A Microporous Multi-Cage Metal-Organic Framework for an Effective One-Step Separation of Branched Alkanes Feeds.

The improvement of the Total Isomerization Process (TIP) for the production of high-quality gasoline with the ultimate goal of reaching a Research Octane Number (RON) higher than 92 requires the use of specific sorbents to separate pentane and hexane isomers into classes of linear, mono- and di-branched isomers. Herein we report the design of a new multi-cage microporous Fe(III)-MOF (referred to as MIP-214, MIP stands for materials of the Institute of Porous Materials of Paris) with a flu-e topology, incorporating an asymmetric heterofunctional ditopic ligand, 4-pyrazolecarboxylic acid, that exhibits an appropriate microporous structure for a thermodynamic-controlled separation of hydrocarbon isomers. This MOF produced via a direct, scalable, and mild synthesis route was proven to encompass a unique separation of C5/C6 isomers by classes of low RON over high RON alkanes with a sorption hierarchy: (n-hexane≫n-pentane≈2-methylpentane>3-methylpentane)low RON≫(2,3-dimethylbutane≈i-pentane≈2,2-dimethylbutane)high RON following the adsorption enthalpy sequence. We reveal for the first time that a single sorbent can efficiently separate such a complex mixture of high RON di-branched hexane and mono-branched pentane isomers from their low RON counterparts, which is a major achievement reported so far.

Immobilisation of contaminants by 'green'-synthesized magnetite as a remediation approach to the phosphogypsum waste leachates model solution.

Contaminant removal from (waste)waters by magnetite is a promising technology. In the present experimental study, a magnetite recycled from the steel industry waste (zero-valent iron powder) was used to investigate the sorption of As, Sb and U in phosphate-free and -rich suspensions, i.e. as a remediation for the acidic phosphogypsum leachates derived from the phosphate fertilizer industry. The results showed up to 98% U removal under controlled pH conditions, while phosphate did not hinder this immobilisation. In contrast, the results confirmed the limited uptake of As and Sb oxyanions by magnetite in presence of phosphate as the competing anion, displaying only 7-11% removal, compared to 83-87% in the phosphate-free sorption experiments. To limit this wastewater problem, raw ZVI anaerobic oxidation was examined as mechanism to increase the pH and as a source of Fe2+ in a first step, and in a second step to remove phosphate via vivianite precipitation, therefore prior to the reaction with magnetite. UV-Vis, XRD and SEM-EDS showed that vivianite precipitation is feasible at pH > 4.5, mainly depending on the phosphate concentration. The higher the [PO43-], the lower is the pH at which vivianite precipitates and the higher the % removal of phosphate from solution. It is anticipated that an optimum 3-steps design with separate reactors controlling the conditions of ZVI oxidation, followed by vivianite precipitation and finally, reaction with magnetite, can achieve high contaminant uptake in field applications.

Deciphering the Thermal and Electrochemical Behaviors of Dual Redox-Active Iron Croconate Violet Coordination Complexes.

Interest in coordination compounds based on non-innocent ligands (NILs) for electrochemical energy storage has risen in the last few years. We have focused our attention on an overlooked redox active linker, croconate violet, which has not yet been addressed in this field although closely related to standard NILs such as catecholate and tetracyanoquinodimethane. Two anionic complexes consisting of Fe(II) and croconate violet (-2) with balancing potassium cations were isolated and structurally characterized. By a combination of in situ and ex situ techniques (powder and single-crystal X-ray diffraction, infrared, and 57Fe Mössbauer spectroscopies), we have shown that their dehydration occurs through complex patterns, whose reversibility depends on the initial crystal structure but that the structural rearrangements around the iron cations occur without any oxidation. While electrochemical studies performed in solution clearly show that both the organic and inorganic parts can be reversibly addressed, in the solid state, poor charge storage capacities were initially measured, mainly due to the solubilization of the solids in the electrolyte. By optimizing the formulation of the electrode and the composition of the electrolyte, a capacity of >100 mA h g-1 after 10 cycles could be achieved. This suggests that this family of redox active linkers deserves to be investigated for solid-state electrochemical energy storage, although it requires the solving of the issues related to the solubilization of the derived coordination compounds.

Selenium Nanowire Formation by Reacting Selenate with Magnetite.

The mobility of 79Se, a fission product of 235U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O42-) and selenite (Se(IV)O32-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.

Iron Stearate Structures: An Original Tool for Nanoparticles Design.

Iron carboxylates are widely used as iron precursors in the thermal decomposition process or considered as in situ formed intermediate precursors. Their molecular and three-dimensional (3D)-structural nature has been shown to affect the shape, size, and composition of the resulting iron oxide nanoparticles (NPs). Among carboxylate precursors, stearates are particularly attractive because of their higher stability to aging and hydration and they are used as additives in many applications. Despite the huge interest of iron stearates, very few studies aimed up to now at deciphering their full metal-ligand structures and the mechanisms allowing us to achieve in a controlled manner the bottom-up NP formation. In this work, we have thus investigated the molecular structure and composition of two iron stearate precursors, synthesized by introducing either two (FeSt2) or three (FeSt3) stearate (St) chains. Interestingly, both iron stearates consist of lamellar structures with planes of iron polynuclear complexes (polycations) separated with stearate chains in all-trans conformation. The iron content in polycations was found very different between both iron stearates. Their detailed characterizations indicate that FeSt2 is mainly composed of [Fe3-(µ3-O)St6·xH2O]Cl, with no (or few) free stearate, whereas FeSt3 is a mixture of mainly [Fe7(µ3-O(H))6(µ2-OH)xSt12-2x]St with some [Fe3(µ3-O)St6·xH2O]St and free stearic acid. The formation of bigger polynuclear complexes with FeSt3 was related to higher hydrolysis and condensation rates within the iron(III) chloride solution compared to the iron(II) chloride solution. These data suggested a nucleation mechanism based on the condensation of polycation radicals generated by the catalytic departure of two stearate chains from an iron polycation-based molecule.

Influence of Silica Coatings on Magnetite-Catalyzed Selenium Reduction.

The reactivity of iron(II/III) oxide surfaces may be influenced by their interaction with silica, which is ubiquitous in aquatic systems. Understanding the structure-reactivity relationships of Si-coated mineral surfaces is necessary to describe the complex surface behavior of nanoscale iron oxides. Here, we use Si-adsorption isotherms and Fourier transform infrared spectroscopy to analyze the sorption and polymerization of silica on slightly oxidized magnetite nanoparticles (15% maghemite and 85% magnetite, i.e., ∼2 maghemite surface layers), showing that Si adsorption follows a Langmuir isotherm up to 2 mM dissolved Si, where surface polymerization occurs. Furthermore, the effects of silica surface coatings on the redox-catalytic ability of magnetite are analyzed using selenium as a molecular probe. The results show that for partially oxidized nanoparticles and even under different Si surface coverages, electron transfer is still occurring. The results indicate anion exchange between silicate and the sorbed SeIV and SeVI. X-ray absorption near-edge structure analyses of the reacted Se indicate the formation of a mixed selenite/Se0 surface phase. We conclude that neither partial oxidation nor silica surface coatings block the sorption and redox-catalytic properties of magnetite nanoparticles, a result with important implications to assess the reactivity of mixed-valence phases in environmental settings.

Chemical Inhomogeneity in Iron Oxide@CoO Core-Shell Nanoparticles: A Local Probe Study Using Zero-Field and In-Field 57Fe Mössbauer Spectrometry.

Core-shell magnetic nanoparticles type Fe3-xO4 (≈10 nm)@CoO (≈3 nm) prepared by forced hydrolysis in polyol medium have been investigated through the combined use of dc magnetization measurements by SQUID and local analysis by 57Fe Mössbauer spectrometry. A shift of the hysteresis loop along the field axis was observed, which highlights the presence of exchange bias coupling in these nanoparticles. This exchange bias coupling is accompanied by an unexpected high value of coercive field in hysteresis loop in mode ZFC. A local probe study using both zero-field and in-field Mössbauer spectrometry reveals complex hyperfine structures. Great attention is paid to the fitting procedure: it is concluded that Fe3-xO4@CoO nanoparticles result from a mixture of magnetite and maghemite phases in addition to the formation of an interface-like layer close to a cobalt ferrite. Such a structure explains both the high coercive field value observed by SQUID and the presence of exchange bias coupling.

Structural behavior of laser-irradiated γ-Fe2O3 nanocrystals dispersed in porous silica matrix : γ-Fe2O3 to α-Fe2O3 phase transition and formation of ε-Fe2O3.

The effects of laser irradiation on γ-Fe2O3 4 ± 1 nm diameter maghemite nanocrystals synthesized by co-precipitation and dispersed into an amorphous silica matrix by sol-gel methods have been investigated as function of iron oxide mass fraction. The structural properties of γ-Fe2O3 phase were carefully examined by X-ray diffraction and transmission electron microscopy. It has been shown that γ-Fe2O3 nanocrystals are isolated from each other and uniformly dispersed in silica matrix. The phase stability of maghemite nanocrystals was examined in situ under laser irradiation by Raman spectroscopy and compared with that resulting from heat treatment by X-ray diffraction. It was concluded that ε-Fe2O3 is an intermediate phase between γ-Fe2O3 and α-Fe2O3 and a series of distinct Raman vibrational bands were identified with the ε-Fe2O3 phase. The structural transformation of γ-Fe2O3 into α-Fe2O3 occurs either directly or via ε-Fe2O3, depending on the rate of nanocrystal agglomeration, the concentration of iron oxide in the nanocomposite and the properties of silica matrix. A phase diagram is established as a function of laser power density and concentration.

A magnetic nanogel based on O-carboxymethylchitosan for antitumor drug delivery: synthesis, characterization and in vitro drug release.

This paper studied the synthesis, characterization and use of the magnetic chitosan nanogel for carrying meleimidic compounds. The hydrogel polymer was prepared using O-carboxymethylchitosan, which was crosslinked with epichlorohydrin for subsequent incorporation of iron oxide magnetic nanoparticles. The characterization revealed that the magnetic material comprises about 10% of the hydrogel. This material is comprised of magnetite and maghemite and exhibits ferro-ferrimagnetic behavior. The average particle size is 4.2 nm. There was high incorporation efficiency of maleimides in the magnetic nanogel. The release was of sustained character and there was a greater release when an external magnetic field was applied. The mathematical model that best explained the process of drug release by the magnetic hydrogel was that of Peppas-Sahlin. The magnetic nanogel proved to be an excellent candidate for use in drug-delivery systems.

Metastable (Bi, M)2(Fe, Mn, Bi)2O(6+x) (M = Na or K) pyrochlores from hydrothermal synthesis.

The hydrothermal syntheses, structures, and magnetism of two new pyrochlore oxides of compositions (Na0.60Bi1.40)(Fe1.06Mn0.17Bi0.77)O6.87 and (K0.24Bi1.51)(Fe1.07Mn0.15Bi0.78)O6.86 are described. With preparation at 200 °C for 6 h in solutions of sodium or potassium hydroxide, the alkali metals introduced from these mineralizers are essential to the synthesis of the phases. The average long-range order of the pyrochlore structure, with space group Fd3̅m, was investigated and refined against X-ray and neutron diffraction data, and it was shown that disorder is present in both the metal and coordinating oxygen positions, along with metal-mixing across both the A and B sites of the structure. XANES analysis confirms the presence of Mn(4+), mixed valence Bi(3+) and Bi(5+), and Fe(3+), the last also verified by (57)Fe Mössbauer spectroscopy. Magnetic measurements show a lack of long-range magnetic ordering that is typical of geometrically frustrated pyrochlores. The observed glasslike interactions occur at low temperatures, with the onset temperature depending upon the magnitude of the applied external field. Variable temperature X-ray diffraction shows that these pyrochlores are metastable and collapse on heating at ca. 395 °C, which suggests that their formation by conventional solid-state synthesis would be impossible.

Intimately mixed copper, cobalt, and iron fluorides resulting from the insertion of fluorine into a LDH template.

The advancement of lithium-ion batteries (LIBs) with high performance is crucial across various sectors, notably in space exploration. This advancement hinges on the development of innovative cathode materials. Our research is dedicated to pioneering a new category of cathodes using fluorinated multimetallic materials, with a specific focus on diverging from the traditional Ni, Co, and Mn-based NMC chemistries by substituting nickel and manganese with copper and iron which are more sustainable elements. Our goal is also to enhance the robustness of cathodes upon cycling by substituting oxygen with fluorine as the metal-ligand. To achieve this, an intimate composite blend of CuF2 and FeF3, through the multi-metallic template fluorination (MMTF) methodology using a layered double hydroxide (LDH) as a precursor has been designed. Each of these components was carefully selected for its distinct attributes, including high redox potential, elevated energy density, substantial theoretical capacity, and improved cyclability. The composition denoted as (Cu1.5Co0.5)2+(Fe0.75Al0.25)3+ has been selected for fluorination because it maximizes Fe3+ and Cu2+ amount in the screened LDHs. Subsequently, this particular LDH was fluorinated through solid-gas fluorination at different temperatures (200, 350, and 500 °C) using gaseous molecular fluorine (F2). A comprehensive characterization of these materials using various techniques, including X-ray diffraction (XRD), 57Fe Mössbauer spectrometry, scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), and inductively coupled plasma analyses (ICP-AES) was conducted, and the evolution of LDH upon fluorination has revealed an intermediate porous texture particularly sensitive to hydration. Two original crystallographic phases are else obtained by fluorination: one formed by the hydration of the amorphous intermediate compound: Cu3Fe1.5Al0.5F12(H2O)12 an anti-perovskite structure and another stabilized through the combination of solid gas fluorination and LDH precursor yielding an original CoFeF5-type phase. Raman operando during cyclic voltammetry measurement applied on a sample fluorinated at 500 °C and used as a cathode in front of lithium metal was finally conducted to validate redox activity and mechanism.

Exploring the Substitution of Fe(III) by Gd(III) in Nanomagnetite.

A promising superparamagnetic nanomagnetite dipped with Gd was synthesized for possible medical applications. Its size and morphology are independent of Gd content ranging from 1 to 5%. Gadolinium (III) replaced Fe(III) in the lattice. The sizes of Gd-doped nanoparticles ranged from 5 to 50 nm and exhibited a pure magnetite mineralogical phase.

Magnetic anisotropy engineering in onion-structured metal oxide nanoparticles combining dual exchange coupling and proximity effects.

A series of exchange-coupled magnetic nanoparticles combining several magnetic phases in an onion-type structure were synthesized by performing a three-step seed-mediated growth process. Iron and cobalt precursors were alternatively decomposed in high-boiling-temperature solvents (288-310 °C) to successively grow CoO and Fe3-δO4 shells (the latter in three stages) on the surface of Fe3-δO4 seeds. The structure and chemical composition of these nanoparticles were investigated in depth by combining a wide panel of advanced techniques, such as scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy-spectrum imaging (EELS-SI), 57Fe Mössbauer spectrometry, and X-ray circular magnetic dichroism (XMCD) techniques. The size of the nanoparticles increased progressively after each thermal decomposition step, but the crystal structure of core-shell nanoparticles was significantly modified during the growth of the second shell. Indeed, the antiferromagnetic CoO phase was progressively replaced by the CoFe2O4 ferrimagnet due to the concomitant processes of partial solubilization/crystallization and the interfacial cationic diffusion of iron. A much more complex chemical structure than that suggested by a simple size variation of the nanoparticles is thus proposed, namely Fe3-δO4@CoO-CoFe2O4@Fe3-δO4, where an intermediate Co-based layer was shown to progressively become a single, hybrid magnetic phase (attributed to proximity effects) with a reduction in the CoO amount. In turn, the dual exchange-coupling of this hybrid Co-based intermediate layer (with high anisotropy and ordering temperature) with the surrounding ferrite (core and outer shells) stabilized the particle moment well above room temperature. These effects allow for the production of Fe oxide-based magnetic nanoparticles with high effective anisotropy, thus revealing the potential of this strategy to design rare-earth-free permanent nanomagnets at room temperature.

On the use of amine-borane complexes to synthesize iron nanoparticles.

The effectiveness of amine-borane as reducing agent for the synthesis of iron nanoparticles has been investigated. Large (2-4 nm) Fe nanoparticles were obtained from [Fe{N(SiMe3)2}2]. Inclusion of boron in the nanoparticles is clearly evidenced by extended X-ray absorption fine structure spectroscopy and Mössbauer spectrometry. Furthermore, the reactivity of amine-borane and amino-borane complexes in the presence of pure Fe nanoparticles has been investigated. Dihydrogen evolution was observed in both cases, which suggests the potential of Fe nanoparticles to promote the release of dihydrogen from amine-borane and amino-borane moieties.

Isomorphous substitution in a flexible metal-organic framework: mixed-metal, mixed-valent MIL-53 type materials.

Mixed-metal iron-vanadium analogues of the 1,4-benzenedicarboxylate (BDC) metal-organic framework MIL-53 have been synthesized solvothermally in N,N'-dimethylformamide (DMF) from metal chlorides using initial Fe:V ratios of 2:1 and 1:1. At 200 °C and short reaction time (1 h), materials (Fe,V)(II/III)BDC(DMF(1-x)F(x)) crystallize directly, whereas the use of longer reaction times (3 days) at 170 °C yields phases of composition [(Fe,V)(III)0.5(Fe,V)0.5(II)(BDC)(OH,F)](0.5-)·0.5DMA(+) (DMA = dimethylammonium). The identity of the materials is confirmed using high-resolution powder X-ray diffraction, with refined unit cell parameters compared to known pure iron analogues of the same phases. The oxidation states of iron and vanadium in all samples are verified using X-ray absorption near edge structure (XANES) spectroscopy at the metal K-edges. This shows that in the two sets of materials each of the vanadium and the iron centers are present in both +2 and +3 oxidation states. The local environment and oxidation state of iron is confirmed by (57)Fe Mössbauer spectrometry. Infrared and Raman spectroscopies as a function of temperature allowed the conditions for removal of extra-framework species to be identified, and the evolution of µ2-hydroxyls to be monitored. Thus calcination of the mixed-valent, mixed-metal phases [(Fe,V)(III)0.5(Fe,V)0.5(II)(BDC)(OH,F)](0.5-)·0.5DMA(+) yields single-phase MIL-53-type materials, (Fe,V)(III)(BDC)(OH,F). The iron-rich, mixed-metal MIL-53 shows structural flexibility that is distinct from either the pure Fe material or the pure V material, with a thermally induced pore opening upon heating that is reversible upon cooling. In contrast, the material with a Fe:V content of 1:1 shows an irreversible expansion upon heating, akin to the pure vanadium analogue, suggesting the presence of some domains of vanadium-rich regions that can be permanently oxidized to V(IV).

Influence of Nd Substitution on the Phase Constitution in (Zr,Ce)Fe10Si2 Alloys with the ThMn12 Structure.

Iron-based compounds with a ThMn12-type structure have the potential to bridge the gap between ferrites and high performance Nd2Fe14B magnets. From the point of view of possible applications, the main advantage is their composition, with about 10 wt.% less rare earth elements in comparison with the 2:14:1 phase. On the other hand, the main issue delaying the development of Fe-rich alloys with a ThMn12-type structure is their structural stability. Therefore, various synthesis methods and stabilizing elements have been proposed to stabilize the structure. In this work, the influence of increasing Nd substitution on the phase constitution of Zr0.4-xNdxCe0.6Fe10Si2 (0 ≤ x ≤ 0.3) alloys was analyzed. X-ray diffraction and 57Fe Mössbauer spectrometry were used as the main methods to derive the stability range and destabilization routes of the 1:12 structure. For the arc-melted samples, an increase in the lattice parameters of the ThMn12-type structure was observed with the simultaneous growth of bcc-(Fe,Si) content with increasing Nd substitution. After isothermal annealing, the ThMn12-type structure (and the coexisting bcc-(Fe,Si)) were stable over the whole composition range. While the formation of a 1:12 phase was totally suppressed in the as-cast state for x = 0.3, further heat treatment resulted in the growth of about 45% of the ThMn12-type phase. The results confirmed that the stability range of ThMn12-type structure in the Nd-containing alloys was well improved by other substitutions and the heat treatment, which in turn, is also needed to homogenize the ThMn12-type phase. After further characterization of the magnetic properties and optimization of microstructure, such hard/soft magnetic composites can show their potential by exploiting the exchange spring mechanism.

Two-step single-reactor synthesis of oleic acid- or undecylenic acid-stabilized magnetic nanoparticles by thermal decomposition.

Different iron oxides (i.e., magnetite, maghemite, goethite, wüstite), particularly nanosized particles, show distinct effects on living organisms. Thus, it is of primary importance for their biomedical applications that the morphology and phase-structural state of these materials are investigated. The aim of this work was to obtain magnetic nanoparticles in a single reactor using Fe(III) acetylacetonate as the initial precursor for the synthesis of Fe(III) oleate or Fe(III) undecylate followed by their thermolysis in situ. We proposed a new approach, according to which the essential magnetite precursor (a complex salt of higher acids - Fe(III) alkanoates) is obtained in a solvent with a high boiling point via displacement reaction of acetylacetone with a higher acid from Fe(III) acetylacetonate during its elimination from the reaction mixture under vacuum conditions. Magnetic nanoparticles (NPM) were characterized in terms of morphology, hydrodynamic diameter, and composition via several techniques, such as transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, Fourier-transform infrared spectroscopy/attenuated total reflectance, 57Fe Mössbauer spectroscopy, and X-ray diffraction. The effect of unsaturated oleic (OA) and undecylenic (UA) acids, which are both used as a reagent and as a nanoparticle stabilizer, as well as the influence of their ratio to Fe(III) acetylacetonate on the properties of particles were investigated. Stable dispersions of NPM were obtained in 1-octadecene within the OA or UA ratio from 3.3 mol to 1 mol of acetylacetonate and up to 5.5 mol/mol. Below the mentioned limit, NPM dispersions were colloidally unstable, and at higher ratios no NPM were formed which could be precipitated by an applied magnetic field. Monodisperse nanoparticles of iron oxides were synthesized with a diameter of 8-13 nm and 11-16 nm using OA and UA, respectively. The organic shell that enables the particle to be dispersed in organic media, in the case of oleic acid, covers their inorganic core only with a layer similar to the monomolecular layer, whereas the undecylenic acid forms a thicker layer, which is 65% of the particle mass. The result is a significantly different resistance to oxidation of the nanoparticle inorganic cores. The core of the particles synthesized using oleic acid is composed of more than 90% of maghemite. When undecylenic acid is used for the synthesis, the core is composed of 75% of magnetite.

Oxidation State and Structure of Fe in Nontronite: From Oxidizing to Reducing Conditions.

The redox reaction between natural Fe-containing clay minerals and its sorbates is a fundamental process controlling the cycles of many elements such as carbon, nutrients, redox-sensitive metals, and metalloids (e.g., Co, Mn, As, Se), and inorganic as well as organic pollutants in Earth's critical zone. While the structure of natural clay minerals under oxic conditions is well-known, less is known about their behavior under anoxic and reducing conditions, thereby impeding a full understanding of the mechanisms of clay-driven reduction and oxidation (redox) reactions especially under reducing conditions. Here we investigate the structure of a ferruginous natural clay smectite, nontronite, under different redox conditions, and compare several methods for the determination of iron redox states. Iron in nontronite was gradually reduced chemically with the citrate-bicarbonate-dithionite (CBD) method. 57Fe Mössbauer spectrometry, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) spectroscopy including its pre-edge, extended X-ray absorption fine structure (EXAFS) spectroscopy, and mediated electrochemical oxidation and reduction (MEO/MER) provided consistent Fe(II)/Fe(III) ratios. By combining X-ray diffraction (XRD) and transmission electron microscopy (TEM), we show that the long-range structure of nontronite at the highest obtained reduction degree of 44% Fe(II) is not different from that of fully oxidized nontronite except for a slight basal plane dissolution on the external surfaces. The short-range order probed by EXAFS spectroscopy suggests, however, an increasing structural disorder and Fe clustering with increasing reduction of structural Fe.

Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties.

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

Hierarchical superparamagnetic metal-organic framework nanovectors as anti-inflammatory nanomedicines.

Among a plethora of drug nanocarriers, biocompatible nanoscale metal-organic frameworks (nanoMOFs) with a large surface area and an amphiphilic internal microenvironment have emerged as promising drug delivery platforms, mainly for cancer therapy. However, their application in biomedicine still suffers from shortcomings such as a limited chemical and/or colloidal stability and/or toxicity. Here, we report the design of a hierarchically porous nano-object (denoted as USPIO@MIL) combining a benchmark nanoMOF (that is, MIL-100(Fe)) and ultra-small superparamagnetic iron oxide (USPIO) nanoparticles (that is, maghemite) that is synthesized through a one-pot, cost-effective and environmentally friendly protocol. The synergistic coupling of the physico-chemical and functional properties of both nanoparticles confers to these nano-objects valuable features such as high colloidal stability, high biodegradability, low toxicity, high drug loading capacity as well as stimuli-responsive drug release and superparamagnetic properties. This bimodal MIL-100(Fe)/maghemite nanocarrier once loaded with anti-tumoral and anti-inflammatory drugs (doxorubicin and methotrexate) shows high anti-inflammatory and anti-tumoral activities. In addition, the USPIO@MIL nano-object exhibits excellent relaxometric properties and its applicability as an efficient contrast agent for magnetic resonance imaging is herein demonstrated. This highlights the high potential of the maghemite@MOF composite integrating the functions of imaging and therapy as a theranostic anti-inflammatory formulation.