RESUMO
Electrochemical water-splitting to produce hydrogen is potential to substitute the traditional industrial coal gasification, but the oxygen evolution kinetics at the anode remains sluggish. In this paper, sea urchin-like Fe doped Ni3S2 catalyst growing on nickel foam (NF) substrate is constructed via a simple two-step strategy, including surface iron activation and post sulfuration process. The NF-Fe-Ni3S2 obtains at temperature of 130 °C (NF-Fe-Ni3S2-130) features nanoneedle-like arrays which are vertically grown on the particles to form sea urchin-like morphology, features high electrochemical surface area. As oxygen evolution catalyst, NF-Fe-Ni3S2-130 exhibits excellent oxygen evolution activities, fast reaction kinetics, and superior reaction stability. The excellent OER performance of sea urchin-like NF-Fe-Ni3S2-130 is mainly ascribed to the high-vertically dispersive of nanoneedles and the existing Fe dopants, which obviously improved the reaction kinetics and the intrinsic catalytic properties. The simple preparation strategy is conducive to establish high-electrochemical-interface catalysts, which shows great potential in renewable energy conversion.
RESUMO
Photodetectors based on intrinsic graphene can operate over a broad wavelength range with ultrafast response, but their responsivity is much lower than commercial silicon photodiodes. The combination of graphene with two-dimensional (2D) semiconductors may enhance the light absorption, but there is still a cutoff wavelength originating from the bandgap of semiconductors. Here, we report a highly responsive broadband photodetector based on the heterostructure of graphene and transition metal carbides (TMCs, more specifically Mo2C). The graphene-Mo2C heterostructure enhanced light absorption over a broad wavelength range from ultraviolet to infrared. In addition, there is very small resistance for photoexcited carriers in both graphene and Mo2C. Consequently, photodetectors based on the graphene-Mo2C heterostructure deliver a very high responsivity from visible to infrared telecommunication wavelengths.
RESUMO
Defects are generally considered to be effective and flexible in the catalytic reactions of lithium-sulfur batteries. However, the influence of the defect concentration on catalysis remains ambiguous. In this work, molybdenum sulfide with different sulfur vacancy concentrations is comprehensively modulated, showing that the defect level and the adsorption-catalytic performance result in a volcano relationship. Moreover, density functional theory and in situ experiments reveal that the optimal level of sulfur defects can effectively increase the binding energy between molybdenum sulfide and lithium polysulfides (LiPSs), lower the energy barrier of the LiPS conversion reaction, and promote the kinetics of Li2S bidirectional catalytic reaction. The lower bidirectional catalytic performance incited by excessive or deficient sulfur defects is mainly due to the deformed geometrical structures and reduced adsorption of key LiPSs on the catalyst surface. This work underscores the imperative of controlling the defect content and provides a potential approach to the commercialization of lithium-sulfur batteries.
RESUMO
Black arsenic-phosphorus (b-AsP), an alloy containing black phosphorus and arsenic in the form of b-AsxP1-x, has a broadly tunable band gap changing with the chemical ratios of As and P. Although mid-infrared photodetectors and mode-locked or Q-switched pulse lasers based on b-AsP (mostly b-As0.83P0.17) are investigated, the potential of this family of materials for near-infrared photonic and optoelectronic applications at telecommunication bands is not fully explored. Here, we have verified a multifunctional fiber device based on b-As0.4P0.6 nanosheets for highly responsive photodetection and dual-wavelength ultrafast pulse generation at around 1550 nm. The fiber laser with a saturable absorber (SA) based on b-As0.4P0.6 nanosheets can output dual-wavelength mode-locking pulses with a larger bandwidth and spectral separation than those based on other two-dimensional (2D) materials. Remarkably, it is found that the b-As0.4P0.6-based photodetector can achieve a high responsivity of 10,200 A/W at 1550 nm and a peak responsivity of 2.29 × 105 A/W at 980 nm. Our work suggests that b-As0.4P0.6 shows great potential in ultrafast photonics, dual-comb spectroscopy, and infrared signal detection.
RESUMO
It is challenging to develop highly efficient and stable multifunctional electrocatalysts for improving the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the oxygen reduction reaction (ORR) for sustainable energy conversion and storage systems such as water-alkali electrolyzers (WAEs) and hybrid sodium-air batteries (HSABs). In this work, sub-nm Pt nanoclusters (NCs) on defective NiFe layered double hydroxide nanosheets (NixFe LDHs) are synthesized by a facile electrodeposition method. Due to the synergistic effect between Pt NCs and abundant atomic M(II) defects, along with hierarchical porous nanostructures, the Pt/NixFe LDHs catalysts exhibit superior trifunctional electrocatalytic activity and durability toward the HER/OER/ORR. A WAE fabricated with Pt/NixFe LDHs electrodes needs 1.47 V to reach a current density of 10 mA cm-2, much lower than that of the mixed 20% Pt/C and 20% Ir/C catalysts. An HSAB assembled by Pt/NixFe LDHs as a binder-free air cathode displays a high open-circuit voltage, a narrow overpotential gap, and remarkable rechargeability. This work provides a feasible strategy for constructing freestanding efficient trifunctional electrocatalysts for sustainable energy conversion and storage systems.
RESUMO
Si-based electrodes offer exceptionally high capacity and energy density for lithium-ion batteries (LIBs),but suffer from poor structural stability and electrical conductivity that hamper their practical applications. To tackle these obstacles, we design a C/polymer bilayer coating deposited on Si-SiOx microparticles. The inner C coating is used to improve electrical conductivity. The outer C-nanoparticle-reinforced polypyrrole (CNP-PPy) is a polymer matrix composite that can minimize the volumetric expansion of Si-SiOx and enhance its structural stability during battery operation. Electrodes made of such robust Si-SiOx@C/CNP-PPy microparticles exhibit excellent cycling performance: 83% capacity retention (794 mAh g-1) at a 2 C rate after more than 900 cycles for a coin-type half cell, and 80% capacity retention (with initial energy density of 308 Wh kg-1) after over 1100 cycles for a pouch-type full cell. By comparing the samples with different coatings, an in-depth understanding of the performance enhancement is achieved, i.e., the C/CNP-PPy with cross-link bondings formed in the bilayer coating plays a key role for the improved structural stability. Moreover, a full battery using the Si-SiOx@C/CNP-PPy electrode successfully drives a car model, demonstrating a bright application prospect of the C/polymer bilayer coating strategy to make future commercial LIBs with high stability and energy density.
RESUMO
Heteroatom doping, especially dual-doped carbon materials have attracted much attention for the past few years, and have been regarded as one of the most efficient strategies to enhance the capacitance behavior of porous carbon materials. In this work, a facile two-step synthetic route was developed to fabricate nitrogen and sulfur co-doped carbon microsphere (NSCM) by using thiourea as dopant. The N/S doping content is controlled via varying the carbonization temperature. It has been proved that a suitable quantity of N and S groups could not only provide pseudo-capacitance but also promote the electron transfer for carbon materials, which ensures the further utilization of the exposed surfaces for charge storage. The optimized NSCM prepared at a carbonization temperature of 800°C (NSCM-800) achieves a capacitance of 277.1Fg-1 at a current density of 0.3Ag-1 in 6.0molL-1 KOH electrolyte, which is 71% higher than that of undoped carbon microsphere. Besides, NSCM-800 shows an excellent cycling stability, 98.2% of the initial capacitance is retained after 5,000 cycles at a current density of 3.0Ag-1.
RESUMO
Effective electrocatalysts for the hydrogen evolution reaction (HER) in alkaline electrolytes can be developed via a simple solvothermal process. In this work, first, the prepared CoMoS nanomaterials through solvothermal treatment have a porous, defect-rich, and vertically aligned nanostructure, which is beneficial for the HER in an alkaline medium. Second, electron transfer from cobalt to MoS2 that reduces the unoccupied d orbitals of molybdenum can also enhance the HER kinetics in an alkaline medium. This has been demonstrated via a comparison of the catalytic performances of CoMoS, CoS, and MoS2. Third, the solvothermal treatment time evidently impacts the electrocatalytic activity. As a result, after 24 h of solvothermal treatment, the prepared CoMoS nanomaterials exhibit the lowest onset potential (42 mV) and overpotential (98 mV) for delivering a current density of 10 mA cm-2 in a 1 M KOH solution. Thus, this study provides a simple method to prepare efficient electrocatalysts for the HER in an alkaline medium.