Tuning the Diradical Character of Pentacene Derivatives via Non-Benzenoid Coupling Motifs.

The development of functional organic molecules requires structures of increasing size and complexity, which are typically obtained by the covalent coupling of smaller building blocks. Herein, with the aid of high-resolution scanning tunneling microscopy/spectroscopy and density functional theory, the coupling of a sterically demanded pentacene derivative on Au(111) into fused dimers connected by non-benzenoid rings was studied. The diradical character of the products was tuned according to the coupling section. In particular, the antiaromaticity of cyclobutadiene as the coupling motif and its position within the structure play a decisive role in shifting the natural orbital occupancies toward a stronger diradical electronic character. Understanding these structure-property relations is desirable not only for fundamental reasons but also for designing new complex and functional molecular structures.

Synthesis and Absorption Properties of Long Acenoacenes.

Acenes, polyaromatic hydrocarbons composed of linearly fused benzene rings have received immense attention due to their performance as semiconductors in organic optoelectronic applications. Their appealing physicochemical properties, such as extended delocalization, high charge carrier mobilities, narrow HOMO-LOMO gaps and partially radical character in the ground state make them very attractive targets for many potential applications. However, the intrinsic synthetic challenges of unsubstituted members such as high reactivity and poor solubility are still limiting factors for their wider exploitation. Herein, we report a simple general synthesis of a new family of angularly fused acenoacenes with improved stability compared to their isoelectronic linear counterparts. The synthesis and comprehensive characterization of pentacenopentacene, pentacenohexacene and hexacenohexacene, with lengths between decacene and dodecacene, are disclosed.

A Large Starphene Comprising Pentacene Branches.

Starphenes are attractive compounds due to their characteristic physicochemical properties that are inherited from acenes, making them interesting compounds for organic electronics and optics. However, the instability and low solubility of larger starphene homologs make their synthesis extremely challenging. Herein, we present a new strategy leading to pristine [16]starphene in preparative scale. Our approach is based on a synthesis of a carbonyl-protected starphene precursor that is thermally converted in a solid-state form to the neat [16]starphene, which is then characterised with a variety of analytical methods, such as 13 C CP-MAS NMR, TGA, MS MALDI, UV/Vis and FTIR spectroscopy. Furthermore, high-resolution STM experiments unambiguously confirm its expected structure and reveal a moderate electronic delocalisation between the pentacene arms. Nucleus-independent chemical shifts NICS(1) are also calculated to survey its aromatic character.

On-Surface Decarboxylation Coupling Facilitated by Lock-to-Unlock Variation of Molecules upon the Reaction.

On-surface synthesis (OSS) involving relatively high energy barriers remains challenging due to a typical dilemma: firm molecular anchor is required to prevent molecular desorption upon the reaction, whereas sufficient lateral mobility is crucial for subsequent coupling and assembly. By locking the molecular precursors on the substrate then unlocking them during the reaction, we present a strategy to address this challenge. High-yield synthesis based on well-defined decarboxylation, intermediate transition, and hexamerization is demonstrated, resulting in an extended and ordered network exclusively composed of the newly synthesized macrocyclic compound. Thanks to the steric hindrance of its maleimide group, we attain a preferential selection of the coupling. This work unlocks a promising path to enrich the reaction types and improve the coupling selectivity hence the structual homogeneity of the final product for OSS.

Subsurface-Carbon-Induced Local Charge of Copper for an On-Surface Displacement Reaction.

Transition-metal carbides have sparked unprecedented enthusiasm as high-performance catalysts in recent years. Still, the catalytic properties of copper carbide remain unexplored. By introducing subsurface carbon to Cu(111), a displacement reaction of a proton in a carboxyl acid group with a single Cu atom is demonstrated at the atomic scale and room temperature. Its occurrence is attributed to the C-doping-induced local charge of surface Cu atoms (up to +0.30 e/atom), which accelerates the rate of on-surface deprotonation via reduction of the corresponding energy barrier, thus enabling the instant displacement of a proton with a Cu atom when the molecules adsorb on the surface. This well-defined and robust Cuδ+ surface based on subsurface-carbon doping offers a novel catalytic platform for on-surface synthesis.

A Practical General Method for the Preparation of Long Acenes.

The field of long acenes, the narrowest of the zig-zag graphene nanoribbons, has been an area of significant interest in the past decade because of its potential applications in organic electronics, spintronics and plasmonics. However the low solubility and high reactivity of these compounds has so far hindered their preparation on large scales. We report here a concise strategy for the synthesis of higher acenes through Diels-Alder condensation of arynes with a protected tetraene ketone. After deprotection by cleavage of the ketal, the obtained monoketone precursors cleanly yield the corresponding acenes through quantitative cheletropic thermal decarbonylation in the solid state, at moderate temperatures of 155 to 205 °C. This approach allows the preparation of heptacene, benzo[a]hexacene, cis- and trans-dibenzopentacene and offers a valuable new method for the synthesis of even larger acenes.

Bicomponent Supramolecular Architectures at the Vacuum-Solid Interface.

This review aims at giving the readers the basic concepts needed to understand two-dimensional bimolecular organizations at the vacuum-solid interface. The first part describes and analyzes molecules-molecules and molecules-substrates interactions. The current limitations and needs in the understanding of these forces are also detailed. Then, a critical analysis of the past and recent advances in the field is presented by discussing most of the key papers describing bicomponents self-assembly on solid surface in an ultrahigh vacuum environment. These sections are organized by considering decreasing molecule-molecule interaction strengths (i.e. starting from strong directional multiple H bonds up to weaker nondirectional bonds taking into account the increasing fundamental role played by the surface). Finally, we conclude with some research directions (predicting self-assembly, multi-components systems, and nonmetallic surfaces) and potential applications (porous networks and organic surfaces).

Design and synthesis of aromatic molecules for probing electric fields at the nanoscale.

We propose using halogenated organic dyes as nanoprobes for electric fields and show their greatly enhanced Stark coefficients using density functional theory (DFT) calculations. We analyse halogenated variants of three molecules that have been of interest for cryogenic single molecule spectroscopy: perylene, terrylene, and dibenzoterrylene, with the zero-phonon optical transitions at blue, red, and near-infrared. Out of all the combinations of halides and binding sites that are calculated, we have found that fluorination of the optimum binding site induces a dipole difference between the ground and excited states larger than 0.5 D for all three molecules with the highest value of 0.69 D for fluoroperylene. We also report on the synthesis of 3-fluoroterrylene and the bulk spectroscopy of this compound in liquid and solid organic environments.

Maleimides Designed for Self-Assembly and Reactivity on Graphene.

Two new maleimide derivatives have been synthesized, prone to self-assemble and react with graphene as dienophiles. Both compounds bear a long alkyl chain on the carbon-carbon double bond position 3. The maleimide 1 bears a second alkyl chain at the nitrogen, while in compound 2, three maleimide functionalities are linked to a triethynylbenzene core.

Substrate templating guides the photoinduced reaction of C60 on calcite.

A substrate-guided photochemical reaction of C60 fullerenes on calcite, a bulk insulator, investigated by non-contact atomic force microscopy is presented. The success of the covalent linkage is evident from a shortening of the intermolecular distances, which is clearly expressed by the disappearance of the moiré pattern. Furthermore, UV/Vis spectroscopy and mass spectrometry measurements carried out on thick films demonstrate the ability of our setup for initiating the photoinduced reaction. The irradiation of C60 results in well-oriented covalently linked domains. The orientation of these domains is dictated by the lattice dimensions of the underlying calcite substrate. Using the lattice mismatch to deliberately steer the direction of the chemical reaction is expected to constitute a general design principle for on-surface synthesis. This work thus provides a strategy for controlled fabrication of oriented, covalent networks on bulk insulators.

ß-Disubstituted Pentacene Derivatives: Thin Film Structural Properties and Four-Probe Field Effect Mobility.

2,9- and 2,10-diphenylpentacene were synthesized by direct C-H borylation of ketal-protected pentacene, followed by halodeboronation, resolution of the dihalo isomers, Suzuki arylation, cleavage of the ketals and decarbonylation in the solid state. They were studied as main active components in organic field effect transistors (OFETs). Diphenyl substitution of pentacene affects the unit cell dimensions only slightly, preserving a face to edge molecular packing in the first layers of thin films evaporated on SiO2 substrates. Both isomers self-assemble into nanoribbons during the thin film growth upon vapor deposition. The similarity between the surface induced phases of the 2,9-isomer and unsubstituted pentacene leads to similar 4-probe hole mobilities, i. e. 0.13 cm2 V-1 s-1 for the former. Whereas 2,9-disubstitution thus does essentially preserve the thin film characteristics of unsubstituted pentacene, 2,10-disubstitution is detrimental to the molecular ordering in the thin films and therefore to the field effect mobility which is only 0.07 cm2 V-1 s-1. The known strong enhancement of field effect mobility observed upon diphenyl substitution of anthracene can thus not be emulated analogously with pentacene.

Extending on-surface synthesis from 2D to 3D by cycloaddition with C60.

As an efficient molecular engineering approach, on-surface synthesis (OSS) defines a special opportunity to investigate intermolecular coupling at the sub-molecular level and has delivered many appealing polymers. So far, all OSS is based on the lateral covalent bonding of molecular precursors within a single molecular layer; extending OSS from two to three dimensions is yet to be realized. Herein, we address this challenge by cycloaddition between C60 and an aromatic compound. The C60 layer is assembled on the well-defined molecular network, allowing appropriate molecular orbital hybridization. Upon thermal activation, covalent coupling perpendicular to the surface via [4 + 2] cycloaddition between C60 and the phenyl ring of the molecule is realized; the resultant adduct shows frozen orientation and distinct sub-molecular feature at room temperature and further enables lateral covalent bonding via [2 + 2] cycloaddition. This work unlocks an unconventional route for bottom-up precise synthesis of three-dimensional covalently-bonded organic architectures/devices on surfaces.

Preparative-scale synthesis of nonacene.

During the last years we have witnessed progressive evolution of preparation of acenes with length up to dodecacene by on-surface synthesis in ultra-high vacuum or generation of acenes up to decacene in solid matrices at low temperatures. While these protocols with very specific conditions produce the acenes in amount of few molecules, the strategies leading to the acenes in large quantities dawdle behind. Only recently and after 70 years of synthetic attempts, heptacene has been prepared in bulk phase. However, the preparative scale synthesis of higher homologues still remains a formidable challenge. Here we report the preparation and characterisation of nonacene and show its excellent thermal and in-time stability.

Covalent networks through on-surface chemistry in ultra-high vacuum: state-of-the-art and recent developments.

The fabrication of large molecular devices, directly on surfaces in UHV conditions, by covalent coupling of smaller precursors has become in the past years an attractive solution for Molecular Electronics. This review presents the state-of-the-art and an analysis of the potential of this new field, from Ullmann type C-C coupling, cyclodehydrogenation, and reactions involving heteroelements to 2D polymerisation on insulating thin films. Mechanistic insights are also mentioned, giving preliminary explanations on the influence of the substrate and the 2D confinement. Potential perspectives for further developments are then evoked.

Adsorption of organic molecules on the TiO2(011) surface: STM study.

High resolution scanning tunneling microscopy has been applied to investigate adsorption and self-assembly of large organic molecules on the TiO(2)(011) surface. The (011) face of the rutile titania has been rarely examined in this context. With respect to possible industrial applications of rutile, quite often in a powder form, knowledge on behavior of organic molecules on that face is required. In the presented study we fill in the gap and report on experiments focused on the self-assembly of organic nanostructures on the TiO(2)(011) surface. We use three different kinds of organic molecules of potential interest in various applications, namely, PTCDA and CuPc representing flat, planar stacking species, and Violet Landers specially designed for new applications in molecular electronics. In order to reach a complete picture of molecular behavior, extended studies with different surface coverage ranging from single molecule up to 2 monolayer (ML) thick films are performed. Our results show that the adsorption behavior is significantly different from previously observed for widely used metallic templates. Creation of highly ordered molecular lines, quasi-ordered wetting layers, controlled geometrical reorientation upon thermal treatment, existence of specific adsorption geometries, and prospects for tip-induced molecule ordering and manipulation provide better understanding and add new phenomena to the knowledge on the (011) face of rutile titania.

Preparation of Tetrabenzo[4.4.2]undecastarphene by On-Surface Synthesis.

A large dissymmetric starphene molecule, the tetrabenzo[a,c,u,w]naphtho[2,3-l]nonaphene, was obtained by first preparing a soluble precursor which was then sublimated on a Au(111) surface in an ultra-high vacuum. In a second step, controlled annealings from 200 °C to 275 °C initiated two successive cyclodehydrogenation steps with the formation of 3 new carbon-carbon bonds. A second conformer was also stable enough during the annealing step to give another compound in similar yield, the benzodibenzo[7,8,9,10]naphthaceno[2,1-h]phenanthro[9,10-p]hexaphene. The formation of this more-hindered species stresses the importance of strong molecule-surface interactions during the cyclodehydrogenations steps of these large polyaromatic hydrocarbons.

On-Surface Synthesis with Atomic Hydrogen.

Surface-assisted synthesis has become a powerful approach for generation of molecular nanostructures, which could not be obtained via traditional solution chemistry. Nowadays there is an intensive search for reactions that could proceed on flat surfaces in order to boost the versatility and applicability of synthesized nano-objects. Here we propose application of atomic hydrogen combined with on-surface synthesis in order to tune the reaction pathways. We demonstrate that atomic hydrogen could be widely applied: (1) as a cleaning tool, which allows removal of halogen residues from the surface after Ullmann couplings/polymerization, (2) by reaction with surface organometallics to provide stable hydrogenated species, and (3) as a reagent for debromination or desulfurization of adsorbed species.

On-Surface Synthesis of Chlorinated Narrow Graphene Nanoribbon Organometallic Hybrids.

Graphene nanoribbons (GNRs) and their derivatives attract growing attention due to their excellent electronic and magnetic properties as well as the fine-tuning of such properties that can be obtained by heteroatom substitution and/or edge morphology modification. Here, we introduce graphene nanoribbon derivatives-organometallic hybrids with gold atoms incorporated between the carbon skeleton and side Cl atoms. We show that narrow chlorinated 5-AGNROHs (armchair graphene nanoribbon organometallic hybrids) can be fabricated by on-surface polymerization with omission of the cyclodehydrogenation reaction by a proper choice of tailored molecular precursors. Finally, we describe a route to exchange chlorine atoms connected through gold atoms to the carbon skeleton by hydrogen atom treatment. This is achieved directly on the surface, resulting in perfect unsubstituted hydrogen-terminated GNRs. This will be beneficial in the molecule on-surface processing when the preparation of final unsubstituted hydrocarbon structure is desired.

Long-range ordered and atomic-scale control of graphene hybridization by photocycloaddition.

Chemical reactions that convert sp2 to sp3 hybridization have been demonstrated to be a fascinating yet challenging route to functionalize graphene. So far it has not been possible to precisely control the reaction sites nor their lateral order at the atomic/molecular scale. The application prospects have been limited for reactions that require long soaking, heating, electric pulses or probe-tip press. Here we demonstrate a spatially selective photocycloaddition reaction of a two-dimensional molecular network with defect-free basal plane of single-layer graphene. Directly visualized at the submolecular level, the cycloaddition is triggered by ultraviolet irradiation in ultrahigh vacuum, requiring no aid of the graphene Moiré pattern. The reaction involves both [2+2] and [2+4] cycloadditions, with the reaction sites aligned into a two-dimensional extended and well-ordered array, inducing a bandgap for the reacted graphene layer. This work provides a solid base for designing and engineering graphene-based optoelectronic and microelectronic devices.