The Role of the Fascia-Only Anterolateral Thigh Flap in Extremity Reconstruction: The Fascia-Only Anterolateral Thigh Flap.

BACKGROUND: Free flap selection in extremity reconstruction can be challenging. The ideal flap has to be thin and pliable to achieve optimal contour and function. We explore the role of the fascia-only anterolateral thigh (fALT) flap in extremity reconstruction. METHODS: We conducted a retrospective review of our experience using fALT-free flap for extremity reconstruction over a 2-year period. Patient demographics, mechanism of injury, flap characteristics, complications- and follow-up were recorded. Descriptive statistics were calculated. RESULTS: Twelve patients were included. The median (interquartile range [IQR]) age was 34 (28-52) years. One fALT flap was used for upper extremity reconstruction, while 11 flaps were used for lower extremity reconstruction (4 for lower third of the leg, 4 for dorsum of foot, and 3 for heel). The median (IQR) flap surface area was 90 (63-120) cm2 and time from injury to reconstruction was 10 (6-16) days. The postoperative course was uneventful for all flaps except for 1 flap failure and 1 delayed healing. The median (IQR) follow-up was 2 (1-4) months. In all cases, durable soft tissue reconstruction was achieved with no need for revisions. CONCLUSIONS: The fALT-free flap can be successfully used in extremity reconstruction. The ALT fascia has robust perfusion that allows for the harvest of a large flap that can be surfaced with a split thickness skin graft. Its thin pliable tissue provides excellent contour for the hand, distal leg, and foot that does not require future thinning, optimizing the cosmetic and functional result.

Traumatic Brain Injury and Its Association With Orbital Fracture Characteristics and Repair.

Traumatic brain injury (TBI) is common in up to 50% of patients with facial fractures. Orbital fractures account for 25% of all facial fractures. The authors sought to determine the prevalence and risk factors for TBI in patients undergoing orbital fracture repair (OFR) and assess the impact of TBI on surgical timing. A retrospective review of trauma patients who underwent OFR at a single trauma center from 2015 to 2020 was conducted. Excluded were patients <18 years old and those with unreported GCS on presentation. TBI was defined as GCS <15 or any neurological symptom on presentation. TBI was categorized into mild (GCS=14-15), moderate (GCS=9-13), and severe TBI (GCS=3-8). Our primary and secondary outcomes were the prevalence of TBI on presentation and duration from injury to surgery, respectively. Of the 200 patients analyzed, 99 (49.5%) had concomitant TBI on presentation. The most common neurological symptom on presentation was loss of consciousness [n=80 (40%)]. Patients with TBI were significantly more likely to have an orbital roof [n=11 (11.1%), n=4 (4.0%), P=0.048] and lateral wall fractures [n=25 (25.3%), n=14 (13.9%), P=0.031] compared with patients without TBI. Patients with severe TBI were more likely to have delayed OFR-a significantly greater proportion of patients who had severe TBI had OFR after 60 days of injury compared with those without TBI or with mild TBI [5 (39%), 12 (12%), 4 (5%), P=0.032]. Craniofacial surgeons must suspect and screen for TBI in patients presenting with facial trauma, especially those with orbital roof and lateral wall fractures.

Patient-Specific Implant Customization for Treatment of Internal Orbital Fractures Using Office-Based Three-Dimensional Printing.

OBJECTIVE: Three-dimensional (3D) modeling technology aids the reconstructive surgeon in designing and tailoring individualized implants for the reconstruction of complex craniofacial fractures. Three-dimensional modeling and printing have traditionally been outsourced to commercial vendors but can now be incorporated into both private and academic craniomaxillofacial practices. The goal of this report is to present a low-cost, standardized office-based workflow for restoring bony orbital volume in traumatic orbital fractures. METHODS: Patients with internal orbital fractures requiring open repair were identified. After the virtual 3D models were created by iPlan 3.0 Cranial CMF software (Brainlab), the models were printed using an office-based 3D printer to shape and modify orbital plates to correctly fit the fracture defect. The accuracy of the anatomic reduction and the restored bony orbital volume measurements were determined using postoperative computed tomography images and iPlan software. RESULTS: Nine patients fulfilled the inclusion criteria: 8 patients had unilateral fractures and 1 patient had bilateral fractures. Average image processing and print time were 1.5 hours and 3 hours, respectively. The cost of the 3D printer was $2500 and the average material cost to print a single orbital model was $2. When compared with the uninjured side, the mean preoperative orbital volume increase and percent difference were 2.7 ± 1.3 mL and 10.9 ± 5.3%, respectively. Postoperative absolute volume and percent volume difference between the orbits were -0.2 ± 0.4 mL and -0.8 ± 1.7%, respectively. CONCLUSIONS: Office-based 3D printing can be routinely used in the repair of internal orbital fractures in an efficient and cost-effective manner to design the implant with satisfactory patient outcomes.

The Association Between Craniofacial Fracture Patterns and Traumatic Optic Neuropathy.

Traumatic optic neuropathy (TON) is a rare but potentially devastating complication of craniofacial trauma. Approximately half of patients with TON sustain permanent vision loss. In this study, we sought to identify the most common fracture patterns associated with TON. We performed a retrospective review of craniomaxillofacial CT scans of trauma patients who presented to the R Adams Cowley Shock Trauma Center from 2015 to 2017. Included were adult patients who had orbital fractures with or without other facial fractures. Patients diagnosed with TON by a formal ophthalmologic examination were analyzed. Craniofacial fracture patterns were identified. Bivariate analysis and multivariate logistic regression were performed to identify craniofacial fracture patterns most commonly associated with TON. A total of 574 patients with orbital fractures who met inclusion criteria [15 (2.6%)] were diagnosed with TON. The median [interquartile range (IQR)] age was 44 (28-59) years. Patients with optic canal fractures and sphenoid sinus fractures had greater odds of TON compared with patients who did not have these fracture types [adjusted odds ratio (aOR) 95% confidence interval (CI) 31.8 (2.6->100), 8.1 (2.7-24.4), respectively]. Patients who sustain optic canal and sphenoid sinus fractures in the setting of blunt facial trauma are at increased odds of having a TON. Surgeons and other physicians involved in the care of these patients should be aware of this association.

Subchronic oral exposure of tungsten induces myofibroblast transformation and various markers of kidney fibrosis.

Tungsten is a naturally occurring transition element used in a broad range of applications. As a result of its extensive use, we are increasingly exposed to tungsten from our environment, including potable water, since tungsten can become bioaccessible in ground sources. The kidneys are particularly susceptible to tungsten exposure as this is the main site for tungsten excretion. In this study, we investigated the prolonged effects of tungsten on the kidneys and how this may impact injury and function. When mice were exposed to tungsten in their drinking water for 1 mo, kidney function had not significantly changed. Following 3-mo exposure, mice were presented with deterioration in kidney function as determined by serum and urine creatinine levels. During 3 mo of tungsten exposure, murine kidneys demonstrated significant increases in the myofibroblast marker α-smooth muscle actin (αSMA) and extracellular matrix products: fibronectin, collagen, and matricellular proteins. In addition, Masson's trichrome and hematoxylin-eosin (H&E) staining revealed an increase in fibrotic tissue and vacuolization of tubular epithelial cells, respectively, from kidneys of tungsten-treated mice, indicative of renal injury. In vitro treatment of kidney fibroblasts with tungsten led to increased proliferation and upregulation of transforming growth factor ß1 (TGFß1), which was consistent with the appearance of fibroblast-to-myofibroblast transition (FMT) markers. Our data suggest that continuous exposure to tungsten impairs kidney function that may lead to the development of chronic kidney disease (CKD).

Integrated Plastic Surgery Residency Applicant Perceptions of Virtual Interviews.

PURPOSE: The 2020-2021 interview cycle for integrated plastic surgery applicants was the first to be held virtually because of the COVID-19 pandemic. Here, we detail the largest study on integrated plastic surgery applicant perceptions after the virtual interview cycle. METHODS: A 35-question institutional review board-approved survey was distributed to medical students who had applied to the Johns Hopkins/University of Maryland or University of California San Diego integrated residency programs during the 2020-2021 interview cycle. Survey questions assessed the structure, strengths, and weaknesses of the exclusively virtual interview process. Survey administration and data collection were performed using the Qualtrics platform. RESULTS: Of 318 distributed surveys, 94 were completed. In addition, 91.5% of respondents preferred in-person interviews before the interview season, whereas 54.3% preferred in-person interviews afterward. Applicants who favored virtual interviews did not view being unable to physically meet with program staff as a detriment (P = .001) and felt they could effectively advocate for themselves (P = .002). Overall, the most cited strengths were the ability to complete more interviews (P = .01) and cost benefits (P = .02). Criticisms were directed at the impersonal nature of the exchange (86.2%), lack of physical tour (56.4%), and difficulties at self-advocacy (52.1%). CONCLUSION: Preference for virtual interviews increased from 7.5% to 34.0% after the virtual interview cycle. For several students, the ideal interview structure permits both in-person and virtual interviews to maximize flexibility. Augmenting with virtual city tours and one-on-one interviews may mitigate the impersonal nature of virtual interviews as perceived by some applicants.

Blunt Cerebrovascular Injury-Like Injury Observed in Patients With Craniofacial Self-Inflicted Gunshot Wounds.

BACKGROUND: Although blunt cerebrovascular injury (BCVI) is recognized as a risk factor for trauma morbidity and mortality, little is described regarding similar cerebrovascular injury (CVI) in patients with penetrating wounds. The authors aim to characterize these injuries in the craniofacial self-inflicted gunshot wound (SIGSW) population. METHODS: An institutional review board (IRB)-approved retrospective nstudy was conducted on patients presenting to the R Adams Cowley Shock Trauma Center with SIGSWs between 2007 and 2016. All CVIs were categorized by location, type, and associated neurologic deficits. Demographic data, patient characteristics, additional studies, and long-term outcomes were collected. A multivariate analysis determining independent predictors of CVI in the SIGSW population was performed. RESULTS: Of the 73 patients with SIGSWs, 5 (6.8%) had CVIs separate from the bullet/cavitation tract (distant CVIs) and 9 had CVIs along the bullet/cavitation tract (in-tract CVIs). A total of 55.6% of in-tract and 40% of distant injuries were missed on initial radiology read. One distant CVI patient suffered a stroke during admission. The anterior to posterior gunshot wound trajectory was positively associated with distant CVIs when compared with no CVIs ( P  = 0.01). Vessel dissection was more prevalent in patients with distant CVIs, when compared against patients with in-tract CVIs ( P  = 0.02). CONCLUSIONS: Nearly 20% of craniofacial SIGSW patients have CVIs and 6.8% have BCVI-like injuries, which is 2-to-6-fold times higher than traditional BCVIs. Craniofacial SIGSWs serve as an independent screening criterion with comparable screening yields; the authors recommend radiographic screening for these patients with particular scrutiny for CVIs as they are frequently missed on initial radiographic interpretations.

Many Moving Pieces: Virtual Preoperative Surgical Planning for Traumatic Occlusal Splints.

INTRODUCTION: Achieving anatomic reduction and re-establishing premorbid occlusion in patients with complex maxillomandibular fractures is challenging even for seasoned surgeons. Historically, surgeons have utilized occlusal splints to help establish occlusal relationships before fracture reduction and fixation. These acrylic splints are fabricated from dental impressions and require manual repositioning of tooth bearing segments along the fracture line to reapproximate premorbid occlusion. The process is laborious, requires a dental lab, and is less efficacious in edentulous patients or those with significantly comminuted fractures; as such it has largely fallen out of practice. Recently, with advances in virtual 3D modeling and printing, we demonstrate that occlusal splints can be designed from computed tomography scans, manipulated virtually, and printed without obtaining impressions from the patient. METHODS/RESULTS: In our series of 3 patients with complex maxillomandibular fractures, occlusal splints were created by 1) obtaining maxillofacial computed tomography scans, 2) reducing the fractures virtually, and 3) using orthognathic virtual surgery software to create the splint. The time between planning and delivery of the splint was 4 to 7 days. These splints were successfully utilized to help establish premorbid occlusion in conjunction with maxillomandibular fixation and aided in expeditious intraoperative fracture reduction and fixation. CONCLUSIONS: In the treatment of complex facial fractures, occlusal splints can be a useful adjunct in the operative reduction and fixation of fractures. With the advent of virtual preoperative surgical planning via 3D modeling and 3D printing, these occlusal splints can be created of a sufficient fidelity to avoid the strict need for dental impressions.

Craniofacial Fellowship Applicant Perceptions of Virtual Interviews.

INTRODUCTION: The 2021 interview cycle for craniofacial fellowship applicants was the first to be held virtually due to the coronavirus disease 2019 pandemic. Here, we detail the craniofacial fellowship applicant perceptions and experience on the virtual interview process. MATERIALS AND METHODS: An institutional review board-approved 35-question survey study on the perception of the virtual interview process among craniofacial fellowship applicants was conducted. Surveys were distributed to individuals who had applied through the match, overseen by the American Society of Craniofacial Surgeons (ASCFS). RESULTS: Ten surveys were fully completed with a corresponding response rate of 48%. The average number of interviews completed was 12.7±7.7 and 50% of applicants interviewed at >1 program in a single day. Overall, 90% of respondents preferred in-person interviews before the interview season, however, only 10% preferred the in-person format afterwards. Preference for a virtual-only format increased from 10% to 70%. Applicants cited cost (100%), ease of scheduling (90%), and ability to participate in more interviews (70%) as the primary strengths of the virtual platform; none reported difficulties with self-advocacy. After the interview cycle, 90% stated they would recommend virtual interviews. CONCLUSIONS: The greatest strengths of virtual interviews were the ability to participate in more interviews, the ease of scheduling, and the cost benefits. Most applicants reported the same or increased ability for self-advocacy with virtual interviews. Following the index interview cycle for 2021, the majority of fellowship applicants now appear to prefer a virtual-only or hybrid format and would recommend virtual interviews in the future.

Gaseous and Particulate Content of Laser Tattoo Removal Plume.

BACKGROUND: There is increasing awareness of the potential hazards of surgical plumes. The plume associated with laser tattoo removal remains uncharacterized. OBJECTIVE: To determine the gaseous, particulate, and microbiological content of the laser tattoo removal plume. MATERIALS AND METHODS: Air sampling was performed during laser tattoo removal from pig skin and from patients. Measurement of metals, volatile organic compounds (VOCs), carbon monoxide (CO), hydrogen sulfide (HS), and ultrafine particulates (UPs) as well as bacterial 16S ribosomal DNA sequencing were performed. RESULTS: Metals were identified in the plume from both pig and human skin. Volatile organic compounds were found at similar levels within and outside the treatment room. Several bacterial phyla were detected in the treatment room, but not outside. High levels of UPs were measured throughout the treatment room during tattoo removal from pig skin. Ultrafine particulates were detected at low levels in the room periphery during tattoo removal from human skin, but at higher levels in the immediate treatment zone. HS and CO were not detected. CONCLUSION: Metals, VOCs, HS, and CO were found at levels below applicable occupational exposure limits. The presence of bacteria is of uncertain significance, but may be hazardous. High levels of UPs require further investigation.

COVID-19 Outbreak Among Employees at a Meat Processing Facility - South Dakota, March-April 2020.

On March 24, 2020, the South Dakota Department of Health (SDDOH) was notified of a case of coronavirus disease 2019 (COVID-19) in an employee at a meat processing facility (facility A) and initiated an investigation to isolate the employee and identify and quarantine contacts. On April 2, when 19 cases had been confirmed among facility A employees, enhanced testing for SARS-CoV-2, the virus that causes COVID-19, was implemented, so that any employee with a COVID-19-compatible sign or symptom (e.g., fever, cough, or shortness of breath) could receive a test from a local health care facility. By April 11, 369 COVID-19 cases had been confirmed among facility A employees; on April 12, facility A began a phased closure* and did not reopen during the period of investigation (March 16-April 25, 2020). At the request of SDDOH, a CDC team arrived on April 15 to assist with the investigation. During March 16-April 25, a total of 929 (25.6%) laboratory-confirmed COVID-19 cases were diagnosed among 3,635 facility A employees. At the outbreak's peak, an average of 67 cases per day occurred. An additional 210 (8.7%) cases were identified among 2,403 contacts of employees with diagnosed COVID-19. Overall, 48 COVID-19 patients were hospitalized, including 39 employees and nine contacts. Two employees died; no contacts died. Attack rates were highest among department-groups where employees tended to work in proximity (i.e., <6 feet [2 meters]) to one another on the production line. Cases among employees and their contacts declined to approximately 10 per day within 7 days of facility closure. SARS-CoV-2 can spread rapidly in meat processing facilities because of the close proximity of workstations and prolonged contact between employees (1,2). Facilities can reduce this risk by implementing a robust mitigation program, including engineering and administrative controls, consistent with published guidelines (1).

COVID-19 Among Workers in Meat and Poultry Processing Facilities - 19 States, April 2020.

Congregate work and residential locations are at increased risk for infectious disease transmission including respiratory illness outbreaks. SARS-CoV-2, the virus that causes coronavirus disease 2019 (COVID-19), is primarily spread person to person through respiratory droplets. Nationwide, the meat and poultry processing industry, an essential component of the U.S. food infrastructure, employs approximately 500,000 persons, many of whom work in proximity to other workers (1). Because of reports of initial cases of COVID-19, in some meat processing facilities, states were asked to provide aggregated data concerning the number of meat and poultry processing facilities affected by COVID-19 and the number of workers with COVID-19 in these facilities, including COVID-19-related deaths. Qualitative data gathered by CDC during on-site and remote assessments were analyzed and summarized. During April 9-27, aggregate data on COVID-19 cases among 115 meat or poultry processing facilities in 19 states were reported to CDC. Among these facilities, COVID-19 was diagnosed in 4,913 (approximately 3%) workers, and 20 COVID-19-related deaths were reported. Facility barriers to effective prevention and control of COVID-19 included difficulty distancing workers at least 6 feet (2 meters) from one another (2) and in implementing COVID-19-specific disinfection guidelines.* Among workers, socioeconomic challenges might contribute to working while feeling ill, particularly if there are management practices such as bonuses that incentivize attendance. Methods to decrease transmission within the facility include worker symptom screening programs, policies to discourage working while experiencing symptoms compatible with COVID-19, and social distancing by workers. Source control measures (e.g., the use of cloth face covers) as well as increased disinfection of high-touch surfaces are also important means of preventing SARS-CoV-2 exposure. Mitigation efforts to reduce transmission in the community should also be considered. Many of these measures might also reduce asymptomatic and presymptomatic transmission (3). Implementation of these public health strategies will help protect workers from COVID-19 in this industry and assist in preserving the critical meat and poultry production infrastructure (4).

Orbital Injuries From Self-Inflicted Gunshots: Patterns, Management, and Visual Outcomes.

PURPOSE: Self-inflicted facial gunshots (SIGSWs) typically result in a spectrum of severe injuries to facial structures, including the orbit and globe. Roughly three-quarters of those who arrive to the hospital will survive their injuries, and recidivism is typically low. Therefore, effective management is paramount to preserve vision, and long-term quality of life. The objective of this study is to characterize the common injuries to the orbit, globe, and periocular structures following SIGSWs, their management, and their eventual visual and reconstructive outcomes. METHODS: Retrospective review of trauma registry records at a Level 1 trauma center for patients who presented alive following SIGSWs involving the globe and/or orbit from 2007 to 2016. RESULTS: Of the 47 patients who presented with SIGSWs to the orbit, 33 (70%) were discharged alive from the hospital. Management strategies for these patients fell into 3 groups, based on the involved structures: i) Open globe injuries (Type I: n = 12, 34%) ii) Orbital fractures with preserved globe and optic nerve (Type II: n = 15, 43%), and iii) Optic nerve injuries with preserved globe (Type III: n = 8, 23%). Compared with Type II and III injuries, patients who had Type I injuries were more likely to die prior to hospital discharge (46% vs. 20% vs. 12%, p = 0.04), undergo ophthalmologic intervention (73% vs. 6% vs. 11%, p = 0.01), and more surgery (6 vs. 3 vs. 0.5 mean surgeries, p < 0.001). Type II injuries most frequently underwent debridement and reconstruction of the bony orbit. Type III and Type I injuries were associated with worse initial and final visual acuity, with the majority (100% and 75%, respectively) having No Light Perception (NLP) on initial exam, and no visual recovery during the follow-up period (median follow up= 25 months). CONCLUSIONS: Management and visual outcomes of orbital injuries from SIGSWs is determined by whether the globe and optic nerve are preserved. Open globe injury by itself is associated with higher mortality and significant permanent vision loss.

The Prevalence of Blood-Borne Pathogens in Maxillofacial Trauma Patients.

BACKGROUND: Blood-borne pathogen infections (BPIs), caused by the human immunodeficiency virus, hepatitis C and hepatitis B viruses pose an occupational hazard to healthcare workers. Facial trauma reconstruction surgeons may be at elevated risk because of routine use of sharps, and a higher than average incidence of BPIs in the trauma patient population. METHODS: The authors retrospectively reviewed health records of patients admitted to a level 1 trauma center with a facial fracture between January 2010 and December 2015. Patient demographics, medical history, mechanism of injury, type of fracture, and procedures performed were documented. The authors detemined the frequency of human immunodeficiency virus, hepatitis B, and hepatitis C diagnosis and utilized univariable/multivariable analyses to identify risk factors associated with infection in this population. RESULTS: In total, 4608 consecutive patients were included. Infections were found in 4.8% (n = 219) of patients (human immunodeficiency virus 1.6%, hepatitis C 3.3%, hepatitis B 0.8%). 76.3% of BPI patients in this cohort were identified by medical history, while 23.7% were diagnosed by serology following initiation of care. 39.0% of all patients received surgical treatment during initial hospitalization, of whom 4.3% had a diagnosed BPI. History of intravenous drug use (odds ratio [OR] 6.79, P < 0.001), assault-related injury (OR 1.61, P = 0.003), positive toxicology screen (OR 1.56, P = 0.004), and male gender (OR 1.53, P = 0.037) were significantly associated with a BPI diagnosis. CONCLUSION: Patients presenting with facial fractures commonly harbor a BPI. The benefit of early diagnosis and risk to surgical staff may justify routine screening for BPI in high risk facial trauma patients (male, assault-related injury, and history of intravenous drug use).

Differences in Facial Fracture Patterns in Pediatric Nonaccidental Trauma.

BACKGROUND: The purpose of this study was to characterize differences in facial fracture injury patterns among pediatric patients at highest risk of abusive head trauma/nonaccidental trauma (age ≤ 5 years). METHODS: Using the National Trauma Databank from 2007 to 2015, patients (age ≤ 5 years) suffering facial fractures were included. Demographics and injury characteristics were compared between those sustaining accidental versus nonaccidental trauma (NAT). RESULTS: Over 9 years 9741 patients were included with 193 patients (2.0%) suffering NAT. Nonaccidental trauma patients were younger (median [interquartile range]; 0 [0, 2] versus 3 [1, 4], P < 0.001), and more frequently were insured by Medicaid (76.7% versus 41.9%, P < 0.001). NAT patients were more likely to sustain mandible fractures (38.9% versus 21.1%, P < 0.001), but less likely to sustain maxilla (9.8% versus 18.3%, P = 0.003), or orbital fractures (31.1% versus 53.4%, P < 0.001). Nonaccidental trauma patients had fewer instances of multiple facial fracture sites (8.9% versus 22.6%, P < 0.001). Among those sustaining mandible fractures, NAT patients were more likely to sustain condylar fractures (75.8% versus 48.4%, P < 0.001), but less likely to sustain subcondylar fractures (0% versus 13.2%, P = 0.002), or angle fractures (1.6 versus 8.7%, P = 0.048). CONCLUSIONS: Differences exist in facial fracture patterns in accidental versus nonaccidental trauma within the pediatric population at highest risk for abusive head trauma. Specifically, NAT is associated with fractures of the mandibular condyle and involve fewer facial fracture sites. In the appropriate context, presence of these fractures/patterns should increase suspicion for NAT.

Characterization of Age-Related Injury Patterns and Surgical Treatment of Pediatric Facial Fractures: Analysis of the National Trauma Data Bank.

BACKGROUND: Presentation of pediatric facial fractures varies widely and many injuries are encountered infrequently by most practitioners. This study summarizes injury patterns in a large cohort of facial fractures and their subsequent surgical management. METHODS: Demographic and clinical characteristics of patients 18 years of age or younger admitted between 2009 and 2015 to trauma centers participating in the National Trauma Data Bank were examined. Craniofacial fractures and reconstructive procedures performed at index admission were selected based on ICD-9 and AIS codes. A multivariable analysis was used to determine independent determinants of surgical repair. RESULTS: Out of 60,094 pediatric patients evaluated in the US emergency departments, 48,821 patients were admitted and underwent open treatment (n = 8364; 17.1%) or closed treatment (n = 4244; 8.7%) of facial fractures. Falls were the most common mechanism of injury in infants and toddlers (<2-year-old, 44.4%, P <0.001), while motor vehicle collisions (32.9%, P <0.001) and assault (22.1%, P <0.001) were most commonly seen in adolescents (12-18-year-old). The frequency and odds of repair of facial fractures increased with advancing age, more so with open than closed treatment in adolescents (73.0%) as compared to infants and toddlers (50.3%). Children who sustained mandible fractures are the most likely to require surgical treatment at index-admission (odds ratio = 13.9, 95% confidence interval 13.1-14.8, P <0.001). CONCLUSIONS: Population-based data shows that pediatric fracture patterns and associated early repair vary significantly with age. Patient demographics and hospital characteristics are significant determinants of surgical treatment that should be related to clinical outcomes in future studies.

Contemporary Characterization of Injury Patterns, Initial Management, and Disparities in Treatment of Facial Fractures Using the National Trauma Data Bank.

BACKGROUND: Contemporary description of facial fracture patterns and factors associated with early operative intervention at trauma centers is lacking. The purpose of this study was to characterize injuries and initial treatment patterns of patients suffering from facial fractures. METHODS: Using the National Trauma Databank from 2007 to 2015, patients suffering from facial fractures were included. Demographics, injury characteristics, and outcomes including operative interventions were assessed. RESULTS: Over 9 years, 626,270 patients were included: 74.5% were male, 39.0% suffered traumatic brain injury (TBI), and 23.3% severe noncraniofacial injuries (chest, abdomen, and/or extremity Abbreviated Injury Score ≥3). A total of 537,594 (85.8%) patients were admitted and 184,206 (34.3%) underwent operations for their facial injuries during the index hospitalization. The frequency and patterns of fractures varied by age, sex, race, and mechanism of injury. Operative intervention rates were highest for mandible (63.2%) and lowest for orbit fractures (1.0%). Multiple regression revealed that multiple factors were independently associated with the odds of early fracture repair including: female versus male (odds ratio [95% confidence interval]: 0.96 [0.94-0.98]), age >65 versus <18 years (0.62 [0.59-0.64]), non-white race (0.95 [0.94-0.97]), uninsured versus Medicaid (0.88 [0.86-0.90]), hospital bed size (>600 vs ≤200 beds, 1.67 [1.61-1.73]), TBI (0.70 [0.69-0.71]), and C-spine injury (0.93 [0.90-0.96]). CONCLUSIONS: Facial fractures are common among many demographic cohorts, and multiple patient and injury-specific factors influenced fracture patterns and management. Early operative intervention was highest for mandible fractures and lowest for orbit fractures. Multiple factors including age, sex, insurance status, hospital characteristics, and race/ethnicity were independently associated with early operative intervention, highlighting disparities in care.

Office-Based Three-Dimensional Printing Workflow for Craniomaxillofacial Fracture Repair.

Three-dimensional printing of patient-specific models is being used in various aspects of craniomaxillofacial reconstruction. Printing is typically outsourced to off-site vendors, with the main disadvantages being increased costs and time for production. Office-based 3-dimensional printing has been proposed as a means to reduce costs and delays, but remains largely underused because of the perception among surgeons that it is futuristic, highly technical, and prohibitively expensive. The goal of this report is to demonstrate the feasibility and ease of incorporating in-office 3-dimensional printing into the standard workflow for facial fracture repair.Patients with complex mandible fractures requiring open repair were identified. Open-source software was used to create virtual 3-dimensional skeletal models of the, initial injury pattern, and then the ideally reduced fractures based on preoperative computed tomography (CT) scan images. The virtual 3-dimensional skeletal models were then printed in our office using a commercially available 3-dimensional printer and bioplastic filament. The 3-dimensional skeletal models were used as templates to bend and shape titanium plates that were subsequently used for intraoperative fixation.Average print time was 6 hours. Excluding the 1-time cost of the 3-dimensional printer of $2500, roughly the cost of a single commercially produced model, the average material cost to print 1 model mandible was $4.30. Postoperative CT imaging demonstrated precise, predicted reduction in all patients.Office-based 3-dimensional printing of skeletal models can be routinely used in repair of facial fractures in an efficient and cost-effective manner.

Utility of Postoperative Mandibulomaxillary Fixation After Rigid Internal Fixation of Isolated Mandibular Fractures.

PURPOSE: The utility of postoperative mandibulomaxillary fixation (MMF) after open reduction and internal fixation (ORIF) of mandible fractures is debated. The purpose of this study is to analyze if patients undergoing ORIF with postoperative MMF have improved outcome compared with those treated with ORIF alone. METHODS: A retrospective study was performed on patients who underwent ORIF of isolated mandibular fractures. Patients were divided into those placed in MMF postoperatively (ORIF with MMF) and those who were not (ORIF only). Postoperative complications and follow-up compliance were compared. RESULTS: A total of 238 patients were identified. Of these, 204 had sufficient follow-up with 94 patients in the ORIF with MMF group and 107 patients in the ORIF only group. Both groups had similar minor complication rates (13% vs 12%, P = 0.83) and major complication rates (16% vs 13%, P = 0.69). After adjusting for potential confounders, the use of postoperative MMF did not reduce the risk of minor (P = 0.34) or major complications (P = 0.57). Patients with postoperative MMF had a 5% lost to follow-up rate compared to 20% in the ORIF only group. CONCLUSION: Postoperative MMF does not improve clinical outcome after ORIF in patients with isolated mandible fractures but has the potential benefit of improving follow-up compliance.