On the Binding Mechanisms of Calcium Ions to Polycarboxylates: Effects of Molecular Weight, Side Chain, and Backbone Chemistry.

We experimentally determined the characteristics and Langmuir parameters of the binding of calcium ions to different polycarboxylates. By using potentiometric titrations and isothermal titration calorimetry, the effects of side chain chemistry, pH value, and chain length were systematically investigated using the linear polymers poly(aspartic acid), poly(glutamic acid), and poly(acrylic acid). We demonstrate that for polymers with high polymerization degrees, the binding process is governed by higher-order effects, such as the change of apparent pKa of carboxyl groups, and contributions arising from the whole polymer chain while the chemistry of the monomer unit constituting the polymer plays a subordinate role. In addition, primary binding sites need to be present in the polymer, thus rendering the abundance and sequential arrangement of protonated and deprotonated groups important. The detection of higher-order effects contradicts the assumptions posed by the Langmuir model of noninteracting binding sites and puts a question mark on whether ion binding to polycarboxylates can be described using solely a Langmuir binding model. No single uniform mechanism fits all investigated systems, and the whole polymer chain, including terminal groups, needs to be considered for the interpretation of binding data. Therefore, one needs to be careful when explaining ion binding to polymers solely based on studies on monomers or oligomers.

Probing the effects of polymers on the early stages of calcium carbonate formation by stoichiometric co-titration.

Potentiometric titrations are a powerful tool to study the early stages of the precipitation of minerals such as calcium carbonate and were used among others for the discovery and characterisation of key precursors like prenucleation clusters. Here we present a modified procedure for conducting such titration experiments, in which the reactants (i.e. calcium and (bi)carbonate ions) are added simultaneously in stoichiometric amounts, while both the amount of free calcium and the optical transmission of the solution are monitored online. Complementarily, the species occurring at distinct stages of the crystallisation process were studied using cryogenic transmission electron microscopy. This novel routine was applied to investigate CaCO3 nucleation in the absence and presence of polymeric additives with different chemical functionalities. The obtained results provide new insights into the critical steps underlying nucleation and subsequent ripening, such as the role of liquid mineral-rich phases and their transformation into solid particles. The studied polymers proved to interfere at multiple stages along the complex mineralisation pathway of calcium carbonate, with both the degree and mode of interaction depending on the chosen polymer chemistry. In this way, the methodology developed in this work allows the mechanisms of antiscalants - or crystallisation modifiers in general - to be elucidated at an advanced level of detail.

Colloidal pathways of amorphous calcium carbonate formation lead to distinct water environments and conductivity.

CaCO3 is the most abundant biomineral and a major constituent of incrustations arising from water hardness. Polycarboxylates play key roles in controlling mineralization. Herein, we present an analytical and spectroscopic study of polycarboxylate-stabilized amorphous CaCO3 (ACC) and its formation via a dense liquid precursor phase (DLP). Polycarboxylates facilitate pronounced, kinetic bicarbonate entrapment in the DLP. Since bicarbonate is destabilized in the solid state, DLP dehydration towards solid ACC necessitates the formation of locally calcium deficient sites, thereby inhibiting nucleation. Magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy of poly-aspartate-stabilized ACC reveals the presence of two distinct environments. The first contains immobile calcium and carbonate ions and structural water molecules, undergoing restricted, anisotropic motion. In the second environment, water molecules undergo slow, but isotropic motion. Indeed, conductive atomic force microscopy (C-AFM) reveals that ACC conducts electrical current, strongly suggesting that the mobile environment pervades the bulk of ACC, with dissolved hydroxide ions constituting the charge carriers. We propose that the distinct environments arise from colloidally stabilized interfaces of DLP nanodroplets, consistent with the pre-nucleation cluster (PNC) pathway.

Bottling Liquid-Like Minerals for Advanced Materials Synthesis.

Materials synthesis via liquid-like mineral precursors has been studied since their discovery almost 25 years ago, because their properties offer several advantages, for example, the ability to infiltrate small pores, the production of non-equilibrium crystal morphologies or mimicking textures from biominerals, resulting in a vast range of possible applications. However, the potential of liquid-like precursors has never been fully tapped, and they have received limited attention in the materials chemistry community, largely due to the lack of efficient and scalable synthesis protocols. Herein, the "scalable controlled synthesis and utilization of liquid-like precursors for technological applications" (SCULPT) method is presented, allowing the isolation of the precursor phase on a gram scale, and its advantage in the synthesis of crystalline calcium carbonate materials and respective applications is demonstrated. The effects of different organic and inorganic additives, such as magnesium ions and concrete superplasticizers, on the stability of the precursor are investigated and allow optimizing the process for specific demands. The presented method is easily scalable and therefore allows synthesizing and utilizing the precursor on large scales. Thus, it can be employed for mineral formation during restoration and conservation applications but can also open up pathways toward calcium carbonate-based, CO2 -neutral cements.

Revision of the calibration experiment in asymmetrical flow field-flow fractionation.

Asymmetrical flow field-flow fractionation is a versatile chromatographic fractionation method. In combination with at least one detection technique it is used for size-based separation of colloids, biomolecules and polymers. Although often used as pure separation method, a well-elaborated theory is available that allows precise quantification of the translational diffusion coefficient D. Still, current literature suggests different ways to transform this theory into applicable experimental procedures and no "gold standard" for correct data processing exists. While some sources report a direct way to extract diffusion information from the fractogram, others suggest the necessity of an external calibration measurement to obtain the channel width w. In this work, we compare the different approaches and calibration algorithms based on original and literature data using our own open-source AF4 evaluation software. Based on the results, we conclude that available AF4 setups do not fulfill the requirements for absolute measurements of D. We show that the best way to conduct is to consider the area of the channel and D of the calibrant while neglecting the small peak which occurs in the void peak region.