RESUMO
The properties of a material can be engineered by manipulating its atomic and chemical architecture. Nanoglasses which have been recently invented and comprise nanosized glassy particles separated by amorphous interfaces, have shown promising properties. A potential way to exploit the structural benefits of nanoglasses and of nanocrystalline materials is to optimize the composition to obtain crystals forming within the glassy particles. Here, a metastable Fe-10 at% Sc nanoglass is synthesized. A complex hierarchical microstructure is evidenced experimentally at the atomic scale. This bulk material comprises grains of a Fe90 Sc10 amorphous matrix separated by an amorphous interfacial network enriched and likely stabilized by hydrogen, and property-enhancing pure-Fe nanocrystals self-assembled within the matrix. This composite structure leads a yield strength above 2.5 GPa with an exceptional quasi-homogeneous plastic flow of more than 60% in compression. This work opens new pathways to design materials with even superior properties.
RESUMO
The phase of de Broglie matter waves is a sensitive probe for small forces. In particular, the attractive van der Waals force experienced by polarizable atoms in the close vicinity of neutral surfaces is of importance in nanoscale systems. It results in a phase shift that can be observed in matter-wave diffraction experiments. Here, we observe Poisson spot diffraction of indium atoms at submillimeter distances behind spherical submicron silicon dioxide particles to probe the dispersion forces between atoms and the particle surfaces. We compare the measured relative intensity of Poisson's spot to theoretical results derived from first principles in an earlier communication and find a clear signature of the atom-surface interaction.
RESUMO
Metallic glass (MG) ultrathin films with hierarchical structure were in situ grown and characterized by scanning tunneling microscopy. A reversible dynamic behavior is observed at 77 K indicating a high mobility within the Fe85Sc15 MG ultrathin films. The complete scheme of the phase transition from amorphous solid to supercooled liquid and further to the crystalline phase is depicted. We find Fe85Sc15 MG ultrathin films with a reduction of the glass transition temperature of â¼290 K and an expanded temperature window of the supercooled liquid region of 180 K, which is almost 6 times larger than that of the conventional bulk MG with identical composition.
RESUMO
One of the central themes in the amorphous materials research is to understand the nanoscale structural responses to mechanical and thermal agitations, the decoding of which is expected to provide new insights into the complex amorphous structural-property relationship. For common metallic glasses, their inherent atomic structural inhomogeneities can be rejuvenated and amplified by cryogenic thermal cycling, thus can be decoded from their responses to mechanical and thermal agitations. Here, we reported an anomalous mechanical response of a new kind of metallic glass (nanoglass) with nanoscale interface structures to cryogenic thermal cycling. As compared to those metallic glasses by liquid quenching, the Sc75Fe25 (at. %) nanoglass exhibits a decrease in the Young's modulus but a significant increase in the yield strength after cryogenic cycling treatments. The abnormal mechanical property change can be attributed to the complex atomic rearrangements at the short- and medium- range orders due to the intrinsic nonuniformity of the nanoglass architecture. The present work gives a new route for designing high-performance metallic glassy materials by manipulating their atomic structures and helps for understanding the complex atomic structure-property relationship in amorphous materials.
RESUMO
Today's technologies are primarily based on crystalline materials (metals, semiconductors, etc.), as their properties can be controlled by varying their chemical and/or defect microstructures. This is not possible in today's glasses. The new features of nanoglasses--consisting of nanometer-sized glassy regions connected by interfaces--are that their properties may be controlled by varying their chemical and/or defect microstructures, and that their interfaces have a new kind of non-crystalline structure. By utilizing these new features, an age of new technologies based on non-crystalline materials (a "glass age") may be initiated.
RESUMO
Self-assembly of nanoparticles has emerged as a powerful technique to integrate nanoparticles into well-defined ensembles with collective properties that are different from those of individual nanoparticles and bulk materials with the same chemical composition. Compared with the classical ion/molecule-mediated crystal growth, particle-mediated crystallographically ordered self-assembly is considered as "non-classical crystallization" and the resultant product is termed a "mesocrystal". In this tutorial review, we begin by summarizing the progresses of this field during last decade. Secondly, we outline developments in related fields such as grain rotation and oriented attachment as well as mesocrystals. Thridly, the recent progress in the syntheses of mesocrystals particularly in metals, and the related properties are introduced. Finally, some of the current open questions are discussed.
RESUMO
The development of high-strength metals has driven the endeavor of pushing the limit of grain size (d) reduction according to the Hall-Petch law. But the continuous grain refinement is particularly challenging, raising also the problem of inverse Hall-Petch effect. Here, we show that the nanograined metals (NMs) with d of tens of nanometers could be strengthened to the level comparable to or even beyond that of the extremely-fine NMs (d ~ 5 nm) attributing to the dislocation exhaustion. We design the Fe-Ni NM with intergranular Ni enrichment. The results show triggering of structural transformation at grain boundaries (GBs) at low temperature, which consumes lattice dislocations significantly. Therefore, the plasticity in the dislocation-exhausted NMs is suggested to be dominated by the activation of GB dislocation sources, leading to the ultra-hardening effect. This approach demonstrates a new pathway to explore NMs with desired properties by tailoring phase transformations via GB physico-chemical engineering.
RESUMO
The origin of the astonishing properties of recently discovered ultrastable nanoglasses is presently not well understood. Nanoglasses appear to exhibit density variations not common in bulk glasses and differ significantly in thermal, magnetic, biocompatible, and mechanic properties from the bulk materials of the same composition. Here, we investigate a generic model system that permits modeling of both the physical vapor deposition process (PVD) of the nanoparticles and their consolidation into a nanoglass. We performed molecular dynamics simulations to investigate the PVD process generating nanometer-sized noncrystalline clusters and the formation of the PVD-nanoglass when these nanoclusters are consolidated. In agreement with the experiments, we find that the resulting PVD-nanoglass consists of two structural components: noncrystalline nanometer-sized cores and interfacial regions that are formed during the consolidation process. The interfacial regions were found to have an atomic structure and an internal energy that differ from the structure and internal energy of the corresponding melt-quenched glass. The resulting material represents a noncrystalline state that differs from a bulk glass with the same chemical composition and a glass obtained from nanoparticles derived from the bulk glass.
RESUMO
Synthesized from ultrafine particles with a bottom-up approach, nanoglasses are of particular importance in pursuing unique properties. Here, we design a metallic nanoglass alloy from two components of â¼Cu64Sc36 and â¼Fe90Sc10 nanoglasses. With nanoalloying mutually immiscible Fe and Cu, the properties of the nanoglass alloys can be tuned by varying the proportions of the â¼Fe90Sc10 component. This offers opportunity to create novel metallic glass nanocomposites and sheds light on building a structure-property correlation for the nanoglass alloys.
RESUMO
Grain/interphase boundaries/interfaces of varying misorientations, free volume fractions, curvatures and irregularities are present in materials, both 3D and 2D, regardless of whether these materials are crystalline or amorphous/glassy. Therefore, a question arises about the central idea on which a general description of grain/interphase boundaries/interfaces can and should be based. It is suggested that a generalized model of a structural/basic unit (crystalline, non-crystalline or of any scale), which depends on the interatomic (including electronic) interactions, the spatial distribution of the atoms and electrons, the number of atoms and free volume fraction present in the structural/basic unit and the experimental conditions should serve the purpose. As the development of a quantitative model, which reflects the effects of all these variables is difficult, slightly defective material boundaries are often modeled by treating the entire boundary as planar and by using the concepts of crystallography. For highly disordered boundaries, a description in terms of a representative volume, made up of a non-crystalline basic unit or a combination of such units, which depend on interatomic (including electronic) interactions and forces, is advocated. The size, shape, free volume fraction and number of atoms in the representative volume could differ with material composition and experimental conditions. In the latter approach, it is assumed that all processes connected to a problem on hand is contained within this representative volume. The unresolved issues are identified.
RESUMO
Nanoglasses are a new class of noncrystalline solids. They differ from today's glasses due to their microstructure that resembles the microstructure of polycrystals. They consist of regions with a melt-quenched glassy structure connected by interfacial regions, the structure of which is characterized (in comparison to the corresponding melt-quenched glass) by (1) a reduced (up to about 10%) density, (2) a reduced (up to about 20%) number of nearest-neighbor atoms and (3) a different electronic structure. Due to their new kind of atomic and electronic structure, the properties of nanoglasses may be modified by (1) controlling the size of the glassy regions (i.e., the volume fraction of the interfacial regions) and/or (2) by varying their chemical composition. Nanoglasses exhibit new properties, e.g., a Fe90Sc10 nanoglass is (at 300 K) a strong ferromagnet whereas the corresponding melt-quenched glass is paramagnetic. Moreover, nanoglasses were noted to be more ductile, more biocompatible, and catalytically more active than the corresponding melt-quenched glasses. Hence, this new class of noncrystalline materials may open the way to technologies utilizing the new properties.
RESUMO
Owing to recent progress in nanotechnology, the ability to tune the surface properties of metals has opened an avenue for creating a new generation of biomaterials. Here we demonstrate the successful development of a novel Ti-based nanoglass composite with submicron-nanometer-sized hierarchical glassy structures. A first exploratory study was performed on the application of the unique nanostructure to modulate osteoblast behaviors. Our results show that this Ti-based nanoglass composite, relative to conventional metallic glasses, exhibits significantly improved biocompatibility. In fact, a 10 times enhancement in cell proliferation has been achieved. To a great extent, this superior bioactivity (such as enhanced cell proliferation and osteogenic phenotype) is promoted by its unique hierarchical structures combining nanoglobules and submicron button-like clusters from collective packing of these nanoglobules. This nanoglass composite could be widely applicable for surface modifications by means of coating on various materials including BMGs, crystalline metals or ceramics. Therefore, our successful experimental testing of this nanostructured metallic glass may open the way to new applications in novel biomaterial design for the purpose of bone replacement.
RESUMO
The mechanical behaviour of nanocrystalline materials (that is, polycrystals with a grain size of less than 100 nm) remains controversial. Although it is commonly accepted that the intrinsic deformation behaviour of these materials arises from the interplay between dislocation and grain-boundary processes, little is known about the specific deformation mechanisms. Here we use large-scale molecular-dynamics simulations to elucidate this intricate interplay during room-temperature plastic deformation of model nanocrystalline Al microstructures. We demonstrate that, in contrast to coarse-grained Al, mechanical twinning may play an important role in the deformation behaviour of nanocrystalline Al. Our results illustrate that this type of simulation has now advanced to a level where it provides a powerful new tool for elucidating and quantifying--in a degree of detail not possible experimentally--the atomic-level mechanisms controlling the complex dislocation and grain-boundary processes in heavily deformed materials with a submicrometre grain size.