RESUMO
This work describes a multi-step modification process for the covalent transformation of Kevlar fabric en route to the incorporation of graphene oxide (GO) nanosheets. Spectroscopic, thermal and microscopy imaging techniques have been employed to follow step-by-step the modification of Kevlar and the formation of the corresponding Kevlar-GO hybrid fabric. The level of Kevlar's functionalization can be controlled with the nitration time, the first reaction in the multi-sequence organic transformations, for obtaining the hybrid fabric with a content of GO up to 30 %. Most importantly, the covalent post-modification of Kevlar does not occur in the expense of the other excellent mechanical properties of the fabric. Under optimal conditions, the Kevlar-GO hybrid fabric shows a 20 % enhancement of the ultimate strength. Notably, when the Kevlar-GO hybrid fabric was exposed to cyanobacterial Synechococcus the bacteria growth was fully inhibited. Overall, the covalently modified fabric demonstrated significant antibacterial behavior, excellent strength and stability under common processes. Due to its simplicity, the methodology presented in this work not only promises to result in a standard procedure to functionalize the mer units of Kevlar with a variety of chemicals and nanomaterials but it can be also extended for the modification and hybridization of other fabrics.
Assuntos
Grafite , Nanoestruturas , Grafite/química , Nanoestruturas/química , Antibacterianos/farmacologia , Antibacterianos/químicaRESUMO
The surface modification of fabrics composed of Kevlar®, Nomex®, or VAR was extensively investigated. Kevlar® and Nomex® are widely-utilized aramid materials, whereas VAR is a technical fabric comprising 64% viscose, 24% para-aramid (Kevlar®), 10% polyamide, and 2% antistatic fibers. Both aramid materials and cellulose/viscose exhibit exceptional mechanical properties that render them valuable in a wide range of applications. For the herein studied modification of Kevlar®, Nomex®, and VAR, we used small organic molecules 3-allyl-5,5-dimethylhydantoin (ADMH) and 3-(acrylamidopropyl)trimethylammonium chloride (APTAC), which were anchored onto the materials under study via graft polymerization. By doing so, excellent antibacterial properties were induced in the three studied fabrics. Their water repellency was improved in most cases as well. Extensive characterization studies were conducted to probe the properties of the modified materials, employing Raman and FTIR spectroscopies, Scanning Electron Microscopy (SEM), and thermogravimetric analysis (TGA).
RESUMO
The present work focuses on the surface coating of VAR technical fibers, consisting of 64% viscose (cellulose), 24% Kevlar, 10% other types of polyamides, and 2% antistatic polymers. Kevlar is an aramid material exhibiting excellent mechanical properties, while cellulose is a natural linear polymer composed of repeating ß-d-glucose units, having several applications in the materials industry. Herein, we synthesized novel, tailor-designed organic molecules possessing functional groups able to anchor on VAR fabrics and cellulose materials, thus altering their properties on demand. To this end, we utilized methyl-α-d-glucopyranose as a model compound, both to optimize the reaction conditions, before applying them to the material and to understand the chemical behavior of the material at the molecular level. The efficient coating of the VAR fabric with the tailor-made compounds was then implemented. Thorough characterization studies using Raman and IR spectroscopies as well as SEM imaging and thermogravimetric analysis were also carried out. The wettability and water repellency and antibacterial properties of the modified VAR fabrics were also investigated in detail. To the best of our knowledge, such an approach has not been previously explored, among other factors regarding the understanding of the anchoring mechanism at the molecular level. The proposed modification protocol holds the potential to improve the properties of various cellulose-based materials beyond VAR fabrics.
RESUMO
Oxidized multi-walled carbon nanotubes (oxCNTs) were functionalized by a simple non-covalent modification procedure using quaternized hyperbranched poly(ethyleneimine) derivatives (QPEIs), with various quaternization degrees. Structural characterization of these hybrids using a variety of techniques, revealed the successful and homogenous anchoring of QPEIs on the oxCNTs' surface. Moreover, these hybrids efficiently dispersed in aqueous media, forming dispersions with excellent aqueous stability for over 12 months. Their cytotoxicity effect was investigated on two types of gram(-) bacteria, an autotrophic (cyanobacterium Synechococcus sp. PCC 7942) and a heterotrophic (bacterium Escherichia coli). An enhanced, dose-dependent antibacterial and anti-cyanobacterial activity against both tested organisms was observed, increasing with the quaternization degree. Remarkably, in the photosynthetic bacteria it was shown that the hybrid materials affect their photosynthetic apparatus by selective inhibition of the Photosystem-I electron transport activity. Cytotoxicity studies on a human prostate carcinoma DU145 cell line and 3T3 mouse fibroblasts revealed that all hybrids exhibit high cytocompatibility in the concentration range, in which they also exhibit both high antibacterial and anti-cyanobacterial activity. Thus, QPEI-functionalized oxCNTs can be very attractive candidates as antibacterial and anti-cyanobacterial agents that can be used for potential applications in the disinfection industry, as well as for the control of harmful cyanobacterial blooms.
RESUMO
The chlorophyll a fluorescence based antimicrobial susceptibility testing (AST) method presented in a previous work was based on the measurement of Chl a fluorescence of the gram(-) cyanobacterium Synechococcus sp. PCC 7942. Synechococcus sp. PCC 7942 as a gram(-) bacterium is affected by antibacterial agents via mechanisms affecting all gram(-) bacteria, however, as an exclusively phototrophic organism it would also be affected by photosynthesis inhibitory action of an agent that otherwise has no antibacterial properties. In this report, the method is modified by replacing the exclusively phototrophic Synechococcus sp. PCC 7942 with the Synechocystis sp. PCC 6714, capable of both phototrophic and heterotrophic growth in order to add versatility and better reflect the antibacterial effects of surfaces under study towards nonphotosynthetic bacteria.
Assuntos
Anti-Infecciosos/farmacologia , Clorofila/química , Testes de Sensibilidade Microbiana/métodos , Espectrometria de Fluorescência/métodos , Synechococcus/química , Synechococcus/efeitos dos fármacos , Clorofila/análise , Clorofila A , Microbiologia Ambiental , Fluorescência , Fotossíntese/efeitos dos fármacos , Propriedades de Superfície , Synechococcus/crescimento & desenvolvimento , Synechocystis/química , Synechocystis/efeitos dos fármacos , Synechocystis/crescimento & desenvolvimento , Têxteis/microbiologiaRESUMO
Up to now antimicrobial susceptibility testing (AST) methods are indirect and generally involve the manual counting of bacterial colonies following the extraction of microorganisms from the surface under study and their inoculation in a separate procedure. In this work, an in situ, direct and instrumental method for the evaluation and assessment of antibacterial properties of materials and surfaces is proposed. Instead of indirectly determining antibacterial activity using the typical gram(-) test organisms with the subsequent manual colony count or inhibition zone measurement, the proposed procedure, employs photosynthetic gram(-) cyanobacteria deposited directly onto the surface under study and assesses cell proliferation and viability by a quick, accurate and reproducible instrumental chlorophyll fluorescence spectrophotometric technique. In contrast with existing methods of determination of antibacterial properties, it produces high resolution and quantitative results and is so versatile that it could be used to evaluate the antibacterial properties of any compound (organic, inorganic, natural or man-made) under any experimental conditions, depending on the targeted application.