Formation of Polymer-like Nanochains with Short Lithium-Lithium Distances in a Water-in-Salt Electrolyte.

Water-in-salts (WiSs) have recently emerged as promising electrolytes for energy storage applications ranging from aqueous batteries to supercapacitors. Here, ab initio molecular dynamics is used to study the structure of a 21 m LiTFSI WiS. The simulation reveals a new feature, in which the lithium ions form polymer-like nanochains that involve up to 10 ions. Despite the strong Coulombic interaction between them, the ions in the chains are found at a distance of 2.5 Å. They show a drastically different solvation shell compared to that of the isolated ions, in which they share on average two water molecules. The nanochains have a highly transient character due to the low free energy barrier for forming/breaking them. Providing new insights into the nanostructure of WiS electrolytes, our work calls for reevaluating our current knowledge of highly concentrated electrolytes and the impact of the modification of the solvation of active species on their electrochemical performances.

Speciation of the proton in water-in-salt electrolytes.

Water-in-salt (WiS) electrolytes are promising systems for a variety of energy storage devices. Indeed, they represent a great alternative to conventional organic electrolytes thanks to their environmental friendliness, non-flammability, and good electrochemical stability. Understanding the behaviour of such systems and their local organisation is a key direction for their rational design and successful implementation at the industrial scale. In the present paper, we focus our investigation on the 21 m bis(trifluoromethanesulfonyl)imide (LiTFSI) WiS electrolyte, recently reported to have acidic pH values. We explore the speciation of an excess proton in this system and its dependence on the initial local environment using ab initio molecular dynamics simulations. In particular, we observe the formation of HTFSI acid in the WiS system, known to act as a superacid in water. This acid is stabilised in the WiS solution for several picoseconds thanks to the formation of a complex with water molecules and a neighboring TFSI- anion. We further investigate how the excess proton affects the microstructure of WiS, in particular, the recently observed oligomerisation of lithium cations, and we report possible notable perturbations of the lithium nanochain organisation. These two phenomena are particularly important when considering WiS as electrolytes in batteries and supercapacitors, and our results contribute to the comprehension of these systems at the molecular level.

Charge transfer and polarisability in ionic liquids: a case study.

The practical use of ionic liquids (ILs) is benefiting from a growing understanding of the underpinning structural and dynamic properties, facilitated through classical molecular dynamics (MD) simulations. The predictive and explanatory power of a classical MD simulation is inextricably linked to the underlying force field. A key aspect of the forcefield for ILs is the ability to recover charge based interactions. Our focus in this paper is on the description and recovery of charge transfer and polarisability effects, demonstrated through MD simulations of the widely used 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4C1im][NTf2] IL. We study the charge distributions generated by a range of ab initio methods, and present an interpolation method for determining atom-wise scaled partial charges. Two novel methods for determining the mean field (total) charge transfer from anion to cation are presented. The impact of using different charge models and different partial charge scaling (unscaled, uniformly scaled, atom-wise scaled) are compared to fully polarisable simulations. We study a range of Drude particle explicitly polarisable potentials and shed light on the performance of current approaches to counter known problems. It is demonstrated that small changes in the charge description and MD methodology can have a significant impact; biasing some properties, while leaving others unaffected within the structural and dynamic domains.

MetalWalls: Simulating electrochemical interfaces between polarizable electrolytes and metallic electrodes.

Electrochemistry is central to many applications, ranging from biology to energy science. Studies now involve a wide range of techniques, both experimental and theoretical. Modeling and simulations methods, such as density functional theory or molecular dynamics, provide key information on the structural and dynamic properties of the systems. Of particular importance are polarization effects of the electrode/electrolyte interface, which are difficult to simulate accurately. Here, we show how these electrostatic interactions are taken into account in the framework of the Ewald summation method. We discuss, in particular, the formal setup for calculations that enforce periodic boundary conditions in two directions, a geometry that more closely reflects the characteristics of typical electrolyte/electrode systems and presents some differences with respect to the more common case of periodic boundary conditions in three dimensions. These formal developments are implemented and tested in MetalWalls, a molecular dynamics software that captures the polarization of the electrolyte and allows the simulation of electrodes maintained at a constant potential. We also discuss the technical aspects involved in the calculation of two sets of coupled degrees of freedom, namely the induced dipoles and the electrode charges. We validate the implementation, first on simple systems, then on the well-known interface between graphite electrodes and a room-temperature ionic liquid. We finally illustrate the capabilities of MetalWalls by studying the adsorption of a complex functionalized electrolyte on a graphite electrode.

Improved carbon dioxide absorption in double-charged ionic liquids.

Four divalent ionic liquids based on imidazolium cations with alkyl or ether functionalized side-chains were synthesised and characterized: 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1H-imidazolium)bromide, [tetraEG(mim)2][Br]2, 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1H-imidazolium)acetate, [tetraEG(mim)2][OAc]2, 1-butyl-3-methylimidazolium malonate, [C4mim]2[Mal], and 3-butyl-1-methylimidazolium glutarate, [C4mim]2[Glut]. Their densities vary between 1.1 and 1.5 g cm-3 and their viscosities between 0.2 and 4 Pa s at 353 K. We found that the molar volumes are not additive, especially in the case of the divalent ionic liquids based on the double-charged imidazolium cations, meaning that they cannot be predicted using common group contribution methods. The reason for this behaviour could be explained by the structure of the cations, which is dominated by intramolecular hydrogen bonding. The carboxylate-based divalent ionic liquids absorb reversibly large quantities of carbon dioxide following a chemical mechanism described before. An improved 1 : 1 stoichiometry is achieved both in a double-charged imidazolium acetate ionic liquid and in imidazolium carboxylate salts with double charged anions. This behaviour places these ionic liquids amongst the best performing for carbon dioxide absorption.

Sodium diffusion in ionic liquid-based electrolytes for Na-ion batteries: the effect of polarizable force fields.

Understanding the transport of sodium ions in ionic liquids is key to designing novel electrolyte materials for sodium-ion batteries. In this work, we combine molecular dynamics simulation and experiments to study how molecular interactions and local ordering affect relevant physico-chemical properties. Ionic transport and local solvation environments are investigated in electrolytes composed of sodium bis(fluorosulfonyl)imide, (Na[FSI]), in N,N-methylpropylpyrrolidinium bis(fluorosulfonyl)imide, [C3C1pyr][FSI], at different salt concentrations. The electrolyte systems are modelled by means of molecular dynamic simulations using a polarizable force field. We show that including polarization effects explicitly in the molecular simulations is required in order to attain a reliable description of the transport properties of sodium in the [C3C1pyr][FSI] electrolyte. The validation of the computational results upon comparison with experimental data allows us to assess the suitability of polarizable force fields in describing and interpreting the structure and dynamics of the sodium salt-ionic liquid system, which is essential to enable the application of IL-based electrolytes in novel energy-storage technologies.

Ion pair free energy surface as a probe of ionic liquid structure.

Numerous combinations of cations and anions are possible for the production of ionic liquids with fine-tuned properties once the correlation with the molecular structure is known. In this sense, computer simulations are useful tools to explain and even predict the properties of ionic liquids. However, quantum mechanical methods are usually restricted to either small clusters or short time scales so that parameterized force fields are required to study the bulk liquids. In this work, a method is proposed to enable a comparison between the quantum mechanical system and both polarizable and nonpolarizable force fields by means of the calculation of free energy surfaces for the translational motion of the anion around the cation in gas phase. This method was tested for imidazolium-based cations with 3 different anions, [BF4]-, [N(CN)2]-, and [NTf2]-. Better agreement was found with the density functional theory calculations when polarizability is introduced in the force field. In addition, the ion pair free energy surfaces reproduced the main structural patterns observed in the first coordination shell in molecular dynamics simulations of the bulk liquid, proving to be useful probes for the liquid phase structure that can be computed with higher level methods and the comparison with forcefields can indicate further improvements in their parameterization.

The local structure in the BmimPF6/acetonitrile mixture: the charge distribution effect.

The changes of the local structure in the binary mixture of 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6) ionic liquid and acetonitrile are investigated over the entire composition range. Two charge distribution models of the ions are considered: in the first one, the atomic fractional charges of the cations and anions are kept equal with those in the neat ionic liquid, and hence they are independent from the mole fraction of the ionic liquid, while in the second one the charge distribution is scaled up by a mole fraction dependent factor. The sum of these charges converge to +1e and -1e on the cation and anion, respectively, at infinite dilution. All the other interactions and geometry parameters of the ions (i.e., Lennard-Jones, bond stretching, angle bending and dihedral parameters) are identical in the two cases. The effect of the fractional charge distribution on the hydrogen bonding between the counterions themselves and between the ions and solvent molecules, as well as on the stacking interactions between the cations, is analyzed. To this end, two distances, characteristic of the hydrogen bond formed by the donor moiety and its nearest neighbor acceptor, as well as a coordinate system that defines unambiguously the orientation between a reference cation and its nearest neighbor, are introduced. It is shown that, with the variable charge model, the neighboring cation-anion pairs maintain their relative arrangement similar to the neat ionic liquid down to an ionic liquid mole fraction of xIL = 0.10, whereas in the case of the constant charge model such changes occur already at xIL = 0.20. Furthermore, the analysis of the first and the second nearest neighbor distance distributions of an anion around a reference cation indicates that, at this mole fraction range, there are two different preferred arrangements of the anions around the cations. In the first one, similarly to the local structure around a reference cation in the neat ionic liquid, the anion forms a distorted hydrogen bond with the cation, while in the second one the anion is located farther from the cation, forming no hydrogen bond with it. The relative population of these two types of preferred nearest neighbor cation-anion arrangements is found to be sensitive to further decrease of the ionic liquid mole fraction. These findings correlate with experimental results concerning the behavior of many physical chemical properties (e.g., excess volume, excess viscosity, chemical shift, infrared and Raman vibrational mode shifts, diffusion, etc.) that were found to undergo a drastic change in this mole fraction range. Our results show that in this composition range a transition occurs from the situation where the macroscopic physical chemical properties of the system are determined primarily by the cation-anion hydrogen bonding interactions to that where they are determined by the solvation of the cation and the anion by the molecular solvent.

Solvation-Tuned Photoacid as a Stable Light-Driven pH Switch for CO2 Capture and Release.

Photoacids are organic molecules that release protons under illumination, providing spatiotemporal control of the pH. Such light-driven pH switches offer the ability to cyclically alter the pH of the medium and are highly attractive for a wide variety of applications, including CO2 capture. Although photoacids such as protonated merocyanine can enable fully reversible pH cycling in water, they have a limited chemical stability against hydrolysis (<24 h). Moreover, these photoacids have low solubility, which limits the pH-switching ability in a buffered solution such as dissolved CO2. In this work, we introduce a simple pathway to dramatically increase stability and solubility of photoacids by tuning their solvation environment in binary solvent mixtures. We show that a preferential solvation of merocyanine by aprotic solvent molecules results in a 60% increase in pH modulation magnitude when compared to the behavior in pure water and can withstand stable cycling for >350 h. Our results suggest that a very high stability of merocyanine photoacids can be achieved in the right solvent mixtures, offering a way to bypass complex structural modifications of photoacid molecules and serving as the key milestone toward their application in a photodriven CO2 capture process.

Attraction between Like Charged Ions in Ionic Liquids: Unveiling the Enigma of Tetracyanoborate Anions.

Intermolecular interactions in ionic liquids are mainly governed by Coulombic forces. Attraction between cations has been previously observed and was attributed to dispersion interactions between nonpolar moieties, hydrogen bonding, or π stacking. In this study, we present the intriguing behavior of tetracyanoborate anions in ionic liquids that, unlike their dicyanamide and tricyanomethanide counterparts, form dimers in both solid and liquid phases. A joint simulation and experimental study uncovers the origin of such anion-anion attraction: stabilization by induction and dispersion forces between several cyano groups, which is strong enough to overcome electrostatic repulsion. These findings open up new opportunities in the rational design of ionic liquids, where interactions between ions of the same charge can be controlled and fine-tuned by the presence of cyano groups.

Accounting for the Quantum Capacitance of Graphite in Constant Potential Molecular Dynamics Simulations.

Molecular dynamics (MD) simulations at a constant electric potential are an essential tool to study electrochemical processes, providing microscopic information on the structural, thermodynamic, and dynamical properties. Despite the numerous advances in the simulation of electrodes, they fail to accurately represent the electronic structure of materials such as graphite. In this work, a simple parameterization method that allows to tune the metallicity of the electrode based on a quantum chemistry calculation of the density of states (DOS) is introduced. As a first illustration, the interface between graphite electrodes and two different liquid electrolytes, an aqueous solution of NaCl and a pure ionic liquid, at different applied potentials are studied. It is shown that the simulations reproduce qualitatively the experimentally-measured capacitance; in particular, they yield a minimum of capacitance at the point of zero charge (PZC), which is due to the quantum capacitance (QC) contribution. An analysis of the structure of the adsorbed liquids allows to understand why the ionic liquid displays a lower capacitance despite its large ionic concentration. In addition to its relevance for the important class of carbonaceous electrodes, this method can be applied to any electrode materials (e.g. 2D materials, conducting polymers, etc), thus enabling molecular simulation studies of complex electrochemical devices in the future.

Electrochemical Properties and Local Structure of the TEMPO/TEMPO+ Redox Pair in Ionic Liquids.

Redox-active organic species play an important role in catalysis, energy storage, and biotechnology. One of the representatives is the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical, used as a mediator in organic synthesis and considered a safe alternative to heavy metals. In order to develop a TEMPO-based system with well-controlled electrochemical and catalytic properties, a reaction medium should be carefully chosen. Being highly conductive, stable, and low flammability fluids, ionic liquids (ILs) seem to be promising solvents with easily adjustable physical and solvation properties. In this work, we give an insight into the local structure of ILs around TEMPO and its oxidized form, TEMPO+, underlining striking differences in the solvation of these two species. The analysis is coupled with a study of thermodynamics and kinetics of oxidation in the frame of Marcus theory. Our systematic investigation includes imidazolium, pyrrolydinium, and phosphonium families combined with anions of different size, polarity, and flexibility, opting to provide a clear and comprehensive picture of the impact of the nature of IL ions on the behavior of radical/cation redox pairs. The obtained results will help to explain experimentally observed effects and to rationalize the design of TEMPO/IL systems.

Disclosing the Interfacial Electrolyte Structure of Na-Insertion Electrode Materials: Origins of the Desolvation Phenomenon.

Among a variety of promising cathode materials for Na-ion batteries, polyanionic Na-insertion compounds are among the preferred choices due to known fast sodium transfer through the ion channels along their framework structures. The most interesting representatives are Na3V2(PO4)3 (NVP) and Na3V2(PO4)2F3 (NVPF), which display large Na+ diffusion coefficients (up to 10-9 m2 s-1 in NVP) and high voltage plateaux (up to 4.2 V for NVPF). While the diffusion in the solid material is well-known to be the rate-limiting step during charging, already being thoroughly discussed in the literature, interfacial transport of sodium ions from the liquid electrolyte toward the electrode was recently shown to be important due to complex ion desolvation effects at the surface. In order to fill the blanks in the description of the electrode/electrolyte interface in Na-ion batteries, we performed a molecular dynamics study of the local nanostructure of a series of carbonate-based sodium electrolytes at the NVP and the NVPF interfaces along with careful examination of the desolvation phenomenon. We show that the tightness of solvent packing at the electrode surface is a major factor determining the height of the free energy barrier associated with desolvation, which explains the differences between the NVP and the NVPF structures. To rationalize and emphasize the remarkable properties of this family of cathode materials, a complementary comparative analysis of the same electrolyte system at the carbon electrode interface was also performed.

Insights into structure-property relationships in ionic liquids using cyclic perfluoroalkylsulfonylimides.

Room temperature ionic liquids of cyclic sulfonimide anions ncPFSI (ring size: n = 4-6) with the cations [EMIm]+ (1-ethyl-3-methylimidazolium), [BMIm]+ (1-butyl-3-methylimidazolium) and [BMPL]+ (BMPL = 1-butyl-1-methylpyrrolidinium) have been synthesized. Their solid-state structures have been elucidated by single-crystal X-ray diffraction and their physicochemical properties (thermal behaviour and stability, dynamic viscosity and specific conductivity) have been assessed. In addition, the ion diffusion was studied by pulsed field gradient stimulated echo (PFGSTE) NMR spectroscopy. The decisive influence of the ring size of the cyclic sulfonimide anions on the physicochemical properties of the ILs has been revealed. All ILs show different properties compared to those of the non-cyclic TFSI anion. While these differences are especially distinct for ILs with the very rigid 6cPFSI anion, the 5-membered ring anion 5cPFSI was found to result in ILs with relatively similar properties. The difference between the properties of the TFSI anion and the cyclic sulfonimide anions has been rationalized by the rigidity (conformational lock) of the cyclic sulfonimide anions. The comparison of selected IL properties was augmented by MD simulations. These highlight the importance of π+-π+ interactions between pairs of [EMIm]+ cations in the liquid phase. The π+-π+ interactions are evident for the solid state from the molecular structures of the [EMIm]+-ILs with the three cyclic imide anions determined by single-crystal X-ray diffraction.

Unravelling free volume in branched-cation ionic liquids based on silicon.

The branching of ionic liquid cation sidechains utilizing silicon as the backbone was explored and it was found that this structural feature leads to fluids with remarkably low density and viscosity. The relatively low liquid densities suggest a large free volume in these liquids. Argon solubility was measured using a precise saturation method to probe the relative free volumes. Argon molar solubilities were slightly higher in ionic liquids with alkylsilane and siloxane groups within the cation, compared to carbon-based branched groups. The anion size, however, showed by far the dominant effect on argon solubility. Thermodynamic solvation parameters were derived from the solubility data and the argon solvation environment was modelled utilizing the polarizable CL&Pol force field. Semiquantitative analysis was in agreement with trends established from the experimental data. The results of this investigation demonstrate design principles for targeted ionic liquids when optimisation for the free volume is required, and demonstrate the utility of argon as a simple, noninteracting probe. As more ionic liquids find their way into industrial processes of scale, these findings are important for their utilisation in the capture of any gaseous solute, gas separation, or in processes involving the transformation of gases or small molecules.

Flexibility is the key to tuning the transport properties of fluorinated imide-based ionic liquids.

Ionic liquids are becoming increasingly popular for practical applications such as biomass processing and lithium-ion batteries. However, identifying ionic liquids with optimal properties for specific applications by trial and error is extremely inefficient since there are a vast number of potential candidate ions. Here we combine experimental and computational techniques to determine how the interplay of fluorination, flexibility and mass affects the transport properties of ionic liquids with the popular imide anion. We observe that fluorination and flexibility have a large impact on properties such as viscosity, whereas the influence of mass is negligible. Using targeted modifications, we show that conformational flexibility provides a significant contribution to the success of fluorination as a design element. Contrary to conventional wisdom, fluorination by itself is thus not a guarantor for beneficial properties such as low viscosity.