Scalable Design of Ru-Embedded Carbon Fabric Using Conventional Carbon Fiber Processing for Robust Electrocatalysts.

Metal-carbon composites are extensively utilized as electrochemical catalysts but face critical challenges in mass production and stability. We report a scalable manufacturing process for ruthenium surface-embedded fabric electrocatalysts (Ru-SFECs) via conventional fiber/fabric manufacturing. Ru-SFECs have excellent catalytic activity and stability toward the hydrogen evolution reaction, exhibiting a low overpotential of 11.9 mV at a current density of 10 mA cm-2 in an alkaline solution (1.0 M aq KOH solution) with only a slight overpotential increment (6.5%) after 10,000 cycles, whereas under identical conditions, that of commercial Pt/C increases 6-fold (from 1.3 to 7.8 mV). Using semipilot-scale equipment, a protocol is optimized for fabricating continuous self-supported electrocatalytic electrodes. Tailoring the fiber processing parameters (tension and temperature) can optimize the structural development, thereby achieving good catalytic performance and mechanical integrity. These findings underscore the significance of self-supporting catalysts, offering a general framework for stable, binder-free electrocatalytic electrode design.

One-Pot Direct Mechanochemical Silicon Replacement of Sodium Fluorosilicate into Sodium Fluorozirconate and Functionalization of Graphite for Enhanced Sodium-Ion Storage.

Efficient sodium ion storage in graphite is as yet unattainable, because of the thermodynamic instability of sodium ion intercalates-graphite compounds. In this work, sodium fluorozirconate (Na3ZrF7, SFZ) functionalized graphite (SFZ-G) is designed and prepared by the in situ mechanochemical silicon (Si) replacement of sodium fluorosilicate (Na2SiF6, SFS) and functionalization of graphite at the same time. During the mechanochemical process, the atomic Si in SFS is directly replaced by atomic zirconium (Zr) from the zirconium oxide (ZrO2) balls and container in the presence of graphite, forming SFZ-G. The resulting SFZ-G, working as an anode material for sodium ion storage, shows a significantly enhanced capacity of 418.7 mAh g-1 at 0.1 C-rate, compared to pristine graphite (35 mAh g-1) and simply ball-milled graphite (BM-G, 200 mAh g-1). In addition, the SFZ-G exhibits stable sodium-ion storage performance with 86% of its initial capacity retention after 1000 cycles at 2.0 C-rate.

Benzoquinone-Lubricated Intercalation in Manganese Oxide for High-Capacity and High-Rate Aqueous Aluminum-Ion Battery.

Aqueous aluminum-ion batteries are attractive post-lithium battery technologies for large-scale energy storage in virtue of abundant and low-cost Al metal anode offering ultrahigh capacity via a three-electron redox reaction. However, state-of-the-art cathode materials are of low practical capacity, poor rate capability, and inadequate cycle life, substantially impeding their practical use. Here layered manganese oxide that is pre-intercalated with benzoquinone-coordinated aluminum ions (BQ-AlxMnO2) as a high-performance cathode material of rechargeable aqueous aluminum-ion batteries is reported. The coordination of benzoquinone with aluminum ions not only extends interlayer spacing of layered MnO2 framework but reduces the effective charge of trivalent aluminum ions to diminish their electrostatic interactions, substantially boosting intercalation/deintercalation kinetics of guest aluminum ions and improving structural reversibility and stability. When coupled with Zn50Al50 alloy anode in 2 m Al(OTf)3 aqueous electrolyte, the BQ-AlxMnO2 exhibits superior rate capability and cycling stability. At 1 A g-1, the specific capacity of BQ-AlxMnO2 reaches ≈300 mAh g-1 and retains ≈90% of the initial value for more than 800 cycles, along with the Coulombic efficiency of as high as ≈99%, outperforming the AlxMnO2 without BQ co-incorporation.

In Situ Engineering Multifunctional Active Sites of Ruthenium-Nickel Alloys for pH-Universal Ampere-Level Current-Density Hydrogen Evolution.

Developing robust non-platinum electrocatalysts with multifunctional active sites for pH-universal hydrogen evolution reaction (HER) is crucial for scalable hydrogen production through electrochemical water splitting. Here ultra-small ruthenium-nickel alloy nanoparticles steadily anchored on reduced graphene oxide papers (Ru-Ni/rGOPs) as versatile electrocatalytic materials for acidic and alkaline HER are reported. These Ru-Ni alloy nanoparticles serve as pH self-adaptive electroactive species by making use of in situ surface reconstruction, where surface Ni atoms are hydroxylated to produce bifunctional active sites of Ru-Ni(OH)2 for alkaline HER, and selectively etched to form monometallic Ru active sites for acidic HER, respectively. Owing to the presence of Ru-Ni(OH)2 multi-site surface, which not only accelerates water dissociation to generate reactive hydrogen intermediates but also facilitates their recombination into hydrogen molecules, the self-supported Ru90Ni10/rGOP hybrid electrode only takes overpotential of as low as ≈106 mV to deliver current density of 1000 mA cm-2, and maintains exceptional stability for over 1000 h in 1 m KOH. While in 0.5 m H2SO4, the Ru90Ni10/rGOP hybrid electrode exhibits acidic HER catalytic behavior comparable to commercially available Pt/C catalyst due to the formation of monometallic Ru shell. These electrochemical behaviors outperform some of the best Ru-based catalysts and make it attractive alternative to Pt-based catalysts toward highly efficient HER.

Dynamic Molecular Interphases Regulated by Trace Dual Electrolyte Additives for Ultralong-Lifespan and Dendrite-Free Zinc Metal Anode.

Metallic zinc is a promising anode material for rechargeable aqueous multivalent metal-ion batteries due to its high capacity and low cost. However, the practical use is always beset by severe dendrite growth and parasitic side reactions occurring at anode/electrolyte interface. Here we demonstrate dynamic molecular interphases caused by trace dual electrolyte additives of D-mannose and sodium lignosulfonate for ultralong-lifespan and dendrite-free zinc anode. Triggered by plating and stripping electric fields, the D-mannose and lignosulfonate species are alternately and reversibly (de-)adsorbed on Zn metal, respectively, to accelerate Zn2+ transportation for uniform Zn nucleation and deposition and inhibit side reactions for high Coulombic efficiency. As a result, Zn anode in such dual-additive electrolyte exhibits highly reversible and dendrite-free Zn stripping/plating behaviors for >6400 hours at 1 mA cm-2, which enables long-term cycling stability of Zn||ZnxMnO2 full cell for more than 2000 cycles.

Out-of-Plane Single-Copper-Site Catalysts for Room-Temperature Benzene Oxidation.

Crafting single-atom catalysts (SACs) that possess "just right" modulated electronic and geometric structures, granting accessible active sites for direct room-temperature benzene oxidation is a coveted objective. However, achieving this goal remains a formidable challenge. Here, we introduce an innovative in situ phosphorus-immitting strategy using a new phosphorus source (phosphorus nitride, P3N5) to construct the phosphorus-rich copper (Cu) SACs, designated as Cu/NPC. These catalysts feature locally protruding metal sites on a nitrogen (N)-phosphorus (P)-carbon (C) support (NPC). Rigorous analyses, including X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS), validate the coordinated bonding of nitrogen and phosphorus with atomically dispersed Cu sites on NPC. Crucially, systematic first-principles calculations, coupled with the climbing image nudged-elastic-band (CI-NEB) method, provide a comprehensive understanding of the structure-property-activity relationship of the distorted Cu-N2P2 centers in Cu/NPC for selective oxidation of benzene to phenol production. Interestingly, Cu/NPC has shown more energetically favorable C-H bond activation compared to the benchmark Cu/NC SACs in the direct oxidation of benzene, resulting in outstanding benzene conversion (50.3 %) and phenol selectivity (99.3 %) at room temperature. Furthermore, Cu/NPC achieves a remarkable turnover frequency of 263 h-1 and mass-specific activity of 35.2 mmol g-1 h-1, surpassing the state-of-the-art benzene-to-phenol conversion catalysts to date.

Nanocatalytic Materials for Energy-Related Small-Molecules Conversions: Active Site Design, Identification and Structure-Performance Relationship Discovery.

The catalytic conversion of energy-related small-molecules is a critical process in the fields of chemical production, environmental restoration, and energy conversion and storage. Over the years, numerous nanocatalytic materials have been explored in efforts to substantially boost the inherently sluggish catalytic processes. Despite achievements, the lack of fundamental insights into the design and identification of active sites and the structure-performance relationship has been one of the main obstacles to further improvement in catalytic performance. With the development of first-principles density functional theory (DFT) calculations and state-of-art spectroscopic techniques, the pace of research has started to move forward again.In this Account, we illustrate our recent representative attempts to gain fundamental insights into the rational development of efficient nanocatalytic materials and thus boost the typical electrochemical and mechanochemical conversions of energy-related small-molecules, including for the hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and ammonia synthesis. DFT calculations and advanced spectroscopic techniques, such as synchrotron radiation-based X-ray absorption spectroscopy (XAS, hard and soft X-ray), were properly adopted for this purpose.Specifically, to achieve a fast-electrochemical hydrogen evolution process, Ir active sites with balanced hydrogen adsorption/desorption behaviors were first computationally designed via orbital modulation and experimentally identified, and they showed significantly enhanced catalytic activity toward HER in acidic media. For the electrochemical reduction of oxygen, well-designed Zn-N2 active sites and quinone functional groups were introduced into the different carbon matrixes and structurally identified by the XAS technique, utilizing hard and soft X-rays, respectively. Both experimental and DFT studies revealed that Zn-N2 active sites with their unique structure can greatly activate the adsorbed oxygen species, leading to a highly efficient and selective four-electron oxygen reduction pathway, while the quinone functional groups are able to modify the activation mode and alter it into a selective two-electron oxygen reduction pathway for H2O2 production.In another study, inspired by the dissociation of stable nitrogen molecules on the surface of Fe, dynamic strained Fe active sites were designed for mechanochemical ammonia synthesis. Combined XAS and Mössbauer spectroscopy revealed the formation of a short-range Fe4N structure by the Fe active sites and dissociated nitrogen during the ball milling process, facilitating robust hydrogenation and ammonia production under mild conditions.Thanks to the theoretical methods and advanced spectroscopic techniques, fundamental insights into the design and identification of active sites and understanding of the structure-performance relationship can be easily obtained using such tools, which will guide the development of nanocatalytic materials and boost the conversions of energy-related small-molecules for various applications.

Conductive and Ultrastable Covalent Organic Framework/Carbon Hybrid as an Ideal Electrocatalytic Platform.

Developing covalent organic frameworks (COFs) with good electrical conductivity is essential to widen their range of practical applications. Thermal annealing is known to be a facile approach for enhancing conductivity. However, at higher temperatures, most COFs undergo amorphization and/or thermal degradation because of the lack of linker rigidity and physicochemical stability. Here, we report the synthesis of a conductive benzoxazole-linked COF/carbon hybrid material (BCOF-600C) by simple thermal annealing. The fused-aromatic benzoxazole and biphenyl building units endow the resulting COF with excellent physicochemical stability against high temperatures and strong acids/bases. This allows heat treatment to further enhance electrical conductivity with minimal structural alteration. The robust crystalline structure with periodically incorporated nitrogen atoms allowed platinum (Pt) atoms to be atomically integrated into the channel walls of BCOF-600C. The resulting electrocatalyst with well-defined active sites exhibited superior catalytic performance toward hydrogen evolution in acidic media.

Extreme Enhancement of Carbon Hydrogasification via Mechanochemistry.

Carbon hydrogasification is the slowest reaction among all carbon-involved small-molecule transformations. Here, we demonstrate a mechanochemical method that results in both a faster reaction rate and a new synthesis route. The reaction rate was dramatically enhanced by up to 4 orders of magnitude compared to the traditional thermal method. Simultaneously, the reaction exhibited very high selectivity (99.8 % CH4 , versus 80 % under thermal conditions) with a cobalt catalyst. Our study demonstrated that this extreme increase in reaction rate originates from the continuous activation of reactive carbon species via mechanochemistry. The high selectivity is intimately related to the activation at low temperature, at which higher hydrocarbons are difficult to form. This work is expected to advance studies of carbon hydrogasification, and other solid-gas reactions.

Revealing Isolated M-N3 C1 Active Sites for Efficient Collaborative Oxygen Reduction Catalysis.

Single atom catalysts (SACs) are of great importance for oxygen reduction, a critical process in renewable energy technologies. The catalytic performance of SACs largely depends on the structure of their active sites, but explorations of highly active structures for SAC active sites are still limited. Herein, we demonstrate a combined experimental and theoretical study of oxygen reduction catalysis on SACs, which incorporate M-N3 C1 site structure, composed of atomically dispersed transition metals (e.g., Fe, Co, and Cu) in nitrogenated carbon nanosheets. The resulting SACs with M-N3 C1 sites exhibited prominent oxygen reduction catalytic activities in both acidic and alkaline media, following the trend Fe-N3 C1 > Co-N3 C1 > Cu-N3 C1 . Theoretical calculations suggest the C atoms in these structures behave as collaborative adsorption sites to M atoms, thanks to interactions between the d/p orbitals of the M/C atoms in the M-N3 C1 sites, enabling dual site oxygen reduction.

Defect-Free Encapsulation of Fe0 in 2D Fused Organic Networks as a Durable Oxygen Reduction Electrocatalyst.

Because they provide lower cost but comparable activity to precious platinum (Pt)-based catalysts, nonprecious iron (Fe)-based materials, such as Fe/Fe3C and Fe-N-C, have gained considerable attention as electrocatalysts for the oxygen reduction reaction (ORR). However, their practical application is hindered by their poor stability, which is attributed to the defective protection of extremely unstable Fe nanoparticles. Here, we introduce a synthesis strategy for a stable Fe-based electrocatalyst, which was realized by defect-free encapsulation of Fe nanoparticles using a two-dimensional (2D) phenazine-based fused aromatic porous organic network (Aza-PON). The resulting Fe@Aza-PON catalyst showed electrocatalytic activity (half-wave potential, 0.839 V; Tafel slope, 60 mV decade-1) comparable to commercial Pt on activated carbon (Pt/C, 0.826 V and 90 mV decade-1). More importantly, the Fe@Aza-PON displayed outstanding stability (zero current loss even after 100 000 cycles) and tolerance against contamination (methanol and CO poisoning). In a hybrid Li-air battery test, the Fe@Aza-PON demonstrated performance superior to Pt/C.

Construction of Porous Mo3 P/Mo Nanobelts as Catalysts for Efficient Water Splitting.

A novel synthesis strategy is demonstrated to prepare Mo3 P/Mo nanobelts with porous structure for the first time. The growth and formation mechanism of the porous Mo3 P/Mo nanobelt structure was disclosed by varying the contents of H2 /PH3 and the reaction temperature. During the hydrogen evolution reaction (HER) catalysis, the optimized porous Mo3 P/Mo nanobelts exhibited a small overpotential of 78 mV at a current density of 10 mA cm-2 and a low Tafel slope of 43 mV dec-1 , as well as long-term stability in alkaline media, surpassing Pt wire. Density functional theory (DFT) calculations reveal that the H2 O dissociation on the surface of Mo3 P is favorable during the HER.

Porous Cobalt Phosphide Polyhedrons with Iron Doping as an Efficient Bifunctional Electrocatalyst.

Iron (Fe)-doped porous cobalt phosphide polyhedrons are designed and synthesized as an efficient bifunctional electrocatalyst for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The synthesis strategy involves one-step route for doping foreign metallic element and forming porous cobalt phosphide polyhedrons. With varying doping levels of Fe, the optimized Fe-doped porous cobalt phosphide polyhedron exhibits significantly enhanced HER and OER performances, including low onset overpotentials, large current densities, as well as small Tafel slopes and good electrochemical stability during HER and OER.

Recent Advances in Iridium-based Electrocatalysts for Acidic Electrolyte Oxidation.

Ongoing research to develop advanced electrocatalysts for the oxygen evolution reaction (OER) is needed to address demand for efficient energy conversion and carbon-free energy sources. In the OER process, acidic electrolytes have higher proton concentration and faster response than alkaline ones, but their harsh strongly acidic environment requires catalysts with greater corrosion and oxidation resistance. At present, iridium oxide (IrO2) with its strong stability and excellent catalytic performance is the catalyst of choice for the anode side of commercial PEM electrolysis cells. However, the scarcity and high cost of iridium (Ir) and the unsatisfactory activity of IrO2 hinder industrial scale application and the sustainable development of acidic OER catalytic technology. This highlights the importance of further research on acidic Ir-based OER catalysts. In this review, recent advances in Ir-based acidic OER electrocatalysts are summarized, including fundamental understanding of the acidic OER mechanism, recent insights into the stability of acidic OER catalysts, highly efficient Ir-based electrocatalysts, and common strategies for optimizing Ir-based catalysts. The future challenges and prospects of developing highly effective Ir-based catalysts are also discussed.

Metal-Based Oxygen Reduction Electrocatalysts for Efficient Hydrogen Peroxide Production.

Hydrogen peroxide (H2O2) is a high-value chemical widely used in electronics, textiles, paper bleaching, medical disinfection, and wastewater treatment. Traditional production methods, such as the anthraquinone oxidation process and direct synthesis, require high energy consumption, and involve risks from toxic substances and explosions. Researchers are now exploring photochemical, electrochemical, and photoelectrochemical synthesis methods to reduce energy use and pollution. This review focuses on the 2-electron oxygen reduction reaction (2e- ORR) for the electrochemical synthesis of H2O2, and discusses how catalyst active sites influence O2 adsorption. Strategies to enhance H2O2 selectivity by regulating these sites are presented. Catalysts require strong O2 adsorption to initiate reactions and weak *OOH adsorption to promote H2O2 formation. The review also covers advances in single-atom catalysts (SACs), multi-metal-based catalysts, and highlights non-noble metal oxides, especially perovskite oxides, for their versatile structures and potential in 2e- ORR. The potential of localized surface plasmon resonance (LSPR) effects to enhance catalyst performance is also discussed. In conclusion, emphasis is placed on optimizing catalyst structures through theoretical and experimental methods to achieve efficient and selective H2O2 production, aiming for sustainable and commercial applications.

High-capacity, fast-charging and long-life magnesium/black phosphorous composite negative electrode for non-aqueous magnesium battery.

Secondary non-aqueous magnesium-based batteries are a promising candidate for post-lithium-ion battery technologies. However, the uneven Mg plating behavior at the negative electrode leads to high overpotential and short cycle life. Here, to circumvent these issues, we report the preparation of a magnesium/black phosphorus (Mg@BP) composite and its use as a negative electrode for non-aqueous magnesium-based batteries. Via in situ and ex situ physicochemical measurements, we demonstrate that Mg ions are initially intercalated in black phosphorus two-dimensional structures, forming chemically stable MgxP intermediates. After the formation of the intermediates, Mg electrodeposition reaction became the predominant. When tested in the asymmetric coin cell configuration, the Mg@BP composite electrode allowed stable stripping/plating performances for 1600 h (800 cycles), a cumulative capacity of 3200 mAh cm-2, and a Coulombic efficiency of 99.98%. Assembly and testing of the Mg@BP | |nano-CuS coin cell enabled a discharge capacity of 398 mAh g-1 and an average cell discharge potential of about 1.15 V at a specific current of 560 mA g-1 with a low decay rate of 0.016% per cycle for 225 cycles at 25 °C.

Dual-Intermetallic Heterostructure on Hierarchical Nanoporous Metal for Highly Efficient Alkaline Hydrogen Electrocatalysis.

Constructing well-defined active multisites is an effective strategy to break linear scaling relationships to develop high-efficiency catalysts toward multiple-intermediate reactions. Here, dual-intermetallic heterostructure composed of tungsten-bridged Co3W and WNi4 intermetallic compounds seamlessly integrated on hierarchical nanoporous nickel skeleton is reported as a high-performance nonprecious electrocatalyst for alkaline hydrogen evolution and oxidation reactions. By virtue of interfacial tungsten atoms configuring contiguous multisites with proper adsorptions of hydrogen and hydroxyl intermediates to accelerate water dissociation/combination and column-nanostructured nickel skeleton facilitating electron and ion/molecule transportations, nanoporous nickel-supported Co3W-WNi4 heterostructure exhibits exceptional hydrogen electrocatalysis in alkaline media, with outstanding durability and impressive catalytic activities for hydrogen oxidation reaction (geometric exchange current density of ≈6.62 mA cm-2) and hydrogen evolution reaction (current density of ≈1.45 A cm-2 at overpotential of 200 mV). Such atom-ordered intermetallic heterostructure alternative to platinum group metals shows genuine potential for hydrogen production and utilization in hydroxide-exchange-membrane water electrolyzers and fuel cells.

Lamellar Nanoporous Metal/Intermetallic Compound Heterostructure Regulating Dendrite-Free Zinc Electrodeposition for Wide-Temperature Aqueous Zinc-Ion Battery.

Aqueous zinc-ion batteries are attractive post-lithium battery technologies for grid-scale energy storage because of their inherent safety, low cost and high theoretical capacity. However, their practical implementation in wide-temperature surroundings persistently confronts irregular zinc electrodeposits and parasitic side reactions on metal anode, which leads to poor rechargeability, low Coulombic efficiency and short lifespan. Here, this work reports lamellar nanoporous Cu/Al2Cu heterostructure electrode as a promising anode host material to regulate high-efficiency and dendrite-free zinc electrodeposition and stripping for wide-temperatures aqueous zinc-ion batteries. In this unique electrode, the interconnective Cu/Al2Cu heterostructure ligaments not only facilitate fast electron transfer but work as highly zincophilic sites for zinc nucleation and deposition by virtue of local galvanic couples while the interpenetrative lamellar channels serving as mass transport pathways. As a result, it exhibits exceptional zinc plating/stripping behaviors in aqueous hybrid electrolyte of diethylene glycol dimethyl ether and zinc trifluoromethanesulfonate at wide temperatures ranging from 25 to -30 °C, with ultralow voltage polarizations at various current densities and ultralong lifespan of >4000 h. The outstanding electrochemical properties enlist full cell of zinc-ion batteries constructed with nanoporous Cu/Al2Cu and ZnxV2O5/C to maintain high capacity and excellent stability for >5000 cycles at 25 and -30 °C.

Mechanochemical Ammonia Synthesis: Old is New Again.

Hydrogen is a promising clean energy source, an alternative to fossil fuels, and can potentially play a crucial role in reducing carbon emissions. The transportation and storage of hydrogen are the biggest hurdles to realizing a hydrogen economy. Ammonia is considered to be one of the most promising hydrogen carriers, because of its high hydrogen content and easy liquefaction in mild conditions. To date, ammonia is mostly produced by the 'thermocatalytic' Haber-Bosch process, which requires high temperature and pressure. As a result, it can only produce ammonia in 'centralized' manufacturing systems. Mechanochemistry, a newly emerging method for efficient ammonia synthesis, offers potential advantages over the Haber-Bosch process. Mechanochemical ammonia synthesis under near ambient conditions can be connected with 'localized' sustainable energy systems. In this perspective, the state-of-the-art mechanochemical ammonia synthesis processes will be introduced. Challenges and opportunities are also discussed in relation to its role in a hydrogen economy.

Rhodium and Carbon Sites with Strong d-p Orbital Interaction for Efficient Bifunctional Catalysis.

Efficient and stable catalysts are highly desired for the electrochemical conversion of hydrogen, oxygen, and water molecules, processes which are crucial for renewable energy conversion and storage technologies. Herein, we report the development of hollow nitrogenated carbon sphere (HNC) dispersed rhodium (Rh) single atoms (Rh1HNC) as an efficient catalyst for bifunctional catalysis. The Rh1HNC was achieved by anchoring Rh single atoms in the HNC matrix with an Rh-N3C1 configuration, via a combination of in situ polymerization and carbonization approach. Benefiting from the strong metal atom-support interaction (SMASI), the Rh and C atoms can collaborate to achieve robust electrochemical performance toward both the hydrogen evolution and oxygen reduction reactions in acidic media. This work not only provides an active site with favorable SMASI for bifunctional catalysis but also brings a strategy for the design and synthesis of efficient and stable bifunctional catalysts for diverse applications.