Near-infrared excitation/emission microscopy with lanthanide-based nanoparticles.

Near-infrared optical imaging offers some advantages over conventional imaging, such as deeper tissue penetration, low or no autofluorescence, and reduced tissue scattering. Lanthanide-doped nanoparticles (LnNPs) have become a trend in the field of photoactive nanomaterials for optical imaging due to their unique optical features and because they can use NIR light as excitation and/or emission light. This review is focused on NaREF4 NPs and offers an overview of the state-of-the-art investigation in their use as luminophores in optical microscopy, time-resolved imaging, and super-resolution nanoscopy based on, or applied to, LnNPs. Secondly, whenever LnNPs are combined with other nanomaterial or nanoparticle to afford nanohybrids, the characterization of their physical and chemical properties is of current interest. In this context, the latest trends in optical microscopy and their future perspectives are discussed.

A Metal-Free, Nonconjugated Polymer for Solar Photocatalysis.

Heterogeneous catalysts that can absorb light over the solar range are ideal for green photocatalysis. Recently, attention has been directed towards the generation of novel solar-light photocatalysts, in particular, metal-free polymers. Herein, it is demonstrated that a metal-free, nonconjugated, anthraquinone-based copolymer (poly[1,4-diamine-9,10-dioxoanthracene-alt-(benzene-1,4-dioic acid)] (COP)) with a strong absorption in the visible region is effective as a sunlight heterogeneous photocatalyst. As a proof of concept, it has been used to mineralize 2,5-dichlorophenol (2,5-DCP) in water under air and sunlight irradiation. The photocatalytic efficiency of COP compares well with that of TiO2 -P25 when the reaction is carried out in a solar photoreactor in acid medium. Steady-state and time-resolved (absorption and emission) studies performed on COP suspended in 6:4 DMF/H2 O have provided valuable information about the COP species generated under different pH conditions. Steady-state absorption and fluorescence data are consistent with the existence of a tautomeric equilibrium between the 9,10-keto and 1,10-iminoketo quinoid forms for the anthraquinone in the ground state. Moreover, in basic media, transient absorption measurements showed the presence of two bands ascribed to the tautomeric triplet excited states, whereas only one of the triplets was observed in acid medium. A mechanism for the photocatalyzed degradation of 2,5-DCP by COP is proposed on the basis of these observations.

Photophysics of 7-mercapto-4-methylcoumarin and derivatives: complementary fluorescence behaviour to 7-hydroxycoumarins.

The photophysical behaviour of 7-mercapto-4-methylcoumarin (C-SH) and derivatives has been studied in different solvents. In contrast to 7-hydroxy-4-methylcoumarin, C-SH shows poor emission, but high fluorescence when the thiol is alkylated. The origin and character of the lowest singlet states are discussed, specifically proposing that the thione-like C[double bond, length as m-dash]S resonance form plays a key role in excited state deactivation in C-SH.

The Luminescence of CH3 NH3 PbBr3 Perovskite Nanoparticles Crests the Summit and Their Photostability under Wet Conditions is Enhanced.

CH3 NH3 PbBr3 perovskite nanoparticles (PAD ) are prepared with a photoluminescence quantum yield of ≈100% in air atmosphere by using the quasi-spherical shaped 2-adamantylammonium bromide (ADBr) as the only capping ligand. The photostability under wet conditions of this kind of nanoparticles is enhanced by using cucurbit[7]uril-adamantylammonium (AD@CB) host-guest complexes as the capping ligand.

Triggering the generation of an iron(IV)-oxo compound and its reactivity toward sulfides by Ru(II) photocatalysis.

The preparation of [Fe(IV)(O)(MePy2tacn)](2+) (2, MePy2tacn = N-methyl-N,N-bis(2-picolyl)-1,4,7-triazacyclononane) by reaction of [Fe(II)(MePy2tacn)(solvent)](2+) (1) and PhIO in CH3CN and its full characterization are described. This compound can also be prepared photochemically from its iron(II) precursor by irradiation at 447 nm in the presence of catalytic amounts of [Ru(II)(bpy)3](2+) as photosensitizer and a sacrificial electron acceptor (Na2S2O8). Remarkably, the rate of the reaction of the photochemically prepared compound 2 toward sulfides increases 150-fold under irradiation, and 2 is partially regenerated after the sulfide has been consumed; hence, the process can be repeated several times. The origin of this rate enhancement has been established by studying the reaction of chemically generated compound 2 with sulfides under different conditions, which demonstrated that both light and [Ru(II)(bpy)3](2+) are necessary for the observed increase in the reaction rate. A combination of nanosecond time-resolved absorption spectroscopy with laser pulse excitation and other mechanistic studies has led to the conclusion that an electron transfer mechanism is the most plausible explanation for the observed rate enhancement. According to this mechanism, the in-situ-generated [Ru(III)(bpy)3](3+) oxidizes the sulfide to form the corresponding radical cation, which is eventually oxidized by 2 to the corresponding sulfoxide.

Sensitive and selective plasmonic assay for spermine as biomarker in human urine.

A simple, fast, and highly selective and sensitive colorimetric assay to detect nanomolar levels of spermine in human urine (healthy donors, cancer patients) is reported. This assay is based on the absence of a competitive organic capping on the gold nanoparticles together with the high affinity of the amine groups of the analyte for the nanoparticle surface.

Raspberry-like Nanoheterostructures Comprising Glutathione-Capped Gold Nanoclusters Grown on the Lanthanide Nanoparticle Surface.

Bare lanthanide-doped nanoparticles (LnNPs), in particular, NaYF4:Yb3+,Tm3+ NPs (UCTm), have been seeded in situ with gold cations to be used in the subsequent growth of gold nanoclusters (AuNCs) in the presence of glutathione (GSH) to obtain a novel UCTm@AuNC nanoheterostructure (NHS) with a raspberry-like morphology. UCTm@AuNC displays unique optical properties (multiple absorption and emission wavelengths). Specifically, upon 350 nm excitation, it exhibits AuNC photoluminescence (PL) (500-1200 nm, λmax 650 nm) and Yb emission (λmax 980 nm); this is the first example of Yb sensitization in a UCTm@AuNC NHS. Moreover, under 980 nm excitation, it displays (i) upconverting PL of the UCTm (at the blue, red and NIR-I, ca. 800 nm, regions); (ii) two-photon PL of AuNC; and (iii) down-shifting PL of thulium (around 1470 nm). The occurrence of energy transfer from UCTm to AuNCs in the UCTm@AuNC NHS was evidenced by the drastic lengthening of the AuNC PL lifetime (τPL) (from few hundred nanoseconds to more than one hundred microseconds). Initial biological assessment of UCTm@AuNC NHSs in vitro revealed high biocompatibility and bioimaging capabilities upon near-infrared excitation.

In situ colorimetric quantification of silver cations in the presence of silver nanoparticles.

Silver ions (Ag(+)) can be quantified in situ in the presence of AgNPs by using a colorimetric sensing probe (3,3',5,5'-tetramethylbenzidine). Interestingly, it also enables detection of the Ag(+) adsorbed on the AgNP surface. This is relevant to design new methods to make AgNPs while ensuring the total reduction of Ag(+).

Orthogonal functionalisation of upconverting NaYF4 nanocrystals.

A simple and straightforward method for the orthogonal functionalisation of upconverting NaYF4 nanocrystals (UCNCs)-doped withYb(3+) and Er(3+)-based on N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide/N-hydroxysuccinimide (EDC/NHS) selective reactions between two dyes and two different reactive groups present at the periphery of the upconverting nanocrystals is reported. Organic-soluble UCNCs of 10 and 50 nm in size are encapsulated efficiently in a 1:1 mixture of two commercial 3000 Da poly(ethylene glycol) derivatives with two different reactive groups (amino and carboxylic groups). The water-dispersible UCNCs are non-cytotoxic, stable in the physiological environment, and present free amine and carboxylic reactive groups on their periphery, allowing rapid, selective, and modular covalent conjugation to payloads through EDC/NHS reactions. PEG-encapsulated UCNCs with and without covalent conjugation to payloads are characterised in vitro through spectroscopic, dynamic light scattering, and electron microscopy measurements. Living cell analyses coupled with TEM measurements confirm the uptake and low cytotoxicity of the coated UCNCs. They are linked covalently to two different dyes, internalised by living cells, and analysed by confocal microscopy. The related colocalisation measurements prove the reactivity of both amines and carboxylic acids on the periphery of the nanocrystals. This approach demonstrates that it is possible to produce water-dispersible and cyto-compatible dual-functional UCNCs.

Synergistic or antagonistic effect of lanthanides on Rose Bengal photophysics in upconversion nanohybrids?

A nanohybrid made of a xanthenic dye, rose bengal, grafted to an ytterbium and erbium codoped upconversion nanoparticle (UCNP) served as a proof-of-concept to evaluate the fundamental mechanisms which govern the dye photophysics upon interaction with the UCNP. Both photoactive lanthanides strongly influence the singlet and triplet excited states of rose bengal.

Ultraclean derivatized monodisperse gold nanoparticles through laser drop ablation customization of polymorph gold nanostructures.

We report a novel nanosecond laser ablation synthesis for spherical gold nanoparticles as small as 4 nm in only 5 s (532 nm, 0.66 J/cm(2)), where the desired protecting agent can be selected in a protocol that avoids repeated sample irradiation and undesired exposure of the capping agent during ablation. This method takes advantage of the recently developed synthesis of clean unprotected polymorph and polydisperse gold nanostructures using H(2)O(2) as a reducing agent. The laser drop technique provides a unique tool for delivering controlled laser doses to small drops that undergo assisted fall into a solution or suspension of the desired capping agent, yielding monodisperse custom-derivatized composite materials using a simple technique.

Unexpected solvent isotope effect on the triplet lifetime of methylene blue associated to cucurbit[7]uril.

Methylene blue shows an isotope dependent triplet lifetime that is 50% longer in D(2)O compared with H(2)O as a result of electronic-to-vibrational relaxation. The effect is enhanced when the dye is bound to curcubit[7]uril due to a combination of restricted mobility and a unfavorable vibrational coupling.

Initial Biological Assessment of Upconversion Nanohybrids.

Nanoparticles for medical use should be non-cytotoxic and free of bacterial contamination. Upconversion nanoparticles (UCNPs) coated with cucurbit[7]uril (CB[7]) made by combining UCNPs free of oleic acid, here termed bare UCNPs (UCn), and CB[7], i.e., UC@CB[7] nanohybrids, could be used as photoactive inorganic-organic hybrid scaffolds for biological applications. UCNPs, in general, are not considered to be highly toxic materials, but the release of fluorides and lanthanides upon their dissolution may cause cytotoxicity. To identify potential adverse effects of the nanoparticles, dehydrogenase activity of endothelial cells, exposed to various concentrations of the UCNPs, was determined. Data were verified by measuring lactate dehydrogenase release as the indicator of loss of plasma membrane integrity, which indicates necrotic cell death. This assay, in combination with calcein AM/Ethidium homodimer-1 staining, identified induction of apoptosis as main mode of cell death for both particles. The data showed that the UCNPs are not cytotoxic to endothelial cells, and the samples did not contain endotoxin contamination. Higher cytotoxicity, however, was seen in HeLa and RAW 264.7 cells. This may be explained by differences in lysosome content and particle uptake rate. Internalization of UCn and UC@CB[7] nanohybrids by cells was demonstrated by NIR laser scanning microscopy.

Correction: NIR laser scanning microscopy for photophysical characterization of upconversion nanoparticles and nanohybrids.

Correction for 'NIR laser scanning microscopy for photophysical characterization of upconversion nanoparticles and nanohybrids' by Juan Ferrera-González et al., Nanoscale, 2021, 13, 10067-10080, DOI: .

NIR laser scanning microscopy for photophysical characterization of upconversion nanoparticles and nanohybrids.

Photophysical characterization of upconversion nanoparticles (UCNPs) and nanohybrids (UCNHs) is more challenging than that of down-conversion nanomaterials. Moreover, it is still difficult to gain knowledge about the homogeneity of the sample and colocalization of emissive chromophores and nanoparticles in nanohybrids. Near infrared laser scanning microscopy (NIR-LSM) is a well-known and useful imaging technique, which enables excitation in the NIR region and has been extensively applied to optical fluorescence imaging of organic fluorophores and nanomaterials, such as quantum dots, which exhibit a short-lived emission. NIR-LSM has recently been used to determine the empirical emission lifetime of UCNPs, thus extending its application range to nanomaterials with a long lifetime emission. Here, we review our previous findings and include new measurements and samples to fully address the potential of this technique. NIR-LSM has proved to be extraordinarily useful not only for photophysical characterization of UCNHs consisting of UCNPs capped with a fluorophore to easily visualize the occurrence of the resonance energy transfer process between the UCNH constituents and their homogeneity, but also to assess the colocalization of the fluorophore and the UCNP in the UCNH; all this information can be acquired on the micro-/nano-meter scale by just taking one image.

Surface plasmons control the dynamics of excited triplet states in the presence of gold nanoparticles.

Aqueous gold nanoparticles (AuNPs) cause a large increase in the yield of methylene blue triplets ((3)MB*) obtained upon 650 nm laser excitation as a result of surface plasmon field interactions that can be described as transmitter-receiver antenna effects. Two distinct (3)MB* populations are observed; a fast decaying one (tau(T) approximately 25 ns) is believed to be due to molecules on the AuNP surface at the time of excitation and is described as static quenching. A longer lived (3)MB* population has lifetimes in the tens of microseconds but is subject to an anomalously high rate constant for a AuNP quenching of 6.4 x 10(13) M(-1) s(-1). This ultrafast quenching is attributed to a nonrandom distribution caused by the AuNP plasmon field that preferentially excites MB molecules located in the proximity of the AuNP where they are subject to antenna type interactions with the nanoparticle and are spatially predisposed for efficient quenching.

Stereoselective interaction of epimeric naproxen-RGD peptides with human serum albumin.

The dependence of the interaction between human serum albumin (HSA) and two epimeric bioconjugates, which contain (S)- or (R)-naproxen (NPX) bound to a cyclopentapeptide with an arginine-glycine-aspartate sequence (cRGD), on the absolute configuration of the naproxen moiety has been studied using several complementary experiments, such as direct physical separation of the unbound compound, fluorescence quenching of the protein, circular dichroism, and laser flash photolysis. The results were compared with those obtained with model compounds, such as (S)- and (R)-NPX, cRGD, and (S)- and (R)-NPX-NHBu amide analogues. Fluorescence quenching of Trp-214 in HSA by the naproxen compounds (NPXs) revealed lower efficiency for (S)-NPX-RGD in quenching the Trp emission as compared to (R)-NPX-cRGD. Laser flash photolysis data together with the association constants gave information about the distribution of each compound in site I and II, as well as about the lifetime of their triplet excited state within each site of HSA. Furthermore, docking modeling agreed with different modes of binding of the epimeric bioconjugates. Thus, although both bioconjugates bound preferentially to site I, only the NPX moiety of (R)-NPX-cRGD was located within the cavity, explaining its efficiency for Trp-214 fluorescence quenching.

Photophysical characterization of atorvastatin (Lipitor®) ortho-hydroxy metabolite: role of hydroxyl group on the drug photochemistry.

The influence of the phenolic hydroxyl group of ortho-hydroxy atorvastatin metabolite (Ato-OH) on the photochemistry of atorvastatin (Ato) has been evaluated by steady and time-resolved experiments. Direct excitation of Ato and Ato-OH led to phenanthrene-like intermediate formation, being ∼30% for Ato-OH less efficient than that for its parent compound in methanol. Both, Ato and Ato-OH are able to quench benzophenone (E(T)∼69 kcal mol(-1)) and xanthone (E(T)∼74 kcal mol(-1)) triplet excited state with rate constants close to diffusion limit control which suggest energy transfer mechanism is taking place. In fact, lower triplet energies ∼63 kcal mol(-1) and π,π* character, were confirmed by DFT calculations for both compounds. Interestingly, only Ato-OH can act as a hydrogen donor towards triplet benzil excited state (E(T)∼ 54 kcal mol(-1)) due to the presence of the phenolic hydroxyl group. Nevertheless, the presence of this group in Ato-OH does not modify to a significant degree the compound reactivity toward singlet oxygen. The importance of triplet energy transfer in biological systems to form Ato and Ato-OH triplet excited state as well as the hydrogen donor capacity of Ato-OH toward triplet excited state are discussed in the present communication.

On-off QD switch that memorizes past recovery from quenching by diazonium salts.

The understanding of the interaction of CdSe/ZnS semiconductor quantum dots (QD) with their chemical environment is fundamental, yet far from being fully understood. p-Methylphenyldiazonium tetrafluoroborate has been used to get some insight into the effect of diazonium salts on the spectroscopy of QD. Our study reveals that the surface of CdSe/ZnS quantum dots can be modified by diazonium salts (although not functionalized), showing and on-off fluorescence behaviour that memorizes past quenching recoveries. Facile modification of the surface confers protection against quenching by new molecules of diazonium salt and other known quenchers such as 4-amino-TEMPO. The reaction mechanism has been explored in detail by using different spectroscopic techniques. At the first time after addition of diazonium salt over QD the fluorescent is turned off with Stern-Volmer behaviour; the fluorescence recovers following irradiation. Subsequent additions of diazonium salts do not cause the same degree of quenching. We have noted that the third addition (following two cycles of addition and irradiation) is unable to quench the fluorescence. Monitoring the process using NMR techniques reveals the formation of p-difluoroborane toluene as a result of the irradiation of diazonium-treated QD; the treatment leads to the fluorination of the QD surface.

7-mercapto-4-methylcoumarin as a reporter of thiol binding to the CdSe quantum dot surface.

Interaction of 7-mercapto-4-methylcoumarin with the surface of core-shell CdSe-ZnS quantum dots leads to characteristic absorption and emission bands that are excellent reporters for thiol interactions at the nanoparticle surface.