RESUMO
A component of Salvia hispanica, α-linolenic acid, has been evaluated as a green corrosion inhibitor for 1018 carbon steel in 0.5 M sulfuric acid using weight loss tests, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) measurements. Theoretical calculations using Density Functional Theory (DFT) were used also. The results have shown that this compound is a good corrosion inhibitor, with an efficiency which increased with an increase in its concentration up to 600 ppm, but it decreased with a further increase in the concentration. α-linolenic acid formed protective corrosion products layer because it was chemically adsorbed onto the steel surface according to a Langmuir type of adsorption isotherms. Polarization curves have shown that α-linolenic acid is a good, mixed type of inhibitor with a predominant effect on the cathodic hydrogen evolution reactions. EIS measurements indicated a charge transfer-controlled corrosion process. DFT calculations indicated that α-linolenic acid was more efficient in an acidic environment than in a neutral one because has a high tendency to donate electrons and can be easily protonated. In addition to this, it had the highest EHUMO value, the best chemical reactivity, the greatest tendency to transfer electrons and a greater facility of modifying its electronic configuration in the presence of carbon steel specimens according to its chemical hardness value.
RESUMO
Medicago sativa (M. sativa) extract is a safe and eco-friendly corrosion inhibitor of 1018 steel in acid media. The inhibitor reached a maximum efficiency of 85% by using 500 ppm. In this work, we study the use of KI as an add-on to increase the inhibition efficiency of M. sativa, as well as making the natural inhibitor competitive with the commercial ones. We evaluated the effect of halide ions through the variation of different concentrations of KI and its synergy with the extract of M. sativa as a corrosion inhibitor of carbon steel in 0.5 M sulfuric acid and at different temperatures. The results were obtained through electrochemical techniques such as electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP) curves, and weight loss gravimetric technique. It was found that halide ions increase the inhibition efficiency of M. sativa from 85 to 95% when 5 mM concentration of KI was used. The efficiency of the inhibition increases proportionally with the immersion time but reduces when the temperature increases. The addition of iodide ions (I-) revealed that it exerts a synergistic effect on the inhibition of corrosion with the extract of M. sativa. However, when studying the metal surface using a scanning electron microscope, pitting corrosion was found.
RESUMO
A gemini surfactant imidazoline type, namely N-(3-(2-fatty-4,5-dihydro-1H-imidazol-1-yl) propyl) fatty amide, has been obtained from the fatty acids contained in the mango seed and used as a CO2 corrosion inhibitor for API X-120 pipeline steel. Employed techniques involved potentiodynamic polarization curves, linear polarization resistance, and electrochemical impedance spectroscopy. These tests were supported by detailed scanning electronic microscopy (SEM) and Raman spectroscopy studies. It was found that obtained gemini surfactant greatly decreases the steel corrosion rate by retarding both anodic and cathodic electrochemical reactions, with an efficiency that increases with an increase in its concentration. Gemini surfactant inhibits the corrosion of steel by the adsorption mechanism, and it is adsorbed on to the steel surface according to a Langmuir model in a chemical type of adsorption. SEM and Raman results shown the presence of the inhibitor on the steel surface.
RESUMO
In this study, the performance evaluation of lanthanum compounds as corrosion inhibitors of vanadium salts was performed. The inhibitors tested were lanthanum acetate and La2O3. The performance of the inhibitors was tested using sodium metavanadate (NaVO3) as a corrosive medium at 700, 800, and 900 °C. The corrosion inhibitory effect was evaluated on the corrosion process of 304H stainless steel. The corrosion rate of the steel was determined by the mass loss technique after 100 h of immersion in the corrosive salt with and without the addition of the corrosion inhibitor. The results show that lanthanum compounds act as corrosion inhibitors of vanadium salts. The inhibitory effect increases by increasing the concentration and tends to decrease when increasing the test temperature. Lanthanum compounds act as excellent corrosion inhibitors due to their ability to stabilize vanadium cations. Vanadium is stabilized by forming a new compound, lanthanum vanadate (LaVO4), with a melting point much higher than the compounds formed when Mg or Ni compounds are used as corrosion inhibitors.