RESUMO
In this study, we report on the synthesis of silver nanoparticles (AgNPs) achieved by using three bacterial strains Rhodococcus, Brevundimonas and Bacillus as reducing and capping agents, newly isolated from a consortium associated with the Antarctic marine ciliate Euplotes focardii. After incubation of these bacteria with a 1 mM solution of AgNO3 at 22 °C, AgNPs were synthesized within 24 h. Unlike Rhodococcus and Bacillus, the reduction of Ag+ from AgNO3 into Ag0 has never been reported for a Brevundimonas strain. The maximum absorbances of these AgNPs in the UV-Vis spectra were in the range of 404 nm and 406 nm. EDAX spectra showed strong signals from the Ag atom and medium signals from C, N and O due to capping protein emissions. TEM analysis showed that the NPs were spherical and rod-shaped, with sizes in the range of 20 to 50 nm, and they were clustered, even though not in contact with one another. Besides aggregation, all the AgNPs showed significant antimicrobial activity. This biosynthesis may play a dual role: detoxification of AgNO3 and pathogen protection against both the bacterium and ciliate. Biosynthetic AgNPs also represent a promising alternative to conventional antibiotics against common nosocomial pathogens.
Assuntos
Anti-Infecciosos , Nanopartículas Metálicas , Regiões Antárticas , Antibacterianos/metabolismo , Bactérias/metabolismo , Testes de Sensibilidade Microbiana , Extratos Vegetais , Prata/farmacologiaRESUMO
The synthesis of silver nanoparticles (AgNPs) by microorganisms recently gained a greater interest due to its potential to produce them in various sizes and morphologies. In this study, for AgNP biosynthesis, we used a new Pseudomonas strain isolated from a consortium associated with the Antarctic marine ciliate Euplotes focardii. After incubation of Pseudomonas cultures with 1 mM of AgNO3 at 22 °C, we obtained AgNPs within 24 h. Scanning electron (SEM) and transmission electron microscopy (TEM) revealed spherical polydispersed AgNPs in the size range of 20-70 nm. The average size was approximately 50 nm. Energy dispersive X-ray spectroscopy (EDS) showed the presence of a high intensity absorption peak at 3 keV, a distinctive property of nanocrystalline silver products. Fourier transform infrared (FTIR) spectroscopy found the presence of a high amount of AgNP-stabilizing proteins and other secondary metabolites. X-ray diffraction (XRD) revealed a face-centred cubic (fcc) diffraction spectrum with a crystalline nature. A comparative study between the chemically synthesized and Pseudomonas AgNPs revealed a higher antibacterial activity of the latter against common nosocomial pathogen microorganisms, including Escherichia coli, Staphylococcus aureus and Candida albicans. This study reports an efficient, rapid synthesis of stable AgNPs by a new Pseudomonas strain with high antimicrobial activity.
Assuntos
Antibacterianos/biossíntese , Euplotes/microbiologia , Nanopartículas Metálicas/química , Pseudomonas/metabolismo , Prata/química , Regiões Antárticas , Antibacterianos/farmacologia , Candida albicans/efeitos dos fármacos , Escherichia coli/efeitos dos fármacos , Química Verde/métodos , Nanopartículas Metálicas/administração & dosagem , Microscopia Eletrônica de Transmissão/métodos , Tamanho da Partícula , Prata/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Staphylococcus aureus/efeitos dos fármacosRESUMO
A systematic study is presented on a set of vanadium-bearing model compounds, representative of the most common V coordination geometries and oxidation states, analysed by means of vanadium K-edge X-ray absorption near-edge spectroscopy calculations in the full multiple scattering (FMS) framework. Analysis and calibration of the free parameters of the theory under the muffin-tin approximation (muffin-tin overlap and interstitial potential) have been carried out by fitting the experimental spectra using the MXAN program. The analysis shows a correlation of the fit parameters with the V coordination geometry and oxidation state. By making use of this correlation it is possible to approach the study of unknown V-bearing compounds with useful preliminary information.
RESUMO
Here we report an in-depth structural characterization of transition metal-doped zinc oxide nanoparticles that have recently been used as anode materials for Li-ion batteries. Structural refinement of powder X-ray diffraction (XRD) data allowed the determination of small though reproducible changes in the unit cell dimensions of four ZnO samples (wurtzite structure) prepared with different dopants or different synthesis conditions. Moreover, large variations of the full width at half-maximum of the XRD reflections indicate that the crystallinity of the samples decreases in the order ZnO, Zn0.9Co0.1O, Zn0.9Fe0.1O/C, and Zn0.9Fe0.1O (the crystallite sizes as determined by Williamson-Hall plots are 42, 29, 15, and 13 nm, respectively). X-ray absorption spectroscopy data indicate that Co is divalent, whereas Fe is purely trivalent in Zn0.9Fe0.1O and 95% trivalent (Fe(3+)/(Fe(3+) + Fe(2+)) ratio = 0.95) in Zn0.9Fe0.1O/C. The aliovalent substitution of Fe(3+) for Zn(2+) implies the formation of local defects around Fe(3+) such as cationic vacancies or interstitial oxygen for charge balance. The EXAFS (extended X-ray absorption fine structure) data, besides providing local Fe-O and Co-O bond distances, are consistent with a large amount of charge-compensating defects. The Co-doped sample displays similar EXAFS features to those of pure ZnO, suggesting the absence of a large concentration of defects as found in the Fe-doped samples. These results are of substantial importance for understanding and elucidating the modified electrochemical lithiation mechanism by introducing transition metal dopants into the ZnO structure for the application as lithium-ion anode material.
RESUMO
A former spectroscopic study of Cu(II) coordination by the 13-membered ring cyclic tetrapeptide c(Lys-dHis-ßAla-His) (DK13), revealed the presence, at alkaline pH, of a stable peptide/Cu(III) complex formed in solution by atmospheric dioxygen oxidation. To understand the nature of this coordination compound and to investigate the role of the His residues in the Cu(III) species formation, Cu K-edge XANES, and EXAFS spectra have been collected for DK13 and two other 13-membered cyclo-peptides: the diastereoisomer c(Lys-His-ßAla-His) (LK13), and c(Gly-ßAla-Gly-Lys) (GK13), devoid of His residues. Comparison of pre-edge peak features with those of Cu model compounds, allowed us to get information on copper oxidation state in two of the three peptides, DK13 and GK13: DK13 contains only Cu(III) ions in the experimental conditions, while GK13 binds only with Cu(II). For LK13/Cu complex, EXAFS spectrum suggested and UV-vis analysis confirmed the presence of a mixture of Cu(II) and Cu(III) coordinated species. Theoretical XANES spectra have been calculated by means of the MXAN code. The good agreement between theoretical and experimental XANES data collected for DK13, suggests that the refined structure, at least in the first coordination shell around Cu, is a good approximation of the DK13/Cu(III) coordination species present at strongly alkaline pH. All the data are consistent with a slightly distorted pyramidal CuN(4) unit, coming from the peptide bonds. Surprisingly, the His side-chains seemed not involved in the final, stable, Cu(III) scaffold.
Assuntos
Cobre/química , Oligopeptídeos/química , Oxigênio/química , Peptídeos Cíclicos/química , Complexos de Coordenação , Histidina/química , Concentração de Íons de Hidrogênio , Modelos Moleculares , Oxirredução , Soluções , Estereoisomerismo , Espectroscopia por Absorção de Raios XRESUMO
We report experimental evidence for a spontaneous shape transition, from regular islands to elongated nanowires, upon high-temperature annealing of a thin Mn wetting layer evaporated on Ge(111). We demonstrate that 4.5 monolayers is the critical thickness of the Mn layer, governing the shape transition to wires. A small change around this value modulates the geometry of the nanostructures. The Mn-Ge alloy nanowires are single-crystalline structures with homogeneous composition and uniform width along their length. The shape evolution towards nanowires occurs for islands with a mean size of ≃170 nm. The wires, up to ≃1.1 µm long, asymptotically tend to ≃80 nm of width. We found that tuning the annealing process allows one to extend the wire length up to ≃1.5 µm with a minor rise of the lateral size to ≃100 nm. The elongation process of the nanostructures is in agreement with a strain-driven shape transition mechanism proposed in the literature for other heteroepitaxial systems. Our study gives experimental evidence for the spontaneous formation of spatially uniform and compositionally homogeneous Mn-rich GeMn nanowires on Ge(111). The reliable and simple synthesis approach allows one to exploit the room-temperature ferromagnetic properties of the Mn-Ge alloy to design and fabricate novel nanodevices.
RESUMO
Volcanic ashes particles are subjected to substantial modification during explosive eruptions. The mineralogical and compositional changes have important consequences on the environment and human health. Nevertheless, the relationship between the speciation of iron (Fe) and the mineralogical composition and particle granulometry of the ashes, along with their interaction with water, are largely unknown. In particular, the Fe oxidation state and the possible formation of new Fe-bearing phases in presence of S, Cl, and F in the plume are key points to assess the impact of the ashes. Fragmental material ejected during volcanic activity (tephra) in 2013, was collected on the Mt. Etna (Italy) and investigated using a multi-technique approach that included conventional Electron Paramagnetic Resonance (EPR), high field EPR (HFEPR), EchoEPR, and Fe K-edge X-ray Absorption Spectroscopy (XAS). These element-selective techniques allowed obtaining a detailed information on the oxidation state and coordination environment of Fe, and of its speciation in the ash samples as a function of the granulometry. A complex mineralogical assemblage, consisting of variable amounts of nanometric crystalline Fe inclusions in a glass matrix, and of Fe-oxides and Fe-sulfur phases was revealed. A risk assessment of the ashes is attempted.
RESUMO
We isolated a novel bacterial strain from a prokaryotic consortium associated to the psychrophilic marine ciliate Euplotes focardii, endemic of the Antarctic coastal seawater. The 16S rDNA sequencing and the phylogenetic analysis revealed the close evolutionary relationship to the Antarctic marine bacterium Marinomonas sp. BSw10506 and the sub antarctic Marinomonas polaris. We named this new strain Marinomonas sp. ef1. The optimal growth temperature in LB medium was 22 °C. Whole genome sequencing and analysis showed a reduced gene loss limited to regions encoding for transposases. Additionally, five genomic islands, e.g. DNA fragments that facilitate horizontal gene transfer phenomena, were identified. Two open reading frames predicted from the genomic islands coded for enzymes belonging to the Nitro-FMN-reductase superfamily. One of these, the putative NAD(P)H nitroreductase YfkO, has been reported to be involved in the bioreduction of silver (Ag) ions and the production of silver nanoparticles (AgNPs). After the Marinomonas sp. ef1 biomass incubation with 1 mM of AgNO3 at 22 °C, we obtained AgNPs within 24 h. The AgNPs were relatively small in size (50 nm) and had a strong antimicrobial activity against twelve common nosocomial pathogenic microorganisms including Staphylococcus aureus and two Candida strains. To our knowledge, this is the first report of AgNPs biosynthesis by a Marinomonas strain. This biosynthesis may play a dual role in detoxification from silver nitrate and protection from pathogens for the bacterium and potentially for the associated ciliate. Biosynthetic AgNPs also represent a promising alternative to conventional antibiotics against common pathogens.
Assuntos
Antibacterianos/administração & dosagem , Fibroblastos/efeitos dos fármacos , Transferência Genética Horizontal , Genes Bacterianos/genética , Marinomonas/isolamento & purificação , Nanopartículas Metálicas/administração & dosagem , Prata/química , Antibacterianos/química , Antibacterianos/metabolismo , DNA Bacteriano/genética , DNA Ribossômico/genética , Euplotes/fisiologia , Fibroblastos/citologia , Genoma Bacteriano , Humanos , Marinomonas/classificação , Marinomonas/genética , Marinomonas/metabolismo , Nanopartículas Metálicas/química , Filogenia , RNA Ribossômico 16S/genética , Água do Mar/microbiologiaRESUMO
The increase in energy density of the next generation of battery materials to meet the new challenges of the electrical vehicles era calls for innovative and easily scalable materials with sustainable processes. An innovative Cu x O/C nanocomposite material, characterized by a highly conductive 3D-framework, with Cu x O/Cu-metal contiguous nanodomains is prepared by electrospinning. The electrode processing is made using a polyacrylic acid binder. The nanocomposite has been fully characterized and the electrochemical performance shows high specific capacity values over 450 galvanostatic cycles at 500 mAg-1 specific current with capacity retention values over 80 %. In addition, the composite shows remarkable high rate performance and highly stable interface, which has been studied by impedance spectroscopy.
RESUMO
A synthetic Cu-Al-SO4 layered double hydroxide (LDH), analogue to the mineral woodwardite [Cu1-xAlx(SO4)x/2(OH)2·nH2O], with x < 0.5 and n ≤ 3x/2, was synthesised by adding a solution of Cu and Al sulphates to a solution with NaOH. The pH values were kept constant at 8.0 and 10.0 by a continuous addition of NaOH. The material obtained had poor crystallinity, turbostratic structure, and consisted of nanoscopic crystallites. The analyses performed in order to characterise the obtained materials (X-ray diffraction (XRD), thermogravimetry (TG), and Fourier Transform Infra-Red (FTIR) spectroscopy) showed that the Cu-Al-SO4 LDH is very similar to woodwardite, although it has a smaller layer spacing, presumably due to a lesser water content than in natural samples. The synthesis was performed by adding light rare earth elements (LREEs) (La, Ce, and Nd) and heavy rare earth elements (HREEs) (Gd and Y) in order to test the affinity of the Cu-Al-SO4 LDH to the incorporation of REEs. The concentration of rare earth elements (REEs) in the solid fraction was in the range of 3.5-8 wt %. The results showed a good affinity for HREE and Nd, especially for materials synthesised at pH 10.0, whereas the affinities for Ce and La were much lower or non-existent. The thermal decomposition of the REE-doped materials generates a mixture of Cu, Al, and REE oxides, making them interesting as precursors in REE oxide synthesis.
RESUMO
In order to further improve the energy and power density of state-of-the-art lithium-ion batteries (LIBs), new cell chemistries and, therefore, new active materials with alternative storage mechanisms are needed. Herein, we report on the structural and electrochemical characterization of Fe-doped ZnO samples with varying dopant concentrations, potentially serving as anode for LIBs (Rechargeable lithium-ion batteries). The wurtzite structure of the Zn1-xFexO samples (with x ranging from 0 to 0.12) has been refined via the Rietveld method. Cell parameters change only slightly with the Fe content, whereas the crystallinity is strongly affected, presumably due to the presence of defects induced by the Fe3+ substitution for Zn2+. XANES (X-ray absorption near edge structure) data recorded ex situ for Zn0.9Fe0.1O electrodes at different states of charge indicated that Fe, dominantly trivalent in the pristine anode, partially reduces to Fe2+ upon discharge. This finding was supported by a detailed galvanostatic and potentiodynamic investigation of Zn1-xFexO-based electrodes, confirming such an initial reduction of Fe3+ to Fe2+ at potentials higher than 1.2 V (vs. Liâº/Li) upon the initial lithiation, i.e., discharge. Both structural and electrochemical data strongly suggest the presence of cationic vacancies at the tetrahedral sites, induced by the presence of Fe3+ (i.e., one cationic vacancy for every two Fe3+ present in the sample), allowing for the initial Li⺠insertion into the ZnO lattice prior to the subsequent conversion and alloying reaction.
RESUMO
X-ray micro-computer aided tomography (µ-CT), together with optical microscopy and imaging, have been applied to the study of six moldavite samples. These techniques enabled a complete characterization to be made of the textural features of both Muong Nong-type and common splashform moldavites. A detailed study of the size and distribution of pores or bubbles confirmed the marked variability in pore size among the samples, as well as within each sample, and indicated in the Muong Nong-type moldavites the presence of at least two deformation stages which occurred before and after pore formation.
RESUMO
A high-temperature furnace with an induction heater coil has been designed and constructed for in situ X-ray spectroscopic experiments under controlled atmospheric conditions and temperatures up to 3275 K. The multi-purpose chamber design allows working in backscattering and normal fluorescence mode for synchrotron X-ray absorption and emission spectroscopy. The use of the furnace is demonstrated in a study of the in situ formation of Cr oxide between 1823 K and 2023 K at logPO(2) values between -10.0 and -11.3 using X-ray absorption near-edge spectroscopy. The set-up is of particular interest for studying liquid metals, alloys and other electrically conductive materials under extreme conditions.