Piezoluminescence from ferroelectric Ca3Ti2O7:Pr3+ long-persistent phosphor.

A variety of up-and-coming applications of piezoluminescence in artificial skins, structural health diagnosis, and mechano-driven lightings and displays recently have triggered an intense research effort to design and develop new piezoluminescent materials. In this work, we deduced and verified an efficient piezoluminescence in ferroelectric Ca3Ti2O7:Pr3+ long-persistent phosphor, in view of three fundamental elements forming piezoluminescence - piezoelectricity, luminescent centers and carrier traps. Under the stimulation of mechanical actions including compression and friction, Ca3Ti2O7:Pr3+ shows an intense red emission from 1D2-3H4 transition of Pr3+. On the basis of investigations on structural and optical characteristics especially photoluminescence, persistent luminescence and thermoluminescence, we finally proposed a possible piezoluminescent mechanism in Ca3Ti2O7:Pr3+. Our research is expected to expand the horizon of existing piezoluminescent materials, accelerating the development and application of new materials.

Multicolor Tuning in Room-Temperature Self-Activated Ca2 Nb2 O7 Submicroplates by Lanthanide Doping.

Self-activated phosphors are capable of generating optical emissions from the internal ion groups of host lattice before externally introducing luminescent ions. However, numerous self-activated phosphors only show luminescence at low temperature due to the thermally activated energy migration among ion groups at room temperature, severely confining their application conditions. In this letter, we propose a strategy to converting the low-temperature luminescence to a room-temperature one through changing the synthesis conditions to induce structural distortions and thus to limit energy migration. Room-temperature self-activated luminescence of Ca2 Nb2 O7 was accordingly achieved in submicroplates synthesized using the sol-gel method. By further coupling the blue broadband emission from Ca2 Nb2 O7 submicroplates with the characteristic luminescence of Ln3+ (Pr3+ , Sm3+ , and Dy3+ ) dopants, multicolor emissions were successively tuned through adjusting the concentration of Ln3+ . Our results are expected to expand the scope of designing room-temperature self-activated phosphors and tuning multicolor emission.

Determining layer number of two-dimensional flakes of transition-metal dichalcogenides by the Raman intensity from substrates.

Transition-metal dichalcogenide (TMD) semiconductors have been widely studied due to their distinctive electronic and optical properties. The property of TMD flakes is a function of their thickness, or layer number (N). How to determine the N of ultrathin TMD materials is of primary importance for fundamental study and practical applications. Raman mode intensity from substrates has been used to identify the N of intrinsic and defective multilayer graphenes up to N = 100. However, such analysis is not applicable to ultrathin TMD flakes due to the lack of a unified complex refractive index (ñ) from monolayer to bulk TMDs. Here, we discuss the N identification of TMD flakes on the SiO2/Si substrate by the intensity ratio between the Si peak from 100 nm (or 89 nm) SiO2/Si substrates underneath TMD flakes and that from bare SiO2/Si substrates. We assume the real part of ñ of TMD flakes as that of monolayer TMD and treat the imaginary part of ñ as a fitting parameter to fit the experimental intensity ratio. An empirical ñ, namely, ñ(eff), of ultrathin MoS2, WS2 and WSe2 flakes from monolayer to multilayer is obtained for typical laser excitations (2.54 eV, 2.34 eV or 2.09 eV). The fitted ñ(eff) of MoS2 has been used to identify the N of MoS2 flakes deposited on 302 nm SiO2/Si substrate, which agrees well with that determined from their shear and layer-breathing modes. This technique of measuring Raman intensity from the substrate can be extended to identify the N of ultrathin 2D flakes with N-dependent ñ. For application purposes, the intensity ratio excited by specific laser excitations has been provided for MoS2, WS2 and WSe2 flakes and multilayer graphene flakes deposited on Si substrates covered by a 80-110 nm or 280-310 nm SiO2 layer.

Electrical conduction mechanism of an individual polypyrrole nanowire at low temperatures.

Conducting polypyrrole (PPY) nanowires doped with p-toluene sulfonamide (PTSA) were synthesized by a template-free self-assembly method. Electrical transport characteristics, i.e. current-voltage (I-V) behavior, of an individual PPY/PTSA nanowire have been explored in a wide temperature range from 300 down to 40 K. The fitting results of I-V curves indicated that the electrical conduction mechanism can be explained by the space-charge-limited current (SCLC) theory from 300 down to 100 K. In this temperature range, traps play an important role for this non-crystalline system. The corresponding trap energy and trap concentration have also been calculated based on the SCLC theory. Interestingly, there is no trap at 160 K, different from other temperatures. The obtained carrier mobility for the polymer nanowires is 0.964 cm(2) V(-1) s(-1) on the basis of trap free SCLC theory. In the temperature range of 80-40 K, little current can flow through the nanowire especially at lower voltages, however, the current follows the equation I ∞ (V/Vt-1)(ζ) at higher bias, which could be attributed to Coulomb blockade effect. Additionally, the differential conductance dI/dV curves also show some clear Coulomb oscillations.

Amorphous Fe2O3 Anchored on N-Doped Graphene with Internal Micro-Channels as an Active and Durable Anode for Sodium-Ion Batteries.

The reduced graphene oxide (rGO) exhibits outstanding electrical conductivity and a high specific surface area, making it a promising material for various applications. Fe2O3 is highly desirable due to its significant theoretical capacity and cost-effectiveness, high abundance, and environmental friendliness. However, the performance of these r-GO/Fe2O3 composite electrodes still needs to be further improved, especially in terms of cycle stability. The composite of Fe2O3 anchored on N-doped graphene with inside micro-channels (Fe2O3@N-GIMC) was used to be efficiently prepared. Because the inside channels can furnish extra transmission pathways and absorption websites and the interconnected structure can efficaciously forestall pulverization and aggregation of electrode materials. In addition, N doping is also beneficial to improve its electrochemical performance. Thus, it demonstrates exceptional sodium storage characteristics, including notable electrochemical activity, impressive initial Coulombic efficiency, and favorable rate performance. The optimized Fe2O3@N-GIMC indicates outstanding discharge capacity (573.5 mAh g-1 at 1 A g-1), significant rate performance (333.6 mAh g-1 at 8 A g-1), and stable long-term cycle durability (308.9 mAh g-1 after 1000 cycles at 1 A g-1, 200.8 mAh g-1 after 4000 cycles at 1 A g-1) as a sodium-ion battery anode. This presents a new approach for preparing graphene-based high-functional composites and lays a stable basis for further expanding its application field.

Preparation and Peculiar Magnetic Properties at Low Temperatures of La1.85Sr0.15CuO4 Nanofibers.

Herein, the preparation process, morphology, structure, and magnetic properties of La1.85Sr0.15CuO4 (LSCO) cobweb-like nanofibers are reported. LSCO nanofibers with a regular grain size distribution are successfully prepared via electrospinning, followed by calcination. We conducted morphology analysis and elemental distribution using electron microscopy and energy-dispersive X-ray spectroscopy (EDS), respectively. Additionally, magnetic property testing was performed using a vibrating sample magnetometer (VSM) to confirm the superconducting properties of the samples. Interestingly, our samples exhibited a superconducting transition temperature, Tc, of 25.21 K, which showed some disparity compared to similar works. Furthermore, we observed a ferromagnetic response at low temperatures in the superconducting nanofibers. We attribute these phenomena to the effects generated by surface states of nanoscale superconducting materials.

[Preventive effects of jinghua weikang capsule on NSAID-induced injury to the mucosa of the small intestine: an experimental research].

OBJECTIVE: To study the preventive effects of jinghua weikang capsule (JWC) on nonsteroidal anti-inflammatory drugs (NSAIDs) induced injury to the mucosa of the small intestine. METHODS: Thirty-two Wistar rats were randomly divided into four groups, i.e., the blank control group, the model group, the JWC group, and the esomeprazole group. Diclofenac was administered to rats in the model group, the JWC group, and the esomeprazole group at the daily dose of 15 mg/kg. JWC and esomeprazole was respectively given to those in the JWC group, and the esomeprazole group one day ahead. Normal saline was given to rats in the blank control group. Rats were killed 3 days later. The pathological changes of the small intestine were observed by hematoxylin and eosin stain. RESULTS: Compared with the blank control group, the general score for the small intestine (4.63 +/-0.52 vs 0.00 +/-0. 00) and the pathological score (4.00 +/-0.90 vs 0.00 +/-0. 00) obviously increased in the model group, showing statistical difference (P <0.05). Compared with the model group, the general score for the small intestine (1.88 +/-0.99) and the pathological score (2.11 +/-1.11) obviously decreased in the JWG group, showing statistical difference (P <0.05). Compared with the model group, the general score for the small intestine (2.75 +/-1.28) and the pathological score (2. 30 +/-0.94) obviously decreased in the esomeprazole group, showing statistical difference (P <0.05). CONCLUSION: JWC could prevent NSAIDs induced injury to the mucosa of the small intestine.

Intralayer Phonons in Multilayer Graphene Moiré Superlattices.

Moiré pattern in twisted multilayers (tMLs) induces many emergent phenomena by subtle variation of atomic registry to modulate quasiparticles and their interactions, such as superconductivity, moiré excitons, and moiré phonons. The periodic superlattice potential introduced by moiré pattern also underlies patterned interlayer coupling at the interface of tMLs. Although this arising patterned interfacial coupling is much weaker than in-plane atomic interactions, it is crucial in moiré systems, as captured by the renormalized interlayer phonons in twisted bilayer transitional metal dichalcogenides. Here, we determine the quantitative relationship between the lattice dynamics of intralayer out-of-plane optical (ZO) phonons and patterned interfacial coupling in multilayer graphene moiré superlattices (MLG-MS) by the proposed perturbation model, which is previously challenging for MLGs due to their out-of-phase displacements of adjacent atoms in one atomic plane. We unveil that patterned interfacial coupling introduces profound modulations on Davydov components of nonfolded ZO phonon that are localized within the AB-stacked constituents, while the coupling results in layer-extended vibrations with symmetry of moiré pattern for moiré ZO phonons. Our work brings further degrees of freedom to engineer moiré physics according to the modulations imprinted on the phonon frequency and wavefunction.

Progress of superconducting nanofibers via electrospinning.

Superconducting nanofibers have attracted much attention in basic researches and practical applications due to their unique physical properties such as broad phase transition temperature, excellent heat conductivity, and high critical current density, etc. Electrospinning, as a common method to prepare nanofibers, also has many applications for the preparation of superconducting nanofibers. However, a few of the new methods to fabricate superconducting nanofibers via electrospinning still need further investigations. This review firstly introduces several potential electrospinning methods to obtain superconducting nanofibers, then proceeds to summarize the recent progress in the field of electrospun superconducting materials. The preparation process, difficulties and problems, physical properties of the superconducting nanofibers or nanonetworks (such as superconducting transition temperature, critical current density, critical magnetic field strength, fiber morphology, and structure, etc), theoretical analysis of the properties, and the techniques to improve the performance are also reviewed. In addition, some suggestions and prospects for the development and applications of electrospun superconducting materials in the future are discussed.

Effect of Fe, Co and Ni promoters on MoS2 based catalysts for chemoselective hydrogenation of nitroarenes.

The effect of Fe, Co and Ni promoters on supported MoS2 catalysts for hydrogenation of nitroarenes were systematically investigated via experiment, characterization and DFT calculation. It was found that the addition of promoters remarkably improved the reaction activity in a sequence of Ni > Co > Fe > Mo. Meanwhile Ni promoted catalyst with the best performance showed good recyclability and chemoselectivity for a wide substrate scope. The characterization results revealed that the addition of promoters decreased the interaction between Mo and support and facilitated the reductive sulfidation of Mo species to produce more coordinated unsaturated sites (CUS). DFT calculations showed that the addition of promoters increased the formation of CUS, and enhanced the adsorption of hydrogen. The influence degree of promoters followed the sequence Ni > Co > Fe > Mo, which was consistent with those of the activities. Nitrobenzene hydrogenation and hydrogen activation occurred at the S and Mo edge, respectively. The adsorbed hydrogen diffused from the Mo edge to the S edge to participate in the hydrogenation reaction. Mechanism investigation showed that the main reason for increased activity by the addition of promoters was the increase of amounts of CUS and the secondary reason was the augmentation of intrinsic activity of CUS. The present studies give a new understanding for promoter modified MoS2 catalysts applied for hydrogenation of nitroarenes.

Highly Conductive Graphene Paper with Vertically Aligned Reduced Graphene Oxide Sheets Fabricated by Improved Electrospray Deposition Technique.

Because of its notable electrical and mechanical properties, the highly conductive graphene paper has great potential applications in future flexible electronics. In this study, we report a simple and effective method to prepare vertically aligned graphene oxide papers from graphene oxide suspensions by an improved electrospray deposition technique with a moving stage, which is controlled by computer. Then, the flexible reduced graphene oxide papers are successfully synthesized after reduction by using hydroiodic acid. The obtained reduced graphene oxide paper has an electrical conductivity as high as 6180 S/m, which is more than one and a half times of the reduced graphene oxide paper film, which was fabricated by using the electrospray deposition technique without the moving stage. The experimental results approved for the first time that the degree of alignment of reduced graphene oxide sheets can affect the conductivity of the reduced graphene oxide papers. Further electrochemical measurements for a symmetrical supercapacitor device based on the prepared reduced graphene oxide paper indicate that it has great capacitive performance and electrochemical stability. It exhibited relatively high specific capacitance (174 F·g-1) at a current density of 1 A·g-1 in 6 M KOH aqueous solution, and its capacitance can retain approximately 86% after 1000 cycles. In addition, patterned freestanding reduced graphene oxide papers, which have potential applications in many fields such as stretchable electronics and wearable devices, also can be fabricated by using this method.

Genomic prediction in a nuclear population of layers using single-step models.

Single-step genomic prediction method has been proposed to improve the accuracy of genomic prediction by incorporating information of both genotyped and ungenotyped animals. The objective of this study is to compare the prediction performance of single-step model with a 2-step models and the pedigree-based models in a nuclear population of layers. A total of 1,344 chickens across 4 generations were genotyped by a 600 K SNP chip. Four traits were analyzed, i.e., body weight at 28 wk (BW28), egg weight at 28 wk (EW28), laying rate at 38 wk (LR38), and Haugh unit at 36 wk (HU36). In predicting offsprings, individuals from generation 1 to 3 were used as training data and females from generation 4 were used as validation set. The accuracies of predicted breeding values by pedigree BLUP (PBLUP), genomic BLUP (GBLUP), SSGBLUP and single-step blending (SSBlending) were compared for both genotyped and ungenotyped individuals. For genotyped females, GBLUP performed no better than PBLUP because of the small size of training data, while the 2 single-step models predicted more accurately than the PBLUP model. The average predictive ability of SSGBLUP and SSBlending were 16.0% and 10.8% higher than the PBLUP model across traits, respectively. Furthermore, the predictive abilities for ungenotyped individuals were also enhanced. The average improvements of prediction abilities were 5.9% and 1.5% for SSGBLUP and SSBlending model, respectively. It was concluded that single-step models, especially the SSGBLUP model, can yield more accurate prediction of genetic merits and are preferable for practical implementation of genomic selection in layers.

A highly stretchable humidity sensor based on spandex covered yarns and nanostructured polyaniline.

Stretchable sensors, as the important components of flexible electronic devices, have achieved progress in a variety of applications for monitoring physical or environmental conditions, such as sound, temperature, vibration, and pressure. However, it still remains a challenge to fabricate high performance stretchable humidity sensors. Herein, we present a novel stretchable humidity sensor, which was fabricated based on an ultrastretchable polyaniline composite fiber. Because of the composite fiber with a "twining spring" configuration (cotton fibers twining spirally around a polyurethane fiber) it maintains a stable electrical conductivity up to a strain of 200%. In addition, the conductivity of the composite fiber remains perfectly stable after 5000 cyclic stretching events of 200% strain. Incorporating the humidity sensitive properties of nanostructured polyaniline, the stretchable humidity sensor based on the composite fiber effectively maintains its humidity sensitivity at different elongations.

Body composition, serum lipid levels, and transcriptomic characterization in the adipose tissue of male pigs in response to sex hormone deficiency.

It is known that the male hypogonadism plays an important role in regulating adipose metabolism. In the present study, fifteen pairs of full male sibs were divided into a castrated group and an intact group with a paired experiment design. The pigs were slaughtered at an age of 175days. The carcass characteristics and fat deposit of the studied animal were measured, and the hormone and serum lipid levels of the peripheral blood samples were determined, and the differentially expressed genes of the back fat between the two groups were screened with porcine genome array. Our results showed that the absence of male gonadal steroids attributed to castration significantly raised the serum lipid levels and increased fat accumulation in the pigs. A total of 225 differentially expressed genes were identified between the boars and barrows and 135 of them were upregulated. The analysis of Gene Ontology categories and KEGG pathway indicated that these differentially expressed genes were mainly involved in metabolism of lipid, carbohydrate, amino acid, xenobiotics biodegradation, and immune diseases pathways. Our results indicated that there were higher capacity of fatty acid of synthesis, enhanced uptaking capacity of fatty acids and cholesterol, inhibited lipolysis, and enhanced carbohydrate metabolism in the adipose tissue of barrows compared to boars. The findings of the present study provide new insight into the mechanisms of adipose metabolism induced by hormone deficiency.

Integrative transcriptomics and proteomics analysis of longissimus dorsi muscles of Canadian double-muscled Large White pigs.

Canadian double-muscled Large White pigs are characterized by notable muscle mass, showing high daily gain and lean rate and good meat quality. In order to identify the major genes or proteins involved in muscle hyperplasia and hypertrophy, three pairs of full-sib pigs with extreme muscle mass difference from Canadian Large White were selected as experimental animals at 3 months age. The phenotypic differences of longissimus dorsi muscles (LD) were investigated with microarray and proteomics (2-DE, MALDI-TOF-MS), and results were verified by real-time PCR and western bolting respectively. The gene expressing profiling identified 57 and 260 and 147 differently expressed genes (DEGs) from the three pairs respectively with Bayesian statistics and significant analysis of microarrays (SAM) (p<0.05, q<0.05, fold>2). From the network of these DEGs, some major genes were displayed, such as EGF, PPARG, FN1, SERPINE1, MYC, JUN, involved in Wnt, MAPK and TGF-ß signal pathway respectively, which mainly participated in cell differentiation and proliferation. In parallel, proteomics analyses revealed 50 differently expressed protein (DEP) spots with mass spectrum, and 33 spots of them were found annotated, which took part in energy metabolism and the structure and contraction of muscle fiber. In brief, our integrated study provides a good foundation for the further study on the genetic mechanism of the double muscle traits in pigs.

Patterned, highly stretchable and conductive nanofibrous PANI/PVDF strain sensors based on electrospinning and in situ polymerization.

A facile fabrication strategy via electrospinning and followed by in situ polymerization to fabricate a patterned, highly stretchable, and conductive polyaniline/poly(vinylidene fluoride) (PANI/PVDF) nanofibrous membrane is reported. Owing to the patterned structure, the nanofibrous PANI/PVDF strain sensor can detect a strain up to 110%, for comparison, which is 2.6 times higher than the common nonwoven PANI/PVDF mat and much larger than the previously reported values (usually less than 15%). Meanwhile, the conductivity of the patterned strain sensor shows a linear response to the applied strain in a wide range from 0% to about 85%. Additionally, the patterned PANI/PVDF strain sensor can completely recover to its original electrical and mechanical values within a strain range of more than 22%, and exhibits good durability over 10,000 folding-unfolding tests. Furthermore, the strain sensor also can be used to detect finger motion. The results demonstrate promising application of the patterned nanofibrous membrane in flexible electronic fields.

Electrical transport properties of an isolated CdS microrope composed of twisted nanowires.

CdS is one of the important II-VI group semiconductors. In this paper, the electrical transport behavior of an individual CdS microrope composed of twisted nanowires is studied. It is found that the current-voltage (I-V) characteristics show two distinct power law regions from 360 down to 60 K. Space-charge-limited current (SCLC) theory is used to explain these temperature- and electric-field-dependent I-V curves. The I-V data can be well fitted by this theory above 100 K, and the corresponding carrier mobility, trap energy, and trap concentration are also obtained. However, the I-V data exhibit some features of the Coulomb blockade effect below 80 K.

Layer number identification of intrinsic and defective multilayered graphenes up to 100 layers by the Raman mode intensity from substrates.

An SiO2/Si substrate has been widely used to support two-dimensional (2d) flakes grown by chemical vapor deposition or prepared by micromechanical cleavage. The Raman intensity of the vibration modes of 2d flakes is used to identify the layer number of 2d flakes on the SiO2/Si substrate, however, such an intensity is usually dependent on the flake quality, crystal orientation and laser polarization. Here, we used graphene flakes, a prototype system, to demonstrate how to use the intensity ratio between the Si peak from SiO2/Si substrates underneath graphene flakes and that from bare SiO2/Si substrates for the layer-number identification of graphene flakes up to 100 layers. This technique is robust, fast and nondestructive against sample orientation, laser excitation and the presence of defects in the graphene layers. The effect of relevant experimental parameters on the layer-number identification was discussed in detail, such as the thickness of the SiO2 layer, laser excitation wavelength and numerical aperture of the used objective. This paves the way to use Raman signals from dielectric substrates for layer-number identification of ultrathin flakes of various 2d materials.

A battery-operated portable handheld electrospinning apparatus.

Electrospinning (e-spinning) still has certain limitations in flexible practicability because its conventional setup is usually quite bulky and excessively dependent on a plug (electric supply). In this article, we report on a battery-operated e-spinning apparatus (BOEA) based on miniaturization and integration. The new device gets liberated from the conventional heavy power supply, achieves the tight integration of functional parts and can be operated by a single hand due to its small volume (10.5 × 5 × 3 cm(3)) and light weight (about 120 g). Different polymers such as polyvinylpyrrolidone (PVP), polycaprolactone (PCL), polystyrene (PS), poly(lactic acid) (PLA) and poly(vinylidene fluoride) (PVDF) were electrospun into fibers successfully, which confirms the stable performance and good real-time control capability of the apparatus. These results demonstrate that the BOEA could be potentially applied in many fields, especially in biomedical fields such as skin damage, wound healing, rapid hemostasis, etc.

Self-powered electrospinning apparatus based on a hand-operated Wimshurst generator.

A conventional electrospinning setup cannot work without a plug (electricity supply). In this article, we report a self-powered electrospinning setup based on a hand-operated Wimshurst generator. The new device has better applicability and portability than a typical conventional electrospinning setup because it is lightweight and can work without an external power supply. Experimental parameters of the apparatus such as the minimum number of handle turns to generate enough energy to spin, rotation speed of the handle and electrospinning distance were investigated. Different polymers such as polystyrene (PS), poly(vinylidene fluoride) (PVDF), polycaprolactone (PCL) and polylactic acid (PLA) were electrospun into ultrathin fibers successfully by this apparatus. The stability, reliability, and repeatability of the new apparatus demonstrate that it can be used as not only a demonstrator for an electrospinning process, but also a beneficial complement to conventional electrospinning especially where or when without a power supply, and may be used in wound healing and rapid hemostasis, etc.