RESUMO
This study aims to explore the role of lncRNA MSC-AS1/microRNA-140-5p/BMP2 regulatory loop in promoting osteogenic differentiation of BMSCs. BMSCs were isolated from bone marrow of mice. Expression levels of MSC-AS1, microRNA-140-5p and BMP2 during osteogenic differentiation were detected by qRT-PCR. Meanwhile, regulatory effect of MSC-AS1 on osteogenic differentiation was detected through ALP staining and alizarin red staining. The binding sites between microRNA-140-5p and MSC-AS1 as well as between microRNA-140-5p and BMP2 were predicted by TargetScan, which were further confirmed by dual-luciferase reporter gene assay. In addition, protein levels of MSC-AS1/microRNA-140-5p/BMP2 were detected by Western blot. Finally, rescue experiments were conducted to clarify the regulatory effects of MSC-AS1/microRNA-140-5p/BMP2 axis on osteogenic differentiation. MSC-AS1 and BMP2 were found to be remarkably up-regulated during osteogenic differentiation, while microRNA-140-5p was conversely down-regulated. Meanwhile, knockdown of MSC-AS down-regulated expression levels of osteogenesis-associated genes and weakened the mineralization capacity of BMSCs. MicroRNA-140-5p was verified to bind to the 3'UTR of MSC-AS1 and BMP2 genes. Knockdown of MSC-AS1 in BMSCs could reduce the expression of microRNA-140-5p, while knockdown of microRNA-140-5p also down-regulated BMP2 level. In addition, co-silence of MSC-AS1 and microRNA-140-5p reversed the inhibitory effect of MSC-AS1 knockdown on osteogenic differentiation and protein levels of p-Smad1/5/8, RUNX2 and Osterix. MSC-AS1 might promote the osteogenic differentiation of BMSCs through sponging microRNA-140-5p to up-regulate BMP2, thus alleviating the progression of osteoporosis.
Assuntos
Proteína Morfogenética Óssea 2/metabolismo , MicroRNAs/metabolismo , Osteogênese , Osteoporose/metabolismo , RNA Longo não Codificante/metabolismo , Regulação para Cima , Células Cultivadas , Humanos , Osteoporose/genética , Osteoporose/patologiaRESUMO
A novel approach to recycling of copper and aluminum fragments in the crushed products of spent lithium iron phosphate batteries was proposed to achieve their eco-friendly processing. The model of pneumatic separation that determines the optimal airflow velocity was established using aerodynamics. The influence of the airflow velocity, and the density and thickness, and their ratios, of the aluminum and copper fragments on pneumatic separation were evaluated. The results show that the optimal airflow velocities of copper and aluminum fragments with and without the electrode materials are 3.27m/s and 1.67m/s, respectively. The accuracy and reliability of the present model was verified using a pneumatic separation experiment. It is concluded that graded pneumatic separation is unnecessary for the crushed particle size more than 9 mm. The experimentally determined optimal airflow velocity of the copper and aluminum fragments with and without the electrode materials is 3.3m/s and 1.7m/s, respectively. The mass fractions of the copper and aluminum fragments upon removal of the electrode materials after pneumatic separation are 97% and 96%, respectively, and both with the electrode material achieve 97.0%. The theoretically obtained optimal airflow velocities have good agreements with the experimentally obtained ones.
Assuntos
Lítio , Reciclagem , Fontes de Energia Elétrica , Eletrodos , Ferro , Fosfatos , Reprodutibilidade dos TestesRESUMO
The recycling processes of spent lithium iron phosphate batteries comprise thermal, wet, and biological and mechanical treatments. Limited research has been conducted on the combined mechanical process recycling technology and such works are limited to the separation of metal and non-metal materials, which belongs to mechanical recovery. In this article the combined mechanical process recycling technology of spent lithium iron phosphate batteries and the separation of metals has been investigated. The spent lithium iron phosphate batteries monomer with the completely discharged electrolyte was subjected to perforation discharge. The shell was directly recycled and the inner core was directly separated into a positive electrode piece, dissepiment, and negative electrode piece. The dissociation rate of the positive and negative materials reached 100.0% after crushing when the temperature and time reached 300 °C and 120 min. The crushed products were collected and sequentially sieved after the low-temperature thermal treatment. Then, nonferrous metals (copper and aluminium) were separated from the crushed spent lithium iron phosphate batteries by eddy current separation with particle size -4 + 0.4. The optimised operation parameters of eddy current separation were fed at speeds of 40 r min-1, and the rotation speed of the magnetic field was 800 r min-1. The nonferrous metals of copper and aluminium were separated by the method of pneumatic separation. The optimal air speed was 0.34 m s-1 for the particle-size -1.6 + 0.4 mm and 12.85-14.23 m s-1 for the particle-size -4 + 1.6 mm. The present recycling process is eco-friendly and highly efficient and produces little waste.
Assuntos
Alumínio , Lítio , Cobre , Fontes de Energia Elétrica , Ferro , Fenômenos Mecânicos , Fosfatos , ReciclagemRESUMO
Baicalein is a new drug that has shown promising anti-cancer effects against a broad spectrum of tumors. However, the potential effect on osteosarcoma cells and the mechanisms involved are still largely unknown. Resistance to chemotherapy remains a major obstacle in cancer therapy. Therefore, the aim of the present study was to investigate the anti-tumor effect of baicalein on human osteosarcoma cancer cells and the molecular mechanism involved, as well as identify possible mechanisms of drug resistance. Our results revealed that baicalein-induced apoptosis in osteosarcoma cells was via a mitochondrial pathway involving both caspase-dependent and independent mechanisms. Notably, baicalein treatment upregulated the expression of HSP70, which partially prevented human osteosarcoma cells from undergoing apoptosis. Moreover, it was revealed that HSP70 expression decreased the sensitivity of osteosarcoma cells to baicalein via activation of PI3K/AKT and MAPK/ERK pathways. These results suggest that targeting HSP70-mediated drug resistance, in combination with chemotherapy drugs, may provide novel therapeutic opportunities.
Assuntos
Antineoplásicos/farmacologia , Apoptose/efeitos dos fármacos , Neoplasias Ósseas/patologia , Flavanonas/metabolismo , Proteínas de Choque Térmico HSP70/metabolismo , Osteossarcoma/metabolismo , Caspases/metabolismo , Linhagem Celular Tumoral/efeitos dos fármacos , Resistencia a Medicamentos Antineoplásicos , Flavanonas/farmacologia , Proteínas de Choque Térmico HSP70/genética , Humanos , Mitocôndrias/metabolismo , Osteossarcoma/patologia , Espécies Reativas de Oxigênio/metabolismo , Transdução de Sinais/efeitos dos fármacosRESUMO
Wnt5a is classified as a non-transforming Wnt family member and plays complicated roles in oncogenesis and cancer metastasis. However, Wnt5a signaling in osteosarcoma progression remains poorly defined. In this study, we found that Wnt5a stimulated the migration of human osteosarcoma cells (MG-63), with the maximal effect at 100 ng/ml, via enhancing phosphorylation of phosphatidylinositol-3 kinase (PI3K)/Akt. PI3K and Akt showed visible signs of basal phosphorylation and elevated phosphorylation at 15 min after stimulation with Wnt5a. Pharmaceutical inhibition of PI3K with LY294002 significantly blocked the Wnt5a-induced activation of Akt (p-Ser473) and decreased Wnt5a-induced cell migration. Akt siRNA remarkably inhibited Wnt5a-induced cell migration. Additionally, Wnt5a does not alter the total expression and phosphorylation of ß-catenin in MG-63 cells. Taken together, we demonstrated for the first time that Wnt5a promoted osteosarcoma cell migration via the PI3K/Akt signaling pathway. These findings could provide a rationale for designing new therapy targeting osteosarcoma metastasis.
RESUMO
Poly (methyl methacrylate) (PMMA) bone cement is an excellent biological material for anchoring joint replacements. Tensile strength ft and fracture toughness KIC have a considerable impact on its application and service life. Considering the variability of PMMA bone cement, a three-parameter Weibull distribution method is suggested in the current study to evaluate its tensile strength and fracture toughness distribution. The coefficients of variation for tensile strength and fracture toughness were the minimum when the characteristic crack of PMMA bone cement was αch∗=8dav. Using the simple equation αch∗=8dav and fictitious crack length Δαfic=1.0dav, the mean value µ (= 43.23 MPa), minimum value ftmin (= 26.29 MPa), standard deviation σ (= 6.42 MPa) of tensile strength, and these values of fracture toughness (µ = 1.77 MPaâ m1/2, KICmin = 1.02 MPaâ m1/2, σ = 0.2644 MPaâ m1/2) were determined simultaneously through experimental data from a wedge splitting test. Based on the statistical analysis, the prediction line between peak load Pmax and equivalent area Ae1Ae2 was obtained with 95% reliability. Nearly all experimental data are located within the scope of a 95% confidence interval. Furthermore, relationships were established between tensile strength, fracture toughness, and peak load Pmax. Consequently, it was revealed that peak load might be used to easily obtain PMMA bone cement fracture characteristics. Finally, the critical geometric dimension value of the PMMA bone cement sample with a linear elastic fracture was estimated.
RESUMO
Radial styloid stenosing tenosynovitis is a kind of common chronic motor system injuries, and could lead to joint pain and aggravates with activity, in further makes a great impact on people's daily life. At present, therapeutic methods for this disease could divid into conservative treatment and surgical treatment. What we pay attention to is cure. Conservative treatment could effectively relieve pain and improve wrist motion in acute phase, however, it make little difference on long--term effect and usually cause to reappear. Surgical treatment, as a kind of invasive therapies, is chosen only when facing recalcitrant radial styloid stenosing tenosynovitis with many complications for its high cure rate. The author thought that patient education should play an important role in the therapy of radial styloid stenosing tenosynovitis, comprehensive treatment could be applied according to the different conditions of disease development, and could increase cure disease.
Assuntos
Encarceramento do Tendão , Tenossinovite , Humanos , Rádio (Anatomia) , Encarceramento do Tendão/diagnóstico , Encarceramento do Tendão/terapia , Tenossinovite/terapia , Punho , Articulação do PunhoRESUMO
A new strategy to fabricate CoNx single cluster supported nanocarbon catalysts (C/P/2Co600) with enhanced atomic utilization towards the oxygen reduction reaction (ORR) is reported. N-Coordination protection and low-temperature pyrolysis are the two key factors for the formation of CoNx single clusters on nanocarbon supports. Morphological and structural identification confirmed the simultaneous anchoring of homo-dispersed CoNx single clusters and N-doping on the nanocarbon under relatively mild thermal treatment conditions. Expectedly, the obtained single cluster catalyst with a trace amount of metal atoms exhibited excellent ORR performance including a positive half-wave potential (0.846 V), a high mass activity (0.98 A mgCo-1, ampere per milligram of cobalt) and outstanding chemical durability after 8000 potential cycles. We believe that our findings provide a new route for the rational design of low-cost and highly active ORR catalytic materials.
RESUMO
A facile one-step strategy for anchoring defective CoNx single clusters on partly reduced graphene oxide (RGO) is constructed to significantly improve the catalytic performance of non-noble metal complexes toward oxygen reduction reaction (ORR). Sequent loading with trace amounts of metal-free porphyrin and Co2+ in RGO can dramatically enhance both the half-wave potential and the peak current density. Intriguingly, the RGO/P/2Co single cluster exhibits the best ORR catalytic performance with the half-wave potential of 0.834 V, extremely approaching that of commercial Pt/C (0.836 V). This half-wave potential surpasses most of the reported half-wave potentials of RGO supported non-noble metal ORR catalysts through low-temperature synthesis. Furthermore, the as-prepared RGO/P/2Co delivers a peak current density of 1.3 times higher than that of Pt/C at the same loading, together with a high mass activity of 2.76 A mgCo-1. During the durability test, a cathodic current loss less than 10% is recorded after 8000 continuous potential cycles. Insights into this successful example will be conducive to the development of elegant routes for constructing metal nitrogen (MN)-based ORR catalysts with high efficiency, outstanding stability, and excellent selectivity.
RESUMO
We previously found that oxygen-glucose-serum deprivation/restoration (OGSD/R) induces apoptosis of spinal cord astrocytes, possibly via caspase-12 and the integrated stress response, which involves protein kinase R-like endoplasmic reticulum kinase (PERK), eukaryotic initiation factor 2-alpha (eIF2α) and activating transcription factor 4 (ATF4). We hypothesized that edaravone, a low molecular weight, lipophilic free radical scavenger, would reduce OGSD/R-induced apoptosis of spinal cord astrocytes. To test this, we established primary cultures of rat astrocytes, and exposed them to 8 hours/6 hours of OGSD/R with or without edaravone (0.1, 1, 10, 100 µM) treatment. We found that 100 µM of edaravone significantly suppressed astrocyte apoptosis and inhibited the release of reactive oxygen species. It also inhibited the activation of caspase-12 and caspase-3, and reduced the expression of homologous CCAAT/enhancer binding protein, phosphorylated (p)-PERK, p-eIF2α, and ATF4. These results point to a new use of an established drug in the prevention of OGSD/R-mediated spinal cord astrocyte apoptosis via the integrated stress response.