Tongue prosthesis after total glossectomy: a case report.

Squamous cell carcinoma (SCC) is the type of cancer that most frequently affects the oral cavity, mainly in men older than 50 years of age. Treatment for oral SCC often involves surgical excision of the affected margins, resulting in mutilation that affects the patient's quality of life. The objective of this case report is to describe the prosthetic treatment of a 56-year-old man who underwent total glossectomy, resulting in speech and swallowing difficulties. The proposed treatment was a tongue prosthesis retained by orthodontic clasps on the mandibular first molars. After maxillary and mandibular complete-arch impressions were performed and casts were prepared for prosthetic planning, an acrylic resin plate and 3 tongue prototypes were fabricated. Esthetic and functional tests were carried out, and 2 tongue models (1 for speech and 1 for eating) were selected for acrylization, finishing, and polishing. After placement of the prostheses, the patient was referred for follow-up with a speech therapist to improve his adaptation with the prostheses. The patient was satisfied with the prostheses and able to perform the functions of chewing, swallowing, and speech production, which helped in his social reintegration and improved his quality of life.

Biocompatibility of primers and an adhesive used for implant-retained maxillofacial prostheses: An in vitro analysis.

STATEMENT OF PROBLEM: Implant-retained maxillofacial prostheses should be biocompatible, regardless of the primers and adhesives used to bond the acrylic resin and facial silicone. The authors are unaware of any study evaluating the influence of these primers and adhesives on the biocompatibility of maxillofacial prostheses. PURPOSE: The purpose of this in vitro study was to evaluate the cytotoxic effect of primers and an adhesive used to bond acrylic resin and facial silicone during the fabrication of implant-retained maxillofacial prostheses. MATERIAL AND METHODS: Twenty-eight circular specimens made of resin and silicone were fabricated, either bonded or nonbonded with primer and adhesive. The specimens were divided into 7 groups: resin; silicone; resin+silastic medical adhesive type A+silicone; resin+DC 1205 primer silicone; resin+Sofreliner primer+silicone; resin+DC 1205 primer+silastic medical adhesive type A+silicone; and resin+Sofreliner primer+silastic medical adhesive type A+silicone. Eluates of the materials tested were prepared by setting 4 specimens of each experimental group in Falcon tubes with medium and incubating at 37°C for 24 hours. The eluate cytotoxicity was evaluated by an assay of survival/proliferation ((3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide [MTT] test) in cultures of human keratinocytes. The levels of IL1, IL6, TNFα, and the chemokine MIP-1α were evaluated by enzyme-linked immunosorbent assay. The mRNA expressions for MMP-9, TGF-ß, and collagen type IV were analyzed by the real time polymerase chain reaction. Data were submitted to analysis of variance with Bonferroni post hoc tests (α=.05). RESULTS: An increased cell proliferation was observed for the RAS group, with statistically significant differences (P<.001) compared with the unstimulated group. The RDCpS group showed the highest IL6 concentration values (P<.001). No significant statistical difference was found in the relative quantification of mRNA for collagen type IV, MMP9, or TGFß between the groups (P>.05). CONCLUSIONS: The RAS group showed the highest cell proliferation percentage, while the RDCpS group exhibited the highest IL6 concentration values. No detectable levels of IL1ß, TNF α, or CCL3/MIP1α were observed. The tested materials showed no toxic effects on the HaCaT cell line.

The Effect of Disinfection Techniques on the Flexural Strength of Thermopolymerisable Acrylic Resins With or Without Pigment Addition.

OBJECTIVES: The aim of this study was to assess the flexural strength of two brands of thermopolymerisable acrylic resins (Onda Cryl, Artigos Odontológicos Clássico Ltda, São Paulo, SP, Brazil; and Lucitone 550, Dentsply, York, PA, USA) with varying concentrations of pigment (Poli-Côr, Artigos Odontológicos Clássico Ltda, São Paulo, SP, Brazil) under the influence of thermocycling, storage and disinfection. MATERIAL AND METHODS: A total of 210 samples were manufactured (105 for each acrylic resin brand), with dimensions of 64 x 10 x 3.3 mm. The samples were divided into 30 subgroups (n = 7) according to the proportion of pigment used (without pigment, 3% and 7%), the assessment period (initial or thermocycling for 2000 cycles) and disinfection method (immersion in 1% sodium hypochlorite, (Apothicário, Araçatuba, SP, Brazil), microwave energy or immersion in alkaline peroxide (Efferdent, Pfizer, Morris Plains, NJ, USA). The samples were submitted to the flexural strength test before and after thermocycling, and after storage with disinfection. The disinfection process was performed every 3 days, for 60 days. Data were submitted to analysis of variance (ANOVA) and Tukey test (p < 0.05). RESULTS: The factors that provided statistical alteration in flexural strength values were resin type and assessment period. The Onda Cryl resin and the period after disinfection (126 ± 25 MPa) exhibited the higher values of flexural strength. CONCLUSION: Following disinfection, Onda-Cryl resin exhibited the highest values of flexural strength. All the samples obtained are considered clinically acceptable.

Use of stress analysis methods to evaluate the biomechanics of oral rehabilitation with implants.

Because the biomechanical behavior of dental implants is different from that of natural tooth, clinical problems may occur. The mechanism of stress distribution and load transfer to the implant/bone interface is a critical issue affecting the success rate of implants. Therefore, the aim of this study was to conduct a brief literature review of the available stress analysis methods to study implant-supported prosthesis loading and to discuss their contributions in the biomechanical evaluation of oral rehabilitation with implants. Several studies have used experimental, analytical, and computational models by means of finite element models (FEM), photoelasticity, strain gauges and associations of these methods to evaluate the biomechanical behavior of dental implants. The FEM has been used to evaluate new components, configurations, materials, and shapes of implants. The greatest advantage of the photoelastic method is the ability to visualize the stresses in complex structures, such as oral structures, and to observe the stress patterns in the whole model, allowing the researcher to localize and quantify the stress magnitude. Strain gauges can be used to assess in vivo and in vitro stress in prostheses, implants, and teeth. Some authors use the strain gauge technique with photoelasticity or FEM techniques. These methodologies can be widely applied in dentistry, mainly in the research field. Therefore, they can guide further research and clinical studies by predicting some disadvantages and streamlining clinical time.

Fabrication techniques for ocular prostheses--an overview.

The goals of treatment with ocular prostheses are to restore facial aesthetics and self-esteem to anophthalmic patients. Fabricated in acrylic resin, artificial eyes should be aesthetically pleasing, scratch-resistant, and adequately polished. Use of a prosthesis without such characteristics can lead to psychological damage, as well as infection and inflammation due to the accumulation of microorganisms and other substances on an irregularly shaped prosthesis. The present literature review describes the different techniques for fabricating ocular prostheses. Reproduction of the iris color and color stability are important factors that promote adequate aesthetics. The fabrication of an individual ocular prosthesis in acrylic resin provides satisfactory aesthetic results because the impression process establishes the defect contour. Additionally, the iris and sclera can be individually characterized. As the techniques, materials, and manufacturing methods for ocular prostheses continue to evolve, the aesthetics and functionality of prostheses will also improve.

Effect of beverages and mouthwashes on the hardness of polymers used in intraoral prostheses.

PURPOSE: The mechanical properties of acrylic resins used in intraoral prostheses may be altered by frequent exposure to liquids such as beverages and mouthwashes. This study aimed to evaluate the effect of thermocycling and liquid immersion on the hardness of four brands of acrylic resins commonly used in removable prostheses (Onda Cryl, QC-20, Clássico, Lucitone). MATERIALS AND METHODS: For each brand of resin, seven specimens were immersed in each of six solutions (coffee, cola, red wine, Plax-Colgate, Listerine [LI], Oral B), and seven more were placed in artificial saliva (control). The hardness was tested using a microhardness tester before and after 5000 thermocycles and after 1, 3, 24, 48, and 96 hours of immersion. The results were analyzed using three-way repeated-measures ANOVA and Tukey's test (p < 0.05). RESULTS: The hardness of the resins decreased following thermocycling and immersion in the solutions. Specimens immersed in cola and wine exhibited significant decreases in hardness after immersion for 96 hours, although the greatest significant decrease in hardness occurred in specimens immersed in LI. However, according to American Dental Association specification 12, the Knoop hardness of acrylic resins for intraoral prostheses should not be below 15. Thus, the median values of superficial hardness observed in most of the acrylic resins in this study are considered clinically acceptable. CONCLUSIONS: The microhardness of polymers used for intraoral prostheses decreases following thermocycling. Among specimens immersed in beverages, those immersed in cola or wine experienced the greatest decrease in microhardness. Immersion of acrylic resins in LI significantly decreased the microhardness in relation to the initial value. Among the resins assessed, QC-20 exhibited the lowest initial hardness.

Stress distribution in implant-supported prosthesis with external and internal implant-abutment connections.

OBJECTIVE: This study aimed to investigate the stress distribution in screwed implant-supported prostheses with different implant-abutment connections by using a photoelastic analysis. MATERIALS AND METHODS: Four photoelastic models were fabricated in PL-2 resin and divided according to the implant-abutment connection (external hexagon (EH) and Morse taper (MT) implants (3.75 × 11.5 mm)) and the number crowns (single and 3-unit piece). Models were positioned in a circular polariscope and 100-N axial and oblique (45) loading were applied in the occlusal surface of the crowns by using a universal testing machine. The stresses were photographically recorded and qualitatively analyzed using software (Adobe Photoshop). RESULTS: Under axial loading, the MT implants exhibited a lower number of fringes for single-unit crowns than EH implants, whereas for a 3-unit piece the MT implants showed a higher number of fringes vs EH implants. The oblique loading increased the number of fringes for all groups. CONCLUSION: In conclusion, the MT implant-abutment connection reduced the amount of stress in single-unit crowns, for 3-unit piece crowns the amount of stress was lower using an external hexagon connection. The stress pattern was similar for all groups. Oblique loading promoted a higher stress concentration than axial loading.

Use of facial protection to prevent reinjury during sports practice.

The objective of the study was to report the prevention of facial reinjury of a volleyball player using a custom-made protective facial shield. A custom-made protective partial facial shield was fabricated using polymethylmethacrylate and was fitted with a soft lining material to provide additional comfort and protection to the injured area. Facial protection provides greater security against possible facial injuries and allows injured areas to recover during sports practice.

Cementation of prosthetic restorations: from conventional cementation to dental bonding concept.

The cementation procedure of metal-free fixed partial dentures exhibits special characteristics about the porcelains and cementation agents, which turns the correct association between these materials necessary. Our purpose in this literature review was to point the main groups of cements associated to metal-free restoration and discuss about the advantages, disadvantages, and recommendations of each one. Our search was confined to the electronic databases PubMed and SciELO and to books about this matter. There are essentially 3 types of hard cement: conventional, resin, or a hybrid of the two. The metal-free restorations can be fixed with conventional or resin cements. The right choice of luting material is of vital importance to the longevity of dental restorative materials. Conventional cements are advantageous when good compressive straight, good film thickness, and water dissolution resistance are necessary. However, they need an ideal preparation, and they are not acid dissolution resistant. Conventional cements are indicated to porcelains that cannot be acid etched. Resin cements represent the choice to metal-free restoration cementation because they present better physical properties and aesthetic than conventional agents.

Oral rehabilitation with implantations: association of fixed partial prosthesis, UCLA system, and EsthetiCone.

The objective of modern odontology is to reconstitute to the patient the comfort, the function, the aesthetic form, the phonetic capability, and normal health. However, the more the patient is toothless, the more this objective becomes difficult inside traditional dentistry. As a result of continuous research of materials and techniques, permissible success is now a reality, whitewashing many challenging clinical situations. Thus, the objective of the article was to present a clinical case where association of the universal cast to long abutment pillars and EsthetiCone were used for aesthetic whitewashing. A man presented to the clinic of the Faculty of Dentistry, Universidade Estadual Paulista. After clinical examination and radiographic evaluation evidenced the necessity of substitution of fixed prostheses (15-25), he was presented with disadaptation and a favorable aesthetic solution. Ahead of the evaluated picture and considering the extension of the toothless space made, it was opted more, to the accomplishment of surgery, the setting of 2 implantations in the region and 2 in each edentate side of the posterior portion of the jaw. On 6 implants and 2 teeth, 10 metal ceramic crowns had been confectioned: 4 of them being joined in the region of the 12 to the 22 and the other 6 as unit crowns in the region of the 13, the 14, the 15, the 23, the 24, and the 25. The carried-through treatment was capable to return the aesthetic form, the function, the phonetic capability, the comfort, and the health of the verbal socket.

Influence of pigment and opacifier on dimensional stability and detail reproduction of maxillofacial silicone elastomer.

We evaluated the influence of chemical disinfection and accelerated aging on the dimensional stability and detail reproduction of a silicone elastomer containing an opacifier and/or a pigment. A total of 120 samples were fabricated from Silastic MDX 4-4210 silicone and divided into groups (n = 10) according to pigment and/or opacifier (ceramic powder and/or barium sulfate) and disinfectant solution (neutral soap, Efferdent, or 4% chlorhexidine). The specimens were disinfected 3 times per week during 60 days and then subjected to accelerated aging for 1008 hours. Dimensional stability and detail reproduction tests were performed after specimens' fabrication (baseline) and chemical disinfection and periodically during accelerated aging (252, 504, and 1008 hours). The results were analyzed using 3-way repeated-measures analysis of variance and the Tukey Honestly Significant Difference test (a = 0.05). All groups exhibited dimensional changes over time. The disinfectant, pigment, and time (P < 0.0001) affected the dimensional stability of silicone. Statistically significant dimensional differences were not observed between the tested groups. Accelerated aging influenced the dimensional stability of the samples. All groups scored 2 in the detail reproduction tests, which represents the full reproduction of 3 test grooves with accurate angles. Incorporation of opacifier and/or pigment alters the dimensional stability of silicones used in facial prosthetics but seems to have no influence on detail reproduction. Accelerated aging is responsible for most of the dimensional changes in Silastic MDX4 4210, but all dimensional changes measured in this study remained within the limits of stability necessary for this application.

Prosthetic treatments for patients with oronasal communication.

The prosthetic treatments play a role in the rehabilitation of patients with congenital and acquired cleft palate. To prepare the surgical field and/or correct inevitable sequelae of the surgery, the rehabilitation with obturator prosthesis is an auxiliary or complementary treatment to surgical treatments. In cases where the surgical treatment is contraindicated, the prosthetic rehabilitation becomes a definitive treatment. The denture is planned and fabricated according to each patient. Therefore, the aim of this study was to discuss the prosthetic rehabilitation performed in patients with oronasal communication.

Prototyping for surgical and prosthetic treatment.

Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE (PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

Photoelastic stress analysis of different attachment systems on implant-retained and conventional palatal obturator prostheses.

BACKGROUND: Considering that an increasing number of patients are victims of mutilator surgical resections, these studies are important for treatment success of rehabilitation of patients presenting oronasal communication. PURPOSE: The aim of this study was to assess the stress distribution through photoelasticity in palatal obturator prostheses with different attachment systems for implants. METHODS: Two photoelastic models were obtained from an experimental maxillary model presenting an oronasal communication. One model was fabricated without implant, and the other with 2 implants 10 mm in length inserted in the left crest. Four colorless palatal obturator prostheses were fabricated. One prosthesis presented no attachment system, whereas the remaining prostheses were adapted to 3 attachment systems. The assembly was positioned in a circular polariscope for application of axial load. RESULTS: The results were based on photographic records of stress in the photoelastic model submitted to loading. The records revealed higher stress concentration on the bar-clip system followed by the O'ring/bar-clip and O'ring systems, respectively. A homogeneous stress distribution was observed on the photoelastic model with the mucous-supported prosthesis. CONCLUSIONS: The attachment systems generated different characteristics of stress distribution that was concentrated surrounding the implants. The bar-clip system exhibited the highest stress concentration on the alveolar crest.

Photoelastic analysis of implant-retained and conventional obturator prostheses with different attachment systems and soft relining.

Complete and partial loss of maxillary bone may jeopardize oral physiology and generate complications as oral-sinus-nasal communication. Palatal obturator prostheses are a treatment alternative for rehabilitation of these patients. The aim of this study was to assess stress distribution, through photoelasticity, on palatal obturator prostheses associated with different attachment systems (o'ring, bar clip, and o'ring/bar clip) of implants and submitted to relining. Two photoelastic models were fabricated according to an experimental maxillary model with oral-sinus-nasal communication. One model did not present implants, whereas the other included 2 implants with 13.0 mm in length in the left ridge. Four colorless maxillary obturator prostheses were fabricated and relined with soft silicone. One of these prostheses presented no attachment system, whereas the remaining prostheses included attachment systems adapted to the implants. The assembly (model/attachment system/prosthesis) was positioned in a circular polariscope during loading with 100 N at 10 mm/s. The results were based on observation during the experiment and photographic records of stress on the photoelastic model. The bar clip system exhibited the highest stress concentration followed by o'ring/bar clip and o'ring systems. The attachment systems presented different stress distribution with greater concentration surrounding the implants and homogenous stress distribution on the photoelastic model without implants. The highest concentration of fringes occurred, in ascending order, with o'ring, o'ring/bar clip, and bar clip systems.

Influence of pigments and opacifiers on color stability of an artificially aged facial silicone.

PURPOSE: The aim of this study was to evaluate the influence of two pigments (ceramic powder and oil paint) and one opacifier (barium sulfate) on the color stability of MDX4-4210 facial silicone submitted to accelerated aging. MATERIALS AND METHODS: Sixty specimens of silicone were fabricated and divided into six groups--colorless (G1), colorless with opacifier (G2), ceramic (G3), ceramic with opacifier (G4), oil (G5), oil with opacifier (G6). All replicas were submitted to accelerated aging for 1008 hours. The evaluations of chromatic alteration through visual analysis and reflection spectrophotometry were carried out initially and after 252, 504, and 1008 hours of aging. The results were submitted to ANOVA and Tukey's test at 5% level of significance. RESULTS: All groups exhibited chromatic alteration (ΔE > 0); however, this color alteration was not perceptible through visual analysis of the color. The pigmented groups with opacifier presented the lowest ΔE values, with a statistical difference from the other groups. For the groups without opacifier, the group pigmented with oil paint exhibited the lowest ΔE values in the different aging periods, with a statistical difference. Accelerated aging generated significant chromatic alterations in all groups after 252 hours, except for the colorless and oil groups, both with opacifier (G2 and G6). CONCLUSIONS: The opacifier protects facial silicones against color degradation, and oil paint is a stable pigment even without addition of opacifier.

Effect of chemical disinfection and accelerated aging on color stability of maxillofacial silicone with opacifiers.

PURPOSE: The purpose of this study was to evaluate the color stability of MDX4-4210 maxillofacial elastomer with opacifier addition submitted to chemical disinfection and accelerated aging. MATERIALS AND METHODS: Ninety specimens were obtained from Silastic MDX4-4210 silicone. The specimens were divided into three groups (n = 30): Group I: colorless, Group II: barium sulfate opacifier, Group III: titanium dioxide opacifier. Specimens of each group (n = 10) were disinfected with effervescent tablets, neutral soap, or 4% chlorhexidine gluconate. Disinfection was conducted three times a week for 2 months. Afterward, the specimens were submitted to different periods of accelerated aging. Color evaluation was carried out after 60 days (disinfection period) and after 252, 504, and 1008 hours of accelerated aging, using a reflection spectrophotometer. Color alterations were calculated by the CIE L*a*b* system. Data were analyzed by three-way ANOVA and Tukey test (α= 0.05). RESULTS: Group II exhibited the lowest color change, whereas Group III the highest (p < 0.05), regardless of the chemical disinfection and accelerated aging periods. CONCLUSION: Opacifier addition, chemical disinfection, and accelerated aging procedures affected the color stability of the maxillofacial silicone.

Effect of disinfection and accelerated aging on color stability of colorless and pigmented facial silicone.

PURPOSE: The aim of this study was to evaluate the color stability of a facial silicone with different pigmentations submitted to disinfection and accelerated aging. MATERIALS AND METHODS: Sixty replicas were fabricated with the silicone Silastic MDX 4-4210 and divided into three groups: no pigmentation, pigmentation with makeup powder, and pigmentation with ceramic powder. Half the replicas of each group were submitted to disinfection with Efferdent and the other with neutral soap for 60 days (n = 10). After this period, all replicas were inserted in a chamber for accelerated aging of nonmetallic specimens. The color measurements were carried out initially, after disinfection, and after accelerated aging (252, 504, 1008 hours). Color stability was evaluated through spectrophotometry. The values were submitted to ANOVA and the means to Tukey's test (p < 0.01). RESULTS: The specimens disinfected with neutral soap exhibited higher ΔE values regardless of the type of pigmentation. The colorless replicas and the specimens pigmented with ceramic exhibited a statistically significant difference between the methods of disinfection in all periods. The specimens pigmented with makeup powder did not demonstrate a statistically significant difference. CONCLUSIONS: The ceramic pigment presented greater color stability regardless of disinfection and period. On the other hand, the makeup pigment exhibited the highest values of chromatic alteration.

Use of silicone finger prostheses in amputee patients: An integrative review.

This study aimed to perform an integrative review of the literature on the use of silicone finger prostheses in amputee patients. Searches were performed in the PubMed, EMBASE, Web of Science, Scielo, and Cochrane Library databases until July 2021. Descriptors used in this article were: Silicone, finger, rehabilitation, and prosthesis. Clinical research and clinical reports on silicone finger prostheses, available in full and in English were included. Initially, 152 articles were identified. After establishing the inclusion/exclusion criteria, 23 studies were identified and constituted the final sample. Regarding the publication date of the included studies, 17.2% of them were published between 2012 and 2016. Most of the rehabilitations occurred in India (69.9%; n = 16), and the mean age of patients who used prostheses was 38.1 years. The level of scientific evidence of the included studies was IV and VI. Therefore, patients rehabilitated with silicone finger prostheses highlighted significant improvements in functional range of motion, restoration of self-esteem, advantages in psychological therapy, more pleasant social interaction, and changes in their quality of life.

Most frequent tumors in maxillofacial area rehabilitated through surgical reconstruction and prostheses.

Cancer is regarded as the abnormal cellular multiplication; it is not controlled by the organism; and its cells present a differentiated DNA. Initially, the disease does not show clinical signs, but it can be diagnosed by laboratorial examinations. When tumors are present in the maxillofacial area, they can entail the loss of these area organs, which become responsible for the carrier's social environment exclusion. This paper aimed at showing, through a literature review, the cancers that more commonly happen in the face and the possibilities of regenerating in the patient mutilated through surgical reconstruction and prostheses.