A field and modeling study of fractured rock permeability reduction using microbially induced calcite precipitation.

Microbially induced calcite precipitation (MICP) offers an attractive alternative to traditional grouting technologies for creating barriers to groundwater flow and containing subsurface contamination, but has only thus far been successfully demonstrated at the laboratory scale and predominantly in porous media. We present results of the first field experiments applying MICP to reduce fractured rock permeability in the subsurface. Initially, the ureolytic bacterium, Sporosarcina pasteurii, was fixed in the fractured rock. Subsequent injection of cementing fluid comprising calcium chloride and urea resulted in precipitation of large quantities (approximately 750 g) of calcite; significant reduction in the transmissivity of a single fracture over an area of several m(2) was achieved in around 17 h of treatment. A novel numerical model is also presented which simulates the field data well by coupling flow and bacterial and solute reactive transport processes including feedback due to aperture reduction via calcite precipitation. The results show that MICP can be successfully manipulated under field conditions to reduce the permeability of fractured rock and suggest that an MICP-based technique, informed by numerical models, may form the basis of viable solutions to aid pollution mitigation.

A new incorporation mechanism for trivalent actinides into bioapatite: a TRLFS and EXAFS study.

One of the most toxic byproducts of nuclear power and weapons production is the transuranics, which have a high radiotoxicity and long biological half-life due to their tendency to accumulate in the skeletal system. This accumulation is inhomogeneous and has been associated with the chemical properties and structure of the bone material rather than its location or function. This suggests a chemical driving force to incorporation and requires an atomic scale mechanistic understanding of the incorporation process. Here we propose a new incorporation mechanism for trivalent actinides and lanthanides into synthetic and biologically produced hydroxyapatite. Time-resolved laser fluorescence spectroscopy and extended X-ray absorption fine structure have been used to demonstrate that trivalent actinides and lanthanides incorporate into the amorphous grain boundaries of apatite. This incorporation site can be used to explain patterns in uptake and distribution of radionuclides in the mammalian skeletal system.

Nano-crystalline hydroxyapatite bio-mineral for the treatment of strontium from aqueous solutions.

Hydroxyapatites were analysed using electron microscopy, X-ray diffraction (XRD) and X-ray fluorescence (XRF) analysis. Examination of a bacterially produced hydroxyapatite (Bio-HA) by scanning electron microscopy showed agglomerated nano-sized particles; XRD analysis confirmed that the Bio-HA was hydroxyapatite, with an organic matter content of 7.6%; XRF analysis gave a Ca/P ratio of 1.55, also indicative of HA. The size of the Bio-HA crystals was calculated as ~25 nm from XRD data using the Scherrer equation, whereas Comm-HA powder size was measured as ≤ 50 µm. The nano-crystalline Bio-HA was ~7 times more efficient in removing Sr(2+) from synthetic groundwater than Comm-HA. Dissolution of HA as indicated by the release of phosphate into the solution phase was higher in the Comm-HA than the Bio-HA, indicating a more stable biomaterial which has a potential for the remediation of contaminated sites.

Influence of pH, competing ions, and salinity on the sorption of strontium and cobalt onto biogenic hydroxyapatite.

Anthropogenic radionuclides contaminate a range of environments as a result of nuclear activities, for example, leakage from waste storage tanks/ponds (e.g. Hanford, USA or Sellafield sites, UK) or as a result of large scale nuclear accidents (e.g. Chernobyl, Ukraine or Fukushima, Japan). One of the most widely applied remediation techniques for contaminated waters is the use of sorbent materials (e.g. zeolites and apatites). However, a key problem at nuclear contaminated sites is the remediation of radionuclides from complex chemical environments. In this study, biogenic hydroxyapatite (BHAP) produced by Serratia sp. bacteria was investigated for its potential to remediate surrogate radionuclides (Sr(2+) and Co(2+)) from environmentally relevant waters by varying pH, salinity and the type and concentration of cations present. The sorption capacity of the BHAP for both Sr(2+) and Co(2+) was higher than for a synthetically produced hydroxyapatite (HAP) in the solutions tested. BHAP also compared favorably against a natural zeolite (as used in industrial decontamination) for Sr(2+) and Co(2+) uptake from saline waters. Results confirm that hydroxyapatite minerals of high surface area and amorphous calcium phosphate content, typical for biogenic sources, are suitable restoration or reactive barrier materials for the remediation of complex contaminated environments or wastewaters.

A review of the environmental corrosion, fate and bioavailability of munitions grade depleted uranium.

Depleted uranium (DU) is a by-product of nuclear fuel enrichment and is used in antitank penetrators due to its high density, self-sharpening, and pyrophoric properties. Military activities have left a legacy of DU waste in terrestrial and marine environments, and there have been only limited attempts to clean up affected environments. Ten years ago, very little information was available on the dispersion of DU as penetrators hit their targets or the fate of DU penetrators left behind in environmental systems. However, the marked increase in research since then has improved our knowledge of the environmental impact of firing DU and the factors that control the corrosion of DU and its subsequent migration through the environment. In this paper, the literature is reviewed and consolidated to provide a detailed overview of the current understanding of the environmental behaviour of DU and to highlight areas that need further consideration.

Corrosion and transport of depleted uranium in sand-rich environments.

The firing of depleted uranium (DU) weapons during conflicts and military testing has resulted in the deposition of DU in a variety of sand-rich environments. In this study, DU-amended dune sand microcosm and column experiments were carried out to investigate the corrosion of DU and the transport of corrosion products. Under field-moist conditions, DU corroded to metaschoepite ((UO(2))(8)O(2)(OH)(12).(H(2)O)(10)) at a rate of 0.10+/-0.012 g cm(-2)y(-1). This loosely bound corrosion product detached easily from the coupon and became distributed heterogeneously within the sand. The corrosion of DU caused significant changes in the geochemical environment, with NO(3)(-) and Fe(III) reduction observed. Column experiments showed that transport of metaschoepite was mainly dependent on its dissolution and the subsequent interaction of the resulting dissolved uranyl (UO(2)(2+)) species with sand particles. The modelling results predict that the transport of U released from metaschoepite dissolution is retarded, due to a slowly desorbing surface species (first order desorption rate constant=5.0 (+/-1.0)x10(-8)s(-1)). The concentrations of U eluting from the metaschoepite column were orders of magnitude higher than the World Health Organisation's recommended maximum admissible concentration for U in drinking water of 15 microg L(-1). Therefore, a relatively high level of mobile U contamination would be expected in the immediate proximity of a corroding penetrator in a sand-rich environment.

Corrosion and fate of depleted uranium penetrators under progressively anaerobic conditions in estuarine sediment.

The testing of armor-piercing depleted uranium (DU) "penetrators" has resulted in the deposition of DU in the sediments of the Solway Firth, UK. In this study, DU-amended, microcosm experiments simulating Solway Firth sediments under high (31.5) and medium (16.5) salinity conditions were used to investigate the effect of salinity and biogeochemical conditions on the corrosion and fate of DU, and the impact of the corroding DU on the microbial population. Under suboxic conditions, the average corrosion rates were the same forthe 31.5 and 16.5 salinity systems at 0.056 +/- 0.006 g cm(-2) y(-1), implying that complete corrosion of a 120 mm penetrator would take approximately 540 years. Under sulfate-reducing conditions, corrosion ceased due to passivation of the surface. Corroding DU resulted in more reducing conditions and decreased microbial diversity as indicated by DNA sequencing and phylogenetic analysis. The lack of colloidal and particulate DU corrosion products, along with measurable dissolved U and a homogeneous association of U with the sediment, suggest that U was transported from the penetrator surface into the surrounding environment through dissolution of U(VI), with subsequent interactions resulting in the formation of secondary uranium species in the sediment.

Biogeochemical controls on the corrosion of depleted uranium alloy in subsurface soils.

Military activities have left a legacy of depleted uranium (DU) penetrator waste in the near-surface terrestrial environment. To understand the fate of this DU alloy, the mechanisms and controlling factors of corrosion need to be determined. In this study, field-moist and waterlogged microcosms were used to investigate the effect of redox conditions and soil water content on the corrosion and fate of DU in subsurface soil, and the impact of corroding DU on the soil microbial population. The mechanism of corrosion and the corrosion products formed were highly dependent on the water status of the soil. Under field-moist conditions, DU corroded at a rate of 0.49 +/- 0.06 g cm(-2) y(-1) and the main U input to surrounding soil was large metaschoepite [(UO2)8O2(OH)12 x (H2O)10] particles. However, underwaterlogged conditions the rate of corrosion was significantly slower at 0.01-0.02 g cm(-2) y(-1) and occurred with the release of dissolved species to the surrounding environment. Corrosion ceases under reducing conditions, thus redox conditions are important in determining the persistence of penetrators in the environment. Corroding DU alters the redox conditions in the surrounding environment and both mechanisms of corrosion impact the microbial community.