Comparative evaluation of surface-modified zirconia for the growth of bone cells and early osseointegration.

STATEMENT OF PROBLEM: Rapid osseointegration between implant and bone tissue for early loading of a prosthesis with sufficient primary stability depends on the surface characteristics of the implant. The development and characterization of suitable surface coatings on dental implants is a major challenge. PURPOSE: The purpose of this in vitro study was to evaluate and compare the osteogenic potential and cytotoxicity of unmodified zirconia, acid-etched zirconia, bioactive glass-coated zirconia, and tamarind kernel polysaccharide with hydrophilic acrylic acid (TKP-AA) hydrogel-coated zirconia. MATERIAL AND METHODS: Thirty-six disks each of unmodified zirconia, acid-etched, 45S5 bioactive glass-coated, and TKP-AA hydrogel-coated zirconia were evaluated for osteogenic potential and cytotoxic effect by using human osteoblast Saos-2 cells. The surface topography of the disks and the morphology of the cells grown on these surfaces were examined by scanning electron microscopy (n=3). The cell attachment was evaluated by confocal imaging (n=3). The cytotoxic effect was evaluated by cell viability assay (n=9). Osteoblast maturation was assessed by alkaline phosphatase assay (n=9) and cell mineralization by alizarin red staining (n=9). ANOVA and Bonferroni multiple comparison post hoc tests were used to evaluate the statistical significance of the intergroup differences in these characteristics (α=.05). RESULTS: The surface modifications resulted in distinct changes in the surface morphology of zirconia disks and the growth of Saos-2 cells. Zirconia disks coated with TKP-AA promoted higher proliferation of osteoblasts compared with unmodified disks (P<.001). Similarly, the surface modifications significantly increased the differentiation of mesenchymal stem cells to osteoblasts as compared with uncoated zirconia (P<.001). However, the rate of differentiation to osteoblasts was similar among the surface modifications. Acid-etched and TKP-AA-coated disks promoted mineralization of osteoblasts to the same extent, except bioactive glass coating, which significantly increased the rate of mineralization (P<.001). CONCLUSIONS: Surface modification of zirconia by acid etching and coating with Bioglass or TKP-AA hydrogel resulted in the improved growth and differentiation of osteoblasts. TKP-AA hydrogel coating promoted the proliferation of osteoblasts, whereas Bioglass coating showed better mineralization. TKP-AA hydrogel coating is a promising candidate for improving the osseointegration of dental implants that warrants further investigation.

P-type ß-MoO2 nanostructures on n-Si by hydrogenation process: synthesis and application towards self-biased UV-visible photodetection.

We report on the synthesis and UV-vis photodetection application of p-type MoO2 nanostructures (NSs) on Si substrate. ß-MoO2 NSs have been synthesized from previously grown α-MoO3 structures/n-type Si via a hydrogenation process at 450 °C. After hydrogenation, the α-MoO3 structures were completely converted into ß-MoO2 NSs without the presence of sub-oxidized phases of molybdenum oxide. The as-grown NSs exhibited very good p-type electrical conductivity of ≈2.02 × 103 S-cm-1 with hole mobility of ≈7.8 ± 1.3 cm2-V-1-Sec-1. To explore optoelectronic properties of p-type ß-MoO2 NSs, we have fabricated a p-MoO2/n-Si heterojunction photodetector device with Au as the top and Al as the bottom contacts. The device exhibits peak photoresponsivity of ≈0.155 A W-1 with maximum detectivity ≈1.28 × 1011 cm-Hz1/2-W-1 and 44% external quantum efficiency around ≈436 nm, following the highest photoresponse (I ph/I d ≈ 6.4 × 102) and good response speed (rise time ∼29 ms and decay time ∼38 ms) at -1.5 V. Importantly, this device also shows good self-powered high-speed (rise time ∼47 ms and decay time ∼70 ms) photodetection performance with peak responsivity and detectivity of ≈45 mA W-1 and ≈4.05 × 1010 cm-Hz1/2-W-1, respectively. This broadband UV-visible light detection feature can be attributed to the coordinated effects of MoO2 band-edge absorption, interfacial defects and self absorption in Si. The photodetection behavior of the device has been understood by proposed energy-band diagrams with the help of an experimentally derived work function, band gap and valence band maximum position of MoO2 NSs.

Facile Synthesis of Semiconducting Ultrathin Layer of Molybdenum Disulfide.

In this paper, we have reported a simple and efficient method for the synthesis of uniform, highly conducting single or few layer molybdenum disulfide (MoS2) on large scale. Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM) have been used for the confirmation of mono or few layered nature of the as-synthesized MoS2 sheets. X-ray Photoelectron Spectroscopy (XPS), X-Ray Diffraction (XRD) and Raman Spectroscopy have also been used to study the elemental, phase, and molecular composition of the sample. Optical properties of as-synthesized sample have been probed by measuring absorption and photoluminescence spectra which also compliment the formation of mono and few layers MoS2 Current-voltage (I-V ) characteristics of as-synthesized sample in the pellet form reveal that MoS2 sheets have an ohmic character and found to be highly conducting. Besides characterizing the as-synthesized sample, we have also proposed the mechanism and factors which play a decisive role in formation of high quality MoS2 sheets.

Ag nanoparticle decorated molybdenum oxide structures: growth, characterization, DFT studies and their application to enhanced field emission.

We report a simple single step growth of α-MoO3 structures and energetically suitable site specific Ag nanoparticle (NP) decorated α-MoO3 structures on varied substrates, having almost similar morphologies and oxygen vacancies. We elucidate possible growth mechanisms in light of experimental findings and density functional theory (DFT) calculations. We experimentally establish and verified by DFT calculations that the MoO3(010) surface is a weakly interacting and stable surface compared to other orientations. From DFT study, the binding energy is found to be higher for (100) and (001) surfaces (∼-0.98 eV), compared to the (010) surface (∼-0.15 eV) and thus it is likely that Ag NP formation is not favorable on the MoO3(010) surface. The Ag decorated MoO3 (Ag-MoO3) nanostructured sample shows enhanced field emission properties with an approimately 2.1 times lower turn-on voltage of 1.67 V µm-1 and one order higher field enhancement factor (ß) of 8.6 × 104 compared to the MoO3 sample without Ag incorporation. From Kelvin probe force microscopy measurements, the average local work function (Φ) is found to be approximately 0.47 eV smaller for the Ag-MoO3 sample (∼5.70 ± 0.05 eV) compared to the MoO3 sample (∼6.17 ± 0.05 eV) and the reduction in Φ can be attributed to the shifting Fermi level of MoO3 toward vacuum via electron injection from Ag NPs to MoO3. The presence of oxygen vacancies together with Ag NPs lead to the highest ß and lowest turn-on field among the reported values under the MoO3 emitter category.

Tuning the work function of randomly oriented ZnO nanostructures by capping with faceted Au nanostructure and oxygen defects: enhanced field emission experiments and DFT studies.

The lowering of the work function (Φ) can lead to a better field emission (FE) behavior at lower threshold fields. We report on enhanced FE from randomly oriented and faceted Au-capped ZnO hetero-nanostructures (HNs) having more oxygen defects. Large-area arrays of non-aligned, faceted Au-capped ZnO HNs, such as nanowires (NWs) and triangular nanoflakes (TNFs) are grown using the chemical vapor deposition (CVD) method. Enhanced FE properties from the TNF sample resulted in a turn-on field as low as 0.52 V µm(-1) at a current density of 0.1 mA cm(-2) and a field enhancement factor (ß) as high as ≈5.16 × 10(5). Under similar experimental conditions, drawing the same current density from an NW specimen needs a higher turn-on field (0.86 V µm(-1)) and to exhibit nearly four times less field enhancement factor compared to the TNFs samples. X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) measurements confirm the presence of more oxygen defects in the TNF samples compared to the NW samples. Kelvin probe force microscopy (KPFM) measurements show the average local work function to be 4.70 ± 0.1 eV for the TNF sample, which is ≈ 0.34 eV lower than the NW sample. Using density functional theory (DFT) calculations, the estimated Φ values are found to be 4.98 eV for ZnO(0001), 4.17 eV for Au(001)/ZnO(0001) and 3.91 eV for Au(001)/Ovac-ZnO(0001) surfaces. The DFT results are qualitatively in agreement with our experimental results. The presence of Au nanostructures on top of O-deficient and sharp-tipped TNFs results in enhanced FE performance following their reduced tunneling barrier via pinning of effective Φ.

Evaluation of Osteogenic Potential of a Polysaccharide-Based Hydrogel Coating on Titanium.

INTRODUCTION: Reducing the healing period after surgical placement of dental implants can facilitate the loading of dental prostheses. AIM: The aim is to compare the osteogenic potential of unmodified titanium disks with titanium disks that were surface-modified or hydrogel-coated. MATERIALS AND METHODOLOGY: One hundred eight titanium disks (Ø6 × 2-mm) were divided into three groups: (1) unmodified titanium as control (Ti-C); (2) sandblasted and acid-etched (Ti-SLA), and (3) coated with tamarind kernel polysaccharide hydrogel grafted with acrylic acid (Ti-TKP-AA). The osteogenic potential and cytotoxic effect of various groups of titanium were compared using human osteoblasts Saos-2. The surface topography of the titanium disks and morphology of osteoblasts grown on disks were investigated by scanning electron microscopy (n = 3). Cell attachment to the disks and actin expression intensity were investigated by confocal imaging (n = 3). Cytotoxicity was quantified by cell viability assay (n = 9). Osteoblast maturation was determined by alkaline phosphatase assay (n = 9). Cell mineralization was quantified by Alizarin red staining (n = 9). One-way analysis of variance followed by Tukey's multiple comparisons test was used for intergroup comparisons (α= 0.05). RESULTS: The surface modifications on Ti-SLA and Ti-TKP-AA support better morphology and proliferation of osteoblasts than Ti-C (P< 0.001) and significantly higher levels of actin cytoskeleton accumulation (P< 0.0001). Ti-TKP-AA showed a significantly higher maturation rate than Ti-C (P< 0.001). Ti-TKP-AA showed > twofold increased mineralization than Ti-C and Ti-SLA (P< 0.001). CONCLUSIONS: TKP-AA hydrogel-coated titanium promotes faster osteoblast proliferation, maturation, and mineralization than SLA-treated or untreated titanium. These advantages can be explored for achieving early osseointegration and prosthetic loading of titanium dental implants.

Dimension- and position-controlled growth of GaN microstructure arrays on graphene films for flexible device applications.

This paper describes the fabrication process and characteristics of dimension- and position-controlled gallium nitride (GaN) microstructure arrays grown on graphene films and their quantum structures for use in flexible light-emitting device applications. The characteristics of dimension- and position-controlled growth, which is crucial to fabricate high-performance electronic and optoelectronic devices, were investigated using scanning and transmission electron microscopes and power-dependent photoluminescence spectroscopy measurements. Among the GaN microstructures, GaN microrods exhibited excellent photoluminescence characteristics including room-temperature stimulated emission, which is especially useful for optoelectronic device applications. As one of the device applications of the position-controlled GaN microrod arrays, we fabricated light-emitting diodes (LEDs) by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells (MQWs) and a p-type GaN layer on the surfaces of GaN microrods and by depositing Ti/Au and Ni/Au metal layers to prepare n-type and p-type ohmic contacts, respectively. Furthermore, the GaN microrod LED arrays were transferred onto Cu foil by using the chemical lift-off method. Even after being transferred onto the flexible Cu foil substrate, the microrod LEDs exhibited strong emission of visible blue light. The proposed method to enable the dimension- and position-controlled growth of GaN microstructures on graphene films can likely be used to fabricate other high-quality flexible inorganic semiconductor devices such as micro-LED displays with an ultrahigh resolution.

Carbohydrate-Coated Gold-Silver Nanoparticles for Efficient Elimination of Multidrug Resistant Bacteria and in Vivo Wound Healing.

Multidrug resistant (MDR) bacteria have emerged as a major clinical challenge. The unavailability of effective antibiotics has necessitated the use of emerging nanoparticles as alternatives. In this work, we have developed carbohydrate-coated bimetallic nanoparticles (Au-AgNP, 30-40 nm diameter) that are nontoxic toward mammalian cells yet highly effective against MDR strains as compared to their monometallic counterparts (Ag-NP, Au-NP). The Au-AgNP is much more effective against Gram-negative MDR Escherichia coli and Enterobacter cloacae when compared to most of the potent antibiotics. We demonstrate that in vivo, Au-AgNP is at least 11000 times more effective than Gentamicin in eliminating MDR Methicillin Resistant Staphylococcus aureus (MRSA) infecting mice skin wounds. Au-AgNP is able to heal and regenerate infected wounds faster and in scar-free manner. In vivo results show that this Au-AgNP is very effective antibacterial agent against MDR strains and does not produce adverse toxicity. We conclude that this bimetallic nanoparticle can be safe in complete skin regeneration in bacteria infected wounds.

Electrodeposition of nanowires of a high copper content thiourea precursor of copper sulfide.

Copper thiourea complexes are an important material class for application as a precursor of copper sulfide nanocrystals with potential use in solar cells, optoelectronics, medicine, etc. They represent a type of single source precursor, comprising both copper and sulfur in one chemical compound, whose tunable stoichiometry and morphology enable control of the quality and properties of the synthesized copper sulfide nanocrystals. Here, we present a template free electrochemical route to prepare nanowires of copper thiourea (tu) chloride hemihydrate ([Cu(tu)]Cl·½H2O) by pulse deposition. We proposed the model of the growth of nanowires. We also demonstrate complete transformation from the precursor to copper sulfide nanowire by heating it to 180 °C that involves 20% volume loss due to the decomposition of organic constituents; the obtained nanowires have around 38% covellite (CuS) and 62% digenite (Cu1.8S) phases. Electrochemistry offers the advantage of spatially selected deposition e.g. in the active regions of a device.

Capping Layer (CL) Induced Antidamping in CL/Py/ß-W System (CL: Al, ß-Ta, Cu, ß-W).

For achieving ultrafast switching speed and minimizing dissipation losses, the spin-based data storage device requires a control on effective damping (αeff) of nanomagnetic bits. Incorporation of interfacial antidamping spin orbit torque (SOT) in spintronic devices therefore has high prospects for enhancing their performance efficiency. Clear evidence of such an interfacial antidamping is found in Al capped Py(15 nm)/ß-W(tW)/Si (Py = Ni81Fe19 and tW = thickness of ß-W), which is in contrast to the increase of αeff (i.e., damping) usually associated with spin pumping as seen in Py(15 nm)/ß-W(tW)/Si system. Because of spin pumping, the interfacial spin mixing conductance (g↑↓) at Py/ß-W interface and spin diffusion length (λSD) of ß-W are found to be 1.63(±0.02) × 1018 m-2 (1.44(±0.02) × 1018 m-2) and 1.42(±0.19) nm (1.00(±0.10) nm) for Py(15 nm)/ß-W(tW)/Si (ß-W(tW)/Py(15 nm)/Si) bilayer systems. Other different nonmagnetic capping layers (CL), namely, ß-W(2 nm), Cu(2 nm), and ß-Ta(2,3,4 nm) were also grown over the same Py(15 nm)/ß-W(tW). However, antidamping is seen only in ß-Ta(2,3 nm)/Py(15 nm)/ß-W(tW)/Si. This decrease in αeff is attributed to the interfacial Rashba like SOT generated by nonequilibrium spin accumulation subsequent to the spin pumping. Contrary to this, when interlayer positions of Py(15 nm) and ß-W(tW) is interchanged irrespective of the fixed top nonmagnetic layer, an increase of αeff is observed, which is ascribed to spin pumping from Py to ß-W layer.

Highly Active 2D Layered MoS 2 -rGO Hybrids for Energy Conversion and Storage Applications.

The development of efficient materials for the generation and storage of renewable energy is now an urgent task for future energy demand. In this report, molybdenum disulphide hollow sphere (MoS2-HS) and its reduced graphene oxide hybrid (rGO/MoS2-S) have been synthesized and explored for energy generation and storage applications. The surface morphology, crystallinity and elemental composition of the as-synthesized materials have been thoroughly analysed. Inspired by the fascinating morphology of the MoS2-HS and rGO/MoS2-S materials, the electrochemical performance towards hydrogen evolution and supercapacitor has been demonstrated. The rGO/MoS2-S shows enhanced gravimetric capacitance values (318 ± 14 Fg-1) with higher specific energy/power outputs (44.1 ± 2.1 Whkg-1 and 159.16 ± 7.0 Wkg-1) and better cyclic performances (82 ± 0.95% even after 5000 cycles). Further, a prototype of the supercapacitor in a coin cell configuration has been fabricated and demonstrated towards powering a LED. The unique balance of exposed edge site and electrical conductivity of rGO/MoS2-S shows remarkably superior HER performances with lower onset over potential (0.16 ± 0.05 V), lower Tafel slope (75 ± 4 mVdec-1), higher exchange current density (0.072 ± 0.023 mAcm-2) and higher TOF (1.47 ± 0.085 s-1) values. The dual performance of the rGO/MoS2-S substantiates the promising application for hydrogen generation and supercapacitor application of interest.

Simple Growth of Faceted Au-ZnO Hetero-nanostructures on Silicon Substrates (Nanowires and Triangular Nanoflakes): A Shape and Defect Driven Enhanced Photocatalytic Performance under Visible Light.

A simple single-step chemical vapor deposition (CVD) method has been used to grow the faceted Au-ZnO hetero-nanostructures (HNs) either with nanowires (NWs) or with triangular nanoflakes (TNFs) on crystalline silicon wafers with varying oxygen defect density in ZnO nanostructures. This work reports on the use of these nanostructures on substrates for photodegradation of rhodamine B (RhB) dyes and phenol under the visible light illumination. The photoluminescence measurements showed a substantial enhancement in the ratio of defect emission to band-edge emission for TNF (ratio ≈ 7) compared to NW structures (ratio ≤ 0.4), attributed to the presence of more oxygen defects in TNF sample. The TNF structures showed 1 order of magnitude enhancement in photocurrent density and an order of magnitude less charge-transfer resistance (R(ct)) compared to NWs resulting high-performance photocatalytic activity. The TNFs show enhanced photocatalytic performance compared to NWs. The observed rate constant for RhB degradation with TNF samples is 0.0305 min(-1), which is ≈5.3 times higher compared to NWs case with 0.0058 min(-1). A comparison has been made with bulk ZnO powders and ZnO nanostructures without Au to deduce the effect of plasmonic nanoparticles (Au) and the shape of ZnO in photocatalytic performance. The results reveal the enhanced photocatalytic capability for the triangular nanoflakes of ZnO toward RhB degradation with good reusability that can be attracted for practical applications.