[Limb salvage or amputation after severe trauma to the lower extremities : Evidence from the LEAP Study]. / Gliedmaßenerhalt oder Amputation nach schwerem Trauma der unteren Extremität : Evidenz aus der LEAP-Studie.

Deciding between reconstruction and primary amputation after severe high-energy trauma to the lower extremities is difficult and consequential. The Lower Extremity Assessment Project (LEAP) prospectively included and investigated patients with severe, limb-threatening injuries below the femur, with third-grade open fractures, defined soft-tissue damage and amputation wounds. This paper aims to review the key results of the LEAP study, which were published in several parts, in due consideration of the newer relevant literature, and to deduce the consequences for clinical practice. The main results are as follows: No score is sufficiently reliable to predict the success of reconstruction. Loss of muscle seems to be more momentous than loss of bone. Any accompanying injuries that should be taken into account in the individual treatment concepts are crucial to the results, in addition to comorbidities and other individual patient-related factors, such as alcoholism, smoking, insurance, and social background. Psychological impairment is frequent after these injuries and should therefore be addressed regularly with regard to rehabilitation.

Effect of intraoperative weight-bearing simulation on the mechanical axis in total knee arthroplasty.

PURPOSE: Successful outcome after total knee arthroplasty (TKA) requires precise realignment of the mechanical axis. The intraoperative assessment of the mechanical axis is difficult. Intraoperatively, the effect of weight bearing on the lower limb mechanical axis is ignored. We developed a custom-made mechanical loading device to simulate weight-bearing conditions intraoperatively and analysed its effect on the mechanical axis during TKA. METHODS: Measurements of the mechanical axis were obtained during 30 consecutive primary TKAs in osteoarthritic patients using image-free knee navigation system. Half body weight was applied intraoperatively using our device to quantify the effect of intraoperative load application on the mechanical axis, thus receiving indirect information about soft tissue balancing. Furthermore, the intraobserver and interobserver reliability of navigated mechanical axis measurement with and without load was determined. RESULTS: Before TKA, mean mechanical axis was 4.0° ± 4.9° without load. Under loading conditions, the mean change of the mechanical axis was 2.1° ± 2.8°. Repetitive measurements of the senior surgeon and junior surgeon revealed a high intraobserver (ICC 0.997) and interobserver reliability (ICC 0.998). The registration of the mechanical axis without and with application of intraoperative loading demonstrated no significant differences during insertion of the trial components (SD 0.29 ± 0.29) and after the definitive component cementation (SD 0.63 ± 0.44). CONCLUSIONS: Intraoperative quantification and analysis of the mechanical lower limb axis applying defined axial loading by our custom-made loading apparatus is reliable. Ligament stability was unbalanced before TKA and balanced after TKA. For TKA, intraoperative simulation of weight bearing may be helpful to quantify, control and correct knee stability and its influence of mechanical axis.

[Knee arthroplasty in patients with posttraumatic arthritis]. / Knieendoprothetik bei posttraumatischer Arthrose.

Arthroplasty in patients with posttraumatic arthritis can be challenging due to joint instability, malalignment, osseous defects, non-union, contracture, scarring, low-grade infections and pathologies of the patellofemoral joint. Detailed preoperative planning is recommended concerning incisions, soft tissue management, osseous reconstruction, hardware removal, potential infections and type of prosthesis (e.g. type of constraint, stems and augments). Severe difficulties can occur with exposure of the knee with respect to the extensor mechanism so that quadriceps snip or osteotomy of the tibial tuberosity may be necessary. Postoperative functional results are inferior to arthroplasty for atraumatic gonarthritis. Patients are at increased risk for intraoperative and postoperative complications (e.g. infections, instability, loosening and patellofemoral problems). Reconstructive alternatives (e.g. osteotomy, ligament reconstruction and cartilage repair) should always be considered especially in younger patients; however, most patients show a significant improvement in function and relief of pain after arthroplasty for posttraumatic gonarthritis.

[Biodegradable screw versus a press-fit bone plug fixation for ACL reconstruction: a prospective randomized study]. / Biodegradierbare Schraube vs. einer Press-fit-Verankerung für VKB-Rekonstruktionen : Eine prospektive randomisierte Studie.

BACKGROUND: Press-fit fixation of a tendon graft has been advocated in order to achieve tendon to bone healing. HYPOTHESIS: Fixation of a tendon graft with a porous bone scaffold limits bone tunnel enlargement compared with a biodegradable interference screw fixation. METHODS: Between 2005 and 2006, 20 patients (17 men, 3 women) were enrolled in this study for primary reconstruction of the ACL. Patients were randomized to either obtain graft fixation in the tibial tunnel by means of an interference screw (I) or a press-fit fixation with a porous bone cylinder (P). Three months after surgery, a CT scan of the knee was performed and tunnel enlargement was analysed in the coronal and sagittal planes for the proximal, middle and distal thirds of the tunnel. After 6 months, 1 and 2 years, International Knee Documentation Committee (IKDC), Tegner and Lysholm scores of both groups were compared. RESULTS: The bone tunnel enlargement was 106.9±10.9% for group P and 121.9±9.0% for group I (P<0.02) in the AP plane and 102.8±15.2% vs 121.5±10.1% in the coronal plane (P<0.01). IKDC, Tegner, and Lysholm scores improved in both groups from pre- to postoperative assessment without significant differences between the two groups. There was a trend to higher knee stability in group P after 3 months (0.6±1.4 mm vs 1.81±.5 mm, P=0.08). CONCLUSIONS: Both interference screw and a press-fit fixation lead to a high number of good or very good outcomes after ACL reconstruction. Tibial press-fit fixation decreases the amount of proximal bone tunnel enlargement. Press-fit fixation decreases the amount of proximal bone tunnel enlargement and improves bone to tendon contact.

Biomechanical characterization of double-bundle femoral press-fit fixation techniques.

PURPOSE: Press-fit fixation of patellar tendon bone anterior cruciate ligament autografts is an interesting technique because no hardware is necessary. To date, no biomechanical data exist describing an implant-free double-bundle press-fit procedure. The purpose of this study was to characterize the biomechanical properties of three double-bundle press-fit fixations. METHODS: In a controlled laboratory study, the patellar-, quadriceps- and hamstring tendons of 10 human cadavers (age: 49.2 ± 18.5 years) were used. An inside out press-fit fixation with a knot in the semitendinosus and gracilis tendons (SG) combined with an additional bone block, with two quadriceps tendon bone block grafts (QU) was compared with press-fit fixation of two bone patellar tendon bone block (PT) grafts in 30 porcine femora. Constructs were cyclically stretched and then loaded until failure. Maximum load to failure, stiffness and elongation during failure testing and cyclical loading were investigated. RESULTS: The maximum load to failure was 703 ± 136 N for SG fixation, 632 ± 130 N for QU and 656 ± 127 N for PT fixation. Stiffness of the constructs averaged 138 ± 26 N/mm for SG, 159 ± 74 N/mm for QU, and 154 ± 50 N/mm for PT fixation. Elongation during initial cyclical loading was 1.2 ± 1.4 mm for SG, 2.0 ± 1.4 mm for QU, and 1.0 ± 0.6 mm for PT (significantly larger for PT and QU between the first 5 cycles compared with cycles 15-20th, P < 0.01). CONCLUSION: All investigated double-bundle fixation techniques were equal in terms of maximum load to failure, stiffness, and elongation. Unlike with single-bundle press-fit fixation techniques that have been published, no difference was observed between pure tendon combined with an additional bone block and tendon bone grafts. All techniques exhibited larger elongation during initial cyclical loading. All three press-fit fixation techniques that were investigated exhibit comparable biomechanical properties. Preconditioning of the constructs is critical.

[Reconstruction of an iatrogenic acromial pseudarthrosis: a case report]. / Rekonstruktion einer iatrogenen Akromionpseudarthrose: Ein Fallbericht.

Acromial fractures are rare but severe complications which can occur during subacromial decompression. We report a case of acromial pseudarthrosis which was discovered belatedly due to persistent pain after several operations. The pseudarthrosis was successfully treated by osteosynthesis with a distal radius plate and implantation of a monocortical bone graft from the iliac crest. Two years after surgery, the fracture has healed and the patient's pain improved significantly. In the constant score the patient achieved postoperatively 58 points compared to 25 points before surgery and 65 points compared to 25 points preoperatively in the subjective shoulder rating system (SSRS). Postoperatively, the patient had a better range of motion with active abduction/adduction of 50/0/25º (30/0/20° preoperatively), outward rotation/inward rotation of 35/0/45º (30/0/30° preoperatively) and anteversion/retroversion of 60/0/35° (35/0/20° preoperatively).

Imaging the in-plane magnetization in a Co microstructure by Fourier transform holography.

We report on experiments using Fourier transform holography to image the in-plane magnetization of a magnetic microstructure. Magnetic sensitivity is achieved via the x-ray magnetic circular dichroism effect by recording holograms in transmission at off-normal incidence. The reference beam is defined by a narrow hole milled at an inclined angle into the opaque mask. We present magnetic domain images of an in-plane magnetized cobalt element with a size of 2 µm × 2 µm× 20 nm. The domain pattern shows a multi-vortex state that deviates from the simple Landau ground state.

Accuracy of high tibial osteotomy: comparison between open- and closed-wedge technique.

High tibial osteotomy is an established technique for the treatment of varus malaligned knees. This study analyses the difference between the amount of correction in the preoperative planning and the postoperative result. Furthermore, it compares the difference of the accuracy between open-wedge osteotomy and closed-wedge osteotomy. About 61 patients were either treated with open-wedge or closed-wedge high tibial osteotomy. Preoperative planning and postoperative analysis were performed with a special planning software. The influence of operative technique, aetiology, age, number of previous surgeries, amount of correction and accuracy of the correction compared to the preoperative planning were analysed. The overall postoperative mechanical axis differed form preoperative planning by 2.1° ± 1.7°. The accuracy in the open-wedge group (1.7° ± 1.6°) was significantly higher than in the closed-wedge group (2.6° ± 1.8°; P = 0.038). In patients with congenital varus deformity, the accuracy of the correction was significantly higher than in patients with post-traumatic deformity. The authors recommend open-wedge technique in combination with fixed-angle plates for high tibial osteotomy.

Long-term outcome after joint reconstruction or medial resection arthroplasty for anterior SCJ instability.

INTRODUCTION: In the present study, the long-term results of 11 patients with anterior sternoclavicular joint (SCJ) instability are reported. All included patients had an anterior SCJ instability and due to delayed diagnosis, operative treatment was not done immediately. METHOD: The patients had a mean age of 29.2 years (range 16-63 years). One patient sustained concomitant injuries. Six patients had resection arthroplasty. Five patients had reconstruction of the SCJ with transosseous tension band PDS fixation or ligament reconstruction with additional wire cerclage. The results of treatment were evaluated after a mean follow-up period of 9.9 years (range 1-27 years) using the ASES, DASH and power-, age and gender adjusted Constant-Murley Score. RESULTS: In general, the mean values of the different scores (ASES 79.8; DASH 11.8; Constant-Murley 81%) demonstrated good outcome. The outcome evaluation of the patients who had SCJ reconstruction did not differ significantly from the patients who had medial resection arthroplasty. The rate of postoperative pain or instability was low using visual analog scale and did not differ significantly between the groups. The outcome results of the reconstruction group were equal to the results of the resection group when SCJ-reconstruction was performed soon after SCJ injury. One patient in the resection group (6 patients) demonstrated poor results due to continued instability of the remaining clavicle. CONCLUSION: We concluded that patient selection and a specific clinical indication for operative treatment are crucial. Resection of the medial clavicle results in good functional outcome when the costoclavicular ligament is preserved or reconstructed.

[Biomechanical analysis of press-fit fixation of anterior cruciate ligament transplants]. / Biomechanische Analyse der Press-fit-Fixierung von Kreuzbandtransplantaten.

Press-fit fixation of anterior cruciate ligament autografts is an interesting technique because no hardware is necessary. A total of 168 cadaveric human patellar, quadriceps and hamstring tendons (average age 49.2 +/- 18.5 years) were used and 15 different fixation methods were tested. Constructs were cyclically stretched and then loaded until failure. Maximum load to failure, stiffness and elongation during failure testing and cyclical loading were compared. Some techniques showed comparable biomechanical qualities to interference screw fixation. All investigated double bundle fixation techniques were equal in terms of maximum load to failure, stiffness and elongation. All techniques exhibited greater elongation during initial cyclical loading. Some of the press-fit fixation techniques investigated exhibited comparable biomechanical properties and preconditioning of the constructs is critical. Press-fit fixation enhances tendon to bone contact at the entry of the bone tunnel to the joint.

Magnetic ground state of single and coupled permalloy rectangles.

We have studied the magnetic domain structure in Permalloy rectangles that reveal flux-closure domain configurations. Arrays with varying spacing between the rectangles are investigated by scanning electron microscopy with polarization analysis as well as by micromagnetic simulation. In contrast to general expectation, rectangles in the flux-closure Landau state show significant coupling and form a magnetic pattern of common chirality. The coupling is due to the stray field that originates from small changes of the magnetization alignment, which is sensitive to the exact shape and the separation of the rectangles.

The role of preoperative MRI in knee arthroscopy: a retrospective analysis of 2,000 patients.

The aim of this study was to investigate, to what extent routine preoperative MRI scans could set the indications for knee arthroscopies and reduce the number of diagnostic arthroscopies. For this retrospective cohort study, 1,000 patients who had knee arthroscopies documented in 1994/1995 were compared with 1,000 patients that were treated in 2004/2005. The preoperative diagnoses that gave indications for knee arthroscopy were compared with the intraoperative findings. The congruence of preoperative diagnosis with the intraoperative findings was evaluated comparing both study populations. The number of patients who were referred to orthopaedic trauma surgeons with MRI increased from 24% to 56%. A high congruence of preoperative diagnosis and intraoperative findings was found in 49% in 1994/1995 and 55% in 2004/2005. However, regarding the most important outcome parameter, the number of diagnostic arthroscopies, no improvement was found (3% in both periods). The presented data suggests that MRI scans are not routinely necessary as an indication for knee arthroscopy, as clinical examination and plain radiograph are sufficient. However, MRI scans do allow a more detailed characterization of the expected findings and can therefore be helpful in therapy planning.

Graft remodeling during growth following anterior cruciate ligament reconstruction in skeletally immature sheep.

INTRODUCTION: Ruptures of the anterior cruciate ligament are being diagnosed with increasing frequency in skeletally immature individuals. It was our aim to investigate the graft remodelling process following an autologous, transphyseal reconstruction of the anterior cruciate ligament (ACL) in skeletally immature sheep. We hypothesized that the ligamentisation process in immature sheep is quicker and more complete when compared to adult sheep. MATERIALS AND METHODS: Skeletally immature sheep with an age of 4 months underwent a fully transphyseal ACL reconstruction using an autologous tendon. The animals were subsequently sacrificed at 3, 6, 12 and 24 weeks following surgery. Each group was characterised histomorphometrically, by immunostaining (VEGF, SMA), by transmission electron microscopy (TEM) and biomechanically (UFS Roboter). RESULTS: The histomorphometric analysis and presence of VEGF and SMA positive cells demonstrated a rapid return to a ligament like structure. The biomechanical analysis revealed an anteroposterior translation that was still increased even 6 months following surgery. CONCLUSION: As in adult sheep models, the remodeling of a soft tissue graft used for ACL reconstruction results in a biomechanically inferior substitute. However, the immature tissue seems to remodel faster and more complete when compared to adults.

Influence of perfusion and cyclic compression on proliferation and differentiation of bone marrow stromal cells in 3-dimensional culture.

Until now, there has been no in vitro model that duplicates the environment of bone marrow. The purpose of this study was to analyze proliferation and differentiation of human bone marrow stromal cells (hBMSC) under the influence of continuous perfusion and cyclic mechanical loading. hBMSC of seven individuals were harvested, grown in vitro, and combined. 10(6) hBMSC were seeded on a bovine spongiosa disc and incubated in a bioreactor system. Cell culture was continued using three different conditions: Continuous perfusion (group A), 10% cyclic compression at 0.5Hz (group B) and static controls (group C). After 24h, 1, 2, and 3 weeks, we determined cell proliferation (MTS-assay) and osteogenic differentiation (osteocalcin ELISA, Runx2 mRNA). Tenascin-C mRNA was quantified to exclude fibroblastic differentiation. In groups A and B, proliferation was enhanced after 2 weeks (48.6+/-19.6x10(3) (A) and 44.6+/-14.3 x 10(3) cells (B)) and after 3 weeks (46.6+/-15.1 x 10(3) (A) and 44.8+/-10.2 x 10(3) cells (B)) compared with controls (26.3+/-10.8 x 10(3) (2 weeks) and 17.1+/-6.5 x 10(3) cells (3 weeks), p<0.03). Runx2 mRNA was upregulated in both stimulated groups after 1, 2, and 3 weeks compared to control (group A, 1 week: 5.2+/-0.7-fold; p<0.01, 2 weeks: 4.4+/-1.9-fold; p<0.01, 3 weeks: 3.8+/-1.7-fold; p=0.013; group B, 1 week: 3.6+/-1.1-fold, p<0.01, 2 weeks: 4.2+/-2.2-fold, p<0.01; 3 weeks: 5.3+/-2.7-fold, p<0.01). hBMSC stimulated by cyclic compression expressed the highest amount of osteocalcin at all time points (1 week: 294.5+/-88.4 mg/g protein, 2 weeks: 294.4+/-73.3mg/g protein, 3 weeks: 293.1+/-83.6 mg/g protein, p0.03). The main stimulus for cell proliferation in a 3-dimensional culture of hBMSC is continuous perfusion whereas mechanical stimulation fosters osteogenic commitment of hBMSC. This study thereby contributes to the understanding of physical stimuli that influence hBMSC in a 3-dimensional cell culture system.

[Total knee replacement in a below-knee amputee. Technical reference points and possible solutions]. / Knieendoprothetik beim Unterschenkelamputierten. Technische Besonderheiten der Referenzierung und Lösungsoptionen.

We present the case of a 62-year-old man with posttraumatic osteoarthritis after a tibial head fracture. A below-knee amputation of the same limb had been performed years ago because of a chronic diabetic foot ulcus. The patient underwent total knee replacement, and the 2-year postoperative clinical outcome was very good. The problem of how to address missing anatomic reference points for the implantation of the tibial component in below-knee amputees and the question whether navigation offers a potential benefit in this situation are discussed.

Computer-assisted analysis of lower limb geometry: higher intraobserver reliability compared to conventional method.

Exact radiographic evaluation of lower limb alignment, joint orientation and leg length is crucial for preoperative planning and successful treatment of deformities, fractures and osteoarthritis. Improvement of the accuracy of radiographic measurements is highly desirable. To determine the intraobserver reliability of conventional analysis of lower extremity geometry, 59 long leg radiographs were randomly analyzed 5 times by a single surgeon. The measurements revealed a standard deviation between 0.36 degrees and 1.17 degrees for the angles mLPFA, mLDFA, MPTA, LDTA, JLCA and AMA (nomenclature according to Paley), and 0.94 mm and 0.90 mm for the MAD and leg length, respectively. Computer-assisted analysis with a special software significantly reduced the standard deviation of the mLDFA, MPTA, LDTA, JLCA (each p < 0.001), AMA (p = 0.032) and MAD (p = 0.023) by 0.05-0.36 degrees and 0.14 mm, respectively. Measuring time was reduced by 44% to 6:34 +/- 0:45 min (p < 0.001). Digital calibration by the software revealed an average magnification of conventional long leg radiographs of 4.6 +/- 1.8% (range: 2.7-11.9%). Computer-assisted analysis increases the intraobserver reliability and reduces the time needed for the analysis. Another major benefit is the ease of storage and transfer of digitized images. Due to the varying magnification factors on long leg radiographs, the use of magnification markers for calibration is recommended.

[Indication for removal of tibial nails]. / Indikation zur Entfernung von Tibiamarknägeln.

BACKGROUND: Tibial nail removal has been suggested as a routine procedure for both symptomatic and asymptomatic patients. The aim of this study was to define guidelines for the removal of tibial nails. PATIENTS AND METHODS: A retrospective study on the isolated removal of 69 tibial nails after fracture consolidation was done. A review of the patient charts and radiographs was performed. Forty-four patients (64%) were available for the follow-up interview. RESULTS: Preoperatively, 26 patients (59%) had local complaints. Of these 26 patients, 73% reported an improvement, and 8% reported an aggravation of their local complaints. Of the 18 patients who were asymptomatic before surgery, 17% reported long-term complaints at follow-up. CONCLUSION: We conclude that routine removal of tibial nails should be discussed critically in asymptomatic patients.

Effects of cyclic longitudinal mechanical strain and dexamethasone on osteogenic differentiation of human bone marrow stromal cells.

The aim of the study was to investigate the effect of cyclic mechanical strain on differentiation markers in the presence or absence of dexamethasone. Human bone marrow stromal cells (BMSC) from seven donors (32.5+/-6.2 years) were cultivated with (D+) or without (D-) dexamethasone. A cyclic mechanical strain with an elongation of 2% (D+2; D-2) or 8% (D+8; D-8) was applied for three days with a stimulation time of three times two hours each day. Levels of alkaline phosphatase (ALP) and osteocalcin (OC) were compared after time intervals of four and seven days. mRNA expression of Collagen I, III and Cbfa1 was investigated after one, four, and seven days. ALP levels were significantly increased in the D+8 group after four and seven days (147.1+/-6.3%; p<0.05 and 168.6+/-6,5%; p<0.03) and in the D-8 group after 7 days (197.4+/-10.4; p<0.04). Cyclic strain had a significant influence on ALP-secretion (F=7.5; p<0.01). In the D-8 group there was a significant increase in OC secretion after 4 days (140.9+/-12.5%; p<0.05).; p<0.01). The effect of stretching was significantly stronger than that of dexamethasone (F=17.2 vs. 1.8). Collagen I (Col I) expression was upregulated in D+8 cultures after 4 days (215.0+/-53.3 p<0.04) and after seven days (166.7+/-55.7; p<0.04). Collagen III (Col III) expression was upregulated in D+2 and D+8 cultures after 4 days (200.7+/-16.3 and 185.9+/-12.7; p<0.04) and after seven days (154.4+/-10.1 and 118.8+/-16.4; p<0.04). There was a significant increase of Cbfa1 expression in D+8 cultures at all investigated time intervals (day 1: 105.5+/-3.7%; day 4: 104.7+/-3.0%; day 7: 104.4+/-2.1%; p<0.03). Stretching (F=20.0; p<0.01) was a stronger contributor to Cbfa-1 expression than dexamethasone (F=12.1; p<0.01). Cyclical mechanical stimulation with 8% elongation increases ALP and OC levels and upregulates Col I and III synthesis and Cbfa1 expression. In the short term, cyclical stretching is a stronger differentiation factor than dexamethasone. Cyclical stretching and dexamethasone both enhance the osteogenic commitment of hBMSC.

Alteration of fracture stability influences chondrogenesis, osteogenesis and immigration of macrophages.

Mechanical conditions at the fracture line determine the mode of fracture healing (osteonal versus non-osteonal bone union). The aim of this study was to investigate the influence of differing degrees of fracture stability on the time course of chondrogenesis, enchondral ossification and immigration of macrophages into the fracture callus. Using a fracture model of the rat's tibia, histological (Azan staining), immunohistological (antibodies directed against the macrophage-specific surface antigen ED2), and molecular biological techniques (expression of the mRNA of the cartilage-specific collagen IX, osteocalcin - a marker for mature osteoblasts - and the macrophage-specific macrosialin) were employed. In terms of histology and molecular biology (collagen IX mRNA expression) chondrogenesis in the fracture gap continued for longer in less stable fractures. In more stable fractures bone formation - identified by osteocalcin mRNA expression - increased from day 12 onwards. The expression of the macrophage-specific surface antigen ED2 and the mRNA of macrosialin was more pronounced but of shorter duration in the more stable fractures. This study shows that differing degrees of fracture stability not only influence the interplay between osteogenesis and chondrogenesis but also alter the kinetics of macrophage immigration into the fracture callus. These findings could aid in better understanding the cytobiologic mechanisms of callus formation and may suggest that macrophages are an important factor not only in soft tissue healing but also in bone healing.

Long-time stability of a low-energy electron diffraction spin polarization analyzer for magnetic imaging.

The time stability of a polarization analyzer that is used for imaging of magnetic structures in a scanning electron microscope with spin polarization analysis (spin-SEM or SEMPA) is investigated. The detector is based on the diffraction of low-energy electrons at a W(100) crystal at 104.5 eV (LEED detector). Due to the adsorption of hydrogen from residual gas, a change of the scattering conditions is found that causes an angular shift of the LEED beams as well as changes of intensity. The quality factor, which describes the efficiency of the detector in SEMPA application, however, is found to be almost constant up to a hydrogen coverage of θ ≈ 0.25. This gives stable working conditions within roughly 1 h at vacuum conditions of 10(-10) mbar.