Copper Micro-Flowers for Electrocatalytic Sensing of Nitrate Ions in Water.

The progressive increase in nitrate's (NO3-) presence in surface and groundwater enhances environmental and human health risks. The aim of this work is the fabrication and characterization of sensitive, real-time, low-cost, and portable amperometric sensors for low NO3- concentration detection in water. Copper (Cu) micro-flowers were electrodeposited on top of carbon screen-printed electrodes (SPCEs) via cyclic voltammetry (with voltage ranging from -1.0 V to 0.0 V at a scan rate of 0.1 V s-1). The obtained sensors exhibited a high catalytic activity toward the electro-reduction in NO3-, with a sensitivity of 44.71 µA/mM. They had a limit of detection of 0.87 µM and a good dynamic linear concentration range from 0.05 to 3 mM. The results were compared to spectrophotometric analysis. In addition, the devices exhibited good stability and a maximum standard deviation (RSD) of 5% after ten measurements; reproducibility, with a maximum RSD of 4%; and repeatability after 10 measurements with the RSD at only 5.63%.

Self-Assembly of TbPc2 Single-Molecule Magnets on Surface through Multiple Hydrogen Bonding.

The complexation between 2-ureido-4[1H]-pyrimidinone (UPy) and 2,7-diamido-1,8-naphthyridine (NaPy) is used to promote the mild chemisorption of a UPy-functionalized terbium(III) double decker system on a silicon surface. The adopted strategy allows the single-molecule magnet behavior of the system to be maintained unaltered on the surface.

Exclusive recognition of sarcosine in water and urine by a cavitand-functionalized silicon surface.

A supramolecular approach for the specific detection of sarcosine, recently linked to the occurrence of aggressive prostate cancer forms, has been developed. A hybrid active surface was prepared by the covalent anchoring on Si substrates of a tetraphosphonate cavitand as supramolecular receptor and it was proven able to recognize sarcosine from its nonmethylated precursor, glycine, in water and urine. The entire complexation process has been investigated in the solid state, in solution, and at the solid-liquid interface to determine and weight all the factors responsible of the observed specificity. The final outcome is a Si-based active surface capable of binding exclusively sarcosine. The complete selectivity of the cavitand-decorated surface under these stringent conditions represents a critical step forward in the use of these materials for the specific detection of sarcosine and related metabolites in biological fluids.

Cavitand-grafted silicon microcantilevers as a universal probe for illicit and designer drugs in water.

The direct, clean, and unbiased transduction of molecular recognition into a readable and reproducible response is the biggest challenge associated to the use of synthetic receptors in sensing. All possible solutions demand the mastering of molecular recognition at the solid-liquid interface as prerequisite. The socially relevant issue of screening amine-based illicit and designer drugs is addressed by nanomechanical recognition at the silicon-water interface. The methylamino moieties of different drugs are all first recognized by a single cavitand receptor through a synergistic set of weak interactions. The peculiar recognition ability of the cavitand is then transferred with high fidelity and robustness on silicon microcantilevers and harnessed to realize a nanomechanical device for label-free detection of these drugs in water.

Low latency optical-based mode tracking with machine learning deployed on FPGAs on a tokamak.

Active feedback control in magnetic confinement fusion devices is desirable to mitigate plasma instabilities and enable robust operation. Optical high-speed cameras provide a powerful, non-invasive diagnostic and can be suitable for these applications. In this study, we process high-speed camera data, at rates exceeding 100 kfps, on in situ field-programmable gate array (FPGA) hardware to track magnetohydrodynamic (MHD) mode evolution and generate control signals in real time. Our system utilizes a convolutional neural network (CNN) model, which predicts the n = 1 MHD mode amplitude and phase using camera images with better accuracy than other tested non-deep-learning-based methods. By implementing this model directly within the standard FPGA readout hardware of the high-speed camera diagnostic, our mode tracking system achieves a total trigger-to-output latency of 17.6 µs and a throughput of up to 120 kfps. This study at the High Beta Tokamak-Extended Pulse (HBT-EP) experiment demonstrates an FPGA-based high-speed camera data acquisition and processing system, enabling application in real-time machine-learning-based tokamak diagnostic and control as well as potential applications in other scientific domains.

Cavitand-functionalized porous silicon as an active surface for organophosphorus vapor detection.

This paper reports on the preparation of a porous silicon-based material covalently functionalized with cavitand receptors suited for the detection of organophosphorus vapors. Two different isomeric cavitands, both containing one acid group at the upper rim, specifically designed for covalent anchoring on silicon, were grafted on H-terminated porous silicon (PSi) by thermal hydrosilylation. The covalently functionalized surfaces and their complexation properties were characterized by combining different analytical techniques, namely X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy analysis coupled with thermal desorption experiments. Complexation experiments were performed by exposing both active surfaces and a control surface consisting of PSi functionalized with a structurally similar but inactive methylene-bridged cavitand (MeCav) to dimethyl methylphosphonate (DMMP) vapors. Comparison between active and inactive surfaces demonstrated the recognition properties of the new surfaces. Finally, the nature of the involved interactions, the energetic differences between active and inactive surfaces toward DMMP complexation, and the comparison with a true nerve gas agent (sarin) were studied by DFT modeling. The results revealed the successful grafting reaction, the specific host-guest interactions of the PSi-bonded receptors, and the reversibility of the guest complexation.

BiFeO3 films doped in the A or B sites: effects on the structural and morphological properties.

Metal-Organic Chemical Vapor Deposition (MOCVD) has been applied to the fabrication of BiFeO3 films undoped and doped with Ba or Ti on SrTiO3 (100) and YSZ (100) substrates. The films have been deposited using a multi-metal source, consisting of the Bi(phenyl)3, Fe(tmhd)3 and Ba(hfa)2 tetraglyme or Ti(tmhd)2(O-iPr)2 (phenyl = -C6H5, H-tmhd = 2,2,6,6-tetramethyl-3,5-heptandione; O-iPr = iso-propoxide; H-hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedione; tetraglyme = CH3O(CH2CH2O)4CH3) precursor mixture. The structural and morphological characterization of films has been carried out using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Chemical compositional studies have been performed by energy dispersive X-ray (EDX) analysis. Structural and morphological characterizations point to the formation of homogeneous and flat surfaces for both undoped and doped BiFeO3 films.

Molecular recognition on a cavitand-functionalized silicon surface.

A Si(100) surface featuring molecular recognition properties was obtained by covalent functionalization with a tetraphosphonate cavitand (Tiiii), able to complex positively charged species. Tiiii cavitand was grafted onto the Si by photochemical hydrosilylation together with 1-octene as a spatial spectator. The recognition properties of the Si-Tiiii surface were demonstrated through two independent analytical techniques, namely XPS and fluorescence spectroscopy, during the course of reversible complexation-guest exchange-decomplexation cycles with specifically designed ammonium and pyridinium salts. Control experiments employing a Si(100) surface functionalized with a structurally similar, but complexation inactive, tetrathiophosphonate cavitand (TSiiii) demonstrated no recognition events. This provides evidence for the complexation properties of the Si-Tiiii surface, ruling out the possibility of nonspecific interactions between the substrate and the guests. The residual Si-O(-) terminations on the surface replace the guests' original counterions, thus stabilizing the complex ion pairs. These results represent a further step toward the control of self-assembly of complex supramolecular architectures on surfaces.

Compartmentalized signal transduction by receptor tyrosine kinases.

Signal transduction through receptor tyrosine kinases is believed to occur mainly at the plasma membrane. Ligands bind to their cognate receptors and trigger autophosphorylation events, which are detected by intracellular signalling molecules. However, ligands, such as epidermal growth factor and insulin, induce the rapid internalization of their receptors into endosomes. Although this event is traditionally thought to attenuate the ligand-induced response, in this article the authors discuss an alternative scenario in which selective and regulated signal transduction from receptor tyrosine kinases occurs within the endosome.

Hybrid nickel-free graphene/porphyrin rings for photodegradation of emerging pollutants in water.

A novel hybrid photoactive material based on graphene foam (G) coupled with porphyrin-based polymers (Porph rings) was formulated by using a time-saving procedure to remove nickel from the final device. Specifically, Porph rings were spin coated onto the G platform with the double function of a visible-light photocatalyst and protective agent during nickel etching. The characterization of G-Porph rings was assessed by Scanning Electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). The novel material showed photocatalytic ability in degrading different classes of pollutants such as the herbicide 2,4 dichlorophenoxyacetic acid (2,4-D), polyethylene glycol (PEG) as an ingredient of care and health products, and also the methylene blue (MB) dye. UV-Vis spectroscopy, total organic carbon (TOC) and soft mass spectrometry techniques were used to monitor the photocatalytic process. The best performance in terms of photocatalytic efficiency was exhibited versus PEG and MB degradation. Furthermore, to determine the individual contribution of Reactive Oxygen Species (ROS) produced, free radical and hole scavenging tests were also carried out. Finally, a detailed map of the photocatalytic degradation mechanisms was proposed, reporting also the calculation of Porph rings' Highest Occupied Molecular Orbital (HOMO) and Lowest Occupied Molecular Orbital (LUMO) energy level values.

Cavitand-Decorated Silicon Columnar Nanostructures for the Surface Recognition of Volatile Nitroaromatic Compounds.

Nanocolumnar Si substrates (porous silicon (PSi)) have been functionalized with a quinoxaline-bridged (EtQxBox) cavitand in which the quinoxaline moieties are bonded to each other through four ethylendioxy bridges at the upper rim of the cavity. The receptor, which is known to selectively complex aromatic volatile organic compounds (VOCs) even in the presence of aliphatic compounds, has been covalently anchored to PSi. The larger surface area of PSi, compared to that of flat substrates, allowed one to study the recognition process of the surface-grafted receptors through different techniques: Fourier-transform infrared spectroscopy, thermal desorption, and X-ray photoelectron spectroscopy. The experiments proved that surface-grafted cavitands retain the recognition capability toward aromatic VOCs. In addition, the affinities of EtQxBox for various aromatic compounds (i.e., benzene, toluene, nitrobenzene, and p-nitrotoluene) have been studied combining density functional theory computations and thermal desorption experiments. Computational data based on the crystal structures of the complexes indicate that this cavitand possesses a higher affinity toward aromatic nitro-compounds compared to benzene and toluene, making this receptor of particular interest for the detection of explosive taggants. The results of computational studies have been validated also for the surface-grafted receptor through competitive recognition experiments. These experiments showed that EtQxBox-functionalized PSi can recognize nitrobenzene in the presence of a significant excess of aromatic vapors such as benzene (1:300) or toluene (1:100).

The quest towards epitaxial BaMgF4 thin films: exploring MOCVD as a chemical scalable approach for the deposition of complex metal fluoride films.

Conventional and Pulsed Liquid Injection MOCVD processes (C-MOCVD and PLI-MOCVD) have been explored as synthetic routes for the growth of BaMgF4 on Si (100) and single crystalline SrTiO3 (100) substrates. For the two applied approaches, the volatile, thermally stable ß-diketonate complexes Ba(hfa)2tetraglyme and Mg(hfa)2(diglyme)2(H2O)2 have been used as single precursors (C-MOCVD) or as a solution multimetal source (PLI-MOCVD). Structural characterization through X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM) analyses confirmed the formation of epitaxial BaMgF4 films on SrTiO3 substrates. Energy dispersive X-ray (EDX) analyses have been used to confirm composition and purity of deposited films. The impact of process parameters on film properties has been addressed, highlighting the strong influence of precursor ratio, deposition temperature and oxygen partial pressure on composition, microstructure and morphology of the films. Both methods appear well suited for the growth of the BaMgF4 phase, but while PLI-MOCVD yields a more straightforward control of the precursor composition that reflects on film stoichiometry, C-MOCVD provides easier control of the degree of texturing as a function of temperature.

Metal-Organic Chemical Vapor Deposition (MOCVD) Synthesis of Heteroepitaxial Pr0.7Ca0.3MnO3 Films: Effects of Processing Conditions on Structural/Morphological and Functional Properties.

Calcium-doped praseodymium manganite films (Pr0.7Ca0.3MnO3, PCMO) were prepared by metal-organic chemical vapor deposition (MOCVD) on SrTiO3 (001) and SrTiO3 (110) single-crystal substrates. Structural characterization through X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM) analyses confirmed the formation of epitaxial PCMO phase films. Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) characterization was used to confirm lateral and vertical composition and the purity of the deposited films. Magnetic measurements, obtained in zero-field-cooling (ZFC) and field-cooling (FC) modes, provided evidence of the presence of a ferromagnetic (FM) transition temperature, which was correlated to the transport properties of the film. The functional properties of the deposited films, combined with the structural and chemical characterization collected data, indicate that the MOCVD approach represents a suitable route for the growth of pure, good quality PCMO for the fabrication of novel spintronic devices.

Effect of rhTNF-alpha injection into rat sciatic nerve.

To assess whether TNF-alpha causes inflammatory demyelination or axonal degeneration, we injected into rat sciatic nerve saline, 100 U and 1000 U of rhTNF-alpha and studied the electrophysiological and pathological effects. At day 1 electrophysiology showed a slight reduction of proximal compound muscle action potential amplitude and pathology showed edema, inflammatory infiltration of vessel walls and endoneurium only in nerves injected with 1000 U of rhTNF-alpha. At day 5, there was no demyelination and a percentage of degenerated fibers similar in the three groups. To study the blood-nerve barrier, fluorescein isothiocyanate-labelled albumin was given intravenously after intraneural injection. The nerves injected with 1000 U rhTNF-alpha showed a leakage of the tracer in the endoneurium. TNF-alpha does not appear, at the doses used, to have myelinotoxic or axonopathic properties. The electrophysiological effect at day 1 may be due to mechanical compression of nerve fibers as a result of the blood-nerve barrier damage with consequent endoneurial edema.

Search for direct CP violation in nonleptonic decays of charged Xi and lambda hyperons

A search for direct CP violation in the nonleptonic decays of hyperons has been performed. In comparing the product of the decay parameters, alpha(Xi)alpha(Lambda), in terms of an asymmetry parameter, A(XiLambda), between hyperons and antihyperons in the charged Xi-->Lambdapi and Lambda-->ppi decay sequence, we found no evidence of direct CP violation. The parameter A(XiLambda) was measured to be 0.012+/-0.014.

A G1 cell cycle arrest induced by ligands of the reovirus type 3 receptor is secondary to inactivation of p21ras and mitogen-activated protein kinase.

The reovirus type 3 S1 gene product (type 3 hemagglutinin; HA3) is the viral protein responsible for binding to a mammalian cell-surface receptor. It has been shown that HA3 binding to its receptor inhibits cell growth, even in the continuous presence of serum mitogens. Here, receptor-mediated signal transduction leading to growth arrest was studied after binding with synthetic or recombinant ligands in the absence of viral infection. Receptor ligation caused rapid inactivation of p21(ras), a decrease in Raf phosphorylation and in mitogen-activated protein kinase (MAPK) enzymatic activity, and G1 cell cycle arrest. Transfection and expression of constitutively active v-Has-ras prevented the G1 arrest, indicating that inactivation of p21(ras) is causative. Interestingly, v-Has-ras expression also decreased the efficiency of reoviridae replication, suggesting that inactivation of p21(ras) signals is required at some step of the viral cycle. This study may define new mechanisms regulating cell growth and support the approach of using viral proteins to identify and study cellular receptors. Synthetic receptor ligands with antiproliferative properties may be useful in drug development with the aim of blocking mitosis.

Benign monomelic amyotrophies of upper and lower limb are not associated to deletions of survival motor neuron gene.

Benign monomelic amyotrophies (BMAs) are rare conditions in which neurogenic atrophy is restricted either to the upper or lower limb. BMAs are usually sporadic, have insidious onset and slow progression followed by stabilization, are clinically confined for many years to a single limb and lack of sensory, bulbar, and pyramidal signs. Although the aetiology and pathogenesis of BMAs are unknown they are considered variants of spinal muscular atrophy with focal emphasis and a benign course. We studied 7 patients with BMAs to investigate whether they present alterations of the survival motor neuron gene (SMN) which has been found deleted or disrupted in proximal spinal muscular atrophy. All 7 patients showed the presence of both exon 7 and 8 of SMN gene. These findings indicate that deletions at the SMN locus are not present in BMA of upper and lower limb and suggest that these disorders are not only clinically but also genetically separate entities from proximal spinal muscular atrophies.

Acute motor axonal neuropathy with high titer IgG and IgA anti-GD1a antibodies following Campylobacter enteritis.

We describe the first two European cases of acute axonal motor neuropathy with both IgG and IgA anti-GD1a antibodies following Campylobacter enteritis. Both patients acutely developed severe weakness without sensory involvement, had antibodies to Campylobacter jejuni and polyclonal IgG and IgA titers > or = 12,800 to GD1a at onset, which decreased during follow-up. Serial electrophysiologic studies showed: 1, normal or only slightly slowed motor conductions; 2, evidence of a progressive loss of excitability and conduction failure in nerve fibers undergoing axonal degeneration in intermediate nerve segments and evidence of distal axonal involvement in one nerve; 3, normal sensory conductions, sensory potential amplitudes and somatosensory evoked potentials. Although we cannot exclude that axonal degeneration followed demyelination, we think that anti-GD1a antibodies account for the axonal involvement because GD1a is present in the axolemma and exposed at the node of Ranvier and in nerve terminals. The exclusive motor involvement could be explained by the fact that GD1a has a different internal structure in motor and sensory fibers.

Endosomes, receptor tyrosine kinase internalization and signal transduction.

Upon the binding of insulin or epidermal growth factor to their cognate receptors on the liver parenchymal plasmalemma, signal transduction and receptor internalization are near co-incident. Indeed, the rapidity and extent of ligand mediated receptor internalization into endosomes in liver as well as other organs predicts that signal transduction is regulated at this intracellular locus. Although internalization has been thought as a mechanism to attenuate ligand mediated signal transduction responses, detailed studies of internalized receptors in isolated liver endosomes suggest an alternative scenario whereby selective signal transduction pathways can be accessed at this locus.

Comparative photodegradation studies on 3-hydroxyflavone: influence of different media, pH and light sources.

3-Hydroxyflavone (3-OH-F) photochemistry in solution has been rationalized in terms of an excited state intramolecular proton transfer (ESIPT), which involves the free 3-hydroxy group interacting with the ortho-carbonyl. This photo-rearrangement occurs rapidly and is strongly influenced by the physico-chemical properties of the solvent, which plays an essential role in determining whether a photo-oxidation or a photo-induced molecular rearrangement takes place. 3-OH-F photoreactivity has been deeply investigated and the related mechanisms elucidated, as affected by various solvents, pH values and irradiation wavelengths, leading to different photodegradation rates and pathways. Moreover, the influence of molecular encapsulation upon alpha- and beta-cyclodextrins (alpha- and beta-CyD) on the molecule photoreactivity has been examined, as a potential tool for increasing molecule photostability as well as minimizing photoinduced toxic effects on biosubstrates.