Identification of natural metabolites in mixture: a pattern recognition strategy based on (13)C NMR.

Because of their highly complex metabolite profile, the chemical characterization of bioactive natural extracts usually requires time-consuming multistep purification procedures to achieve the structural elucidation of pure individual metabolites. The aim of the present work was to develop a dereplication strategy for the identification of natural metabolites directly within mixtures. Exploiting the polarity range of metabolites, the principle was to rapidly fractionate a multigram quantity of a crude extract by centrifugal partition extraction (CPE). The obtained fractions of simplified chemical composition were subsequently analyzed by (13)C NMR. After automatic collection and alignment of (13)C signals across spectra, hierarchical clustering analysis (HCA) was performed for pattern recognition. As a result, strong correlations between (13)C signals of a single structure within the mixtures of the fraction series were visualized as chemical shift clusters. Each cluster was finally assigned to a molecular structure with the help of a locally built (13)C NMR chemical shift database. The proof of principle of this strategy was achieved on a simple model mixture of commercially available plant secondary metabolites and then applied to a bark extract of the African tree Anogeissus leiocarpus Guill. & Perr. (Combretaceae). Starting from 5 g of this genuine extract, the fraction series was generated by CPE in only 95 min. (13)C NMR analyses of all fractions followed by pattern recognition of (13)C chemical shifts resulted in the unambiguous identification of seven major compounds, namely, sericoside, trachelosperogenin E, ellagic acid, an epimer mixture of (+)-gallocatechin and (-)-epigallocatechin, 3,3'-di-O-methylellagic acid 4'-O-xylopyranoside, and 3,4,3'-tri-O-methylflavellagic acid 4'-O-glucopyranoside.

Gradient elution method in centrifugal partition chromatography for the separation of a complex sophorolipid mixture obtained from Candida bombicola yeasts.

Sophorolipids represent an important class of natural surfactants with a variety of environmental, cosmetic, and pharmaceutical applications. Despite their promising physicochemical and biological properties, the use of sophorolipids is hampered by the lack of information regarding their individual structure-activity relationships. The major difficulty in isolating pure sophorolipids arises from the high complexity of crude fermentation media composition and from their strong structural similarities. In this work, a centrifugal partition chromatography method was developed in an original gradient elution mode for the separation of sophorolipids produced by the yeast Candida bombicola. Experiments were realized by using three sets of solvent systems composed of n-heptane, ethyl acetate, n-butanol, methanol, and water in different proportions. The separation was performed at 5 mL/min in the ascending mode by increasing progressively the polarity of the organic mobile phase. In these conditions, more than 80% of the sophorolipids present in the initial crude fermentation extract were eluted successively from the most hydrophobic lactone forms to the most hydrophilic acid forms. The structures of the isolated sophorolipids were further elucidated by HPLC and NMR analyses.

Stepwise elution of a three-phase solvent system in centrifugal partition extraction: a new strategy for the fractionation and phytochemical screening of a crude bark extract.

INTRODUCTION: Tree bark represents an interesting source of bioactive molecules for the discovery of new pharmaceutical agents. However, the detailed screening of secondary metabolites in crude bark extracts is often hampered by the presence of tannins, which are difficult to separate from other plant constituents. OBJECTIVE: In the present study, a new centrifugal partition extraction (CPE) method was developed in order to fractionate a crude bark extract of Anogeissus leiocarpus Guill. & Perr. (Combretaceae). METHODS: A three-phase solvent system composed of n-heptane, methyl tert-butyl ether, acetonitrile and water was optimised for the stepwise elution at 20 mL/min of different phytochemical classes according to their hydrophobicity. Onedimensional and two-dimensional NMR analyses of the simplified fractions were then performed in order to characterise potentially interesting metabolites. RESULTS: In one step, 5 g of the initial crude extract were efficiently fractionated to yield highly simplified fractions that contained triterpenes, ellagic acid derivatives, flavonoids and phenolic compounds. All undesired compounds, that is, the highly abundant water-soluble tannins (78.8%), were totally removed and each run was rapidly achieved in 90 min on a the multi-gram scale and with low solvent volumes. CONCLUSION: Centrifugal partition extraction in the elution mode using a three-phase solvent system can thus be proposed as an efficient and cost-effective alternative for a rapid fractionation of crude bark extracts and for an effective screening of potentially active secondary metabolites.

Application of Rapeseed Meal Protein Isolate as a Supplement to Texture-Modified Food for the Elderly.

Rapeseed meal (RSM), a by-product of rapeseed oil extraction, is currently used for low-value purposes. With a biorefinery approach, rapeseed proteins may be extracted and recovered for high-end uses to fully exploit their nutritional and functional properties. This study reports the application of RSM protein isolate, the main output of a biorefining process aimed at recovering high-value molecules from rapeseed meal, as a supplement to texture-modified (TM) food designed for elderly people with mastication and dysphagia problems. The compositional (macronutrients by Official Methods of Analyses, and mineral and trace element profiles using Inductively Coupled Plasma Optical Emission Spectrometry ICP-OES), nutritional and sensory evaluations of TM chicken breast, carrots and bread formulated without and with RSM protein supplementation (5% w/w) are hereby reported. The results show that the texture modification of food combined with rapeseed protein isolate supplementation has a positive impact on the nutritional and sensory profile of food, meeting the special requirements of seniors. TM chicken breast and bread supplemented with RSM protein isolate showed unaltered or even improved sensory properties and a higher nutrient density, with particular regard to proteins (+20-40%) and minerals (+10-16%). Supplemented TM carrots, in spite of the high nutrient density, showed a limited acceptability, due to poor sensory properties that could be overcome with an adjustment to the formulation. This study highlights the potentialities of RSM as a sustainable novel protein source in the food sector. The application of RSM protein proposed here is in line with the major current challenges of food systems such as the responsible management of natural resources, the valorization of agri-food by-products, and healthy nutrition with focus on elderly people.

Valorization of Tomato Seed By-Products as a Source of Fatty Acids and Bioactive Compounds by Using Advanced Extraction Techniques.

In this work, lipids and bioactive compounds from tomato seed by-products were extracted and compared by using advanced extraction techniques, such as microwave-assisted extraction (MAE) and supercritical fluid extraction (SFE). The influence of different extraction parameters, including extraction temperature (T), time (t) and solvent volume (V) for MAE as well as extraction temperature (T), pressure (P) and flow rate (F) for SFE-CO2, was evaluated on tomato seed oil (TSO) yield and fatty acids composition using response surface methodology (RSM). Optimum extraction conditions for MAE were 56.2 °C, 29.0 min, and 67.6 mL, whereas conditions of 60.2 °C, 400.0 bar, and 64.6 g min-1 were found for SFE-CO2. Under these conditions, higher TSO extraction yields were obtained by MAE compared to SFE-CO2 (25.3 wt% and 16.9 wt%, respectively), while similar fatty acids profiles were found by GC in terms of FAMEs composition: methyl palmitate, methyl stearate, methyl oleate, and methyl linoleate, accounting for around 80 wt% of unsaturated fatty acids. TSO MAE extracts showed high DPPH• radical scavenging activity which was related to the presence of tocopherols; in particular γ-tocopherol, which was found as the dominant homologue (260.3 ± 0.6 mg kgTS-1) followed by a lower amount of α-tocopherol (6.53 ± 0.12 mg kgTS-1) by HPLC-DAD. The obtained results suggested that tomato seeds are an interesting source of bioactive compounds with potential use in a wide range of nutritional and food applications, increasing the added value of this by-product, which is currently underexploited.

Anthocyanin Hybrid Nanopigments from Pomegranate Waste: Colour, Thermomechanical Stability and Environmental Impact of Polyester-Based Bionanocomposites.

In the present work, anthocyanin (ACN) hybrid nanopigments were synthetized by using a natural pomegranate dye (PD) and calcined hydrotalcite (HT) and montmorillonite (MMT) nanoclays. A wide colour gamut was obtained with MMT-based nanopigments ranging from reddish to bluish hues caused by structural transformations of ACNs at different pH values. However, a buffer effect was observed with HT obtaining samples a similar final colour regardless of the synthesis conditions. Nanopigments added with a biomordant extracted from pomegranate peels showed a different colour compared to the incorporation of a commercial mordant due to the intrinsic colouring properties of the pomegranate bioadditive. The developed nanopigments were incorporated at 7 wt% loading to produce novel polyester-based bionanocomposites which were characterized in terms of thermal, mechanical and colour properties. The encapsulation of PD into the nanoclays improved its thermal stability, in particular for MMT-based nanopigments. The pH changes observed during the nanofillers synthesis affected the final colour of the MMT-based nanocomposites, inducing a general increase in ∆E* and a decrease in gloss values. Slight improvements were obtained in terms of elastic modulus for MMT-based polymer samples confirming the applicability of the developed bionanocomposites as colouring and reinforcement materials. A very similar environmental profile was obtained for MMT and HT-based nanofillers showing MMT-based nanopigments a slightly better general behaviour. The results of the LCA study evidenced the suitability of the processes used in this work to the circular bioeconomy approach through sustainable food waste management and the production of bioplastics using waste substrates.

Optimisation of Sequential Microwave-Assisted Extraction of Essential Oil and Pigment from Lemon Peels Waste.

In this work, a cascade approach to obtain different valuable fractions from lemon peels waste was optimised using microwave-assisted processes. Microwave-assisted hydrodistillation (MAHD) with a Clevenger apparatus was firstly used to obtain the lemon essential oil (LEO). The remaining residue was then submitted to microwave-assisted extraction (MAE) to extract the lemon pigment (LP). A Box-Behnken design was used to evaluate the influence of ethanol concentration, temperature and time in LP extraction in terms of extraction yield and colour intensity. Optimal extraction conditions for LP were 80% (v/v) ethanol, 80 °C and 50 min, with a liquid-to-solid ratio of 1:10. The obtained yields for LEO and LP were around 2 wt.% and 6 wt.%, respectively. The composition of LEO was analysed by gas chromatography with flame ionisation detection (GC-FID), and limonene (65.082 wt.%), ß-pinene (14.517 wt.%) and γ-terpinene (9.743 wt.%) were mainly identified. LP was purified by using different Amberlite adsorption resins (XAD4, XAD7HP and XAD16N), showing XAD16N the best adsorption capacity. Enrichment factors of 4.3, 4.5 and 5.0 were found for eriocitrin, diosmin and hesperidin, respectively, which were detected as the main components in LP by ultra-high-performance liquid chromatography-diode array detector-tandem mass spectrometry (UPLC-DAD-MS) analysis, with final concentrations of 4.728 wt.%, 7.368 wt.% and 2.658 wt.%, respectively. Successful antimicrobial capacity against Escherichia coli and Staphylococcus aureus was obtained for LEO. The results from this work showed the potential of applying a cascading approach based on microwave-assisted processes to valorise lemon wastes, obtaining natural pigments and antimicrobials to be applied in food, cosmetic and polymer industries.

An integrated process for the recovery of high added-value compounds from olive oil using solid support free liquid-liquid extraction and chromatography techniques.

An integrated extraction and purification process for the direct recovery of high added value compounds from extra virgin olive oil (EVOO) is proposed by using solid support free liquid-liquid extraction and chromatography techniques. Two different extraction methods were developed on a laboratory-scale Centrifugal Partition Extractor (CPE): a sequential strategy consisting of several "extraction-recovery" cycles and a continuous strategy based on stationary phase co-current elution. In both cases, EVOO was used as mobile phase diluted in food grade n-hexane (feed mobile phase) and the required biphasic system was obtained by adding ethanol and water as polar solvents. For the sequential process, 17.5L of feed EVOO containing organic phase (i.e. 7L of EVOO treated) were extracted yielding 9.5g of total phenolic fraction corresponding to a productivity of 5.8g/h/L of CPE column. Regarding the second approach, the co-current process, 2L of the feed oil phase (containing to 0.8L of EVOO) were treated at 100mL/min yielding 1.03g of total phenolic fraction corresponding to a productivity of 8.9g/h/L of CPE column. The total phenolic fraction was then fractionated by using stepwise gradient elution Centrifugal Partition Chromatography (CPC). The biphasic solvent systems were composed of n-hexane, ethyl acetate, ethanol and water in different proportions (X/Y/2/3, v/v). In a single run of 4h on a column with a capacity of 1L, 910mg of oleocanthal, 882mg of oleacein, 104mg of hydroxytyrosol were successfully recovered from 5g of phenolic extract with purities of 85%, 92% and 90%, respectively. CPC fractions were then submitted to orthogonal chromatographic steps (adsorption on silica gel or size exclusion chromatography) leading to the isolation of additional eleven compounds belonging to triterpens, phenolic compounds and secoiridoids. Among them, elenolic acid ethylester was found to be new compound. Thin Layer Chromatography (TLC), Nuclear magnetic Resonance (NMR) and High Performance Liquid Chromatography - Diode Array Detector (HPLC-DAD) were used for monitoring and evaluation purposes throughout the entire procedure.

Centrifugal partition extraction in the pH-zone-refining displacement mode: an efficient strategy for the screening and isolation of biologically active phenolic compounds.

Centrifugal partition extraction (CPE) was developed for the first time in the pH-zone-refining mode to fractionate a crude bark extract of the African tree Anogeissus leiocarpus Guill. & Perr. (Combretaceae). The fractionation process was performed at a flow rate of 20mL/min using a biphasic solvent system composed of methyl tert-butyl ether/acetonitrile/water (4:1:5, v/v/v) in the ascending mode. Sodium hydroxide (40mM) and trifluoroacetic acid (30mM) were used as retainer and displacer agents, respectively. In a single run of 67min, 3g of the initial crude extract were successfully separated into fractions selectively enriched in ionizable triterpenes, ellagic acid derivatives and flavonoids. The antioxidant potential of the initial crude extract, isolated compounds and fraction pools was also evaluated by using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) stable free radical scavenging assay, providing an interesting view about the effect of the degree of substitution of ellagic acid derivatives on their radical scavenging activity. This study will demonstrate that centrifugal partition extraction used in the pH-zone-refining mode can be proposed as an efficient strategy for the rapid screening of natural phenolic compounds.

Strong ion exchange in centrifugal partition extraction (SIX-CPE): effect of partition cell design and dimensions on purification process efficiency.

The aim of this article was to evaluate the influence of the column design of a hydrostatic support-free liquid-liquid chromatography device on the process efficiency when the strong ion-exchange (SIX) development mode is used. The purification of p-hydroxybenzylglucosinolate (sinalbin) from a crude aqueous extract of white mustard seeds (Sinapis alba L.) was achieved on two types of devices: a centrifugal partition chromatograph (CPC) and a centrifugal partition extractor (CPE). They differ in the number, volume and geometry of their partition cells. The SIX-CPE process was evaluated in terms of productivity and sinalbin purification capability as compared to previously optimized SIX-CPC protocols that were carried out on columns of 200 mL and 5700 mL inner volume, respectively. The objective was to determine whether the decrease in partition cell number, the increase in their volume and the use of a "twin cell" design would induce a significant increase in productivity by applying higher mobile phase flow rate while maintaining a constant separation quality. 4.6g of sinalbin (92% recovery) were isolated from 25 g of a crude white mustard seed extract, in only 32 min and with a purity of 94.7%, thus corresponding to a productivity of 28 g per hour and per liter of column volume (g/h/LV(c)). Therefore, the SIX-CPE process demonstrates promising industrial technology transfer perspectives for the large-scale isolation of ionized natural products.

Intensified extraction of ionized natural products by ion pair centrifugal partition extraction.

The potential of centrifugal partition extraction (CPE) combined with the ion-pair (IP) extraction mode to simultaneously extract and purify natural ionized saponins from licorice is presented in this work. The design of the instrument, a new laboratory-scale Fast Centrifugal Partition Extractor (FCPE300(®)), has evolved from centrifugal partition chromatography (CPC) columns, but with less cells of larger volume. Some hydrodynamic characteristics of the FCPE300(®) were highlighted by investigating the retention of the stationary phase under different flow rate conditions and for different biphasic solvent systems. A method based on the ion-pair extraction mode was developed to extract glycyrrhizin (GL), a biologically active ionic saponin naturally present in licorice (Glycyrrhiza glabra L., Fabaceae) roots. The extraction of GL was performed at a flow rate of 20 mL/min in the descending mode by using the biphasic solvent system ethyl acetate/n-butanol/water in the proportions 3/2/5 (v/v/v). Trioctylmethylammonium with chloride as a counter-ion (Al336(®)) was used as the anion extractant in the organic stationary phase and iodide, with potassium as counter-ion, was used as the displacer in the aqueous mobile phase. From 20 g of a crude extract of licorice roots, 2.2g of GL were recovered after 70 min, for a total process duration of 90 min. The combination of the centrifugal partition extractor with the ion-pair extraction mode (IP-CPE) offers promising perspectives for industrial applications in the field of natural product isolation or for the fractionation of natural complex mixtures.