Antibacterial and Antifungal Activities of PMMAs Implanted Fluorine and/or Silver Ions by Plasma-Based Ion Implantation with Argon.

The purpose of this study was to examine the anti-oral microorganism effects of fluorine and/or silver ions implanted into acrylic resin (PMMA) using plasma-based ion implantation (PBII) with argon gas. The experimental PMMA specimens were implanted with F and Ag ions alone or simultaneously by the PBII method using Ar or Ar/F2 gases and Ag mesh. The surface characteristics were evaluated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM). Moreover, the antibacterial activity against Streptococcus mutans (S. mutans) and the antifungal activity against Candida albicans (C. albicans) were examined by the adenosine-5'-triphosphate (ATP) emission luminescence method. XPS spectra of the modified specimens revealed peaks due to F in the Ar/F and the Ar/F+Ag groups, and due to Ag in the Ar+Ag and the Ar/F+Ag groups. The water contact angle increased significantly due to the implantation of Ar, F, and Ag. In the AFM observations, the surface roughness of the Ar/F and the Ar/F+Ag groups increased significantly by less than 5 nanometers. The presence of F and Ag was found to inhibit S. mutans growth in the Ar+Ag and the Ar/F+Ag groups. However, this method provided no significant antifungal activity against C. albicans.

Effects of Powdery Cellulose Nanofiber Addition on the Properties of Glass Ionomer Cement.

In this study, we aimed to evaluate the effect of the addition of powdery cellulose nanofibers (CNFs) on the mechanical properties of glass ionomer cement (GIC) without negatively affecting its chemical properties. Commercial GIC was reinforced with powdery CNFs (2-8 wt.%) and characterized in terms of flexural strength, compressive strength, diametral tensile strength, and fluoride-ion release properties. Powdery CNFs and samples subjected to flexural strength testing were observed via scanning electron microscopy. CNF incorporation was found to significantly improve the flexural, compressive, and diametral tensile strengths of GIC, and the corresponding composite was shown to contain fibrillar aggregates of nanofibers interspersed in the GIC matrix. No significant differences in fluoride-ion release properties were observed between the control GIC and the CNF-GIC composite. Thus, powdery CNFs were concluded to be a promising GIC reinforcement agent.

Influence of Porous Spherical-Shaped Hydroxyapatite on Mechanical Strength and Bioactive Function of Conventional Glass Ionomer Cement.

Glass-ionomer-cement (GIC) is helpful in Minimal Intervention Dentistry because it releases fluoride ions and is highly biocompatible. The aim of this study is to investigate the mechanisms by which hydroxyapatite (HAp) improves the mechanical strength and bioactive functioning of GIC when these materials are combined to make apatite ionomer cement (AIC). A conventional GIC powder was mixed with porous, spherical-HAp particles (HApS), crystalline HAp (HAp200) or one of two types of cellulose. The micro-compressive strengths of the additive particles were measured, and various specimens were evaluated with regard to their compressive strengths (CS), fluoride release concentrations (fluoride electrode) and multi-element release concentrations. The AIC was found to release higher concentrations of fluoride (1.2 times) and strontium ions (1.5 times) compared to the control GIC. It was detected the more release of calcium originated from HApS than HAp200 in AIC. The CS of the AIC incorporating an optimum level of HAp was also significantly higher than that of the GIC. These results suggest that adding HAp can increase the release concentration of ions required for remineralization while maintaining the CS of the GIC. This effect does not result from a physical phenomenon, but rather from chemical reactions between the HAp and polyacrylic acid of GIC.

Effects of porous-hydroxyapatite incorporated into glass-ionomer sealants.

The purpose of the present study was to evaluate the mechanical and chemical properties of a novel glass ionomer cement for use as a pit and fissure sealant containing a porous hydroxyapatite, namely, apatite ionomer cement (AIC). Control sealant samples were used Fuji III (GIC-S). The experiment sealant samples (AIC-S) consisted of porous spherical hydroxyapatite (HApS) particles added at 28 wt% to GIC-S powder. The GIC-S and AIC-S samples were evaluated through mechanical strength measurements, scanning electron microscopy observations, energy dispersive X-ray spectroscopy analysis, fluoride ion release tests, and antibacterial tests. The flexural strength of the AIC-S was significantly higher than that of GIC-S for each period, 1 h, 24 h and 1 year. The fluoride release dose for AIC-S was consistently higher than that for GIC-S. In addition, the antibacterial properties of AIC-S were superior to those of GIC-S. The novel AIC-S may be a more suitable sealant material for pits and fissures with intact and/or infected enamel.