Centrifugal Assembly of Helical Bijel Fibers for pH Responsive Composite Hydrogels.

In microfluidics, centrifugal forces are important for centrifugal microfluidic chips and curved microchannels. Here, an unrecognized use of the centrifugal effect in microfluidics is introduced. The assembly of helical soft matter fibers in a rotating microcapillary is investigated. During assembly, the fibers undergo phase separation, generating particle stabilized bicontinuous interfacially jammed emulsions gels. This process is accompanied by a transition of the fiber density over time. As a result, the direction of the centrifugal force in the rotating microcapillary changes. The authors analyze this effect systematically with high-speed video microscopy and complementary computer simulations. The resulting understanding enables the control of the helical fiber assembly into microropes. These microropes can be converted into pH responsive hydrogels that swell and shrink with potential applications in tissue engineering, soft robotics, controlled release, and sensing. More generally, the knowledge gained from this work shows that centrifugal forces potentially enable directed self-assembly or separation of colloids, biological cells, and emulsions in microfluidics.

Stabilizing liquid drops in nonequilibrium shapes by the interfacial crosslinking of nanoparticles.

Droplets are spherical due to the principle of interfacial energy minimization. Here, we show that nonequilibrium droplet shapes can be stabilized via the interfacial self-assembly and crosslinking of nanoparticles. This principle allows for the stability of practically infinitely long liquid tubules and monodisperse cylindrical droplets. Droplets of oil-in-water are elongated via gravitational or hydrodynamic forces at a reduced interfacial tension. Silica nanoparticles self-assemble and cross-link on the interface triggered by the synergistic surface modification with hexyltrimethylammonium- and trivalent lanthanum-cations. The droplet length dependence is described by a scaling relationship and the rate of nanoparticle deposition on the droplets is estimated. Our approach potentially enables the 3D-printing of Newtonian Fluids, broadening the array of material options for additive manufacturing techniques.

Templating Interfacial Nanoparticle Assemblies via in Situ Techniques.

In situ surface modification of nanoparticles has a rich industrial history, but in recent years, it has also received increased attention in the field of directed self-assembly. In situ techniques rely on components within a Pickering emulsion system, such as amphiphiles that act as hydrophobizers or ionic species that screen charges, to drive the interfacial assembly of particles. Instead of stepwise procedures to chemically tune the particle wettability, in situ methods use elements already present within the system to alter the nanoparticle interfacial behavior, often depending on Coulombic interactions to simplify operations. The surface modifications are not contingent on specific chemical reactions, which further enables a multitude of possible nanoparticles to be used within a given system. In recent studies, in situ methods have been combined with external means of shaping the interface to produce materials with high interfacial areas and complex geometries. These systems have facilely tunable properties, enabling their use in an extensive array of applications. In this feature article, in honor of the late Prof. Helmuth Möhwald, we review how in situ techniques have influenced the development of soft, advanced materials, covering the fundamental interfacial phenomena with an outlook on materials science.

Designing bijels formed by solvent transfer induced phase separation with functional nanoparticles.

Bicontinuous interfacially jammed emulsion gels (bijels) formed via solvent transfer induced phase separation (STrIPS) are new soft materials with potential applications in separations, healthcare, or catalysis. To facilitate their applications, means to fabricate STrIPS bijels with nanoparticles of various surface chemistries are needed. Here, we investigate the formation of STrIPS bijels with nanoparticles of different wettabilities, ranging from partially hydrophobic to extremely hydrophilic. To this end, the surface wettability of silica nanoparticles is tailored by functionalization with ligands bearing either hydrophobic or hydrophilic terminal groups. We show that partially hydrophobic particles with acrylate groups can impart short-term stability to STrIPS bijels on their own. However, to enable long-term stability, the use of cationic surfactants is needed. Partially hydrophobic particles require short chain surfactants for morphological stability while glycerol-functionalized hydrophilic particles require double chain cationic surfactants. Variation of the surfactant concentration results in various STrIPS bijel morphologies with controllable domain sizes. Last, we show that functional groups on the nanoparticles facilitate interfacial cross-linking for the purposes of reinforcing STrIPS bijels. Our research lays the foundation for the use of a wide variety of solid particles, irrespective of their surface wettabilities, to fabricate bijels with potential applications in Pickering interfacial catalysis and as cross-flow microreactors.

One-Step Generation of Salt-Responsive Polyelectrolyte Microcapsules via Surfactant-Organized Nanoscale Interfacial Complexation in Emulsions (SO NICE).

Polyelectrolyte microcapsules are versatile compartments for encapsulation, protection, and controlled/triggered release of active agents. Conventional methods of polyelectrolyte microcapsule preparation require multiple steps or do not allow for efficient encapsulation of active agents in the lumen of the microcapsule. In this work, we present the fabrication of hollow polyelectrolyte microcapsules with a salt-responsive property based on surfactant organized nanoscale interfacial complexation in emulsions (SO NICE). In SO NICE, polyelectrolyte microcapsules are templated by water-in-oil-in-water (W/O/W) double emulsions. One polyelectrolyte is dissolved in the inner water droplet of the W/O/W double emulsions, whereas the second polyelectrolyte is dissolved in the organic phase by hydrophobic ion paring with an oppositely charged hydrophobic surfactant. Interfacial complexation of the two polyelectrolytes generates a few hundred-nanometer thick film at the inner water-oil interface of the W/O/W double emulsions. SO NICE microcapsules can be triggered to release their cargo by increasing the ionic strength of the solution, which is a hallmark of polyelectrolyte-based microcapsules. By enabling dissolution and interfacial complexation of polyelectrolytes in organic solvents, SO NICE widens the pallet of polymers that can be used to generate functional polyelectrolyte microcapsules with high encapsulation efficiency for applications in encapsulation and controlled/triggered release.

Tailoring of high-order multiple emulsions by the liquid-liquid phase separation of ternary mixtures.

Multiple emulsions with an "onion" topology are useful vehicles for drug delivery, biochemical assays, and templating materials. They can be assembled by ternary liquid phase separation by microfluidics, but the control over their design is limited because the mechanism for their creation is unknown. Herein we show that phase separation occurs through self-similar cycles of mass transfer, spinodal decomposition or nucleation, and coalescence into multiple layers. Mapping out the phase diagram shows a linear relationship between the diameters of concentric layers, the slope of which depends on the initial ternary composition and the molecular weight of the surfactant. These general rules quantitatively predict the number of droplet layers (multiplicity), which we used to devise self-assembly routes for polymer capsules and liposomes. Moreover, we extended the technique to the assembly of lipid-stabilized droplets with ordered internal structures.

Nanostructured, Fluid-Bicontinuous Gels for Continuous-Flow Liquid-Liquid Extraction.

Fluid-bicontinuous gels are unique materials that allow two distinct fluids to interact through a percolating, rigid scaffold. Current restrictions for their use are the large fluid-channel sizes (>5 µm), limiting the fluid-fluid interaction surface-area, and the inability to flow liquids through the channels. In this work a scalable synthesis route of nanoparticle stabilized fluid-bicontinuous gels with channels sizes below 500 nm and specific surface areas of 2 m2 cm-3 is introduced. Moreover, it is demonstrated that liquids can be pumped through the fluid-bicontinuous gels via electroosmosis. The fast liquid flow in the fluid-bicontinuous gel facilitates their use for molecular separations in continuous-flow liquid-liquid extraction. Together with the high surface areas, liquid flow through fluid-bicontinuous gels enhances their potential as highly permeable porous materials with possible uses as microreaction media, fuel-cell components, and separation membranes.

Synthesis and Polyelectrolyte Functionalization of Hollow Fiber Membranes Formed by Solvent Transfer Induced Phase Separation.

Ultrafiltration membranes are important porous materials to produce freshwater in an increasingly water-scarce world. A recent approach to generate porous membranes is solvent transfer induced phase separation (STrIPS). During STrIPS, the interplay of liquid-liquid phase separation and nanoparticle self-assembly results in hollow fibers with small surface pores, ideal structures for applications as filtration membranes. However, the underlying mechanisms of the membrane formation are still poorly understood, limiting the control over structure and properties. To address this knowledge gap, we study the nonequilibrium dynamics of hollow fiber structure evolution. Confocal microscopy reveals the distribution of nanoparticles and monomers during STrIPS. Diffusion simulations are combined with measurements of the interfacial elasticity to investigate the effect of the solvent concentration on nanoparticle stabilization. Furthermore, we demonstrate the separation performance of the membrane during ultrafiltration. To this end, polyelectrolyte multilayers are deposited on the membrane, leading to tunable pores that enable the removal of dextran molecules of different molecular weights (>360 kDa, >60 kDa, >18 kDa) from a feed water stream. The resulting understanding of STrIPS and the simplicity of the synthesis process open avenues to design novel membranes for advanced separation applications.

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions.

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.

Controlling Surfactant Adsorption on Highly Charged Nanoparticles to Stabilize Bijels.

Bicontinuous particle-stabilized emulsions (bijels) are networks of interpenetrating oil/water channels with applications in catalysis, tissue engineering, and energy storage. Bijels can be generated by arresting solvent transfer induced phase separation (STrIPS) via interfacial jamming of nanoparticles. However, until now, STrIPS bijels have only been formed with silica nanoparticles of low surface charge densities, limiting their potential applications in catalysis and fluid transport. Here, we show how strongly charged silica nanoparticles can stabilize bijels. To this end, we carry out a systematic study employing dynamic light scattering, zeta potential, acid/base titrations, turbidimetry, surface tension, and confocal microscopy. We find that moderating the adsorption of oppositely charged surfactants on the particles is crucial to facilitate particle dispersibility in the bijel casting mixture and bijel stabilization. Our results potentially introduce a general understanding for bijel fabrication with different inorganic nanoparticle materials of variable charge density.

Robust Bijels for Reactive Separation via Silica-Reinforced Nanoparticle Layers.

Pickering emulsions have been successfully used as media for catalysis and separation. However, simultaneous reaction and separation cannot be performed in a continuous mode in these systems, because reagents cannot be readily loaded into or recovered from the dispersed phase. Bicontinuous interfacially jammed emulsion gels (bijels), in which the oil and water phases are continuous throughout the structure, have potential as media for simultaneous reaction and separation in a continuous mode. In this work, we take a major step toward realizing this vision by demonstrating the ability of bijels to be used in reactive separation performed in a batch fashion. To perform effectively, bijels must maintain their morphology and interfacial mass transfer properties during reaction. To strengthen the bijels, we modify the solvent transfer-induced phase separation (STRIPS) method to make bijels resistant to mechanical stresses and prevent detachment of nanoparticles from the oil/water interface due to pH changes by chemically fusing the interfacial nanoparticles. The reinforced bijel is successfully tested in base-catalyzed hydrolysis of esters and remains robust under these challenging conditions.

Bicontinuous Interfacially Jammed Emulsion Gels (bijels) as Media for Enabling Enzymatic Reactive Separation of a Highly Water Insoluble Substrate.

Although enzymes are efficient catalysts capable of converting various substrates into desired products with high specificity under mild conditions, their effectiveness as catalysts is substantially reduced when substrates are poorly water-soluble. In this study, to expedite the enzymatic conversion of a hydrophobic substrate, we use a bicontinuous interfacially jammed emulsion gel (bijel) which provides large interfacial area between two immiscible liquids: oil and water. Using lipase-catalyzed hydrolysis of tributyrin as a model reaction in a batch mode, we show that bijels can be used as media to enable enzymatic reaction. The bijel system gives a four-fold increase in the initial reaction rate in comparison to a stirred biphasic medium. Our results demonstrate that bijels are powerful biphasic reaction media to accelerate enzymatic reactions with various hydrophobic reagents. This work also demonstrates that bijels can potentially be used as reaction media to enable continuous reactive separations.

Shaping nanoparticle fingerprints at the interface of cholesteric droplets.

The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. Here, we balance the interfacial energy of nanoparticles against the elastic energy of cholesteric liquid crystals to dynamically shape nanoparticle assemblies at a fluid interface. By adjusting the concentration of surfactant that plays the dual role of tuning the degree of nanoparticle hydrophobicity and altering the molecular anchoring of liquid crystals, we pattern nanoparticles at the interface of cholesteric liquid crystal emulsions. In this system, interfacial assembly is tempered by elastic patterns that arise from the geometric frustration of confined cholesterics. Patterns are tunable by varying both surfactant and chiral dopant concentrations. Adjusting the particle hydrophobicity more finely by regulating the surfactant concentration and solution pH further modifies the rigidity of assemblies, giving rise to surprising assembly dynamics dictated by the underlying elasticity of the cholesteric. Because particle assembly occurs at the interface with the desired structures exposed to the surrounding water solution, we demonstrate that particles can be readily cross-linked and manipulated, forming structures that retain their shape under external perturbations. This study serves as a foundation for better understanding inter-nanoparticle interactions at interfaces by tempering their assembly with elasticity and for creating materials with chemical heterogeneity and linear, periodic structures, essential for optical and energy applications.

Multifunctional nanocomposite hollow fiber membranes by solvent transfer induced phase separation.

The decoration of porous membranes with a dense layer of nanoparticles imparts useful functionality and can enhance membrane separation and anti-fouling properties. However, manufacturing of nanoparticle-coated membranes requires multiple steps and tedious processing. Here, we introduce a facile single-step method in which bicontinuous interfacially jammed emulsions are used to form nanoparticle-functionalized hollow fiber membranes. The resulting nanocomposite membranes prepared via solvent transfer-induced phase separation and photopolymerization have exceptionally high nanoparticle loadings (up to 50 wt% silica nanoparticles) and feature densely packed nanoparticles uniformly distributed over the entire membrane surfaces. These structurally well-defined, asymmetric membranes facilitate control over membrane flux and selectivity, enable the formation of stimuli responsive hydrogel nanocomposite membranes, and can be easily modified to introduce antifouling features. This approach forms a foundation for the formation of advanced nanocomposite membranes comprising diverse building blocks with potential applications in water treatment, industrial separations and as catalytic membrane reactors.

In Situ Mechanical Testing of Nanostructured Bijel Fibers.

Bijels are a class of soft materials with potential for application in diverse areas including healthcare, food, energy, and reaction engineering due to their unique structural, mechanical, and transport properties. To realize their potential, means to fabricate, characterize, and manipulate bijel mechanics are needed. We recently developed a method based on solvent transfer-induced phase separation (STRIPS) that enables continuous fabrication of hierarchically structured bijel fibers from a broad array of constituent fluids and nanoparticles using a microfluidic platform. Here, we introduce an in situ technique to characterize bijel fiber mechanics at initial and final stages of the formation process within a microfluidics device. By manipulation of the hydrodynamic stresses applied to the fiber, the fiber is placed under tension until it breaks into segments. Analysis of the stress field allows fracture strength to be inferred; fracture strengths can be as high as several thousand Pa, depending on nanoparticle content. These findings broaden the potential for the use of STRIPS bijels in applications with different mechanical demands. Moreover, our in situ mechanical characterization method could potentially enable determination of properties of other soft fibrous materials made of hydrogels, capillary suspensions, colloidal gels, or high internal phase emulsions.

Continuous Fabrication of Hierarchical and Asymmetric Bijel Microparticles, Fibers, and Membranes by Solvent Transfer-Induced Phase Separation (STRIPS).

Continuous generation of hierarchical and asymmetric bijels based on solvent-transfer-induced phase separation (STRIPS) is demonstrated. In STRIPS, phase separation is induced by solvent extraction from an initially homogeneous ternary mixture, and bicontinuous morphology is stabilized by inter-facial attachment of nano-particles, which are functionalized in situ. STRIPS allows stable bijel formation from a wide variety of liquids and particles.

Development of nanoparticle stabilized polymer nanocontainers with high content of the encapsulated active agent and their application in water-borne anticorrosive coatings.

A novel method for the encapsulation of organic active agents in nanoparticle-armored polymer composite nanocontainers (analog of Pickering emulsions) is introduced. The multifunctionality of the constituents allows a fabrication path that does not require auxiliary materials. Embedding the composite nanocontainers into a water-based alkyd resin and subsequent film formation yields a homogeneous polymer film doped with highly disperse composite nanocontainers. The resistance and self-healing of such a film on aluminium is enhanced.