RESUMO
Understanding and controlling exciton properties are important for the design of 2D semiconductors, such as monolayer transition metal dichalcogenides (TMDCs) and 2D halide perovskites (HPs). This paper demonstrates that the widespread strategy used for the exciton engineering of 2D HPs, based on dielectric mismatch, is flawed since dielectric mismatch has very little correlation with exciton properties. For monolayer TMDCs, however, the dielectric mismatch is shown to be more important.
RESUMO
At the very heart of the global semiconductor industry lies the omnipresent push for new materials discovery. New materials constantly rise and fall out of fashion in the scientific literature, with those passing an initial phase of research scrutiny becoming hotbeds of characterization and optimization efforts. Yet, innumerable hours of painstaking research have been devoted to materials that have ultimately fallen by the wayside after crossing over an indefinable threshold, whereupon historical optimism is met with newfound skepticism. Materials have to perform well, and they have to do it quickly. In the past decade, metal-halide perovskites (MHPs) have garnered widespread attention. The hegemonic view in both academic and industrial circles is that these materials could be engineered to meet the demands of the semiconductor industry. Their promise as inexpensive solar cell devices is highly attractive, and it has been nothing short of remarkable that efficiencies have risen from 3.8% in 2009 to more than 25.5% in 2021. Moreover, MHPs are poised to be revolutionary materials in more ways than one. The highest MHP LED efficiency was recently reported (23.4%), and MHPs have demonstrated promise in photodetectors, memristors, and transistors. However, the many excellent properties of MHPs are contrasted by longstanding stability and reproducibility limitations that have hindered their commercialization. Overcoming the limitations of MHPs is ultimately a materials engineering problem, which should be solved by mapping more precise relationships between structure, composition, and device performance. In 1958, Francis Crick famously developed the central dogma of molecular biology which describes the unidirectional flow of information in biological systems. In the words of Crick, "nature has devised a unique instrument in which an underlying simplicity is used to express great subtlety and versatility." In this Account, taking inspiration from the hierarchical organization of nature, we describe a hierarchical approach to materials engineering of organic metal-halide semiconductors. We demonstrate that organo-metal halide semiconductors' dimensionality, composition, and morphology dictate their optoelectronic properties and can be exploited in defining more explicit relationships between structure and function. Here, we traverse three-dimensional (3D), two-dimensional (2D), and one-dimensional (1D) organo-metal halide semiconductors, detailing the morphological and compositional differences in each and the implications that can be drawn within each domain on the engineering process. Control over ion migration pathways via morphology engineering as well as control over charge formation in organic-inorganic semiconductors is demonstrated. Fundamental insights into the amount of static and dynamic disorder in the MHP lattice are provided, which can be continuously tuned as a function of composition and morphology. Using electroabsorption spectroscopy on 2D MHPs, a disorder-induced dipole moment in the exciton proportional to the summed value of static and dynamic disorder is measured. Spectroscopic isolation of exciton features in 2D MHP electroabsorption spectra allows us to obtain precise, model-independent measurements of exciton binding energies to study the effect of chemical substitutions, such as Sn2+ â Pb2+, on the value of the exciton binding energy. Finally, we conclude that this multidimensional platform, with the aid of machine learning and robotics, will be foundational in accurately predicting structure-property-device relationships in organo-metal halide semiconductors in the future.
RESUMO
A key feature of monolayer semiconductors, such as transition-metal dichalcogenides, is the poorly screened Coulomb potential, which leads to a large exciton binding energy (E_{b}) and strong renormalization of the quasiparticle band gap (E_{g}) by carriers. The latter has been difficult to determine due to a cancellation in changes of E_{b} and E_{g}, resulting in little change in optical transition energy at different carrier densities. Here, we quantify band-gap renormalization in macroscopic single crystal MoS_{2} monolayers on SiO_{2} using time and angle-resolved photoemission spectroscopy. At an excitation density above the Mott threshold, E_{g} decreases by as much as 360 meV. We compare the carrier density-dependent E_{g} with previous theoretical calculations and show the necessity of knowing both doping and excitation densities in quantifying the band gap.
RESUMO
This study uses the formation of a mixed metal oxide inside ferritin to tune the band gap energy of the ferritin mineral. The mixed metal oxide is composed of both Co and Mn, and is formed by reacting aqueous Co2+ with [Formula: see text] in the presence of apoferritin. Altering the ratio between the two reactants allowed for controlled tuning of the band gap energies. All minerals formed were indirect band gap materials, with indirect band gap energies ranging from 0.52 to 1.30 eV. The direct transitions were also measured, with energy values ranging from 2.71 to 3.11 eV. Tuning the band gap energies of these samples changes the wavelengths absorbed by each mineral, increasing ferritin's potential in solar-energy harvesting. Additionally, the success of using [Formula: see text] in ferritin mineral formation opens the possibility for new mixed metal oxide cores inside ferritin.
RESUMO
This paper investigates the comproportionation reaction of MnII with [Formula: see text] as a route for manganese oxide nanoparticle synthesis in the protein ferritin. We report that [Formula: see text] serves as the electron acceptor and reacts with MnII in the presence of apoferritin to form manganese oxide cores inside the protein shell. Manganese loading into ferritin was studied under acidic, neutral, and basic conditions and the ratios of MnII and permanganate were varied at each pH. The manganese-containing ferritin samples were characterized by transmission electron microscopy, UV/Vis absorption, and by measuring the band gap energies for each sample. Manganese cores were deposited inside ferritin under both the acidic and basic conditions. All resulting manganese ferritin samples were found to be indirect band gap materials with band gap energies ranging from 1.01 to 1.34 eV. An increased UV/Vis absorption around 370 nm was observed for samples formed under acidic conditions, suggestive of MnO2 formation inside ferritin.
RESUMO
Improving charge insertion into intercalation hosts is essential for crucial energy and memory technologies. The layered material TiS2 provides a promising template for study, but further development of this compound demands improvement to its ion kinetics. Here, we report the incorporation of Se atoms into TiS2 nanobelts to address barriers related to sluggish ion motion in the material. TiS1.8Se0.2 nanobelts are synthesized through a solid-state method, and structural and electrochemical characterizations reveal that solid solutions based on TiS1.8Se0.2 nanobelts display increased interlayer spacing and electrical conductivity compared to pure TiS2 nanobelts. Cyclic voltammetry and electrochemical impedance spectroscopy indicate that the capacitive behavior of the TiS2 electrode is improved upon Se incorporation, particularly at low depths of discharge in the materials. The presence of Se in the structure can be directly related to an increased pseudocapacitive contribution to electrode behavior at a low Li+ content in the material and thus to improved ion kinetics in the TiS1.8Se0.2 nanobelts.
RESUMO
Self-doping is a particular doping method that has been applied to a wide range of organic semiconductors. However, there is a lack of understanding regarding the relationship between dopant structure and function. A structurally diverse series of self-n-doped perylene diimides (PDIs) is investigated to study the impact of steric encumbrance, counterion selection, and dopant/PDI tether distance on functional parameters such as doping, stability, morphology, and charge-carrier mobility. The studies show that self-n-doping is best enabled by the use of sterically encumbered ammoniums with short tethers and Lewis basic counterions. Additionally, water is found to inhibit doping, which concludes that thermal degradation is merely a phenomenological feature of certain dopants, and that residual solvent evaporation is the primary driver of thermally activated doping. In situ grazing-incidence wide-angle X-ray scattering studies show that sample annealing increases the π-π stacking distance and shrinks grain boundaries for improved long-range ordering. These features are then correlated to contactless carrier-mobility measurements with time-resolved microwave conductivity before and after thermal annealing. The collective relationships between structural features and functionality are finally used to establish explicit self-n-dopant design principles for the future design of materials with improved functionality.
RESUMO
Perylene diimides (PDIs) have garnered attention as organic photocatalysts in recent years for their ability to drive challenging synthetic transformations, such as aryl halide reduction and olefin iodoperfluoroalkylation. Previous work in this area employs spectator pendant groups attached to the imide nitrogen positions of PDIs that are only added to impart solubility. In this work, we employ electron-rich ammonium iodide or ammonium hydroxide pendant groups capable of self-n-doping the PDI core to form radical anions (R â¢- ) and dianions (D â¢â¢2- ). We observe R â¢- formation is favored at low concentrations where aliphatic linkers are able to freely rotate, while D â¢â¢2- formation is favored at elevated concentrations likely due to Coulombic stabilization between adjacent chromophores in a similar manner to that of Kasha exciton stabilization. Cyclic voltammetric measurements are consistent with steric encumbrance increasing the Lewis basicity of anions through Coulombic destabilization. However, sterics also inhibit dianion formation by disrupting aggregation. Finally, femtosecond transient absorption measurements reveal that low wavelength excitation (400 nm) preferentially favors the excitation of R â¢- to the strongly reducing doublet excited state 2[R â¢- ]*. In contrast, higher wavelength excitation (520 nm) favors the formation of the singlet excited state 1[N]*. These findings highlight the importance of dopant architecture, counterion selection, excitation wavelength, and concentration on R â¢- and D â¢â¢2- formation, which has substantial implications for future photocatalytic applications. We anticipate these findings will enable more efficient systems based on self-n-doped PDIs.
RESUMO
OBJECTIVE: To determine the thickness of the calvarium in patients with spontaneous cerebrospinal fluid (CSF) leaks. STUDY DESIGN: Case control study. SETTING: University of Iowa Hospitals and Clinics. PATIENTS: Those with a confirmed spontaneous CSF leak compared to non-obese (body mass index, BMI < 30) and obese (BMI ≥ 30) cochlear implant (CI) control groups. All patients had to have temporal bone CT scans that fit specified criteria. INTERVENTION: Bilateral volumetric analysis of the squamous temporal bone and the zygoma in all patients. Assessment of patient age, sex, BMI, and medical comorbidities. MAIN OUTCOME MEASURE: Assessment of the average thickness of the squamous temporal bone and zygoma compared to control groups. RESULTS: The average BMI of patients with spontaneous CSF leaks was significantly higher than non-obese CI controls (43.73 ± 9.19 vs. 24.60 ± 3.10; P < 0.0001). The calvarium in patients with spontaneous CSF leaks was 23% thinner than both non-obese CI controls (3.29 ± 0.68 vs. 4.25 ± 0.58; P < 0.0001) and obese CI controls (3.29 ± 0.68 vs. 4.27 ± 0.68; P < 0.0001). In addition, the skull thickness of obese CI patients (body mass index, BMI = 37.34 ± 6.1) was not significantly different from non-obese CI controls (4.27 ± 0.68 vs. 4.25 ± 0.58; P = 0.92). The extracranial zygoma was not significantly different among the three groups (ANOVA = 0.9). In our study groups, 5.8% of both CI control groups had the diagnosis of obstructive sleep apnea (OSA), whereas 46.2% of the spontaneous CSF leak patients presented with the diagnosis of OSA. CONCLUSION: Patients with spontaneous CSF leak are more likely to be obese, have the diagnosis of OSA, and show thinning of their entire calvarium that is independent of BMI. These data suggest an additional obesity-associated intracranial process contributes to skull thinning.
Assuntos
Vazamento de Líquido Cefalorraquidiano/diagnóstico por imagem , Crânio/diagnóstico por imagem , Osso Temporal/diagnóstico por imagem , Adulto , Idoso , Índice de Massa Corporal , Estudos de Casos e Controles , Vazamento de Líquido Cefalorraquidiano/complicações , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Obesidade/complicações , Obesidade/patologia , Radiografia , Estudos RetrospectivosRESUMO
HYPOTHESIS: Elevated levels of hsa-microRNA-21 (miR-21) in vestibular schwannomas (VSs) may contribute to tumor growth by downregulating the tumor suppressor phosphatase and tensin homolog (PTEN) and consequent hyperactivation of protein kinase B (AKT), a key signaling protein in the cellular pathways that lead to tumor growth. BACKGROUND: Vestibular schwannomas are benign tumors that arise from the vestibular nerve. Left untreated, VSs can result in hearing loss, tinnitus, vestibular dysfunction, trigeminal nerve dysfunction, and can even become life threatening. Despite efforts to characterize the VS transcriptome, the molecular pathways that lead to tumorigenesis are not completely understood. MicroRNAs are small RNA molecules that regulate gene expression posttranscriptionally by blocking the production of specific target proteins. METHODS: We examined miR-21 expression in VSs. To determine the functional significance of miR-21 expression in VS cells, we transfected primary human VS cultures with anti-miR-21 or control, scrambled oligonucleotides. RESULTS: We found consistent overexpression of miR-21 when compared with normal vestibular nerve tissue. Furthermore, elevated levels of miR-21 correlated with decreased levels of PTEN, a known molecular target of miR-21. Anti-miR-21 decreased VS cell proliferation in response to platelet-derived growth factor stimulation and increased apoptosis, suggesting that increased miR-21 levels contributes to VS growth. CONCLUSION: Because PTEN regulates signaling through the growth-promoting phosphoinositide 3-kinase/AKT pathway, our findings suggest that miR-21 may be a suitable molecular target for therapies aimed specifically at reducing VS growth.