Precision bite ramps and aligners: An elective choice for deep bite treatment.

OBJECTIVE: To review a series of clinical studies demonstrating the clinical efficiency of aligners with bite ramps in the treatment of severe deep bite. MATERIALS AND METHODS: In order to predictably manage the correction of deep bite with aligners, precision bite ramps on maxillary incisors have been used while posterior extrusion and anterior intrusion in the lower jaw with lateral attachments and proper levelling of the curve of Spee have been planned. Transverse correction and controlled upper and lower incisors proclination completed the treatment plan. RESULTS: Full deep bite correction with normal overbite was obtained in nine months of treatment by a combination of anterior intrusion and posterior torque correction, distal tipping and relative extrusion. CONCLUSION: The use of bite ramps represents a valid option for the successful treatment of deep bite with aligners creating proper space for lateral sector extrusion and supporting lower anterior intrusion and controlled proclination.

Feasibility of Using Synthetic Aperture Radar to Aid UAV Navigation.

This study explores the potential of Synthetic Aperture Radar (SAR) to aid Unmanned Aerial Vehicle (UAV) navigation when Inertial Navigation System (INS) measurements are not accurate enough to eliminate drifts from a planned trajectory. This problem can affect medium-altitude long-endurance (MALE) UAV class, which permits heavy and wide payloads (as required by SAR) and flights for thousands of kilometres accumulating large drifts. The basic idea is to infer position and attitude of an aerial platform by inspecting both amplitude and phase of SAR images acquired onboard. For the amplitude-based approach, the system navigation corrections are obtained by matching the actual coordinates of ground landmarks with those automatically extracted from the SAR image. When the use of SAR amplitude is unfeasible, the phase content can be exploited through SAR interferometry by using a reference Digital Terrain Model (DTM). A feasibility analysis was carried out to derive system requirements by exploring both radiometric and geometric parameters of the acquisition setting. We showed that MALE UAV, specific commercial navigation sensors and SAR systems, typical landmark position accuracy and classes, and available DTMs lead to estimated UAV coordinates with errors bounded within ±12 m, thus making feasible the proposed SAR-based backup system.

Attachments for the Orthodontic Aligner Treatment-State of the Art-A Comprehensive Systematic Review.

BACKGROUND: In recent years the burden of aligner treatment has been growing. However, the sole use of aligners is characterized by limitations; thus attachments are bonded to the teeth to improve aligner retention and tooth movement. Nevertheless, it is often still a challenge to clinically achieve the planned movement. Thus, the aim of this study is to discuss the evidence of the shape, placement and bonding of composite attachments. METHODS: A query was carried out in six databases on 10 December 2022 using the search string ("orthodontics" OR "malocclusion" OR "Tooth movement techniques AND ("aligner*" OR "thermoformed splints" OR "invisible splint*" AND ("attachment*" OR "accessor*" OR "auxill*" AND "position*"). RESULTS: There were 209 potential articles identified. Finally, twenty-six articles were included. Four referred to attachment bonding, and twenty-two comprised the influence of composite attachment on movement efficacy. Quality assessment tools were used according to the study type. CONCLUSIONS: The use of attachments significantly improves the expression of orthodontic movement and aligner retention. It is possible to indicate sites on the teeth where attachments have a better effect on tooth movement and to assess which attachments facilitate movement. The research received no external funding. The PROSPERO database number is CRD42022383276.

Class II extraction treatment with aligners: a reliable approach / Traitement de la classe II avec extraction par aligneurs : une approche fiable

Aim: Class II extraction approach by means of maxillary first premolars represents a common treatment strategy in order to reduce the overjet and create a stable Class I canine relationship and Class II molar relationship. The objective of this paper is to describe digital planning protocol and complete clinical phases of space closure in Class II malocclusion treatment in adult patient. Materials and Methods: The accuracy of movements and correction of dental parameters has improved exponentially in recent years, as a result of continuous research performed in aligner orthodontics. However, the most complex movement to realize with aligners is the apical movement, but the application of the G6 protocol for managing extractive cases allows to obtain the final parallelism of the roots with a control of the tipping managed on the digital plan as an overcorrection (overtipping) of the roots adjacent to the extraction site. Through the description of two cases, this article will present the application of the specific protocol for first premolars extraction in order to manage anchorage and closure of extraction spaces. Results: All patients finished with proper OVJ and OVB with a Class II molar relationship and Class I canine relationship respecting face balance and smile arc. Discussion: The Invisalign G6 protocol through the use of SmartStage™ technology combined with SmartForce™ features provides vertical control during anterior sector retraction and teeth body movement maintaining maximum posterior anchorage.

Objectif: Le traitement de la classe II par extraction des premières prémolaires maxillaires représente une stratégie de traitement répandue dont le but est de réduire le surplomb horizontal (overjet) et de créer une classe I canine stable avec une classe II molaire thérapeutique. L'objectif de cet article était de décrire le protocole digital et les différentes phases cliniques de fermeture des espaces dans les cas de malocclusion de classe II chez les patients adultes. Matériels et méthodes: La précision des mouvements et de la correction des paramètres dentaires s'est améliorée de façon exponentielle ces dernières années, grâce à la recherche continue effectuée dans le domaine de l'orthodontie par aligneurs. Cependant, le mouvement le plus complexe à réaliser avec les aligneurs est le déplacement apical, mais l'application du protocole G6 pour la gestion des cas d'extraction permet d'obtenir le parallélisme final des racines avec un contrôle du tipping géré sur le plan numérique comme une surcorrection (overtipping) des racines adjacentes au site d'extraction. À travers la description de deux cas, cet article présentera l'application du protocole spécifique pour la première extraction des prémolaires afin de gérer l'ancrage et la fermeture des espaces d'extraction. Résultats: Tous les patients ont terminé avec un surplomb vertical et horizontal correct avec une relation molaire de classe II et une relation canine de classe I respectant l'équilibre du visage et l'arc du sourire. Discussion: Le protocole Invisalign G6, grâce à l'utilisation de la technologie SmartStage™ combinée aux fonctionnalités SmartForce™, permet un contrôle vertical pendant la rétraction du secteur antérieur et le mouvement des dents, en maintenant un ancrage postérieur maximal.

Impacted Canine Management Using Aligners Supported by Orthodontic Temporary Anchorage Devices.

INTRODUCTION: Temporary anchorage devices (TADs) represent an essential instrument under difficult anchorage conditions, especially when the procedure is approached with an aligner technique. The objective of this paper is to describe a possible sequence of orthodontic treatment of impacted canines with aligners supported by orthodontic mini-screws. MATERIALS AND METHODS: The resolution of impacted canines requires a specific clinical sequence constituted by different steps: the space creation, the surgical exposure, and the orthodontic traction (on the horizontal, vertical, and buccal direction). Following this sequence, two different clinical scenarios can be identified following the space available and the initial malocclusion. The first scenario is constituted by recreating the space for the impacted canine along with the correction of the malocclusion by means of an aligner system and then approaching the de-impaction with TADs. The second clinical scenario is related to the canine-first approach, an immediate de-impaction stage based solely on the use of TADs and sectional wires, and then a finishing phase with aligners. RESULTS: Both approaches to the treatment of impacted canines can be considered reliable, but of course selecting one or the other depends on the space available in the upper arch and on the initial malocclusion. CONCLUSIONS: The use of aligners in the treatment of impacted canines in combination with TADs and sectional wires represents a viable alternative option to the conventional systems for canine disinclusion. When the treatment is managed with the presented approaches, no further cooperation with the patient is required in order to support the forced eruption, and an ideal biomechanical approach can be easily applied with one or two mini-screws.

G-Block: Posterior anchorage device tads-supported after molar distalization with aligners: An adult case report.

INTRODUCTION: Temporary anchorage devices represent a fundamental tool to reliably manage orthodontic anchorage in several conditions. One of the most recent application is represented by the combination of aligners with TADs to simplify specific movements such as posterior intrusion, anterior intrusion, molars distalization. The objective of this case report is to show a novel technique called "G-block" to manage posterior anchorage with a hybrid approach combining aligners and TADs. MATERIALS AND METHODS: This case report shows a Class II malocclusions (end to end relationship) with increased overjet and incisors proclination treated with aligners and maxillary distalization approach. To manage the posterior anchorage after second molar distalization and to avoid the use of Class II elastics, TADs (Spider Pin 1.3mm×10mm) were inserted into the interradicular space between the maxillary first and second molars following second molar distalization. The mini screws were used to provide both direct and indirect anchorage. The second molars were connected to the TAD by means of a 0.18 SS wire embedded in the attachment and blocked to the head of the mini-screw for indirect anchorage, while an elastic chain connecting the TADs to the buttons bonded to the first molars and premolars provided direct anchorage during first molar and premolar distalization. RESULTS: A solid bilateral Class I occlusion was achieved with a normal overjet and overbite. The dental arches were well aligned and leveled with good intra-arch symmetry and regular arch forms. Final cephalometric analysis showed a significant change in upper incisor proclination (15̊ reduction) while maintaining correct torque control and a significant change in molar relationship. The aesthetic analysis showed an improvement in lip competence and incisor exposure. CONCLUSION: The use of TADs for posterior anchorage after maxillary molar distalization with aligners, could represent an effective solution to easily manage the posterior anchorage reducing the need for patient's compliance in using elastics and in particular simplifying the posterior teeth movements by coupling the force expressed from the aligners with the force expressed by the auxiliary system.

Simplifying the approach of open bite treatment with aligners and selective micro-osteoperforations: An adult case report.

INTRODUCTION: Open bite treatment represents one of the most challenging malocclusions because it has a multifactorial aetiology and in particular because its dental correction strongly depends on the possibility to manage the posterior intrusion with a reliable system controlling the vertical position of upper and lower molars. Clear Aligner system proved to be an efficient way to control the hyper divergent patients performing posterior intrusion and managing the counterclockwise rotation of the mandible. This technique has shown to be predictable for molar intrusion up to 1mm. METHODS: This case report shows a successful open bite orthodontic treatment in which the molar intrusion effect has been amplified in the digital setup and facilitated by means of micro-osteo perforations (MOPs) performed selectively only in the molar areas in order to stimulate the bone in a specific movement direction. The digital setup was set to create molar intrusion in upper and lower molars up to 3mm and thus favouring a counterclockwise mandible rotation, supported and controlled by elastics. The posterior intrusion was combined with an anterior extrusion following smile arc exposure and the treatment was completed in 16 months overall. RESULTS: The final cephalometric analysis showed a significant reduction of SN/Go-Gn angle of 4° with consequent counterclockwise rotation of the mandible. The mandibular superimposition showed a 2.5mm molar intrusion without root resorption and with a controlled incisor proclination. A solid Class I bilateral occlusion was achieved with normal overjet and overbite, the dental arches were well aligned and levelled with good intra-arch symmetry and regular arch form. The frontal aesthetic analysis showed an improvement of the dental exposure with a normalized smile arc due to a combination of relative and pure extrusion. CONCLUSION: The present alternative approach to treat severe open bite combining selective MOPs in the posterior and lateral sectors and clear aligners could predictably control molar vertical position avoiding the use of auxiliary and eliminating the risk of root resorption. Arch development, molar intrusion, and overbite correction with counterclockwise mandible rotation could be predictably achieved respecting digital setup and creating proper Class I bilateral occlusion.

Bidimensional system for space closure treatment of missing lateral incisors: 10 years follow-up.

INTRODUCTION: Missing lateral incisors represent a common condition that normally requires specific anchorage conditions to be treated with space closure mechanics to protract upper teeth creating a proper occlusal relationship. CASE PRESENTATION: Two cases showing Class II malocclusion with missing lateral incisors in developing age are presented, both treated with the same approach of maximum anterior anchorage applied using the Bidimensional Technique system. Long-term follow-up of 10 years is shown. MANAGEMENT AND OUTCOME: Bidimensional technique is a modified edgewise technique that uses sliding mechanics for protraction of the posterior segments by placing vertically slotted brackets of different sizes on the anterior (.018" x 0.025") and posterior teeth (.022" x 0.028"). When a .018" x .022" wire is inserted in the .018" x .025" brackets slot on the incisors, third-order control is created in the incisor segment while the wire is undersized in the rest of the arch. Lateral brackets have been positioned on the canines, while the canine brackets have been positioned on the first premolars respecting a differential bonding height able to produce canine extrusion and first premolars intrusion and proper torque expression. Full Class II molar relationship and Class I substituted canine relationship has been reached in both cases and kept stable in the long-term follow-up (10 years). DISCUSSION: The described approach provided anterior anchorage with more simple mechanics expressing the anterior torque with a full engagement concept and adding few auxiliaries (uprighting springs) which do not require compliance.

Sliding mechanics in extraction cases with a bidimensional approach.

The Bidimensional technique is an edgewise technique in which 2 different sized vertically slotted brackets are used. On the central and lateral incisors, .018" x .022" brackets are placed on the central and lateral incisors and .022" x .028" brackets are placed on the canines, molars and premolars. The maxillary incisor brackets are programmed. All movements, including bodily retraction of the maxillary incisors are produced by sliding mechanincs. When retracting maxillary incisors, an .018" x. 022" wire which fills the vertical portion of the brackets, providing torque control, is inserted and 300 gm intra arch forces are placed for incisor retraction. In the buccal segments, the .018" x .022" wire is undersized relative to the canine, premolar and molar brackets and can readily slide through the brackets and tubes. The method is described and illustrated with one case report of the extraction treatment of a patient with Class I bimaxillary protrusion.

Extraction treatment using Invisalign Technique.

The Invisalign method is gaining an increasing interest as an alternative treatment option in adult patients and in difficult orthodontic cases. The aim of this work is to show a class II malocclusion with severe crowding in the upper and lower arches treated with the extraction of the upper first premolars performed by means of Invisalign. The alignment phase was successfully completed but the space closure achieved with crown tipping and without correct root inclination making a further fixed appliance phase necessary.

Extraction treatment using a palatal implant for anchorage.

AIM: To describe the use of Straumann Orthosystem implants for orthodontic anchorage. METHODS: The Straumann Orthosystem consists of a titanium palatal implant and connected device, which can be used when absolute anchorage is required. In the present study the implant was placed in the midline at the junction of the alveolar process and hard palate. The implant was osseointegrated 13 weeks after placement. A palatal arch attached to the implant and upper first molar bands was used to provide stationary anchorage in a 23 year-old female with protruding upper anterior teeth and moderate crowding of both arches. CONCLUSION: A palatal implant provides stationary anchorage for retraction of anterior maxillary teeth.

The use of titanium miniscrews for molar protraction in extraction treatment.

Orthodontic space closure in the mandibular arch by protraction of the mandibular second molars, after the extraction of first molars, may sometimes result in loss of incisor anchorage when using conventional orthodontic procedures. The introduction of miniscrews for immediate loading as orthodontic anchorage, has enlarged treatment possibilities. The authors illustrate their clinical experience in an adult patient treated with the extraction of mandibular first molars and the protraction of second and third molars into the extraction sites. Anchorage control was achieved with the surgical insertion of titanium miniscrews for immediate loading in the cortical bone distal to second bicuspids. Space closure was achieved by means of sliding mechanics according to Bidimensional Technique. The position of lower incisors was maintained preventing any detrimental facial effect.