The 3T3 neutral red uptake phototoxicity test: practical experience and implications for phototoxicity testing--the report of an ECVAM-EFPIA workshop.

This is the report from the "ECVAM-EFPIA workshop on 3T3 NRU Phototoxicity Test: Practical Experience and Implications for Phototoxicity Testing", jointly organized by ECVAM and EFPIA and held on the 25-27 October 2010 in Somma Lombardo, Italy. The European Centre for the Validation of Alternative Methods (ECVAM) was established in 1991 within the European Commission Joint Research, based on a Communication from the European Commission (1991). The main objective of ECVAM is to promote the scientific and regulatory acceptance of alternative methods which are of importance to the biosciences and which reduce, refine and replace the use of laboratory animals. The European Federation of Pharmaceuticals Industries and Association (EFPIA) represent the pharmaceutical industry operating in Europe. Through its direct membership of 31 national associations and 40 leading pharmaceutical companies, EFPIA is the voice on the EU scene of 2200 companies committed to researching, developing and bringing to patients new medicines that improve health and the quality of life around the world. The workshop, co-chaired by Joachim Kreysa (ECVAM) and Phil Wilcox (GSK, EFPIA) involved thirty-five experts from academia, regulatory authorities and industry, invited to contribute with their experiences in the field of phototoxicology. The main objectives of the workshop were: -to present 'in use' experience of the pharmaceutical industry with the 3T3 Neutral Red Uptake Phototoxicity Test (3T3 NRU-PT), -to discuss why it differs from the results in the original validation exercise, -to discuss technical issues and consider ways to improve the usability of the 3T3 NRU-PT for (non-topical) pharmaceuticals, e.g., by modifying the threshold of chemical light absorption to trigger photo-toxicological testing, and by modifying technical aspects of the assay, or adjusting the criteria used to classify a positive response. During the workshop, the assay methodology was reviewed by comparing the OECD Test Guideline (TG 432) with the protocols used in testing laboratories, data from EFPIA and JPMA 'surveys' were presented and possible reasons for the outcomes were discussed. Experts from cosmetics and pharmaceutical industries reported on their experience with the 3T3 NRU-PT and evidence was presented for phototoxic clinical symptoms that could be linked to certain relevant molecules. Brainstorming sessions discussed if the 3T3 NRU-PT needed to be improved and whether alternatives to the 3T3 NRU-PT exist. Finally, the viewpoint from EU and US regulators was presented. In the final session, the conclusions of the meeting were summarized, with action points. It was concluded that the 3T3 NRU-PT identifies phototoxicological hazards with a 100% sensitivity, and thus is accepted as the tier one test that correctly identifies the absence of phototoxic potential. Consequently, positive results in the 3T3 NRU-PT often do not translate into a clinical phototoxicity risk. Possible ways to improve the practical use of this assay include: (i) adaptation of changed UV/vis-absorption criteria as a means to reduce the number of materials tested, (ii) reduction of the highest concentration to be tested, and (iii) consideration of modifying the threshold criteria for the prediction of a positive call in the test.

Report of the EPAA-ECVAM workshop on the validation of Integrated Testing Strategies (ITS).

The use of Integrated Testing Strategies (ITS) permits the combination of diverse types of chemical and toxicological data for the purposes of hazard identification and characterisation. In November 2008, the European Partnership for Alternative Approaches to Animal Testing (EPAA), together with the European Centre for the Validation of Alternative Methods (ECVAM), held a workshop on Overcoming Barriers to Validation of Non-animal Partial Replacement Methods/Integrated Testing Strategies, in Ispra, Italy, to discuss the extent to which current ECVAM approaches to validation can be used to evaluate partial replacement in vitro test methods (i.e. as potential ITS components) and ITS themselves. The main conclusions of these discussions were that formal validation was only considered necessary for regulatory purposes (e.g. the replacement of a test guideline), and that current ECVAM approaches to validation should be adapted to accommodate such test methods. With these conclusions in mind, a follow-up EPAA-ECVAM workshop was held in October 2009, to discuss the extent to which existing validation principles are applicable to the validation of ITS test methods, and to develop a draft approach for the validation of such test methods and/or overall ITS for regulatory purposes. This report summarises the workshop discussions that started with a review of the current validation methodologies and the presentation of two case studies (skin sensitisation and acute toxicity), before covering the definition of ITS and their components, including their validation and regulatory acceptance. The following main conclusions/recommendations were made: that the validation of a partial replacement test method (for application as part of a testing strategy) should be differentiated from the validation of an in vitro test method for application as a stand-alone replacement, especially with regard to its predictive capacity; that, in the former case, the predictive capacity of the whole testing strategy (rather than of the individual test methods) would be more important, especially if the individual test methods had a high biological relevance; that ITS allowing for flexible and ad hoc approaches cannot be validated, whereas the validation of clearly defined ITS would be feasible, although practically quite difficult; and that test method developers should be encouraged to develop and submit to ECVAM not only full replacement test methods, but also partial replacement methods to be placed as parts of testing strategies. The added value from the formal validation of testing strategies, and the requirements needed in view of regulatory acceptance of the data, require further informed discussion within the EPAA forum on the basis of case studies provided by industry.

Exposure of the murine RAW 264.7 macrophage cell line to hydroxyapatite dispersions of various composition and morphology: assessment of cytotoxicity, activation and stress response.

Cellular stress responses leading to the release of cytotoxic mediators are discussed as indicators of the hazard presented by particles, and in particular ultrafine particles or nanomaterials. The present study was designed to investigate effects of the following materials on RAW 264.7 macrophages: three hydroxyapatite materials of various morphologies, i.e., nano-sized with rod-like (HA-NR), plate-like (HA-NP) or needle-shaped (HA-NN) morphology, and an irregularly shaped composite of hydroxyapatite and protein (HPC) in the low micrometer range. Concentrations of 50, 100, 500, 1000 and 5000 microg/ml were applied and cells were analyzed for viability (XTT-test), cytokine production (TNF-alpha) and induction of nitric oxide (NO) after 18 and 42 h. DQ12 quartz and lipopolysaccharide (LPS) served as positive controls. Up to concentrations of 500 microg/ml, cell viability was not considerably impaired by the test samples at both timepoints. Overall, viability was about one order of magnitude higher than with comparable concentrations of quartz. TNF-alpha release was induced in all samples after 18 h, with HA-NR showing the most pronounced induction at 100 microg/ml, still clearly below the LPS signal. No or little induction was observed after 42 h. NO production was low after 18 and 42 h. The results support the conclusion that the tested materials exhibit good biocompatibility and are safe to use.