Effect of enzymatic Maillard reaction conditions on physicochemical properties, nutrition, fatty acids composition and key aroma compounds of fragrant rapeseed oil.

BACKGROUND: A new enzymatic hydrolysis-based process inspired by the Maillard reaction can produce strong flavored, high-value rapeseed oil that meets safety requirements. In the present study, the effect of reaction time (10-30 min) and temperature (130-160 °C) on the physicochemical properties, nutritional status, fatty acids composition and key aroma compounds of fragrant rapeseed oil (FRO) was investigated. RESULTS: An increasing reaction time and temperature substantially decreased the total tocopherol, polyphenol and sterol contents of FRO, but increased benzo[a]pyrene content, as well as the acid and peroxide values, which did not exceed the European Union legislation limit. Among the volatile components, 2,5-dimethyl was the main substance contributing to the barbecue flavor of FRO. The 150 °C for 30 min reaction conditions produced a FRO with a strong, fragrant flavor, with high total tocopherol (560.15 mg kg-1 ), polyphenol (6.82 mg kg-1 ) and sterol (790.65 mg kg-1 ) contents; acceptable acid (1.60 mg g-1 ) and peroxide values (4.78 mg g-1 ); and low benzo[a]pyrene (1.39 mg g-1 ) content. These were the optimal conditions for the enzymatic Maillard reaction, according to the principal component analysis. Furthermore, hierarchical cluster analysis showed that reaction temperature had a stronger effect on FRO than reaction time. CONCLUSION: The optimal enzymatic Maillard reaction conditions for the production of FRO are heating at 150 °C for 30 min. These findings provide new foundations for better understanding the composition and flavor profile of FRO, toward guiding its industrial production. © 2023 Society of Chemical Industry.

Resonance and bifurcation of fractional quintic Mathieu-Duffing system.

In this paper, the main subharmonic resonance of the Mathieu-Duffing system with a quintic oscillator under simple harmonic excitation, the route to chaos, and the bifurcation of the system under the influence of different parameters is studied. The amplitude-frequency and phase-frequency response equations of the main resonance of the system are determined by the harmonic balance method. The amplitude-frequency and phase-frequency response equations of the steady solution to the system under the combined action of parametric excitation and forced excitation are obtained by using the average method, and the stability conditions of the steady solution are obtained based on Lyapunov's first method. The necessary conditions for heteroclinic orbit cross section intersection and chaos of the system are given by the Melnikov method. Based on the separation of fast and slow variables, the bifurcation phenomena of the system under different conditions are obtained. The amplitude-frequency characteristics of the total response of the system under different excitation frequencies are investigated by analytical and numerical methods, respectively, which shows that the two methods achieve consistency in the trend. The influence of fractional order and fractional derivative term coefficient on the amplitude-frequency response of the main resonance of the system is analyzed. The effects of nonlinear stiffness coefficient, parametric excitation term coefficient, and fractional order on the amplitude-frequency response of subharmonic resonance are discussed. Through analysis, it is found that the existence of parametric excitation will cause the subharmonic resonance of the Mathieu-Duffing oscillator to jump. Finally, the subcritical and supercritical fork bifurcations of the system caused by different parameter changes are studied. Through analysis, it is known that the parametric excitation coefficient causes subcritical fork bifurcations and fractional order causes supercritical fork bifurcations.

Changes in the physicochemical properties and antioxidant capacity of Sichuan hotpot oil.

This study aimed to develop nutritious and healthy Sichuan hotpot oil. Four blended oil formulas were formulated using MATLAB based on the fatty acid composition of four base constituents (beef tallow, mutton tallow, peanut oil, and palm oil). The sensory characteristics, physicochemical properties, nutritional composition, harmful substances, and antioxidant capacity of the oils were analyzed during the boiling process. A blend of 60% beef tallow + 10% mutton tallow + 10% peanut oil + 20% palm oil exhibited a low level of peroxide (0.03 g/100 g) and malondialdehyde (0.04 mg/kg), and high phytosterol content (1028.33 mg/kg), which was the suitable hotpot blending oil. Furthermore, the changes in the physicochemical properties during boring were low, with a high retention rate of phytosterol (94.85%), and the levels of 3,4-benzopyrene (1.12 µg/kg) and 3-monochloropropane-1,2-diol ester (0.67 mg/kg) were both lower than the recommended limits. This study will provide a theoretical basis for the advancement of the hotpot oil industry.

Effects of Structural and Compositional Changes of Nanochloropsis oceania after Enzyme Treatment on EPA-Rich Lipids Extraction.

Improved methods for the extraction of eicosapentaenoic acid (EPA), an essential and economically important polyunsaturated fatty acid, are urgently required. However, lipid extraction rates using food-grade solvents such as ethanol are usually low. To improve the ethanol-based extraction rate, and to elucidate the relevant mechanisms, we used cellulase and laccase to treat powdered Nannochloropsis, one of the most promising microalgal sources of EPA. Cellulase and laccase synergistically increased lipid yields by 69.31% and lipid EPA content by 42.63%, by degrading the amorphous hemicellulose and cellulose, improving crystallinity, and promoting the release and extraction of lysodiacylglyceryltrimethylhomoserine. Scanning electron microscopy showed that cell morphology was substantially altered, with cell-wall rupture, loss of cell boundaries, and the release of intracellular substances. In conclusion, Nannochloropsis lipid yields may be directly linked to cell-wall hemicellulose structure, and enzymatic treatment to alter this may improve lipid yields.

Comparison of Different Extraction Processes on the Physicochemical Properties, Nutritional Components and Antioxidant Ability of Xanthoceras sorbifolia Bunge Kernel Oil.

In this study, we investigated and compared the oil yield, physicochemical properties, fatty acid composition, nutrient content, and antioxidant ability of Xanthoceras sorbifolia Bunge (X. sorbifolia) kernel oils obtained by cold-pressing (CP), hexane extraction (HE), aqueous enzymatic extraction (AEE), and supercritical fluid extraction (SFE). The results indicated that X. sorbifolia oil contained a high percentage of monounsaturated fatty acids (49.31-50.38%), especially oleic acid (30.73-30.98%) and nervonic acid (2.73-3.09%) and that the extraction methods had little effect on the composition and content of fatty acids. X. sorbifolia oil is an excellent source of nervonic acid. Additionally, the HE method resulted in the highest oil yield (98.04%), oxidation stability index (9.20 h), tocopherol content (530.15 mg/kg) and sterol content (2104.07 mg/kg). The DPPH scavenging activity rates of the oil produced by SFE was the highest. Considering the health and nutritional value of oils, HE is a promising method for X. sorbifolia oil processing. According to multiple linear regression analysis, the antioxidant capacity of the oil was negatively correlated with sterol and stearic acid content and positively correlated with linoleic acid, arachidic acid and polyunsaturated fatty acid content. This information is important for improving the nutritional value and industrial production of X. sorbifolia.

Physicochemical properties of rice bran blended oil in deep frying by principal component analysis.

This study aimed to obtain a rice bran blended oil with good quality in deep frying. The thermal stability, nutrients and harmful substances of rice bran oil (RBO) and other four oils (palm oil, PO; cottonseed oil, CO; sunflower oil, SuO; soybean oil, SO) were analyzed. Besides, the blended oil formulas were established by the principal component analysis method, and their physicochemical properties, frying characteristic indicators, nutrients, and harmful substances were compared. The results provided that two suitable blended oil formulas (F1: 50% RBO + 40% PO + 10% CO; F2: 60% RBO + 35% PO + 5% CO) of good frying performance were attained by principal component analysis. The acid value (1.19 mg/g), peroxide value (0.09 meq/kg), residual oil rate (8.07%), 3-MCPD ester reduction content (2.33 mg/kg), benzopyrene concentration content (0.95 µg/kg) and vitamin E consumption rate (67.86%) in F2 were lower than that in F1. Moreover, the oryzanol retention rate (87.84%) of F2 was higher than that of F1. In summary, F2 was more conducive to human health and more suitable than F1 in deep-frying. This information had an important directive on the industrial production of rice bran blend oil. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05472-7.

Epidemiological and clinical characteristics of respiratory viral infections in children in Shanghai, China.

Acute respiratory tract infections (ARTIs) due to various viruses are not only the most common causes of upper and lower respiratory infection but are also major causes of morbidity and mortality in children. In this study, we investigated the prevalence and clinical characteristics of children with virus-related ARTIs and determined the spectrum of respiratory viruses and their correlation with meteorological variables in Jiading District, Shanghai, China. Nasopharyngeal swabs from 2819 children with ARTIs were collected from August 2011 to December 2014, and used for detection of respiratory viruses by multiplex RT-PCR. Seventeen respiratory viruses were detected among 691 (24.5 %) of 2819 patients. The highest prevalence of respiratory viruses was detected in the age group of less than 1 year (29.0 %), and the prevalence decreased with age. This suggests that children less than one year old are the most susceptible to infection. Influenza virus (IFV) was the most frequently detected virus (5.8 %), followed by parainfluenza virus (PIV) (5.7 %), enterovirus (EV) (4.3 %), and respiratory syncytial virus (RSV) (3.6 %). Statistical analysis showed that epidemics of IFV, PIV and EV had distinct seasonal variations. Mean monthly temperature appeared to be the only meteorological factor associated with IFV and PIV infection. These findings will provide valuable information for decision-making, prevention and treatment of ARTIs in children.

[Qualitative-Quantitative Analysis of Rice Bran Oil Adulteration Based on Laser Near Infrared Spectroscopy].

The purpose of this study is mainly to have qualitative-quantitative analysis on the adulteration in rice bran oil by near-infrared spectroscopy analytical technology combined with chemo metrics methods. The author configured 189 adulterated oil samples according to the different mass ratios by selecting rice bran oil as base oil and choosing soybean oil, corn oil, colza oil, and waste oil of catering industry as adulterated oil. Then, the spectral data of samples was collected by using near-infrared spectrometer, and it was pre-processed through the following methods, including without processing, Multiplicative Scatter Correction(MSC), Orthogonal Signal Correction(OSC), Standard Normal Variate and Standard Normal Variate transformation DeTrending(SNV_DT). Furthermore, this article extracted characteristic wavelengths of the spectral datum from the pre-processed date by Successive Projections Algorithm(SPA), established qualitatively classified calibration methods of adulterated oil through classification method of Support Vector Machine(SVM), optimized model parameters(C, g) by Mesh Search Algorithm and determined the optimal process condition. In extracting characteristic wavelengths of the spectral datum from pretreatment by Backward interval Partial Least Squares(BiPLS) and SPA, quantitatively classified calibration models of adulterated oil through Partial Least Squares(PLS) and Support Vector Machine Regression(SVR) was established respectively. In the end, the author optimized the combination of model parameters(C, g) by Mesh Search Algorithm and determined the optimal parameter model. According to the analysis, the accuracy of prediction set and calibration set for SVC model reached 95% and 100% respectively. Compared with the prediction of the adulteration oil content of rice bran oil which was established by the PLS model, the SVR model is the better one, although both of them could implement the content prediction. Furthermore, the correlation coefficient R is above 0.99 and the Root Mean Square Error (MSE) is below 5.55 x 10(-4). The results show that the near-infrared spectroscopy technology is effective in qualitative-quantitative analysis on the adulteration of rice bran oil. And the method is applicable to analyze adulteration in other oils.

[Association between parainfluenza virus infection and climatic factors in children].

OBJECTIVE: To study the association between acute respiratory human parainfluenza virus (HPIV) infection and climatic factors in children. METHODS: A total of 2 526 throat swab samples were collected from children with acute respiratory infection who visited the Pediatric Clinic of Shanghai Jiading Nanxiang Hospital between 2011 and 2013. HPIV was detected by multiplex RT-PCR. Related meteorological data were collected, including monthly mean temperature, monthly mean humidity, and monthly total rainfall. The association between HPIV detection rate and climatic factors was analyzed by Spearman's or Pearson test. RESULTS: During the three years, the overall HPIV detection rate was 5.62% (142/2 526), and HPIV-1 was the most common type (46.5%), followed by HPIV-3 (31.0%), HPIV-2 (17.6%), and HPIV-4 (4.9%). There were significant differences in the detection rates of HPIV-1 and HPIV-2 in different seasons, and the detection rates of both were the highest in summer (P<0.05). HPIV positive rate was positively correlated with monthly mean temperature (r=0.598; P<0.01) and monthly total rainfall (rs=0.602; P<0.01). CONCLUSIONS: The activity of HPIV in children is correlated with climatic factors, particularly temperature and rainfall.

Production of Camellia oleifera Abel Seed Oil for Injection: Extraction, Analysis, Deacidification, Decolorization, and Deodorization.

Camellia seed oil (CSO), as a nutrient-rich edible oil, is widely used in foods, cosmetics, and other fields. In this work, the extraction, deacidification, decolorization, and deodorization processes of CSO were respectively optimized for meeting injectable oil standards. The results showed that the CSO extraction rate reached the highest level of 94% at optimized conditions (ultrasonic time, 31.2 min; reaction pH, 9.2; and reaction time, 3.5 h). The physicochemical indexes of CSO and 10 other vegetable oils were evaluated by the principal component analysis method, and the overall scores of vegetable oils were ranked as camellia seed oil > olive oil > rice oil > peanut oil > sesame oil > corn oil > soybean oil > sunflower oil > rapeseed oil > walnut oil > flaxseed oil. The physicochemical indicators of CSO were the most ideal among the 11 vegetable oils, which means that CSO is suitable as an injectable oil. Through the optimized processes of the deacidification, decolorization, and deodorization, the CSO acid value was reduced to 0.0515 mg KOH/g, the decolorization rate reached a maximum of 93.86%, and the OD430 was 0.015, meeting the requirement (≤0.045 of OD430) of injectable oil. After the deodorization process, these parameters of the refractive index, acid value, saponification value, iodine value, absorbance, unsaponifiable, moisture and volatiles, fatty acid composition, and heavy metal limits all met the pharmacopoeia standards of injectable oil in many countries and regions. The possibility of CSO as an injectable oil was first verified through refining-process optimization and nutritional index analysis, providing an important technical reference for the high-value utilization of vegetable oil.

Multifaceted analysis of the effects of roasting conditions on the flavor of fragrant Camellia oleifera Abel. seed oil.

Fragrant Camellia oleifera Abel. seed oil (FCSO), produced by a roasting process, is popular for its characteristic aroma. This study investigated the effects of various roasting temperatures (90℃, 120℃, 150℃, 180℃) and durations (20 min, 40 min, 60 min) on the flavor of FCSO by physicochemical properties, hazardous substances, sensory evaluation, and flavor analyses. The results showed that FCSO roasted at 120℃/20 min had a reasonable fatty acid composition with a lower acid value (0.16 mg/g), peroxide value (0.13 g/100 g), p-anisidine value (2.27), dibutyl phthalate content (0.04 mg/kg), and higher 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activity (224.51 µmol TE/kg) than other samples. A multivariate analysis of FCSO flavor revealed that the 120℃/20 min group had a higher grassy flavor score (5.3 score) from nonanoic acid and a lower off-flavor score (2.2 score) from 2-methylbutyric acid. The principal component analysis showed that 120℃/20 min could guarantee the best flavor and quality of FCSO. Therefore, this information can guide the preparation of FCSO.

Effects of different amino acid enzymatic preparations on the quality and flavor of fragrant rapeseed oil.

Enzymatically prepared aromatic oils commonly have high purity and aroma quality. However, amino acid type and content vary greatly according to the type of oil, which impacts overall aroma and quality. In this study, the effects of lysine (Lys), arginine (Arg), proline (Pro), and glutamic (Glu) acid on physicochemical indices, nutrients, hazardous substances, fatty acid composition, and flavor during fragrant rapeseed oil (FRO) enzymatic preparation were investigated using the Maillard reaction (MR). In the lysine-treated group, the unsaturated fatty acids (93.16 %), α-tocopherol (183.06 mg/kg), γ-tocopherol (404.37 mg/kg), and δ-tocopherol (12.69 mg/kg) contents were the highest, whereas the acid value (1.27 mg/g) and moisture (0.10 %) and benzo[a]pyrene (1.45 µg/kg) contents were the lowest. Sensory evaluation showed that lysine effectively enhanced FRO flavor by enhancing the nutty/toasted flavor (4.80 scores). Principle component analysis (PCA) showed that the nutty/toasted flavor correlated mainly with 2,6-dimethylpyrazine, 2,5-dimethyl-pyrazine, 2-methyl-pyrazine, and trimethylpyrazine, nutty/toasted flavor strength increased with pyrazine content, which were the highest in the lysine group (24.02 µg/g). This study provides a guide for FRO preparation by adding external MR prerequisites.

Synthesis and Characterization of Emulsifiers Based on the Maillard Reaction and Its Application in Stabilized DHA Algal Oil Nanoemulsions.

The aim of this study was to optimize the formation of sodium caseinate (CS) and gum arabic (GA) complexes through the Maillard reaction and to evaluate their effectiveness in improving the emulsification properties and stability of docosahexaenoic acid (DHA) nanoemulsions. First, the best target polysaccharides were selected, and the best modification conditions were determined using orthogonal experiments. Secondly, the response surface experiments were used to optimize the preparation process of the emulsion. The stability, in vitro digestion characteristics, and rheological characteristics of the emulsion prepared by means of CS-GA were compared with the emulsion prepared using a whey protein isolate (WPI). After the orthogonal test, the optimal modification conditions were determined to be a reaction time of 96 h, a CS-GA mass ratio of 1:2, a reaction temperature of 60 °C, and a degree of grafting of 44.91%. Changes in the infrared (IR), Raman, ultraviolet (UV), and endogenous fluorescence spectra also indicated that the complex structure was modified. The response surface test identified the optimal preparation process as follows: an emulsifier concentration of 5 g/L, an oil-phase concentration of 5 g/L, and a homogenization frequency of five, and the emulsion showed good stability. Therefore, the use of a nanoemulsion as a nanoscale DHA algal oil delivery system is very promising for extending the shelf life and improving the stability of food.

Effects of different oleogelators on the structural properties and composition of iron walnut-oil oleogels.

In this study, we compared the quality of iron walnut oil (IWO) oleogels prepared with different oleogelators, including γ-oryzanol/ß-sitosterol (OZ-PS), γ-oryzanol/triglyceride (OZ-TC), monoglycerides (MGS), beeswax (BW), beeswax-monoglycerides (BW-MGS), and carnauba wax (CW). The physicochemical and component properties, rheological and textural parameters, macroscopic morphologies, and antioxidant capacities of the resulting oleogels were analyzed. In addition, their microscopic properties were analyzed using Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD) spectroscopy, and polarized light microscopy (PLM). The results showed that the gel structures produced by different oleogelators did not change the fatty acid composition of IWO. In addition, the IWO oleogel prepared with OZ-PS had a more stable network structure, excellent hardness at 4℃ (1116.51 g), better antioxidant capacity (766.50 µmol TE/kg) and higher total phenolic content (14.98 mg/kg) than any other experimental IWO oleogels. Moreover, comprehensive ranking by principal component analysis of numerous characteristics showed that the OZ-PS oleogel (2.533) ranked first among the six oleogels studied. Therefore, the IWO oleogel prepared with OZ-PS is a promising product, and our results provide guidance for the preparation of IWO oleogels, such as to increase their applications in the food industry.

[Low carbon number fatty acid content prediction based on near-infrared spectroscopy].

The rapid prediction of the low-carbon fatty acids (C < or = 14) content in grease samples was achieved by a mathematical model established by near infrared spectroscopy combined with support vector machine regression (SVR). In the present project, near-infrared spectrometer SupNIR-5700 was used to collect near-infrared spectra of 58 samples; partial least square (PLS) was applied to remove the strange samples, and principal component analysis (PCA) was conducted on the measurements; radial basis function (RBF) kernel function was selected to establish a regression model supporting vector machine, and then detailed analysis and discussions were conducted concerning their spectral preprocessing and parameters optimization methods. Experimental results showed that by applying particle swarm optimization (PSO) the model demonstrated improved performance, stronger generalization ability, better prediction accuracy and robustness. In the second pretreatment method after PSO, when the optimization parameters are: C = 2.085, gamma = 22.20, the prediction set and calibration set correlation coefficient (gamma) reached 0.998 0 and 0.925 8, respectively; and root mean square errors (MSE) were 0.000 4 and 0.014 3, respectively. Research results proved that the method based on near infrared spectroscopy and PSO-SVR for accurate and fast prediction of the low-carbon fatty acid content in vegetable oil is feasible.

Assessment of the Physicochemical Properties of Fragrant Rapeseed Blended Hotpot Oil by Principal Component Analysis.

In this study, a nutritious, healthy Chongqing hotpot oil with excellent flavor was blended while considering nutrition, flavor, and health aspects. Four blended hotpot oils prepared from fragrant rapeseed, palm, sesame, and chicken oils were analyzed to determine their physicochemical properties, antioxidant capacities, levels of harmful substances, and nutritional compositions, and their sensory qualities were evaluated. Principal component analysis was performed to identify the best hotpot oil (10% chicken oil + 20% palm oil + 10% sesame oil + 60% fragrant rapeseed oil), which exhibited good antioxidant capacity (Oxidation Stability Index: 7.95 h; 2,2-diphenyl-1-picrylhydrazyl: 168.6 µmol/kg, 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate): 116.7 µmol/kg, and ferric-reducing/antioxidant power: 63.9 µmol/kg), a high sensory score (7.7/10), stable physicochemical properties (acid value: 0.27 mg/g and peroxide value: 0.01 g/100 g), and high tocopherol (54.22%), and phytosterol retention (98.52%) after boiling for 8 h. Although the 3,4-benzopyrene content of this hotpot oil exceeded the EU standard after boiling for 7 h, the increase in the amount of harmful substances was the lowest.

Effects of Extraction Strategies on Yield, Physicochemical and Antioxidant Properties of Pumpkin Seed Oil.

This study investigated the effects of three extraction methods, including cold pressing (CP), microwave pretreatment pressing (MP), and supercritical fluid extraction (SFE), on the yield, physicochemical properties, bioactive compounds content, and antioxidant properties of pumpkin seed oil (PSO). Furthermore, the correlation between bioactive compounds and the antioxidant properties of PSO was determined. The results revealed that the yield of PSO extracted using the three methods was in the order of SFE > MP > CP. Additionally, the PSO generated by SFE showed the highest unsaturated fatty acid content, followed by MP and CP. Additionally, MP-PSO exhibited the highest acid value and saponification value, while SFE-PSO displayed the highest moisture content, peroxide value, and iodine value. Moreover, the PSO generated by MP demonstrated superior antioxidant properties compared to that of PSOs from CP and SFE in the oxidation induction, DPPH, FRAP, and ABTS tests. Finally, the correlation analysis revealed that specific types of bioactive compounds, such as ß-sitosterol and γ-tocopherol, were highly correlated with the antioxidant properties of PSOs. Consequently, this study provides comprehensive knowledge regarding PSO extraction, physicochemical properties, bioactive compound extraction, and the correlated antioxidant properties.

Selection of Salt-Tolerance and Ester-Producing Mutant Saccharomyces cerevisiae to Improve Flavour Formation of Soy Sauce during Co-Fermentation with Torulopsis globosa.

Soy sauce, as a traditional seasoning, is widely favoured by Chinese and other Asian people for its unique colour, smell, and taste. In this study, a salt-tolerance Saccharomyces cerevisiae strain HF-130 was obtained via three rounds of ARTP (Atmospheric and Room Temperature Plasma) mutagenesis and high-salt based screening. The ethanol production of mutant HF-130 was increased by 98.8% in very high gravity fermentation. Furthermore, ATF1 gene was overexpressed in strain HF-130, generating ester-producing strain HF-130-ATF1. The ethyl acetate concentration of strain HF-130-ATF1 was increased by 130% compared to the strain HF-130. Finally, the soy sauce fermentation performance of Torulopsis globosa and HF-130-ATF1 was compared with T. globosa, HF-130, HF-130-ATF1, and Torulopsis and HF-130. Results showed ethyl acetate and isoamyl acetate concentrations in co-fermentation of T. globosa and HF-130-ATF1 were increased by 2.8-fold and 3.3-fold, respectively. In addition, the concentrations of ethyl propionate, ethyl caprylate, phenylethyl acetate, ethyl caprate, isobutyl acetate, isoamyl alcohol, phenylethyl alcohol, and phenylacetaldehyde were also improved. Notably, other three important flavour components, trimethylsilyl decyl ester, 2-methylbutanol, and octanoic acid were also detected in the co-fermentation of T. globosa and HF-130-ATF1, but not detected in the control strain T. globosa. This work is of great significance for improving the traditional soy sauce fermentation mode, and thus improving the flavour formation of soy sauce.

Optimization of Composite Decolorizer Efficacy Based on Decolorization Efficiency, Toxicity, and Nutritional Value of Rice Bran Oil.

This study compared the effect of five different adsorbents (activated clay, activated carbon, attapulgite clay, bentonite, diatomite) on the levels of nutrients, harmful substance retention, and decolorization in rice bran oil. Among the adsorbents tested, activated carbon displayed the highest decolorization efficiency (82.90%) and adsorption effect on 3,4-benzopyrene (BaP, 89.53%) and 3-monochloropropane-1,2-diol ester (41.55%), whereas activated clay had the highest oryzanol retention percentages (85.98%) and affordability. Activated carbon and activated clay were therefore selected as composite decolorizing agents. Based on single-factor and Box-Behnken response surface tests, the optimal conditions for decolorization efficiency (97.08%), oryzanol retention (89.62%), sterol retention (90.16%), vitamin E retention (79.91%), and benzo(a)pyrene adsorption percentages (95.98%) were determined to be achieved by using a 5% (w/w) composite decolorant (activated clay:activated carbon=5:1), at a temperature of 116℃, with an incubation time of 33 min. This study provides evidence to support the efficacy of compound decolorants, which may have practical use in large-scale industrial applications of edible oil decolorization during refinement.