Steering the Reaction Pathway of CO2 Electroreduction by Tuning the Coordination Number of Copper Catalysts.

Cu-based catalysts are optimal for the electroreduction of CO2 to generate hydrocarbon products. However, controlling product distribution remains a challenging topic. The theoretical investigations have revealed that the coordination number (CN) of Cu considerably influences the adsorption energy of *CO intermediates, thereby affecting the reaction pathway. Cu catalysts with different CNs were fabricated by reducing CuO precursors via cyclic voltammetry (Cyc-Cu), potentiostatic electrolysis (Pot-Cu), and pulsed electrolysis (Pul-Cu), respectively. High-CN Cu catalysts predominantly generate C2+ products, while low-CN Cu favors CH4 production. For instance, over the high-CN Pot-Cu, C2+ is the main product, with the Faradaic efficiency (FE) reaching 82.5% and a partial current density (j) of 514.3 mA cm-2. Conversely, the low-CN Pul(3)-Cu favors the production of CH4, achieving the highest FECH4 value of 56.7% with a jCH4 value of 234.4 mA cm-2. In situ X-ray absorption spectroscopy and Raman spectroscopy studies further confirm the different *CO adsorptions over Cu catalysts with different CN, thereby directing the reaction pathway of the CO2RR.

Synthesis of Hydroxylamine via Ketone-Mediated Nitrate Electroreduction.

Hydroxylamine (HA, NH2OH) is a critical feedstock in the production of various chemicals and materials, and its efficient and sustainable synthesis is of great importance. Electroreduction of nitrate on Cu-based catalysts has emerged as a promising approach for green ammonia (NH3) production, but the electrosynthesis of HA remains challenging due to overreduction of HA to NH3. Herein, we report the first work on ketone-mediated HA synthesis using nitrate in water. A metal-organic-framework-derived Cu catalyst was developed to catalyze the reaction. Cyclopentanone (CP) was used to capture HA in situ to form CP oxime (CP-O) with C═N bonds, which is prone to hydrolysis. HA could be released easily after electrolysis, and CP was regenerated. It was demonstrated that CP-O could be formed with an excellent Faradaic efficiency of 47.8%, a corresponding formation rate of 34.9 mg h-1 cm-2, and a remarkable carbon selectivity of >99.9%. The hydrolysis of CP-O to release HA and CP regeneration was also optimized, resulting in 96.1 mmol L-1 of HA stabilized in the solution, which was significantly higher than direct nitrate reduction. Detailed in situ characterizations, control experiments, and theoretical calculations revealed the catalyst surface reconstruction and reaction mechanism, which showed that the coexistence of Cu0 and Cu+ facilitated the protonation and reduction of *NO2 and *NH2OH desorption, leading to the enhancement for HA production.

Highly Efficient Electrosynthesis of Glycine over an Atomically Dispersed Iron Catalyst.

Glycine is a nonessential amino acid that plays a vital role in various biological activities. However, the conventional synthesis of glycine requires sophisticated procedures or toxic feedstocks. Herein, we report an electrochemical pathway for glycine synthesis via the reductive coupling of oxalic acid and nitrate or nitrogen oxides over atomically dispersed Fe-N-C catalysts. A glycine selectivity of 70.7% is achieved over Fe-N-C-700 at -1.0 V versus RHE. Synergy between the FeN3C structure and pyrrolic nitrogen in Fe-N-C-700 facilitates the reduction of oxalic acid to glyoxylic acid, which is crucial for producing glyoxylic acid oxime and glycine, and the FeN3C structure could reduce the energy barrier of *HOOCCH2NH2 intermediate formation thus accelerating the glyoxylic acid oxime conversion to glycine. This new synthesis approach for value-added chemicals using simple carbon and nitrogen sources could provide sustainable routes for organonitrogen compound production.

Catalytic Conversion of Lignin into Valuable Chemicals: Full Utilization of Aromatic Nuclei and Side Chains.

ConspectusIn recent years, significant efforts have been directed toward achieving efficient and mild lignocellulosic biomass conversion into valuable chemicals and fuels, aiming to address energy and environmental concerns and realize the goal of carbon neutrality. Lignin is one of the three primary building blocks of lignocellulose and the only aromatic renewable feedstock. However, the complex and diverse nature of lignin feedstocks, characterized by their three-dimensional, highly branched polymeric structure and intricate C-O/C-C chemical bonds, results in substantial challenges. To tackle these challenges, we carried out extensive research on selectively activating and transforming chemical bonds in lignin for chemical synthesis. In this Account, we discuss our recent progress in catalytic lignin conversion.Our work is focused on two main objectives: (i) achieving precise and selective transformation of C-O/C-C bonds in lignin (and its model compounds) and (ii) fully utilizing the aromatic nuclei and side chains present in lignin to produce valuable chemicals. Lignin consists of interconnected phenylpropanoid subunits linked by interlaced C-C/C-O bonds. To unlock the full potential of lignin, we propose the concept of "the full utilization of lignin", which encompasses both the aromatic nuclei and the side chains (e.g., methoxyl and polyhydroxypropyl groups).For the conversion of aromatic nuclei, selective activation of C-O and/or C-C bonds is crucial in synthesizing targeted aromatic products. We begin with model compounds (such as anisole, phenol, guaiacol, etc.) and then transition to protolignin feedstocks. Various reaction routes are developed, including self-supported hydrogenolysis, direct Caryl-Csp3 cleavage, coupled Caryl-Csp3 cleavage and Caryl-O hydrogenolysis, and tandem selective hydrogenation and hydrolysis processes. These tailored pathways enable high-yield and sustainable production of a wide range of aromatic (and derived) products, including arenes (benzene, toluene, alkylbenzenes), phenols, ketones, and acids.In terms of side chain utilization, we have developed innovative strategies such as selective methyl transfer, coupling depolymerization-methyl shift, selective acetyl utilization, and new activation methods such as amine-assisted prefunctionalization. These strategies enable the direct synthesis of methyl-/alkyl-derived products, such as acetic acid, 4-ethyltoluene, dimethylethylamine, and amides. Additionally, aromatic residues can be transformed into chemicals or functionalized ingredients that can serve as catalysts or functional biopolymer materials. These findings highlight promising opportunities for harnessing both the aromatic nuclei and side chains of lignin in a creative manner, thereby improving the overall atom economy of lignin upgrading.Through innovative catalyst engineering and reaction route strategies, our work achieves the sustainable and efficient production of various valuable chemicals from lignin. By integrating side chains and aromatic rings, we have successfully synthesized methyl-/alkyl-derived and aromatic-derived products with high yields. The full utilization of lignin not only minimizes waste but also opens up new possibilities for generating chemical products from lignin. These novel approaches unlock the untapped potential of lignin, expand the boundaries of lignin upgrading, and enhance the efficiency and economic viability of lignin biorefining.

Hydrothermal synthesis of long-chain hydrocarbons up to C24 with NaHCO3-assisted stabilizing cobalt.

Abiotic CO2 reduction on transition metal minerals has been proposed to account for the synthesis of organic compounds in alkaline hydrothermal systems, but this reaction lacks experimental support, as only short-chain hydrocarbons (

Nitrogenous Intermediates in NOx-involved Electrocatalytic Reactions.

Chemical manufacturing utilizing renewable sources and energy emerges as a promising path towards sustainability and carbon neutrality. The electrocatalytic reactions involving nitrogen oxides (NOx) offered a potential strategy for synthesizing various nitrogenous chemicals. However, it is currently hindered by low selectivity/efficiency and limited reaction pathways, mainly due to the difficulties in controllable generation and utilization of nitrogenous intermediates. In this minireview, focusing on nitrogenous intermediates in NOx-involved electrocatalytic reactions, we discuss newly developed methodologies for studying and controlling the generation, conversion, and utilizing of nitrogenous intermediates, which enable recent developments in NOx-involved electrocatalytic reactions that yield various products, including ammonia (NH3), organonitrogen molecules, and nitrogenous compounds exhibiting unconventional oxidation states. Furthermore, we also make an outlook to highlight future directions in the emerging field of NOx-involved electrocatalytic reactions.

Selective and Efficient CO2 Electroreduction to Formate on Copper Electrodes Modified by Cationic Gemini Surfactants.

Electroreduction of CO2 into valuable chemicals and fuels is a promising strategy to mitigate energy and environmental problems. However, it usually suffers from unsatisfactory selectivity for a single product and inadequate electrochemical stability. Herein, we report the first work to use cationic Gemini surfactants as modifiers to boost CO2 electroreduction to formate. The selectivity, activity and stability of the catalysts can be all significantly enhanced by Gemini surfactant modification. The Faradaic efficiency (FE) of formate could reach up to 96 %, and the energy efficiency (EE) could achieve 71 % over the Gemini surfactants modified Cu electrode. In addition, the Gemini surfactants modified commercial Bi2 O3 nanosheets also showed an excellent catalytic performance, and the FE of formate reached 91 % with a current density of 510 mA cm-2 using the flow cell. Detailed studies demonstrated that the double quaternary ammonium cations and alkyl chains of the Gemini surfactants played a crucial role in boosting electroreduction CO2 , which can not only stabilize the key intermediate HCOO* but also provide an easy access for CO2 . These observations could shine light on the rational design of organic modifiers for promoted CO2 electroreduction.

Efficient Electrosynthesis of Urea over Single-Atom Alloy with Electronic Metal Support Interaction.

Urea electrosynthesis from carbon dioxide (CO2) and nitrate (NO3-) is an alternative approach to traditional energy-intensive urea synthesis technology. Herein, we report a CuAu single-atom alloy (SAA) with electronic metal support interaction (EMSI), achieving a high urea yield rate of 813.6 µg h-1 mgcat-1 at -0.94 V versus reversible hydrogen electrode (vs. RHE) and a Faradaic efficiency (FE) of 45.2% at -0.74 V vs. RHE. In-situ experiments and theoretical calculations demonstrated that single-atom Cu sites modulate the adsorption behavior of intermediate species. Bimetallic sites synergistically accelerate C-N bond formation through spontaneous coupling of *CO and *NO to form *ONCO as key intermediates. More importantly, electronic metal support interaction between CuAu SAA and CeO2 carrier further modulates electron structure and interfacial microenvironment, endowing electrocatalysts with superior activity and durability. This work constructs SAA electrocatalysts with EMSI effect to tailor C-N coupling at the atomic level, which can provide guidance for the development of C-N coupling systems.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene.

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Lattice Strain Engineering Boosts CO2 Electroreduction to C2+ Products.

Regulating the binding effect between the surface of an electrode material and reaction intermediates is essential in highly efficient CO2 electro-reduction to produce high-value multicarbon (C2+) compounds. Theoretical study reveals that lattice tensile strain in single-component Cu catalysts can reduce the dipole-dipole repulsion between *CO intermediates and promotes *OH adsorption, and the high *CO and *OH coverage decreases the energy barrier for C-C coupling. In this work, Cu catalysts with varying lattice tensile strain were fabricated by electro-reducing CuO precursors with different crystallinity, without adding any extra components. The as-prepared single-component Cu catalysts were used for CO2 electro-reduction, and it is discovered that the lattice tensile strain in Cu could enhance the Faradaic efficiency (FE) of C2+ products effectively. Especially, the as-prepared CuTPA catalyst with high lattice tensile strain achieves a FEC2+ of 90.9% at -1.25 V vs. RHE with a partial current density of 486.1 mA cm-2.

Synthesis of N-propanol from CO2 Electroreduction on Bicontinuous Cu2O/Cu Nanodomains.

n-propanol is an important pharmaceutical and pesticide intermediate. To produce n-propanol by electrochemical reduction of CO2 is a promising way, but is largely restricted by the very low selectivity and activity. How to promote the coupling of *C1 and *C2 intermediates to form the *C3 intermediate for n-propanol formation is challenging. Here, we propose the construction of bicontinuous structure of Cu2O/Cu electrocatalyst, which consists of ultra-small Cu2O nanodomains, Cu nanodomains and large amounts of grain boundaries between Cu2O and Cu nanodomains. The n-propanol current density is as high as 101.6 mA cm-2 at the applied potential of -1.1 V vs. reversible hydrogen electrode in flow cell, with the Faradaic efficiency up to 12.1%. Moreover, the catalyst keeps relatively stable during electrochemical CO2 reduction process. Experimental studies and theoretical calculations reveal that the bicontinuous structure of Cu2O/Cu can facilitate the *CO formation, *CO-*CO coupling and *CO-*OCCO coupling for the final generation of n-propanol.

Cooperation of Different Active Sites to Promote CO2 Electroreduction to Multi-carbon Products at Ampere-Level.

Electroreduction of CO2 to C2+ products provides a promising strategy for reaching the goal of carbon neutrality. However, achieving high selectivity of C2+ products at high current density remains a challenge. In this work, we designed and prepared a multi-sites catalyst, in which Pd was atomically dispersed in Cu (Pd-Cu). It was found that the Pd-Cu catalyst had excellent performance for producing C2+ products from CO2 electroreduction. The Faradaic efficiency (FE) of C2+ products could be maintained at approximately 80.8 %, even at a high current density of 0.8 A cm-2 for at least 20 hours. In addition, the FE of C2+ products was above 70 % at 1.4 A cm-2. Experiments and density functional theory (DFT) calculations revealed that the catalyst had three distinct catalytic sites. These three active sites allowed for efficient conversion of CO2, water dissociation, and CO conversion, ultimately leading to high yields of C2+ products.

Alkaline Ionic Liquid Microphase Promotes Deep Reduction of CO2 on Copper.

Electrochemical reduction of CO2 to multicarbon (C2+) products using renewable energy sources is an important route to storing sustainable energy and achieving carbon neutrality. It remains a challenge to achieve high C2+ product faraday efficiency (FE) at ampere-level current densities. Herein, we propose the immobilization of an alkaline ionic liquid on copper for promoting the deep reduction of CO2. By this strategy, a C2+ FE of 81.4% can be achieved under a current density of 0.9 A·cm-2 with a half-cell energy conversion efficiency of 47.4% at -0.76 V vs reversible hydrogen electrode (RHE). Particularly, when the current density is as high as 1.8 A·cm-2, the C2+ FE reaches 71.6% at an applied potential of -1.31 V vs RHE. Mechanistic studies demonstrate that the alkaline ionic liquid plays multiple roles of improving the accumulation of CO2 molecules on the copper surface, promoting the activation of the adsorbed CO2, reducing the energy barrier of CO dimerization, stabilizing intermediates, and facilitating the C2+ product formation.

Switching between C2+ Products and CH4 in CO2 Electrolysis by Tuning the Composition and Structure of Rare-Earth/Copper Catalysts.

Rational regulation of the reaction pathway to produce the desired products is one of the most significant challenges in the electrochemical CO2 reduction reaction (CO2RR). Herein, we designed a series of rare-earth Cu catalysts with mixed phases. It was found that the products could be switched from C2+ to CH4 by tuning the composition and structure of the catalysts. Particularly at the Cu/Sm atomic ratio of 9/1 (Cu9Sm1-Ox), the Faradaic efficiency (FE) for C2+ products (FEC2+) could reach 81% at 700 mA cm-2 with negligible CH4. However, the FE of CH4 (FECH4) was 65% at 500 mA cm-2 over Cu1Sm9-Ox (Cu/Sm = 1/9), and the FEC2+ was extremely low. Experiments and theoretical studies indicated that the stable CuSm2O4 phase existed in all the catalysts within the Cu/Sm range of 9/1 to 1/9. At a high Cu content, the catalyst was composed of CuSm2O4 and Cu phases. The small amount of Sm could enhance the binding strength of *CO and facilitate C-C coupling. Conversely, at a high Sm content, the catalyst was composed of CuSm2O4 and Sm2O3 phases. Sm could effectively stabilize bivalent Cu and enrich proton donors, lowering the reaction energy of *CO for deep hydrogenation to generate CH4. In both pathways, the stable CuSm2O4 phase could cooperate with the Cu or Sm2O3 phases, which induced the formation of different microenvironments to generate different products. This strategy also had commonality with other Cu-rare-earth (La, Pr, and Eu) catalysts to boost the CO2RR for C2+ or CH4 production.

p-d Orbital Hybridization Induced by p-Block Metal-Doped Cu Promotes the Formation of C2+ Products in Ampere-Level CO2 Electroreduction.

Large-current electrolysis of CO2 to multi-carbon (C2+) products is critical to realize the industrial application of CO2 conversion. However, the poor binding strength of *CO intermediates on the catalyst surface induces multiple competing pathways, which hinder the C2+ production. Herein, we report that p-d orbital hybridization induced by Ga-doped Cu (CuGa) could promote efficient CO2 electrocatalysis to C2+ products at ampere-level current density. It was found that CuGa exhibited the highest C2+ productivity with a remarkable Faradaic efficiency (FE) of 81.5% at a current density of 0.9 A/cm2, and the potential at such a high current density was -1.07 V versus reversible hydrogen electrode. At 1.1 A/cm2, the catalyst still maintained a high C2+ productivity with an FE of 76.9%. Experimental and theoretical studies indicated that the excellent performance of CuGa results from the p-d hybridization of Cu and Ga, which not only enriches reactive sites but also enhances the binding strength of the *CO intermediate and facilitates C-C coupling. The p-d hybridization strategy can be extended to other p-block metal-doped Cu catalysts, such as CuAl and CuGe, to boost CO2 electroreduction for C2+ production. As far as we know, this is the first work to promote electrochemical CO2 reduction reaction to generate the C2+ product by p-d orbital hybridization interaction using a p-block metal-doped Cu catalyst.

Improving CO2-to-C2+ Product Electroreduction Efficiency via Atomic Lanthanide Dopant-Induced Tensile-Strained CuOx Catalysts.

Cu is a promising electrocatalyst in CO2 reduction reaction (CO2RR) to high-value C2+ products. However, as important C-C coupling active sites, the Cu+ species is usually unstable under reduction conditions. How atomic dopants affect the performance of Cu-based catalysts is interesting to be studied. Herein, we first calculated the difference between the thermodynamic limiting potentials of CO2RR and the hydrogen evolution reaction, as well as the *CO binding energy over Cu2O doped with different metals, and the results indicated that doping atomic Gd into Cu2O could improve the performance of the catalyst effectively. On the basis of the theoretical study, we designed Gd1/CuOx catalysts. The distinctive electronic structure and large ion radii of Gd not only keep the Cu+ species stable during the reaction but also induce tensile strain in Gd1/CuOx, resulting in excellent performance of the catalysts for electroreduction of CO2 to C2+ products. The Faradic efficiency of C2+ products could reach 81.4% with a C2+ product partial current density of 444.3 mA cm-2 at -0.8 V vs a reversible hydrogen electrode. Detailed experimental and theoretical studies revealed that Gd doping enhanced CO2 activation on the catalyst, stabilized the key intermediate O*CCO, and reduced the energy barrier of the C-C coupling reaction.

Ternary Ionic-Liquid-Based Electrolyte Enables Efficient Electro-reduction of CO2 over Bulk Metal Electrodes.

Using bulk metals as catalysts to get high efficiency in electro-reduction of CO2 is ideal but challenging. Here, we report the coupling of bulk metal electrodes and a ternary ionic-liquid-based electrolyte, 1-butyl-3-methylimidazolium tetrafluoroborate/1-dodecyl-3-methylimidazolium tetrafluoroborate/MeCN to realize highly efficient electro-reduction of CO2 to CO. Over various bulk metal electrodes, the ternary electrolyte not only increases the current density but also suppresses the hydrogen evolution reaction to obtain a high Faradaic efficiency (FE) toward CO. FECO could maintain ∼100% over a wide potential range, and metal electrodes showed very high stability in the ternary electrolyte. It is demonstrated that the aggregation behavior of the ternary electrolyte and the arrangement of two kinds of IL cations with different chain lengths in the electrochemical double layer not only increase the wettability to electrode and CO2 adsorption but also extend the diffusion channel of H+, rendering the high current density and FECO.

Selective Etching of Metal-Organic Frameworks for Open Porous Structures: Mass-Efficient Catalysts with Enhanced Oxygen Reduction Reaction for Fuel Cells.

Fe-Nx-C-based single-atom (SA-Fe-N-C) catalysts have shown favorable oxygen reduction reaction (ORR) activity. However, their application in proton exchange membrane fuel cells is hindered by reduced performance owing to the thick catalyst layer, restricting mass transfer and the O2 supply. Metal-organic frameworks (MOFs) are a promising class of crystal materials, but their narrow pores exacerbate the sluggish mass-transport properties within the catalyst layer. This study developed an approach for constructing an open-pore structure in MOFs via chelation-assisted selective etching, resulting in atomically dispersed Fe atoms anchored on an N, S co-doped carbon framework. The open-pore structure reduces oxygen transport resistance in the membrane electrode assembly (MEA) with unprecedented ORR activity and stability, as evidenced by finite element simulations. In an acidic electrolyte, the OP-Fe-NC catalyst shows a half-wave potential of 0.89 V vs RHE, surpassing Pt/C by 20 mV, and a current density of 29 mA cm-2 at 0.9 ViR-free in the MEA. This study provides an effective structural strategy for fabricating electrocatalysts with high mass efficiency and atomic precision for energy storage and conversion devices.

Selective Electrochemical Oxidation of Benzylic C-H to Benzylic Alcohols with the Aid of Imidazolium Radical Mediators.

Selective oxidation of benzylic C-H to benzylic alcohols is a well-known challenge in the chemical community since benzylic C-H is more prone to be overoxidized to benzylic ketones. In this work, we report the highly selective electro-oxidation of benzylic C-H to benzylic alcohols in an undivided cell in ionic liquid-based solution. As an example, the selectivity toward xanthydrol could be as high as 95.7% at complete conversion of xanthene, a typical benzylic C-H compound, on gram-scale in imidazolium bromide/H2O/DMF. Mechanism investigation reveals that the imidazolium radical generated in situ participants in a proton-coupled electron transfer process and low-barrier hydrogen bonds stabilize the reaction intermediates, together steering the redox equilibrium, favoring benzylic alcohols over benzylic ketones.

Oxophilicity-Controlled CO2 Electroreduction to C2+ Alcohols over Lewis Acid Metal-Doped Cuδ+ Catalysts.

Cu-based electrocatalysts have great potential for facilitating CO2 reduction to produce energy-intensive fuels and chemicals. However, it remains challenging to obtain high product selectivity due to the inevitable strong competition among various pathways. Here, we propose a strategy to regulate the adsorption of oxygen-associated active species on Cu by introducing an oxophilic metal, which can effectively improve the selectivity of C2+ alcohols. Theoretical calculations manifested that doping of Lewis acid metal Al into Cu can affect the C-O bond and Cu-C bond breaking toward the selectively determining intermediate (shared by ethanol and ethylene), thus prioritizing the ethanol pathway. Experimentally, the Al-doped Cu catalyst exhibited an outstanding C2+ Faradaic efficiency (FE) of 84.5% with remarkable stability. In particular, the C2+ alcohol FE could reach 55.2% with a partial current density of 354.2 mA cm-2 and a formation rate of 1066.8 µmol cm-2 h-1. A detailed experimental study revealed that Al doping improved the adsorption strength of active oxygen species on the Cu surface and stabilized the key intermediate *OC2H5, leading to high selectivity toward ethanol. Further investigation showed that this strategy could also be extended to other Lewis acid metals.