long-term properties of oil-infused medical polyethylene after 4 weeks of accelerated thermal ageing. Samples treated with an oil (Vitamin E or Lipiodol) had a higher oxidation stability than currently used medical grade polyethylene, indicated by a smaller increase in oxidation index after ageing (Vitamin E + 36%, Lipiodol +40%, Untreated +136%, Thermally treated +164%). The tensile properties of oil treated polyethylene after ageing were significantly higher than the Untreated and Thermally treated controls (p<0.05) indicating less mechanical degradation. There was also no alteration in the percentage crystallinity of oil treated samples after ageing, though the radiopacity of the Lipiodol treated samples reduced by 54% after ageing. The leaching of oil with time was also investigated; the leaching of Lipiodol and Vitamin E followed the same trend and reached a steady state by two weeks. Overall, it can be concluded that the diffusion of an oil-based fluid into polyethylene not only increases the oxidative and chemical stability of polyethylene but also adds additional functionality (e.g. radiopacity) providing a more suitable material for long-term medical applications.