The intra- and interobserver reliability of the Tile AO, the Young and Burgess, and FFP classifications in pelvic trauma.

INTRODUCTION: Several different systems of classification have been developed to understand the complexity of pelvic ring fractures, to facilitate communication between physicians and to support the selection of appropriate therapeutic measures. The purpose of this study was to measure the inter- and intraobserver reliability of Tile AO, Young and Burgess, and FFP classification in pelvic ring fractures. The Rommens classification system (FFP) is analyzed for the first time. MATERIALS AND METHODS: Four reviewers (2 × senior pelvic trauma surgeon, 1 × resident, 1 × medical student) separately analyzed and classified 154 CT scans of patients with pelvic fracture. The Tile AO, the Young and Burgess, and the FFP classifications (subgroup with patients ≥ 60 years) were compared. Another blinded re-evaluation was carried out after 2 months to determine intraobserver reliability. RESULTS: The overall interobserver agreement was fair for all classification systems (ICC: OTA 0.55, Young and Burgess 0.42, FFP 0.54). For specific categories, (e.g. type B or C fractures), there was a substantial agreement between the experienced surgeons (kappa: OTA 0.64, Young and Burgess 0.62, FFP 0.68). For inexperienced observers, there was a fair agreement in all systems (kappa: OTA 0.23, Young and Burgess 0.23, FFP 0.36). CONCLUSIONS: All three classifications reach their maximum reliability with advanced expertise in the surgery of pelvic fractures. The novel FFP classification has proved to be at least equivalent when directly compared to the established systems. The FFP classification system showed substantial reliability in patients older than 60 years.

Growth of Cutibacterium acnes is common on osteosynthesis material of the shoulder in patients without signs of infection.

Background and purpose - Cutibacterium acnes, formerly known as Propionibacterium acnes, is often isolated from deep tissues of the shoulder. It is recognized as an important causative agent of foreign-material associated infections. However, the incidence and significance of its detection in tissues from patients without clinical evidence for infection is unclear. We assessed the incidence of C. acnes colonization of osteosynthesis material in asymptomatic patients, and evaluated the short-term outcome in relation to the microbiological findings. Patients and methods - We microbiologically analyzed osteosynthesis material of 34 asymptomatic patients after surgery on the clavicle. Material obtained from 19 asymptomatic patients after osteosynthesis of the fibula served as a control group. Patients were clinically followed up for 3-24 months after removal of the osteosynthesis material. Results - Bacteria were recovered from devices in 29 of 34 patients from the clavicle group. 27 of 29 positive samples grew C. acnes. Isolation of C. acnes was more common in male than in female patients. No bacterial growth was observed on foreign material from patients in the fibula group. All patients remained asymptomatic at follow-up. Interpretation - Growth of C. acnes is common on osteosynthesis material of the shoulder, especially in males. Samples were positive irrespective of clinical signs of infection. Therefore, detection of C. acnes in this clinical setting is of questionable clinical significance. The high positivity rate in asymptomatic patients discourages routine sampling of material in cases without clinical evidence for infection.

Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repair.

PURPOSE: To evaluate different stabilisation techniques for acromioclavicular (AC) joint separations, including direct AC repair, and to compare the properties of the stabilised and native joints. METHODS: An established in vitro testing model for the AC joint was used to analyse joint stability after surgical reconstruction [double TightRope (DTR), DTR with AC repair (DTR + AC), single TR with AC repair (TR + AC), and PDS sling with AC repair (PDS + AC)]. Twenty-four human cadaveric shoulders were randomised by age into four testing groups. Joint stiffness was measured by applying an axial load during defined physiological ranges of motion. Similar tests were performed for the native joints, after dissecting the coracoclavicular and AC ligaments, and after surgical reconstruction. Cyclic loading was performed for 1000 cycles with 20-70 N and vertical load to failure determined after cyclic testing. RESULTS: Axial stiffness for all TR groups was significantly higher than for the native joint (DTR 38.94 N/mm, p = 0.005; DTR + AC 37.79 N/mm, p = 0.015; TR + AC 45.61 N/mm, p < 0.001 vs. native 26.05 N/mm). The axial stiffness of the PDS + AC group was similar to that of the native joint group (21.4 N/mm, n.s.). AC repair did not significantly influence rotational stiffness. Load to failure was similar and >600 N in all groups (n.s.). CONCLUSION: Reconstruction of AC dislocations with one or two TRs leads to stable results with a higher stiffness than the native joints. For the PDS + AC group, axial stiffness was similar to the native situation, although there might be a risk of elongation. Direct AC repair showed no significantly increased stability in comparison with reconstructions without direct AC repair. Thus, a direct AC repair seems to be dispensable in clinical practice, while TRs or PDS cerclages appear to provide sufficiently stable results.

On-table decision-making in intracapsular hip fracture surgery: mid-term results of a pilot study.

INTRODUCTION: At the present time, it is generally recommended to use hip replacement in dislocated fractures to avoid failure after internal fixation. A problem is that previous research has demonstrated that observers have problems in discriminating between dislocated and undislocated fractures. A possible solution to this problem would be to use arthroplasty in the majority of the cases. However, this also means that many fractures with the potential for uneventful healing would be replaced. MATERIALS AND METHODS: In the current investigation, the mid-term outcome was recorded for patients with intracapsular hip fractures who were treated with either internal fixation or arthroplasty. A novel treatment algorithm was employed. After careful exclusion of cases with known risk factors for failure after internal fixation, a technique called on-table decision was used to identify suitable patients for internal fixation. RESULTS: A total of 72 patients with intracapsular hip fractures were studied with a median follow-up time of 12 months (IQR 8-15.25 months). Nineteen (19) patients (26 %) were excluded in the selection process, leaving 53 (74 %) for on-table decision-making. Thirty patients (42 %) were identified as suitable for internal fixation and gave anatomically stable closed reductions. Two of these patients (7 %) exhibited non-unions and one (3 %) avascular necrosis. CONCLUSIONS: The mid-term outcome after internal fixation is promising. The careful selection process may be helpful in identifying fracture patterns for which internal fixation may be considered as a safe and less invasive alternative to hip arthroplasty.

Tibial plateau fracture: does fracture classification influence the choice of surgical approach? A retrospective multicenter analysis.

PURPOSE: The role of classification systems for the choice of surgical approach and the management of tibial plateau fractures remains unclear. The purpose of this study was to investigate the potential of classification systems to choose the appropriate operative approach. Current surgical management strategies were investigated in a large multicenter assessment. METHODS: In this study, we retrospectively analyzed all patients with tibial plateau fractures that have received surgical treatment in one of the five Level I trauma facilities between 2012 and 2015. Fractures were classified in each center by a senior orthopedic surgeon using the AO/OTA and the Luo classification. Demographics, trauma mechanism, as well as the surgical approach were recorded. RESULTS: 538 patients (46.1% male, 53.9% female) were included. The anterolateral approach was used most frequently with 54.8% of all single approaches; 76.2% of all combined approaches used anterolateral as part of the approach. Combined approaches were used in 22.5% of the cases; a combination of the anterolateral and medial (10%), anterolateral, and posteromedial approach (5.8%) were used most frequently. The lowest number was found for the posterolateral (1.3%) and the combined approaches dorsal/anterolateral and medial/dorsal (1.7%, 1.1%). The AO/OTA classification showed a peak for 41.B2 (21.9%) and B3 (35.5%) fractures. Regarding the Luo classification, the dorsal column was involved in 45.7%. In contrast, only 14.7% of the surgical approaches used were able to address the dorsal tibial plateau potentially. CONCLUSION: The use of dorsal approach seems to be of minor importance than expected in daily clinical practice in this multicenter study. It was not possible to specify whether the AO/OTA or the Luo classification can reliably predict the choice of surgical approach. The operative treatment strategy of tibial plateau fractures seems to rather rely on the surgeons' experience, education, and preferences.

Determination of bone density in patients with sacral fractures via CT scan.

BACKGROUND: Gold standard to diagnose osteoporosis is standard dual-energy X-ray absorptiometry (DXA). CT is a standard diagnostic tool to detect injuries to the pelvic ring. The aim of the study was to collect information on bone density without DXA by determination of Hounsfield units (HU) in CT scans of patients with sacral fractures, to draw conclusions on the prevalence of osteoporosis in patients admitted to the investigating institution. HYPOTHESIS: Is the determination of HU in CT scans a useful method to gain more information about bone density in patients with sacral fractures? PATIENTS AND METHODS: We performed a retrospective analysis of all patients treated from 2004-2014 with sacral fractures confirmed with a CT scan. A total of 531 patients (398 female, 133 male) were included in the study. Bone density was measured with CT scans in Hounsfield units in vertebral body L5. The assessment was performed by placing a single oval over the trabecular bone in the axial view. In the sagittal plane, the correct position in the middle of the vertebral body was checked. As in previously published studies, we defined bone of less than 100 HU as osteoporotic, 100-150 HU as osteopenic and above 150 HU as normal. RESULTS: In 71.6% of the patients, bone density was reduced. Seventy-five percent of patients aged 65 or more exhibited manifest osteoporosis. With each additional year of age, bone density decreased by 2.7 Hounsfield units (p˂0.001). Female patients were predominant in the patient group with osteoporotic bone (p˂0.001). CONCLUSIONS: There is significant prevalence of reduced bone density in the investigated patient group. The methodology used in this study is an uncomplicated procedure to further assess bone quality in patients with fractures of the pelvic ring. Fractures of the posterior pelvic ring in women over 65 years with low-energy trauma are most probably osteoporotic. LEVEL OF EVIDENCE: III.

Prospective evaluation of the Eppendorf-Cologne Scale.

OBJECTIVES: Early diagnosis of traumatic brain injury and reliable prediction of outcome are essential for determining treatment strategies and allocating resources. This study re-evaluates the Eppendorf-Cologne Scale (ECS) and its predictive accuracy for outcome compared with the Glasgow Coma Scale (GCS). METHODS: A prospective cohort analysis of severely injured trauma patients registered in the Trauma Registry of the German Society for Trauma Surgery from 2012-2013 was carried out. Only directly admitted patients alive on admission with complete data on GCS, ECS and outcome in terms of survival to hospital discharge or death were included. The predictive accuracy in terms of the outcome of the ECS and the GCS was modelled using area under the receiver operating characteristic (AUROC) curve analysis. RESULTS: A total of 17 616 patients fulfilled the study inclusion criteria. The ECS outmatched the predictive accuracy of the GCS for outcome (AUROC, 0.853, 95% confidence interval, 0.831-0.854; and AUROC 0.836; 95% confidence interval, 0.825-0.848, respectively; P=0.062). An ECS score of 8 was associated with a 25-fold higher mortality compared with an ECS score of 0. Patients who had an ECS score of 8 had a 1.5-fold higher mortality compared with patients allocated a GCS score of 3. CONCLUSION: The ECS shows a higher accuracy for prediction of outcome compared with the GCS and enables further differentiation within the critical GCS 3 collective.

Determination of Femoral Neck Angle and Torsion Angle Utilizing a Novel Three-Dimensional Modeling and Analytical Technology Based on CT Datasets.

INTRODUCTION: Exact knowledge of femoral neck inclination and torsion angles is important in recognizing, understanding and treating pathologic conditions in the hip joint. However, published results vary widely between different studies, which indicates that there are persistent difficulties in carrying out exact measurements. METHODS: A three dimensional modeling and analytical technology was used for the analysis of 1070 CT datasets of skeletally mature femurs. Individual femoral neck angles and torsion angles were precisely computed, in order to establish whether gender, age, body mass index and ethnicity influence femoral neck angles and torsion angles. RESULTS: The median femoral neck angle was 122.2° (range 100.1-146.2°, IQR 117.9-125.6°). There are significant gender (female 123.0° vs. male 121.5°; p = 0.007) and ethnic (Asian 123.2° vs. Caucasian 121.9°; p = 0.0009) differences. The median femoral torsion angle was 14.2° (-23.6-48.7°, IQR 7.4-20.4°). There are significant gender differences (female 16.4° vs. male 12.1°; p = 0.0001). Femoral retroversion was found in 7.8% of the subjects. CONCLUSION: Precise femoral neck and torsion angles were obtained in over one thousand cases. Systematic deviations in measurement due to human error were eliminated by using automated high accuracy morphometric analysis. Small but significant gender and ethnic differences were found in femoral neck and torsion angles.

High incidence of osteochondral lesions after open reduction and internal fixation of displaced ankle fractures: Medium-term follow-up of 100 cases.

BACKGROUND: The incidence of osteochondral lesions (OCLs) in association with displaced ankle fractures has only been examined in two previous studies. In both studies magnetic resonance imaging (MRI) was performed prior to open reduction and internal fixation (ORIF). Because MRI may overdiagnose or overestimate the extent of OCLs in an acute trauma setting the aim of this study was to determine the incidence of OCLs after ORIF of displaced ankle fractures using MRI at medium-term follow-up, and to analyse if the severity of fracture or the clinical outcome correlates with the incidence of OCLs. PATIENTS AND METHODS: Following institutional review board approval a total of 100 patients (mean age, 41.3 years; range, 17.9-64.3 years) with a displaced ankle fracture who had undergone ORIF according to the AO principles were included in this study. The American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot score was used to quantify the clinical outcome and MR images were evaluated for OCLs of the talus and distal tibia after a mean of 34.5 months (range, 17.5-54.1 months). RESULTS: OCLs were found in 40.4% of the patients. Logistic regression revealed a significant correlation between the severity of fracture and the incidence of OCLs. Patients with a trimalleolar fracture (p=0.04) or an ankle fracture dislocation (p=0.003) had a significantly higher risk for developing an OCL compared to those with a type B fracture. Logistic regression also demonstrated a significant correlation between the clinical outcome (AOFAS score) and the incidence of OCLs (p=0.01). The risk for developing an OCL increases up to 5.6% when the AOFAS score decreases by one point. CONCLUSION: OCLs were frequently found in association with acute ankle fractures at medium-term follow-up, and the severity of fracture was associated with an increased number of OCLs. Considering the disadvantages of MRI including the high cost and limited availability, the results of this study may help to explain why anatomic surgical realignment of displaced ankle fractures may still be associated with poor clinical outcomes.

Foudroyant Course of an Extensive Clostridium septicum Gas Gangrene in a Diabetic Patient with Occult Carcinoma of the Colon.

Background. Spontaneous gas gangrene is a rare disease in which Clostridium septicum frequently can be detected. After an incubation period of 5-48 hours, a very painful swelling is accompanied by a rapidly spreading toxic-infectious clinical picture ultimately leading to septic shock and multiple organ failure. We present a case of a completely documented rare infectious disease with triage findings including initial vital signs, initial medical findings, and the emergency lab., radiological, intraoperative, histopathological, microbiological, and postmortem results. After initial diagnosis of the underlying disease, the patient has been immediately transferred to the operating theatre. The laboratory findings reflect the devastating effect of toxin α which is a toxin typically produced by C. septicum. The patient presented both an anaemia and a manifest coagulopathy as well as an onset of multiple organ failure. Despite the aggressive medical and surgical measures that have been taken, this patient could not be saved. Discussion. The case presented vividly emphasises the difficulty to identify these cases early enough to save a patient. This documentation may help health care providers to identify this life threatening disease as early as possible in future cases.

Biomechanical evaluation of 3 stabilization methods on acromioclavicular joint dislocations.

BACKGROUND: Traumatic acromioclavicular (AC) joint dislocations can be addressed with several surgical stabilization techniques. The aim of this in vitro study was to evaluate biomechanical features of the native joint compared with 3 different stabilization methods: locking hook plate (HP), TightRope (TR), and bone anchor system (AS). HYPOTHESIS: The HP provides higher stiffness than the anatomic reconstruction techniques. STUDY DESIGN: Controlled laboratory study. METHODS: A new biomechanical in vitro model of the AC joint was used to analyze joint stability after surgical repair (HP, TR, and AS). Eighteen cadaveric specimens were randomized for bone density and diameter in the midclavicle section. Joint stiffness was measured by applying an axial load and a defined physiological range of motion for internal and external rotations and upward and downward rotations. Data were recorded at 3 stages: for the native joint after dissecting the AC ligaments, directly after repair, and after axial cyclic loading (1000 cycles with 20 and 70 N at 1 Hz). To evaluate which implant mimics physiological joint properties best, axial stiffness of vertical stability was assessed in combination with rotation. Finally, static loading in the superior direction was applied until failure of the joints occurred. RESULTS: Axial stiffness of the TR and AS groups was 2-fold higher than for the HP group and the native joint (67.1, 66.1, and 22.5 N/mm, respectively; P < .004). Decreased load-to-failure rates were recorded in the HP group compared with the TR and AS groups (248.9 ± 72.7, 832.0 ± 401.4, and 538.0 ± 166.1 N, respectively). The stiffness of the rotations was not significantly different between the treatment methods but was lower in horizontal and downward rotations compared with the native state. Thus, native AC ligaments contributed a significant share to joint stiffness. CONCLUSION: The TR and AS groups demonstrated higher vertical load capacity. Compared with the TR and AS, the HP demonstrated an axial stiffness closest to the native joint. For restoring physiological properties, reconstruction of the AC ligaments may be necessary. CLINICAL RELEVANCE: The results show different biomechanical properties of the HP and anatomic reconstructions.

3D fluoroscopic navigated reaming of the glenoid for total shoulder arthroplasty (TSA).

Survival rates for total shoulder arthroplasty are critically dependent on the correct placement of the glenoid component. Especially in osteoarthritis, pathological version of the glenoid occurs frequently and has to be corrected surgically by eccentric reaming of the glenoid brim. The aim of our study was to evaluate whether eccentric reaming of the glenoid can be achieved more accurately by a novel computer assisted technique. Procedures were conducted on 10 paired human cadaveric specimens presenting glenoids with neutral version. To identify the correction potential of the navigated technique compared to the standard procedure, asymmetric reaming of the glenoid to create a version of -10° was defined as the target. In the navigated group, asymmetric reaming was guided by a 3D fluoroscopic technique. Postoperative 3D scans revealed greater accuracy for the eccentric reaming procedure in the navigated group compared to the freehand group, resulting in glenoid version of -9.8 ± 3.8° and -5.1 ± 4.1°, respectively (p < 0.05). Furthermore, deviation from preoperative planning was significantly reduced in the navigated group. These data indicate that our navigated procedure offers an excellent tool for supporting glenoid replacement in TSA.