Effects of chronic exposure to the water-soluble fraction of crude oil and in situ burn residue of oil on egg-bearing Northern shrimp (Pandalus borealis).

Oil spill clean-up measures using in situ burning can potentially result in seafloor contamination affecting benthic organisms. To mimic realistic exposure and measure effects, ovigerous Northern shrimp were continuously exposed for two weeks to the water-soluble fraction of oil coated on gravel followed by two weeks in clean seawater. North Sea crude oil (NSC) and field generated in situ burn residue (ISBR) of NSC were used (Low: 3 g/kg gravel, Medium: 6 g/kg gravel and High: 12 g/kg gravel). The concentrations of polyaromatic hydrocarbons (PAHs) in the water resulting from NSC were higher compared to ISBR. No mortality was observed in any treatment and overall moderate sublethal effects were found, mostly after exposure to NSC. Feeding was temporarily reduced at higher concentrations of NSC. PAH levels in hepatopancreas tissue were significantly elevated following exposure and still significantly higher at the end of the experiment in NSCHigh and ISBRHigh compared to control. Mild inflammatory response reactions and tissue ultrastructural alterations in gill tissue were observed in both treatments. Signs of necrosis occurred in ISBRHigh. No change in shrimp locomotory activity was noted from NSC exposure. However, ISBR exposure increased activity temporarily. Larvae exposed as pleopod-attached embryos showed significant delay in development from stage I to stage II after exposure to NSCHigh. Based on this study, oil-contaminated seafloor resulting from in situ burning clean-up actions does not appear to cause serious effects on bottom-living shrimp.

Metal-based micro and nanosized pollutant in marine organisms: What can we learn from a combined atomic force microscopy-scanning electron microscopy study.

Atomic force microscopy (AFM) is a consolidated technique for the study of biological systems, usually ex vivo or in culture, under different experimental conditions. Yet, the diffusion of the technique in the scientific context of histology is still rather slow and limited. In the present work, we demonstrate the potential of AFM, in terms of morphological and nanomechanical imaging, to study the effects of nano- and micro-sized metallic pollutants in living biological systems. As a model, we investigated marine molluscs (Mytilus galloprovincialis) grown in the Adriatic Sea. We characterized histological sections from two organs (gonads and digestive glands) of molluscs collected during several surveys at different growth time and distance from gas extraction platforms. We evaluated the effects of nano-pollutants mostly on the local tissue structure by combining AFM microscopy with scanning electron microscopy (SEM). Furthermore, the AFM images allowed evidencing the presence of nano- or micro-sized structures that exhibit different nanomechanical properties compared to the rest of the tissue. The results demonstrate how coupling AFM and SEM analysis can provide an effective procedure to evaluate the morphological alterations produced by the exposure to exogenous nano-pollutants in tissue and constitute a promising way to reveal basic mechanisms mediating the cytotoxicity of specific exogenous pollutants ingested by edible organisms.

Gill damage and delayed mortality of Northern shrimp (Pandalus borealis) after short time exposure to anti-parasitic veterinary medicine containing hydrogen peroxide.

Hydrogen peroxide (H2O2) is used as anti-parasitic veterinary medicine in salmon farms worldwide. In the period from 2009 to 2018 a total of 135 million kg of H2O2 was used in Norway, the world's largest producer of Atlantic salmon. Since the treatment water is discharged to the sea, concerns have been raised about effects of H2O2 on the coastal ecosystem. In the present study, Northern shrimp (Pandalus borealis) have been exposed to short pulses of H2O2 in the PARAMOVE® formulation, followed by a recovery period in clean seawater. The exposure concentrations represented 100, 1000 and 10 000 times dilutions of the prescribed treatment concentration for salmon; 15 mg/L, 1.5 mg/L and 0.15 mg/L H2O2. Significantly increased mortality was observed after 2 h exposure to 15 mg/L H2O2 (50%) and after 2 h exposure to 1.5 mg/L H2O2 on 3 consecutive days (33%), but no mortality was observed after 2 h exposure to 0.15 mg/L. The mortality occurred 2-4 days after the first pulse of exposure. The patterns of acute effects (immobility and death) could be captured with a toxicokinetic-toxicodynamic model (GUTS), which allows extrapolations to LC50s for constant exposure, or thresholds for effects given untested exposure profiles. Effects of H2O2 were also detected in shrimp that survived until the end of the recovery period. The feeding rate was 66% lower than in the control after 12 days of recovery for the three-pulse 1.5 mg/L exposure. Furthermore, dose dependent tissue damage was detected in the gills and evidence of lipid peroxidation in the hepatopancreas in shrimp exposed for 1 h to 1.5 mg/L and 15 mg/L and kept in recovery for 8 days. Fluorescence intensity in the hepatopancreas of treated shrimp increased 47% and 157% at 1.5 mg/L and 15 mg/L, respectively, compared to the control. Local hydrodynamic conditions will determine how fast the concentration of H2O2 will be diluted and how far it will be transported horizontally and vertically. Results from dispersion modelling (literature data) together with the current experiments indicate that treatment water with toxic concentrations of H2O2 (1.5 mg/L) could reach P. borealis living more than 1 km from a treated salmon farm.

Microplastic and PTFE contamination of food from cookware.

Microplastics are a prolific environmental contaminant that have been evidenced in human tissues. Human uptake of microplastic occurs via inhalation of airborne fibres and ingestion of microplastic-contaminated foods and beverages. Plastic and PTFE-coated cookware and food contact materials may release micro- and nanoplastics into food during food preparation. In this study, the extent to which non-plastic, new plastic and old plastic cookware releases microplastics into prepared food is investigated. Jelly is used as a food simulant, undergoing a series of processing steps including heating, cooling, mixing, slicing and storage to replicate food preparation steps undertaken in home kitchens. Using non-plastic cookware did not introduce microplastics to the food simulant. Conversely, using new and old plastic cookware resulted in significant increases in microplastic contamination. Microplastics comprised PTFE, polyethylene and polypropylene particulates and fibrous particles, ranging 13-318 µm. Assuming a meal was prepared daily per the prescribed methodology, new and old plastic cookware may be contributing 2409-4964 microplastics per annum into homecooked food. The health implications of ingesting microplastics remains unclear.

Py-GC-MS analysis for microplastics: Unlocking matrix challenges and sample recovery when analyzing wastewater for polypropylene and polystyrene.

Matrix interference and recovery when using pyrolysis gas chromatography (Py-GC-MS) to analyze wastewater for polystyrene (PS) and polypropylene (PP) microplastics (MP) was studied. Raw wastewater underwent a sample preparation train commonly applied for such matrix. The train consisted of six discrete steps to reduce the organic matter content without affecting MP in the sample. One large wastewater sample was collected, homogenized, and subdivided into 21 subsamples. Three samples were analyzed without further sample preparation. The remaining samples were divided in sets of three, and each set underwent an increasing number of steps of the procedure, up to the last set, which underwent the full treatment. The matrix effect on the determination of PS and PP was statistically evaluated by comparing in-matrix and external calibration curves at each step. Recovery of MP was assessed after each step by adding deuterated PS to the samples. A main finding was that there was no significant matrix effect for these polymers throughout the preparation train, suggesting that matrix components did not interfere with the analytical method. However, a significant loss of polymer mass was found between the steps, which may result in MPs falling below detection limits. Therefore, Py-GC-MS could be used for MP quantification before analysis by other techniques which require more extensive matrix removal. A downside of this approach is that analyzing such samples without matrix reduction will increase the need for instrumental maintenance.

Microplastics and their interaction with microorganisms in Bosten Lake sediment.

Microplastics (MPs), discovered in oceans, lakes, and rivers, can infiltrate the food chain through ingestion by organisms, potentially posing health risks. Our research is the first to study the composition and distribution of MPs in Bosten Lake's sediment. In May, the average abundance of MPs was 0.95±0.72 particles per 10 gs, and in October, it was 0.90±0.61 particles per 10 gs. Bohu Town had the highest MP abundance, with 1.75±0.35 particles per 10 gs in spring and 2 ± 0 particles per 10 gs in autumn. In May, 53 % of the MPs were transparent, while in October, black MPs constituted 58 %. The predominant morphology was fibrous, accounting for 61 % of the total. MPs in the size range of 0.2-1 mm made up 91 % and 66 % of the total in May and October, respectively. The most common types of MPs in May were polyethylene terephthalate (PET) at 40 % and polyethylene (PE) at 26 %. In October, PET was the most prevalent at 71 %, followed by poly(ether-ether-ketone)(PEEK) at 11 %. Certain microbial taxa, such as Actinobacteriota, Pseudomonas, and Vicinamibacteraceae, associated with MP degradation or complex carbon chain breakdown, were notably enriched in sediment areas with high MP concentrations. A significant positive correlation was observed between the abundance of MPs in sediments and Actinobacteriota. Additionally, the abundance of Thiobacillus, Ca.competibacter, and other bacteria involved in soil element cycling showed a significant positive correlation with the organic matter content in the sediments. Anaerobic bacteria like Thermoanaerobacterium displayed a significant positive correlation with water depth. Our study reveals the presence, composition, and distribution of MPs in Bosten Lake's sediments, shedding light on their potential ecological impact.

A recipe for plastic: Expert insights on plastic additives in the marine environment.

The production and consumption of plastic products had been steadily increasing over the years, leading to more plastic waste entering the environment. Plastic pollution is ubiquitous and comes in many types and forms. To enhance or modify their properties, chemical additives are added to plastic items during manufacturing. The presence and leakage of these additives, from managed and mismanaged plastic waste, into the environment are of growing concern. In this study, we gauged, via an online questionnaire, expert knowledge on the use, characteristics, monitoring and risks of plastic additives to the marine environment. We analysed the survey results against actual data to identify and prioritise risks and gaps. Participants also highlighted key factors for future consideration, including gaining a deeper understanding of the use and types of plastic additives, how they leach throughout the entire lifecycle, their toxicity, and the safety of alternative options. More extensive chemical regulation and an evaluation of the essentiality of their use should also be considered.

Distinct polymer-dependent sorption of persistent pollutants associated with Atlantic salmon farming to microplastics.

Interactions of microplastics and persistent organic pollutants (POPs) associated with Atlantic salmon farming were studied to assess the potential role of microplastics in relation to the environmental impact of aquaculture. HDPE, PP, PET and PVC microplastics placed for 3 months near fish farms sorbed POPs from aquafeeds. PET and PVC sorbed significantly higher levels of dioxins and PCBs compared to HDPE, while the levels sorbed to PP were intermediate and did not differ statistically from PET, PVC or HDPE. In addition, the composition of dioxins accumulated in caged blue mussels did not reflect the patterns observed on the microplastics, probably due to polymer-specific affinity of POPs. In conclusion, the results of this study show that microplastics occurring near fish farms can sorb aquafeed-associated POPs and, therefore, microplastics could potentially be vectors of such chemicals in the marine environment and increase the environmental impact of fish farming.

Application of GCMS-pyrolysis to estimate the levels of microplastics in a drinking water supply system.

Communities value water and aquatic environments for a many diverse reasons. Ensuring safe drinking water is prioritized on the political agenda with a dedicated focus on safe and affordable drinking water under the 6th of the UN sustainable development goals. The occurrence of micron sized plastic fragments has been confirmed even in very remote areas. In the present study we analysed drinking water of a medium-sized Norwegian urban area for the presence of microplastics ≥ 1 µm. A modular filtering sampling devices was developed allowing a sequential in-situ enzymatic and mild oxidizing driven sample preparation prior to pyrolysis gas chromatography-mass spectrometry sample's analysis (pyr-GCMS). Samples were taken at different stages of the drinking water supply chain. The total amount of polymers per sites ranged from 6.1 to 93.1 µg/m3. Higher levels were detected in the raw water, but significant reduction rates ranging from 43% to 100% depending on the polymer type were scored after the water treatment processes. Polyethylene, polyamide, and polyester were the most frequently detected polymer types. Overall, the levels of MPs in the raw water influence the occurrence and polymer type occurrence and distribution is the drinking water supply net. This study contributes to the emerging field of plastics pollution in drinking water supply systems by providing effective methods helping with future routine monitoring of this source of human plastic uptake.

Preliminary results on the occurrence and anatomical distribution of microplastics in wild populations of Nephrops norvegicus from the Adriatic Sea.

This study reports the shapes, dimensional classes, types and counts of microplastics (MPs) found in 23 individuals of N. norvegicus collected from two wild populations of the Adriatic Sea (Mediterranean basin). The focus was on three different anatomical compartments (gut, hepatopancreas and tail), which were analysed separately. MPs were found in all the investigated individuals with an average of about 17 MPs/individual. Fragments were predominant over fibers with a ratio of about 3:1. The majority of MPs were in the dimensional range 50-100 µm. The predominant polymers were polyester, polyamide 6, polyvinyl chloride and polyethylene, which together constitute about 61% of all the MPs found. Fragments were more concentrated in the hepatopancreas, with no significant difference between gut and tail, while fibers were more concentrated in the gut than in the tail with hepatopancreas somehow in between. The dimensional class of the MPs influences their anatomical distribution. There were no statistical differences among individuals from the two sampling sites. Sex of the individual did not influence the level of retained MPs, while length had a very marginal effect. The information reported here contributes to understanding of the possible risks linked to human consumption of different tissues from contaminated Norway lobsters.

Drinking plastics? - Quantification and qualification of microplastics in drinking water distribution systems by µFTIR and Py-GCMS.

While it seems indisputable that potable water contains microplastics (MP), the actual concentrations are much debated and reported numbers vary many orders of magnitude. It is difficult to pinpoint the cause of these differences, but it might be variation between waters, variation between quantification methods, and that some studies did not live up to rigorous analytical standards. Despite the urgent need to understand human exposure by drinking water, there is a lack of trustable methods generating reliable data. Essentially, proper MP assessment requires that quality assurance is in place and demonstrated, that an adequate volume of drinking water is assessed, and that differences in analytical methods are understood. This study presents a systematic and robust approach where MP down to 6.6 µm were assessed in potable water distribution systems in terms of quantity, size, shape, and material. For the first time, sub-samples were analysed by two of the most validated and complementary analytical techniques: µFTIR imaging and Py-GCMS. Both methods successfully determined low contents in drinking water. However, µFTIR and Py-GCMS identified different polymer types in samples with overall low MP content. With increasing concentration of a given polymer type, the values determined by the techniques became more comparable. Most detected MPs were smaller than 150 µm, and 32% were smaller than 20 µm. Our results indicate a potential annual uptake of less than one MP per person, suggesting that drinking potable water produced at a high-performance drinking water treatment plant represents a low risk for human health.

Moving forward in microplastic research: A Norwegian perspective.

Given the increasing attention on the occurrence of microplastics in the environment, and the potential environmental threats they pose, there is a need for researchers to move quickly from basic understanding to applied science that supports decision makers in finding feasible mitigation measures and solutions. At the same time, they must provide sufficient, accurate and clear information to the media, public and other relevant groups (e.g., NGOs). Key requirements include systematic and coordinated research efforts to enable evidence-based decision making and to develop efficient policy measures on all scales (national, regional and global). To achieve this, collaboration between key actors is essential and should include researchers from multiple disciplines, policymakers, authorities, civil and industry organizations, and the public. This further requires clear and informative communication processes, and open and continuous dialogues between all actors. Cross-discipline dialogues between researchers should focus on scientific quality and harmonization, defining and accurately communicating the state of knowledge, and prioritization of topics that are critical for both research and policy, with the common goal to establish and update action plans for holistic benefit. In Norway, cross-sectoral collaboration has been fundamental in supporting the national strategy to address plastic pollution. Researchers, stakeholders and the environmental authorities have come together to exchange knowledge, identify knowledge gaps, and set targeted and feasible measures to tackle one of the most challenging aspects of plastic pollution: microplastic. In this article, we present a Norwegian perspective on the state of knowledge on microplastic research efforts. Norway's involvement in international efforts to combat plastic pollution aims at serving as an example of how key actors can collaborate synergistically to share knowledge, address shortcomings, and outline ways forward to address environmental challenges.

qPCR-based assessment of microfaunal indicators of oil for monitoring benthos around oil and gas platforms.

Today's benthic offshore biological monitoring of oil & gas (O&G) activities relies on macrofauna taxa enumeration. For the future, analysis of DNA isolated directly from sediments holds great potential for multi-trophic biodiversity surveys and the monitoring of a larger spectrum of benthic taxa, including micro-fauna. Here, we evaluate more specifically the potential of microfauna-specific gene quantification in relation to both petroleum-related discharge compounds and other seafloor environmental properties. We carried out this evaluation using sediment samples collected at drilling Region III on the Norwegian continental shelf where DNA metabarcoding of eukaryotic diversity was already performed. Generally, the quantification of microfauna indicator taxa related well to the gradient of contamination on the seafloor. Contrary to eukaryotic Euplotida, metabarcoding data and qPCR numbers for indicative prokaryotic taxa showed the same relationship to offshore contaminants (both showed positive relationship). We found absolute numbers of SSU rRNA gene copies of (1) Dinophyceae, Bacillariophyceae and Alcanivorax were correlated with the level of petroleum-related compounds but not with other environmental variables, (2) bacteria closely related to Shewanella were correlated with the concentration of Ba, PAH, as well to percent of gravel, (3) Desulfobacteriales correlated with petroleum-related contaminants, but as well with percent of gravel and grain size. Findings from our study suggest that biomonitoring surveys of O&G activities on benthos could benefit from quantification of specific micro-fauna indicators that is simpler and faster than the methods currently used for impact assessment of benthos.

First occurrence and composition assessment of microplastics in native mussels collected from coastal and offshore areas of the northern and central Adriatic Sea.

In recent years, the occurrence of microplastics in the aquatic environment has gathered increasing scientific interest. Several studies have shown that the ingestion of microplastics may negatively influence the physiology of marine organisms having different feeding strategies, particularly in those species which cannot discriminate between food sources. Recent studies highlighted the potential for such particles to accumulate in the food web, posing risks to human health via the consumption of seafood. Furthermore, early findings also indicated the role of microplastics as vectors of chemical pollutants either used as additives during synthesis of the plastics or adsorbed directly from seawater, i.e., PAHs, PCB, and surfactants. Despite the importance of microplastics in adsorption and transport of hydrophobic pollutants, little is known about their distribution and accumulation in marine food webs, or their direct and indirect harmful effects. The Adriatic Sea represents a semi-enclosed basin with a low water recirculation rate and high anthropogenic pressures associated with unsustainable fishing and inputs of contaminants. The body burden, accumulation rates, polymer composition, and recurring morphotypes of microplastics in native blue mussels (M. galloprovincialis) were examined. Organisms collected offshore were compared to those collected in coastal areas. Microplastics were recovered from the soft tissues of all analyzed mussels. Coastal organisms showed a load of 1.06-1.33 fragments g-1 (wet weight) and 0.62-0.63 fibers g-1 (wet weight) while offshore organisms showed an accumulation of 0.65-0.66 fragments g-1 (wet weight) and 0.24-0.35 fibers g-1 (wet weight). The size class distribution revealed a marked prevalence of smaller particles (20 µm to 40 µm range) and the most recurring polymer type in analyzed organisms was PE followed by PP, PET, and equal amounts of PS, PLY, and PVC. A significant site-, time-, and oceanographic-related distribution trend was observed. Based on the findings presented here, there is a clear need to implement a seafood safety monitoring program to better understand actual human health-related risks.

First record of characterization, concentration and distribution of microplastics in coastal sediments of an urban fjord in south west Norway using a thermal degradation method.

Plastic waste is of increasing concern in the aquatic environment. A large proportion of plastic waste is generated onshore from where it eventually reaches the marine environment, which is considered the main sink of plastic debris To date there is a substantial lack of knowledge on the composition of these accumulated polymers, their environmental levels and distribution in marine and coastal areas. Current efforts are underway to develop standardized methods to characterize and quantify the occurrence of microplastic in different environmental matrices using microscopy-oriented methods using Fourier Transformed Infra-Red (FTIR) or Raman techniques. However, time-consuming sample preparation, processing and interpretation of complex data limits their use within monitoring programs. As an alternative, a thermal degradation method based on a gas chromatographic mass spectrometer coupled with pyrolysis represents a validated method for qualitative and quantitative polymer analyses. A technique has been developed that combines sample preparation and thermo-analysis for identifying microplastics in samples of marine sediment. Quantification and polymeric composition of plastic particles found in sediment samples taken from ten sites located in Boknafjorden subjected to diverse sources of pollution and anthropogenic pressure were investigated. Plastic microparticles were extracted from 8 kg of wet sediments per site, purified, size-fractionated thorough a set of stainless-steel certified sieves covering the range of 10-250 µm mesh size, pre-concentrated on fiberglass filters and whole filters analyzed by thermal desorption pyrolysis gas chromatography/mass spectrometry. Most of the detected polymers were identified as polypropylene, polyethylene, polyethylene terephthalate, polyvinylchloride, polystyrene or polyamide. In most of the sites, the largest fraction of the extracted micro debris fell in the size range 10-40 µm. Some shifts in size distribution were also observed in some sites and were likely related to the marine sea bottom currents and the influence of specific anthropogenic activities. The adopted thermal degradation method showed good sensitivity, reliability and rapidity and therefore represents a promising technique for microplastic analysis within monitoring activities.

Natural and synthetic endocrine disrupting compounds (EDCs) in water, sediment and biota of a coastal lagoon.

We report a survey on the occurrence and distribution of natural (17beta-estradiol, E2; estrone, E1) and synthetic (nonylphenol, NP; nonylphenol monoethoxylate carboxylate, NP1EC; bisphenol-A, BPA; benzophenone, BP; mestranol, MES; 17alpha-ethinylestradiol, EE2; diethylstilbestrol, DES) endocrine disrupting compounds (EDCs) in water, sediment and biota (Mediterranean mussel, Mytilus galloprovincialis) in the Venice lagoon, a highly urbanized coastal water ecosystem that receives both industrial and municipal wastewater effluents. The survey was preceded by the development of tailor made extraction and clean-up procedures for the simultaneous HPLC-ESI-MS determination of all examined EDCs in sediment and biota samples. Satisfactory extraction performances and method detection limits (MDLs) were obtained for almost all EDCs. Most of the selected compounds were found in water and sediment (concentration range: 2.8-211 ng/L, and 3.1-289 microg/kg, d.w., respectively), while only 17alpha-ethinylestradiol and nonylphenol were recorded in biota samples (conc. range: 7.2-240 ng/g, d.w.). 17beta-estradiol and ethinylestradiol contributed mostly to the water estradiol equivalent concentration (EEQ) (1.1-191 ng/L, average: 25 ng/L), while synthetic EDCs (17alpha-ethinylestradiol, diethylstilbestrol) were mainly responsible of the sediment EEQ (1.1-191 microg/kg, average: 71 microg/kg, d.w.). Whenever diethylstilbestrol was not recorded in the sediment, water EEQs were similar to sediment EEQs. A remarkable increase of nonylphenol was observed in sediments over the last decade.

Susceptibility to oxidative stress of mussels (Mytilus galloprovincialis) in the Venice Lagoon (Italy).

The aim of this study was to evaluate the susceptibility to pollutant mediated oxidative stress of the Mediterranean mussel Mytilus galloprovincialis in the Venice lagoon (Italy). In June 2003, mussels from a farm were transplanted to eight sites in the lagoon for five weeks. Oxidative stress responses were measured by: (i) total oxyradical scavenging capacity (TOSC) assay, for an overall evaluation of the oxidative stress response capability; (ii) catalase (CAT), as a key enzyme involved in the antioxidant defence system; (iii) malondialdehyde (MDA), as an indicator of lipid peroxidation, to evaluate an oxidative damage; (iv) metallothioneins (MTs), as they play a role in the antioxidant defence. The TOSC analysis revealed a reduced capability to eliminate: (i) peroxyl radical in mussels transplanted at Palude della Rosa, Valle Millecampi and Chioggia; (ii) hydroxyl radical at Campalto and Valle Millecampi; (iii) peroxynitrite at Valle Millecampi. Inhibition in CAT activity, observed in all the monitored sites, confirms the presence of an oxidative pressure in transplanted mussels. In addition, Pearson correlation analysis was performed in order to observe possible links between the various parameters. The PCA was a powerful tool to discriminate impacted sites, suggesting that the mussels transplanted throughout the Venice lagoon were subjected to different levels of oxidative pressure. Furthermore, it provided an easy and useful tool to summarize the obtained results.

Integrated use of biomarkers in the mussel Mytilus galloprovincialis for assessing off-shore gas platforms in the Adriatic Sea: results of a two-year biomonitoring program.

Despite a large number of gas platforms existing in the Adriatic Sea, which is a semi-enclosed basin characterized by a slow turnover rate and increasing industrial as well as other anthropogenic activities, the effects of these structures on the aquatic ecosystem require further investigation. Since 1998, multidisciplinary studies have been performed by CNR-ISMAR to comply with legislation and to support the development of protocols for the monitoring of offshore activities in the Adriatic Sea. The present study was developed to implement a biomonitoring plan to assess the ecotoxicological effects of the extraction activities of an off-shore gas platform. Biomarkers were evaluated in mussels collected from the platform in relation to physiological stress, DNA damage, cellular damage, oxidative stress and exposure effects. Organic contaminants and trace element bioaccumulation were also assessed in the soft body of the mussels to correlate bioaccumulation of pollutants with biomarker responses. The results indicate an absence of platform-related environmental stress.