Thermal responses of face-masked pedestrians during summer: An outdoor investigation under tree-shaded areas.

During the SARS-CoV-2 (COVID-19) pandemic, most citizens were cooperative towards the face-masking policy; however, undeniably, face masking has increased complaints of thermal discomfort to varying degrees and resulted in potential health hazards during summer. Thus, a thermal comfort survey was conducted under tree-shaded areas generally preferred by pedestrians to explore the thermal response of face-masked pedestrians. Thirty-two subjects, with and without masks, participated in walking experiments, and their thermal parameters and physiological indicators were recorded; moreover, the subjects were asked to fill in subjective questionnaires. The results showed that although tree shades significantly reduced the average radiant temperature, dampness in the mask may cause some discomfort symptoms, among which intense sweating (54.55%) and tachycardia (42.18%) accounted for the largest proportion. Based on thermal indices, it could be concluded that face-masking does not significantly affect the thermal comfort of subjects walking in shaded areas. Notably, a 30-min walk in tree-shaded areas with face masking does not adversely affect human health or quality of life. Thus, the present assessment of the thermal safety of humans in shaded environments provides reference data for determining thermal comfort levels during outdoor walking with face masking.

Comprehensive analysis of lncRNA-miRNA-mRNA networks during osteogenic differentiation of bone marrow mesenchymal stem cells.

BACKGROUND: Long non-coding RNA (lncRNA) plays crucial role in osteogenic differentiation of bone marrow mesenchymal stem cells (BMMSCs), involving in regulation of competing endogenous RNA (ceRNA) mechanisms and conduction of signaling pathways. However, its mechanisms are poorly understood. This study aimed to investigate lncRNAs, miRNAs and mRNAs expression profiles in rat BMMSCs (rBMMSCs) osteogenic differentiation, screen the potential key lncRNA-miRNA-mRNA networks, explore the putative functions and identify the key molecules, as the basis of studying potential mechanism of rBMMSCs osteogenic differentiation driven by lncRNA, providing molecular targets for the management of bone defect. METHODS: High-throughput RNA sequencing (RNA-seq) was used to determine lncRNAs, miRNAs, and mRNAs expression profiles at 14-day rBMMSCs osteogenesis. The pivotal lncRNA-miRNA and miRNA-mRNA networks were predicted from sequencing data and bioinformatic analysis, and the results were exported by Cytoscape 3.9.0 software. Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis were used for functional exploration. Real-time quantitative reverse transcription-polymerase chain reaction (qRT-PCR) was performed to validate lncRNAs, miRNAs and mRNAs. RESULTS: rBMMSCs were identified, and the osteogenic and adipogenic differentiation ability were detected. A total of 8634 lncRNAs were detected by RNA-seq, and 1524 differential expressed lncRNAs, of which 812 up-regulated and 712 down-regulated in osteo-inductive groups compared with control groups. 30 up-regulated and 61 down-regulated miRNAs, 91 miRNAs were differentially expressed in total. 2453 differentially expressed mRNAs including 1272 up-expressed and 1181 down-expressed were detected. 10 up-regulated lncRNAs were chosen to predict 21 down-regulated miRNAs and 650 up-regulated mRNAs. 49 lncRNA-miRNA and 1515 miRNA-mRNA interactive networks were constructed. GO analysis showed the most important enrichment in cell component and molecular function were "cytoplasm" and "protein binding", respectively. Biological process related to osteogenic differentiation such as "cell proliferation", "wound healing", "cell migration", "osteoblast differentiation", "extracellular matrix organization" and "response to hypoxia" were enriched. KEGG analysis showed differentially expressed genes were mainly enriched in "PI3K-Akt signaling pathway", "Signaling pathway regulating pluripotency of stem cells", "cGMP-PKG signaling pathway", "Axon guidance" and "Calcium signaling pathway". qRT-PCR verified that lncRNA Tug1, lncRNA AABR07011996.1, rno-miR-93-5p, rno-miR-322-5p, Sgk1 and Fzd4 were consistent with the sequencing results, and 4 lncRNA-miRNA-mRNA networks based on validations were constructed, and enrichment pathways were closely related to "PI3K-Akt signaling pathway", "Signaling pathway regulating pluripotency of stem cells" and "Wnt signaling pathway". CONCLUSIONS: lncRNAs, miRNAs and mRNAs expression profiles provide clues for future studies on their roles for BMMSCs osteogenic differentiation. Furthermore, lncRNA-miRNA-mRNA networks give more information on potential new mechanisms and targets for management on bone defect.

The management of bone defect using long non-coding RNA as a potential biomarker for regulating the osteogenic differentiation process.

Tissue engineered bone brings hope to the treatment of bone defects, and the osteogenic differentiation of stem cells is the key link. Inducing osteogenic differentiation of stem cells may be a potential approach to promote bone regeneration. In recent years, lncRNA has been studied in the field increasingly, which is believed can regulate cell cycle, proliferation, metastasis, differentiation and immunity, participating in a variety of physiology and pathology processes. At present, it has been confirmed that certain lncRNAs regulate the osteogenesis of stem cells and take part in mediating signaling pathways including Wnt/ß-catenin, MAPK, TGF-ß/BMP, and Notch pathways. Here, we provided an overview of lncRNA, reviewed its researches in the osteogenic differentiation of stem cells, emphasized the importance of lncRNA in bone regeneration, and focused on the roles of lncRNA in signaling pathways, in order to make adequate preparations for applying lncRNA to bone tissue Engineering, letting it regulate the osteogenic differentiation of stem cells for bone regeneration.

Differential circRNA and mRNA Expression Profiling During Osteogenic Differentiation in Rat Bone Marrow Mesenchymal Stem Cells.

BACKGROUND Circular RNAs (circRNAs) play important roles in gene expression and signaling pathways. The study aimed to identify the differential expression of circRNAs and mRNAs in the osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells (rBMSCs) and to explore the biological function of circRNAs in the osteogenic differentiation of rBMSCs. MATERIAL AND METHODS High-throughput sequencing was used to detect differentially expressed circular RNA and mRNA during osteogenic differentiation of rBMSCs. The RNAs were analyzed for Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment to predict their potential role in regulating rBMSC osteogenesis. MiRanda, Circatlas, and miRDB databases were used to predict target relationships between circRNA, miRNA, and mRNA.The regulatory network was constructed by Cytoscape (version 3.6.1). The RNA-Seq findings were validated by quantitative real-time PCR (qRT-PCR). RESULTS The results revealed that 29 differentially expressed circRNAs and 2453 differentially expressed mRNAs were detected during the osteogenic differentiation of rBMSCs. Many differentially expressed circRNAs were closely related to osteogenic differentiation of cells. Among them, circRNAs_1809 and Kitlg were the significantly increased circRNA and mRNA during osteogenic differentiation of rBMSCs. The ceRNA network showed that circRNA_1809 could target the Kitlg gene through miR-370-3p. CONCLUSIONS CircRNAs may play an important role in the osteogenic differentiation of rBMSCs. CircRNA_1809 may acts as a sponge for miR-370-3p and regulate the osteogenic differentiation of rBMSCs by targeting Kitlg; however, this hypothesis needs further verification. This study laid a theoretical foundation for further understanding the mechanism of circRNAs regulating osteogenic differentiation of rBMSCs.

A 3-Year Clinical Evaluation of Endodontically Treated Posterior Teeth Restored with Resin Nanoceramic Computer-Aided Design/Computer-Aided Manufacture (CAD/CAM)-Fabricated Partial Crowns.

BACKGROUND We aimed to investigate the clinical effects of resin nanoceramic (RNC) computer-aided design/computer-aided manufacture (CAD/CAM) partial crowns on posterior teeth after root canal treatment over a 3-year period. MATERIAL AND METHODS A total of 132 posterior teeth restored with CAD/CAM partial crowns were placed in 128 patients. The observation group (n=66) was restored with RNC restorations, while the control group received lithium disilicate-based glass ceramic (LDGC) CAD restorations. Using Federation dentaire internationale (FDI) World Dental Federation clinical criteria, 2 calibrated evaluators examined the performance of the restorations at baseline, 6, 12, 18, 24, and 36 months. The Kaplan-Meier method and the log-rank test were adopted to analyze the survival rate. The influence of potential risk factors on the main pattern of failure was studied by univariate Cox regression analysis (alpha=0.05). RESULTS At the 3-year followup, the survival rate of the partial crowns was 83.1% in the RNC group, and 93.5% in the LDGC group (P=0.061). Failures were caused by debonding (66.7%), restoration fracture (26.6%), and tooth fracture (6.7%). No significant differences were found between the 2 materials at 36 months, except for the parameters of "surface luster" (P=0.002) and "occlusal contour and wear" (P=0.009). The RNC group was significantly more likely to debond than the LDGC group (hazard ratio=9.22 [1.17,72.74], P=0.01). CONCLUSIONS RNC CAD/CAM-fabricated partial crowns are a potential clinical alternative for endodontically treated posterior teeth, with a survival rate of 83.1% at the 3-year followup. The main pattern of failure was debonding, which might be influenced by surface pretreatment of the RNC material.

Low-Cost and Convenient Microchannel Resistance Biosensing Platform by Directly Translating Biorecognition into a Current Signal.

We report a low-cost and convenient microchannel resistance (MCR) biosensing platform that uses current signal to report biorecognition. The biorecognition behavior between targets and biometric molecules (antigens, antibodies, or oligonucleotides) immobilized on magnetic beads and polystyrene (PS) microspheres induces a quantitative change in the unreacted PS microspheres. After magnetic separation, the unreacted PS microsphere solution is passed through the microchannel, leading to an obvious blocking effect, resulting in an increase in resistance, which can in turn be measured by monitoring the electric current. Thus, the biorecognition is directly converted into a detectable current signal without any bulky instruments or additional chemical reactions. The MCR biosensing platform is cost-effective and user-friendly with high accuracy. It can be an appropriate analysis technique for point-of-care testing in resource-poor settings.

Efficient ∼4 µm emission from Pr3+/Yb3+ co-doped fluoroindate glass.

Pr3+/Yb3+ co-doped fluoroindate (InF3) glasses were prepared by using a traditional melt-quenching method in dry N2 atmosphere. Pumped by a 976 or 1570 nm laser diode, efficient emissions at ∼4µm were obtained from the Pr3+/Yb3+ co-doped glasses, which could be ascribed to the transition 3F4→3H6 of Pr3+ ions. The relative stimulated emission cross section was calculated to be ∼1.44×10-24m2 at 4 µm, which was ∼4.2 times larger than that of transition Ho3+:5I5→5I6 (3.4×10-25m2). In addition, combined with transitions 1G4→3F3 and 1G4→3F4 of Pr3+ ions, ultra-broadband emission ranging from 2.7 to 4.2 µm was also obtained. Our results indicate that Pr3+/Yb3+:InF3 glasses could be used to develop efficient ∼4µm lasers and widely tunable mid-infrared lasers.

Intense emission at ∼3.3 µm from Er3+-doped fluoroindate glass fiber.

Fluoroindate glass fibers with an Er3+ doping concentration of ∼0.5mol% were fabricated by using a rod-in-tube method. Pumped by a 976 nm laser diode, intense emission at ∼3.3µm was obtained from a 40 cm long Er3+-doped fiber, which could be attributed to the transition 4S3/2→4F9/2 of Er3+ ions. The calculated emission cross section at ∼3.3µm was ∼3×10-26m2, which was ∼1.5 times larger than that of transitions Er3+:4F9/2→4I9/2 and Dy3+:6H13/2→6H15/2. In addition, broad emissions ranging from 3.1 µm to 3.85 µm were obtained in the Er3+-doped fiber under a 976 nm/1973 nm dual-wavelength pumping scheme. Our results indicated that Er3+-doped fluoroindate glass fibers had the potential for constructing efficient ∼3.3µm fiber lasers.

Permanent Maxillary Odontometrics for Sex Estimation Based on a 3-Dimensional Digital Method.

BACKGROUND In the field of forensic medicine, sex estimation is a critical step in personal identification. Teeth are the hardest tissue and have high temperature resistance and corrosion resistance. In cases such as an airplane crash or the corpse of an unknown person, teeth often play a crucial role in identification. This study applied 3-dimensional technology to obtain odontometrics of permanent maxillary teeth and to examine the sexual dimorphism, finding suitable discriminant indicators to construct appropriate equations for sex estimation. MATERIAL AND METHODS A total of 204 participants (104 men and 100 women) from the Han population in Kashgar were included. Plaster models of their maxillary dentition were obtained to scan and measure through an accepted and commonly used 3-dimensional digital method. Descriptive statistics, t tests, and discriminant analyses were statistically analyzed using IBM SPSS 23.0 software. RESULTS This study showed high intra- and interexaminer reliability (intraclass correlation coefficient >0.950). There were statistically significant sex-related differences (P<0.05), with male values generally being higher for buccolingual distance, mesiodistal distance, intercanine distance, crown area, crown module, crown index, and maxillary canine index. Compared with other measurements, mesiodistal distance and crown area indicator exhibited distinct sexual dimorphism. In addition, several appropriate equations were constructed through different discriminant analyses that could be used to estimate sex in our specific population. CONCLUSIONS Three-dimensional digital technology offers a promising method for odontometry. Combining mesiodistal distance and buccolingual distance of particular teeth or using maxillary canine index in discriminant functions are acceptable auxiliary tools for sex estimation in the forensic field.

Ultrasensitive determination of organotin compounds in plastic food packaging and edible oils by sheathless capillary electrophoresis-electrospray ionization-mass spectrometry.

The determination of trace-amount organotins in plastic food packaging materials is of great significance in food safety. However, due to the complexity of organotins and sample treatment processes, it is still a challenging task. Here, we report a method for the sensitive and simultaneous determination of organotins in plastic food packaging materials and edible oils, by utilizing sheathless capillary electrophoresis-electrospray ionization-mass spectrometry. The method of sample pretreatment with ultrasonic extraction and solid phase extraction is used to eliminate interference. The results showed low limits of detection (LODs) of 2 pg mL-1-50 pg mL-1 and excellent inter/intra-day repeatability. Good average recoveries in the range of 80.27% to 108.52% were obtained at three spiked concentrations, with a relative standard deviation less than 8.71%. The successful simultaneous determination of the target analytes will pave the way for further assessment of contamination and migration behaviour of organotins from packaging materials to food, which is of great significance for evaluating and controlling food safety.

Spleen-yang-deficiency patients with polycystic ovary syndrome have higher levels of visfatin.

OBJECTIVE: To study serum visfatin levels in women with polycystic ovary syndrome (PCOS) grouped by Traditional Chinese Medicine (TCM) patterns. To study the correlations of serum visfatin levels with homeostatic model assessment insulin resistance (HOMA-IR), fasting plasma glucose (FPG), fasting insulin (FINS), body mass index (BMI), testosterone (T), total cholesterol (TC), and triglycerides (TG). METHODS: Two hundred and twelve PCOS patients were placed into the following TCM pattern subgroups: Kidney-Yang deficiency (KYD) group, Spleen-Yang deficiency (SYD) group, stagnant Liver-Qi transforming into heat (SLQTH) group, and Kidney-Yin deficiency (KYIND) group. The correlations between serum visfatin levels and HOMA-IR, FPG, FINS, BMI, T, TC, and TG were analyzed. RESULTS: Of all patients with PCOS, there were 82 in the KYD group (38.6%), 67 in the SYD group (31.6%), 37 in the SLQTH group (17.5%), and 26 in the KYIND group (12.3%). Visfatin levels in all PCOS subgroups were higher than those in the control group (P < 0.01 or P < 0.05). Among these subgroups, the visfatin levels in the SYD group were significantly higher than those in the other three TCM pattern groups (P < 0.05). There were no statistical differences among the remaining three pattern groups. The levels of BMI, FINS, HOMA-IR, T, and TG were significantly higher in all subgroups than those in the control group (P < 0.05). There were no significant differences in FPG and TC between all PCOS subgroups and the control group (P > 0.05). The SYD group had higher levels of FINS and HOMA-IR compared with the KYD, SLQTH, and KYIND groups (P < 0.05). In all subgroups, after controlling for BMI, TG, TC, and age, visfatin was positively correlated with FINS (r = 0.197, P = 0.015) and HOMA-IR (r = 0.173, P = 0.033), and was not correlated with T. CONCLUSION: KYD and SYD patterns are most common in PCOS patients. Increased visfatin is a common pathophysiologic manifestation in PCOS patients. The SYD group had the highest levels of visfatin, and visfatin was positively correlated with FINS and HOMA-IR.

Graphene/hydroxyapatite coating deposit on titanium alloys for implant application.

Titanium (Ti) implants are widely used in medicine. Meanwhile, surface modification of Ti can strengthen the osseointegration of implants. In this study, we modified Ti implant surfaces, which was coated with GO, HA, HA-2wt%GO and HA-5wt%GO via electrophoresis deposition, to investigate their mechanisms and biological activity. Uncoated Ti was used as the control. Further, we examined the biological behavior and osteogenic performance of mouse bone marrow mesenchymal stem cells (BMSCs) cultured on coatings in vitro. We found that the HA-GO nanocomposite coating improved the roughness and hydrophilicity of the Ti surface. Compared with the uncoated Ti or Ti modified by HA or GO alone, cell adhesion and diffusion were enhanced on HA-GO-modified Ti surfaces. In addition, the proliferation and osteogenic differentiation of BMSCs in vitro were significantly improved on HA-GO-modified surfaces, whereas osteogenesis-related gene expression and alkaline phosphatase activity were slightly enhanced. Furthermore, we noted that bone regeneration was improved in the HA-2wt%GO group in vivo. Thus, the HA-2wt%GO nanocomposite coating might have potential applications in the field of dental implants.

Superaerophobic copper-based nanowires array for efficient nitrogen reduction.

Electrocatalytic N2 reduction reaction (NRR) provides a promising route for NH3 production under ambient conditions to replace traditional Haber-Bosch process. For this purpose, efficient NRR electrocatalysts with high NH3 yield rate and high Faradaic efficiency (FE) are required. Cu-based materials have been recognized catalytic active for some multi-electron-involved reduction reactions and usually exhibit inferior catalytic activities for hydrogen evolution reaction. We report here the preparation and characterization of a series of Cu-based nanowires array (NA) catalysts in situ grown on Cu foam (CF) substrate, including Cu(OH)2 NA/CF, Cu3N NA/CF, Cu3P NA/CF, CuO NA/CF and Cu NA/CF, which are directly used as self-supported catalytic electrodes for NRR. The electrochemical results show that CuO NA/CF achieves a highest NH3 yield rate of 1.84 × 10-9 mol s-1 cm-2, whereas Cu NA/CF possesses a highest FE of 18.2% for NH3 production at -0.1 V versus reversible hydrogen electrode in 0.1 M Na2SO4. Such catalytic performances are superior to most of recently reported metal-based NRR electrocatalysts. The contact angle measurements and the simulated calculations are carried out to reveal the important role of the superaerophobic NA surface structure for efficient NRR electrocatalysis.

Borderline Developmental Dysplasia of the Hip: A Risk Factor Predicting the Development and Poor Prognosis after Core Decompression for Idiopathic Osteonecrosis of the Femoral Head.

OBJECTIVE: It is unclear whether idiopathic osteonecrosis of the femoral head (ONFH) is associated with borderline developmental dysplasia of the hip (BDDH). This study aimed to compare the incidence of BDDH between patients with idiopathic ONFH and matched control subjects and determine the influence of BDDH on poor prognosis after core decompression (CD). METHODS: We retrospectively examined 78 consecutive patients (111 hips) with idiopathic ONFH undergoing CD and 1:2 matched with 156 control subjects (222 hips). The anteroposterior pelvic radiographs were used to measure the acetabular anatomical parameters and divide included subjects into BDDH or non-BDDH group. The incidence of BDDH and acetabular anatomical parameters were compared between patients with idiopathic ONFH and matched controls. Clinical outcomes, such as Harris Hip Score (HHS), progression of collapse, and conversion to total hip arthroplasty (THA), were compared between patients with BDDH and without BDDH in the idiopathic ONFH group, with a mean follow-up of 72.1 ± 36.6 months. RESULTS: Patients with idiopathic ONFH had a significantly higher incidence of BDDH than matched controls (29.7% vs 12.2%, p < 0.001). Less acetabular coverage was also found in patients with idiopathic ONFH than in matched controls as demonstrated by lower CEA (28.5° ± 4.7° vs 33.1° ± 5.7°, p < 0.001), AHI (82.4 ± 5.0 vs 86.3 ± 5.4, p < 0.001), ADR (299.6 ± 28.4 vs 318.8 ± 31.3, p < 0.001), and a higher sharp angle (40.0° ± 3.4° vs 37.4° ± 3.7°, p < 0.001). In patients with idiopathic ONFH, the BDDH group had a significantly lower mean HHS at the last follow-up (83.5 ± 17.4 vs 91.6 ± 9.7, p = 0.015) with a different score distribution (p = 0.004), and a lower 5-year survival rate with both clinical failure (66.7%, 95% CI 52.4%-84.9% vs 83.7%, 95% CI 75.2%-93.1%; p = 0.028) and conversion to THA (74.6%, 95% CI 60.7%-91.6% vs 92.1%, 95% CI 85.6%-99.0%; p = 0.008) as the endpoints than the non-BDDH group. CONCLUSION: The incidence of BDDH was significantly higher in patients with idiopathic ONFH than matched controls, and idiopathic ONFH patients who underwent CD with BDDH had lower mean HHS as well as 5-year survival rate than those without BDDH. Therefore, BDDH should be considered a risk factor predicting the development of idiopathic ONFH as well as poor prognosis after CD.

Bacteriostatic effects of nanometer silver disinfectant on the biofilms in dental unit water lines.

BACKGROUND/PURPOSE: Dental unit water lines (DUWLs) may be contaminated by aerobic bacteria in clinical settings and comprehensive disinfecting methods should be considered without delay. Herein, this study aims to investigate the timeliness and dynamic bacteriostatic effects of different forms of nanometer silver (NMS) disinfectant on bio-film in DUWLs. MATERIALS AND METHODS: Bacterial DUWLs samples were respectively treated with different NMS forms, including liquid phase and solid phase at the concentrations of 0.25%, 0.5%, 1% and 2% and their bacteriostatic effects were observed at the 1st, 4th, 7th, 14th, 28th day. RESULTS: The bacteriostatic effects of liquid phase NMS at all concentrations were unsatisfactory and the bacteriostatic rate was only 20% at the 1st day. However, there appeared massive bacteria growth at the 4th, 7th, 14th, 28th day. Comparatively, no bacteria growth was found at the 1st, 4th, 7th, 14th, 28th day after sterilizing with different concentrations of solid phase NMS and the bacteriostatic rate was 100%. CONCLUSION: Microbial contamination in DUWLs can be disinfected by different NMS forms, among which solid phase NMS is more bactericidal against bacteria bio-films, demonstrating significant roles of solid phase NMS in preventing DUWL contamination.

Food Safety in Post-COVID-19 Pandemic: Challenges and Countermeasures.

Understanding food safety hazard risks is essential to avoid potential negative heath impacts in the food supply chain in a post-COVID-19 pandemic era. Development of strategies for virus direction in foods plays an important role in food safety and verification. Early warning, tracing, and detection should be implemented as an integrated system in order to mitigate thecoronavirus disease 2019 (COVID-19) outbreak, in which the detection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is critical as it not only concerns screening of populations but also monitoring of possible contaminated sources such as the food supply chain. In this review, we point out the consequences in different aspects of our daily life in the post-COVID-19 pandemic from the perspective of the food supply chain and the food industry. We summarize the possible transmission routes of COVID-19 in the food supply chain before exploring the development of corresponding detection tools of SARS-CoV-2. Accordingly, we compare different detection methods for the virus in foods, including different pretreatments of food matrices in the virus detection. Finally, the future perspectives are proposed.

Dental measurements based on a three-dimensional digital technique: A comparative study on reliability and validity.

OBJECTIVE: In orthodontics and prosthodontics fields, it is often necessary to measure the crown dimensions of patient's teeth for further diagnosis and treatment. This study aims to assess the reliability and validity of dental measurements by comparing three-dimensional (3D) measurement of digital model derived from 3D handheld scanner with electronic digital caliper measurement of plaster model, providing a promising technology for dentistry. DESIGN: The mesiodistal diameter, buccolingual diameter and clinical crown height of 2800 teeth were measured on 100 sets of maxillary and mandibular dental plaster models as well as on the corresponding 3D digital models obtained by structured light scanning of the plaster models. Each measurement was performed twice by qualified operators and averaged. Twenty sets of maxillary and mandibular dentition models were randomly selected for intra and inter observer errors. The reliability was evaluated by intraclass correlation coefficient (ICC). Bland-Altman analysis was utilized to evaluate the validity of methods. RESULTS: Excellent reliability (ICC > 0.75) of intra and inter observer on traditional and digital methods were exhibited. Bland-Altman analysis showed the largest difference was the mesiodistal diameter (170/2800), and the smallest (130/2800) was the clinical crown height. Compared with other teeth, buccolingual diameter of incisors and molars, mesiodistal diameter and clinical crown height of premolars and molars displayed relative differences. The mean biases were close to zero, upper and lower 95 % limits of agreement were within 0.5 mm. CONCLUSIONS: Linear measurements obtained from 3D technique are consistent with the conventional method. The 3D technology can be clinically accepted and suitable for dental metrology.

Quantitative control of noise in mammalian gene expression by dynamic histone regulation.

Fluctuation ('noise') in gene expression is critical for mammalian cellular processes. Numerous mechanisms contribute to its origins, yet the mechanisms behind large fluctuations that are induced by single transcriptional activators remain elusive. Here, we probed putative mechanisms by studying the dynamic regulation of transcriptional activator binding, histone regulator inhibitors, chromatin accessibility, and levels of mRNAs and proteins in single cells. Using a light-induced expression system, we showed that the transcriptional activator could form an interplay with dual functional co-activator/histone acetyltransferases CBP/p300. This interplay resulted in substantial heterogeneity in H3K27ac, chromatin accessibility, and transcription. Simultaneous attenuation of CBP/p300 and HDAC4/5 reduced heterogeneity in the expression of endogenous genes, suggesting that this mechanism is universal. We further found that the noise was reduced by pulse-wide modulation of transcriptional activator binding possibly as a result of alternating the epigenetic states. Our findings suggest a mechanism for the modulation of noise in synthetic and endogenous gene expression systems.

Sensitive detection of benzophenone-type ultraviolet filters in plastic food packaging materials by sheathless capillary electrophoresis-electrospray ionization-tandem mass spectrometry.

While they are commonly used as ultraviolet (UV) filters in plastic food packaging materials, benzophenones (BPs) are reported as environmental endocrine disruptors, and some of them possess significant estrogenic activity. Therefore sensitive determination of the content of those UV filters in plastic polymers is of vital importance in safety assessment of food packaging materials. Here, the sheathless capillary electrophoresis-electrospray ionization-tandem mass spectrometry (CE-ESI-MS/MS) method is applied for the first time to sensitively detect BP-type UV filters in plastic food packaging materials. We investigate and optimize a variety of factors that may affect ESI-MS efficiency and CE separation. Sensitive detection of six BP-type UV filters is achieved using sheathless CE-ESI-MS/MS in conjunction with accelerated solvent extraction and solid phase extraction, with the limit-of-detection of 7 pg/mL-2.4 ng/mL. The method exhibits excellent inter/intra-day repeatability along with the advantages of efficient separation, rapid analysis, low sample consumption and high sensitivity. Six BP-type UV filters in eight different brands of plastic films obtained from supermarkets are successfully analyzed using the method. Good recoveries of 81.3-104.1% at three levels of spiked concentrations are achieved with low RSDs (n = 5) of 2.5-8.7%. Our study shows that the sheathless CE-ESI-MS/MS is a robust and reliable method for sensitive and rapid analysis of UV filters, which would be of potential application in safety assessment of plastic food packaging materials.

[The ideneification of liver immune-related genes in obese mice induced by long-term high-fat diet].

Objective To investigate the expression levels of hepatic immune-related genes in C57BL/6J mice treated by high-fat diet. Methods Male C57BL/6J mice were treated by high-fat diet for 16 and 38 weeks, and the control group were given normal diet. The body mass and blood glucose levels were measured, and the liver slices were checked by HE staining. Hepatic RNA was extracted and sequenced by a Beijing Genomics Institute (BGI) BGISEQ-500 Sequencing Platform. Original sequence data were aligned and annotated referring to UCSC GRCm38/mm10 mouse genome. Volcano plots were used to profile the mRNA expression data matrix and find out the most significantly regulated hepatic immune-related genes. Real-time PCR was performed to validate the changes of selected genes. Results High-fat diet significantly increased mouse body mass and blood glucose levels, and HE staining showed the accumulation of lipid in the livers of mice treated by high-fat diet. Volcano plots of transcriptome data showed that, high-fat diet significantly changed the expression levels of 157 out of 795 hepatic immune-related genes at week 16. At week 38, 235 genes were significantly changed, and most genes showed an up-regulation trend. Among those significantly changed genes, six genes were selected to validate the data with a real-time PCR technology. At week 16, the gene expression levels of CD36 and PR domain containing 1 (PRDM1) significantly increased, and CD276 significantly decreased. At week 38, the gene expression levels of chemokine CXC motif ligand 1 (CXCL1), CD40 and formyl peptode receptor 1 (FPR1) were significantly raised. The real-time PCR data were generally in line with the trend of transcriptomic data. Conclusion Long-term treatment with high-fat diet significantly changes the gene expression levels of mouse hepatic immune-related genes.