Refining the mechanism of CO2 and H2 activation over gold-ceria catalysts by IR modulation excitation spectroscopy.

The activation and utilization of the greenhouse gas CO2 is of great interest for the energy transition as a fossil-free carbon source for mitigating climate change. CO2 hydrogenation via the reverse water-gas shift reaction (RWGSR) converts CO2 to CO, a crucial component of syngas, enabling further transformation by means of the Fischer-Tropsch process. In this study, we unravel the detailed mechanism of the RWGSR on low-loaded Au/CeO2 catalysts using IR modulation excitation spectroscopy (MES), by periodically modulating the concentration of the reactants, followed by phase-sensitive detection (PSD). Applying such a MES-PSD approach to Au/CeO2 catalysts during RWGSR gives direct spectroscopic evidence for the active role of gold hydride, bidentate carbonate and hydroxyl species in the reaction mechanism, while disproving the participation of other species such as formate. Our results highlight the potential of modulation excitation spectroscopy combined with phase-sensitive detection to provide new mechanistic insight into catalytic reactions not accessible by steady-state techniques, including a profound understanding of the sequence of reaction steps.

Berezinskii-Kosterlitz-Thouless Transition in the Type-I Weyl Semimetal PtBi2.

Symmetry breaking in topological matter has become in recent years a key concept in condensed matter physics to unveil novel electronic states. In this work, we predict that broken inversion symmetry and strong spin-orbit coupling in trigonal PtBi2 lead to a type-I Weyl semimetal band structure. Transport measurements show an unusually robust low dimensional superconductivity in thin exfoliated flakes up to 126 nm in thickness (with Tc ∼ 275-400 mK), which constitutes the first report and study of unambiguous superconductivity in a type-I Weyl semimetal. Remarkably, a Berezinskii-Kosterlitz-Thouless transition with TBKT ∼ 310 mK is revealed in up to 60 nm thick flakes, which is nearly an order of magnitude thicker than the rare examples of two-dimensional superconductors exhibiting such a transition. This makes PtBi2 an ideal platform to study low dimensional and unconventional superconductivity in topological semimetals.

Spinon Heat Transport in the Three-Dimensional Quantum Magnet PbCuTe_{2}O_{6}.

Quantum spin liquids (QSLs) are novel phases of matter which remain quantum disordered even at the lowest temperature. They are characterized by emergent gauge fields and fractionalized quasiparticles. Here we show that the sub-kelvin thermal transport of the three-dimensional S=1/2 hyperhyperkagome quantum magnet PbCuTe_{2}O_{6} is governed by a sizeable charge-neutral fermionic contribution which is compatible with the itinerant fractionalized excitations of a spinon Fermi surface. We demonstrate that this hallmark feature of the QSL state is remarkably robust against sample crystallinity, large magnetic field, and field-induced magnetic order, ruling out the imitation of QSL features by extrinsic effects. Our findings thus reveal the characteristic low-energy features of PbCuTe_{2}O_{6} which qualify this compound as a true QSL material.

Unraveling the Active Vanadium Sites and Adsorbate Dynamics in VOx/CeO2 Oxidation Catalysts Using Transient IR Spectroscopy.

The oxidative dehydrogenation (ODH) of propane over supported vanadia catalysts is an attractive route toward propene (propylene) with the potential of industrial application and has been extensively studied over decades. Despite numerous mechanistic studies, the active vanadyl site of the reaction has not been elucidated. In this work, we unravel the ODH reaction mechanism, including the nuclearity-dependent vanadyl and surface dynamics, over ceria-supported vanadia (VOx/CeO2) catalysts by applying (isotopic) modulation excitation IR spectroscopy supported by operando Raman and UV-vis spectroscopies. Based on our loading-dependent analysis, we were able to identify two different mechanisms leading to propylene, which are characterized by isopropyl- and acrylate-like intermediates. The modulation excitation IR approach also allows for the determination of the time evolution of the vanadia, hydroxyl, and adsorbate dynamics, underlining the intimate interplay between the surface vanadia species and the ceria support. Our results highlight the potential of transient IR spectroscopy to provide a detailed understanding of reaction mechanisms in oxidation catalysis and the dynamics of surface catalytic processes in general.

Toward an Atomic-Level Understanding of Ceria-Based Catalysts: When Experiment and Theory Go Hand in Hand.

ConspectusBecause ceria (CeO2) is a key ingredient in the formulation of many catalysts, its catalytic roles have received a great amount of attention from experiment and theory. Its primary function is to enhance the oxidation activity of catalysts, which is largely governed by the low activation barrier for creating lattice O vacancies. Such an important characteristic of ceria has been exploited in CO oxidation, methane partial oxidation, volatile organic compound oxidation, and the water-gas shift (WGS) reaction and in the context of automotive applications. A great challenge of such heterogeneously catalyzed processes remains the unambiguous identification of active sites.In oxidation reactions, closing the catalytic cycle requires ceria reoxidation by gas-phase oxygen, which includes oxygen adsorption and activation. While the general mechanistic framework of such processes is accepted, only very recently has an atomic-level understanding of oxygen activation on ceria powders been achieved by combined experimental and theoretical studies using in situ multiwavelength Raman spectroscopy and DFT.Recent studies have revealed that the adsorption and activation of gas-phase oxygen on ceria is strongly facet-dependent and involves different superoxide/peroxide species, which can now be unambiguously assigned to ceria surface sites using the combined Raman and DFT approach. Our results demonstrate that, as a result of oxygen dissociation, vacant ceria lattice sites are healed, highlighting the close relationship of surface processes with lattice oxygen dynamics, which is also of technical relevance in the context of oxygen storage-release applications.A recent DFT interpretation of Raman spectra of polycrystalline ceria enables us to take account of all (sub)surface and bulk vibrational features observed in the experimental spectra and has revealed new findings of great relevance for a mechanistic understanding of ceria-based catalysts. These include the identification of surface oxygen (Ce-O) modes and the quantification of subsurface oxygen defects. Combining these theoretical insights with operando Raman experiments now allows the (sub)surface oxygen dynamics of ceria and noble metal/ceria catalysts to be monitored under the reaction conditions.Applying these findings to Au/ceria catalysts provides univocal evidence for ceria support participation in heterogeneous catalysis. For room-temperature CO oxidation, operando Raman monitoring the (sub)surface defect dynamics clearly demonstrates the dependence of catalytic activity on the ceria reduction state. Extending the combined experimental/DFT approach to operando IR spectroscopy allows the elucidation of the nature of the active gold as (pseudo)single Au+ sites and enables us to develop a detailed mechanistic picture of the catalytic cycle. Temperature-dependent studies highlight the importance of facet-dependent defect formation energies and adsorbate stabilities (e.g., carbonates). While the latter aspects are also evidenced to play a role in the WGS reaction, the facet-dependent catalytic performance shows a correlation with the extent of gold agglomeration. Our findings are fully consistent with a redox mechanism, thus adding a new perspective to the ongoing discussion of the WGS reaction.As outlined above for ceria-based catalysts, closely combining state-of-the-art in situ/operando spectroscopy and theory constitutes a powerful approach to rational catalyst design by providing essential mechanistic information based on an atomic-level understanding of reactions.

New advances in using Raman spectroscopy for the characterization of catalysts and catalytic reactions.

Gaining insight into the mode of operation of heterogeneous catalysts is of great scientific and economic interest. Raman spectroscopy has proven its potential as a powerful vibrational spectroscopic technique for a fundamental and molecular-level characterization of catalysts and catalytic reactions. Raman spectra provide important insight into reaction mechanisms by revealing specific information on the catalysts' (defect) structure in the bulk and at the surface, as well as the presence of adsorbates and reaction intermediates. Modern Raman instrumentation based on single-stage spectrometers allows high throughput and versatility in design of in situ/operando cells to study working catalysts. This review highlights major advances in the use of Raman spectroscopy for the characterization of heterogeneous catalysts made during the past decade, including the development of new methods and potential directions of research for applying Raman spectroscopy to working catalysts. The main focus will be on gas-solid catalytic reactions, but (photo)catalytic reactions in the liquid phase will be touched on if it appears appropriate. The discussion begins with the main instrumentation now available for applying vibrational Raman spectroscopy to catalysis research, including in situ/operando cells for studying gas-solid catalytic processes. The focus then moves to the different types of information available from Raman spectra in the bulk and on the surface of solid catalysts, including adsorbates and surface depositions, as well as the use of theoretical calculations to facilitate band assignments and to describe (resonance) Raman effects. This is followed by a presentation of major developments in enhancing the Raman signal of heterogeneous catalysts by use of UV resonance Raman spectroscopy, surface-enhanced Raman spectroscopy (SERS), and shell-isolated nanoparticle surface-enhanced Raman spectroscopy (SHINERS). The application of time-resolved Raman studies to structural and kinetic characterization is then discussed. Finally, recent developments in spatially resolved Raman analysis of catalysts and catalytic processes are presented, including the use of coherent anti-Stokes Raman spectroscopy (CARS) and tip-enhanced Raman spectroscopy (TERS). The review concludes with an outlook on potential future developments and applications of Raman spectroscopy in heterogeneous catalysis.

Elucidating CO2 Hydrogenation over In2 O3 Nanoparticles using Operando UV/Vis and Impedance Spectroscopies.

In2 O3 has emerged as a promising catalyst for CO2 activation, but a fundamental understanding of its mode of operation in CO2 hydrogenation is still missing, as the application of operando vibrational spectroscopy is challenging due to absorption effects. In this mechanistic study, we systematically address the redox processes related to the reverse water-gas shift reaction (rWGSR) over In2 O3 nanoparticles, both at the surface and in the bulk. Based on temperature-dependent operando UV/Vis spectra and a novel operando impedance approach for thermal powder catalysts, we propose oxidation by CO2 as the rate-determining step for the rWGSR. The results are consistent with redox processes, whereby hydrogen-containing surface species are shown to exhibit a promoting effect. Our findings demonstrate that oxygen/hydrogen dynamics, in addition to surface processes, are important for the activity, which is expected to be of relevance not only for In2 O3 but also for other reducible oxide catalysts.

Insight into the mechanism of the water-gas shift reaction over Au/CeO2 catalysts using combined operando spectroscopies.

The mechanism of the low-temperature water-gas shift (LT-WGS) reaction over Au/CeO2 catalysts with different ceria terminations, i.e., (111), (110), and (100) facets, was investigated. Using combined operando Raman and UV-Vis spectroscopy as well as isotope exchange experiments, we are able to draw conclusions about the reducibility behaviour and the exchange of surface oxygen. Additional density functional theory (DFT) calculations facilitate the vibrational bands assignments and enhance the interpretation of the results on a molecular level. A facet-dependent role of gold is observed with respect to the oxygen dynamics, since for the CeO2(111) facet the presence of gold is required to exchange surface oxygen, whereas the CeO2(110) facet requires no gold, as rationalized by the low defect formation energy of this facet. This behaviour suggests that surface properties (termination, stepped surface) may have a strong effect on the reactivity. While the reduction of the support accompanies the reaction, its extent does not directly correlate with activity, highlighting the importance of other properties, such as the dissociative adsorption of water and/or CO2/H2 desorption. The results of our facet-dependent study are consistent with a redox mechanism, as underlined by H218O isotopic exchange experiments demonstrating the ready exchange of surface oxygen.

The role of platinum on the NOx storage and desorption behavior of ceria: an online FT-IR study combined with in situ Raman and UV-vis spectroscopy.

The role of platinum on the room temperature NOx storage mechanism and the NOx desorption behavior of ceria was investigated by combining online FT-IR gas-phase analysis with in situ Raman and UV-vis spectroscopy. The type of pretreatment, leading to the presence of different platinum states (Pt0, and mixed Pt0/Pt2+), is shown to have a major effect on the NOx storage and desorption properties. Upon loading of ceria with platinum (1 wt%), NOx storage capacities decrease except for reductively pretreated Pt/CeO2, enabling new reaction pathways via activation of gas-phase oxygen. In the absence of oxygen, NO is reduced by metallic platinum leading to N2O and N2 formation. In situ Raman spectra provide mechanistic information, by monitoring changes in ceria surface and subsurface oxygen, as well as PtOx during NOx storage. In the presence of gas-phase oxygen, NOx storage is related to the consumption of (sub)surface oxygen and PtOx, and proposed to involve NO2 or [NO + O2] intermediates reacting with surface oxygen. The NOx desorption behavior is shown to be strongly related to the stored NOx species. Oxidative pretreatment of ceria resulted in the largest amount of stored nitrates, consistent with NOx being mostly desorbed at elevated temperatures, i.e., within 300-500 °C. Reductive pretreatment and/or addition of platinum significantly increased the fraction of stored nitrite, thereby shifting the main NOx desorption temperature to values <300 °C. Storage and subsequent desorption of NOx in PtOx/CeO2 was associated with PtOx reduction and reoxidation, as monitored by in situ UV-vis and Raman spectra. Through detailed analysis we were able to elucidate the influence of platinum on NOx storage/desorption and demonstrate the participation of different platinum states in room temperature NOx storage, with each platinum state opening a distinct new reaction pathway.

Operando Raman Shift Replaces Current in Electrochemical Analysis of Li-ion Batteries: A Comparative Study.

Li-rich and catalytically active γ-LixV2O5 (x = 1.48) was investigated as a cathode for its heterogeneous charge transfer kinetics. Using a specially designed two-electrode system lithium half cell, Butler-Volmer analysis was performed, and Raman spectra were acquired in 18 mV intervals. A direct correlation was observed between the Raman shift of the active modes Ag,Bg, Au, and Bu, and the development of the Faraday current at the working electrode. The Raman intensity and the Raman shift were implemented to replace the current in a Tafel plot used for the analysis of Butler-Volmer kinetics. Striking similarities in the charge transfer proportionality constants α were found for current and Raman-based analysis. The potential of this new method of Raman-aided electrochemical detection at the diffraction limit is discussed.

Evolution of the Nematic Susceptibility in LaFe_{1-x}Co_{x}AsO.

We report a systematic elastoresistivity study on LaFe_{1-x}Co_{x}AsO single crystals, which have well separated structural and magnetic transition lines. All crystals show a Curie-Weiss-like nematic susceptibility in the tetragonal phase. The extracted nematic temperature is monotonically suppressed upon cobalt doping, and changes sign around the optimal doping level, indicating a possible nematic quantum critical point beneath the superconducting dome. The amplitude of the nematic susceptibility shows a peculiar double-peak feature. This could be explained by a combined effect of different contributions to the nematic susceptibility, which are amplified at separated doping levels of LaFe_{1-x}Co_{x}AsO.

Substrate-Independent Magnetic Bistability in Monolayers of the Single-Molecule Magnet Dy2 ScN@C80 on Metals and Insulators.

Magnetic hysteresis is demonstrated for monolayers of the single-molecule magnet (SMM) Dy2 ScN@C80 deposited on Au(111), Ag(100), and MgO|Ag(100) surfaces by vacuum sublimation. The topography and electronic structure of Dy2 ScN@C80 adsorbed on Au(111) were studied by STM. X-ray magnetic CD studies show that the Dy2 ScN@C80 monolayers exhibit similarly broad magnetic hysteresis independent on the substrate used, but the orientation of the Dy2 ScN cluster depends strongly on the surface. DFT calculations show that the extent of the electronic interaction of the fullerene molecules with the surface is increasing dramatically from MgO to Au(111) and Ag(100). However, the charge redistribution at the fullerene-surface interface is fully absorbed by the carbon cage, leaving the state of the endohedral cluster intact. This Faraday cage effect of the fullerene preserves the magnetic bistability of fullerene-SMMs on conducting substrates and facilitates their application in molecular spintronics.

Influence of Chain Architecture on Nanopore Accessibility in Polyelectrolyte Block-Co-Oligomer Functionalized Mesopores.

Functionalized ordered mesoporous silica materials are commonly investigated for applications such as drug release, sensing, and separation processes. Although, various homopolymer functionalized responsive mesopores are reported, little focus has been put on copolymers in mesopores. Mesoporous silica films are functionalized with responsive and orthogonally charged block-co-oligomers. Responsive 2-dimethylamino)ethyl methacrylate)-block-2-(methacryloyloxy)ethyl phosphate (DMAEMA-b-MEP) block-co-oligomers are introduced into mesoporous films using controlled photoiniferter initiated polymerization. This approach allows a very flexible charge composition design. The obtained block-co-oligomer functionalized mesopores show a complex gating behavior indicating a strong interplay between the different blocks emphasizing the strong influence of charge distribution inside mesopores on ionic pore accessibility. For example, in contrast to mesopores functionalized with zwitterionic polymers, DMAEMA-b-MEP block-co-oligomer functionalized mesopores, containing two oppositely charged blocks, do not show bipolar ion exclusion, demonstrating the influence of the chain architecture on mesopore accessibility. Furthermore, ligand binding-based selective gating is strongly influenced by this chain architecture as demonstrated by an expansion of pore accessibility states for block-co-oligomer functionalized mesopores as compared to the individual polyelectrolyte functionalization for calcium induced gating.

Application of Raman Spectroscopy to Working Gas Sensors: From in situ to operando Studies.

Understanding the mode of operation of gas sensors is of great scientific and economic interest. A knowledge-based approach requires the development and application of spectroscopic tools to monitor the relevant surface and bulk processes under working conditions (operando approach). In this review we trace the development of vibrational Raman spectroscopy applied to metal-oxide gas sensors, starting from initial applications to very recent operando spectroscopic approaches. We highlight the potential of Raman spectroscopy for molecular-level characterization of metal-oxide gas sensors to reveal important mechanistic information, as well as its versatility regarding the design of in situ/operando cells and the combination with other techniques. We conclude with an outlook on potential future developments.

Elucidating the Mechanism of Working SnO2 Gas Sensors Using Combined Operando UV/Vis, Raman, and IR Spectroscopy.

SnO2 is the most widely used metal oxide gas-sensing material but a detailed understanding of its functioning is still lacking despite its relevance for applications. To gain new mechanistic insight into SnO2 gas sensors under working conditions, we have developed an operando approach based on combined UV/Vis, Raman, and FTIR spectroscopy, allowing us for the first time to relate the sensor response to the concentration of oxygen vacancies in the metal oxide, the nature of the adsorbates, and the gas-phase composition. We demonstrate with the example of ethanol gas sensing that the sensor resistance is directly correlated with the number of surface oxygen vacancies and the presence of surface species, in particular, acetate and hydroxy groups. Our operando results enable an assessment of mechanistic models proposed in the literature to explain gas sensor operation. Owing to their fundamental nature, our findings are of direct relevance also for other metal oxide gas sensors.

Unusual Phonon Heat Transport in α-RuCl_{3}: Strong Spin-Phonon Scattering and Field-Induced Spin Gap.

The honeycomb Kitaev-Heisenberg model is a source of a quantum spin liquid with Majorana fermions and gauge flux excitations as fractional quasiparticles. Here we unveil the highly unusual low-temperature heat conductivity κ of α-RuCl_{3}, a prime candidate for realizing such physics: beyond a magnetic field of B_{c}≈7.5 T, κ increases by about one order of magnitude, both for in-plane as well as out-of-plane transport. This clarifies the unusual magnetic field dependence unambiguously to be the result of severe scattering of phonons off putative Kitaev-Heisenberg excitations in combination with a drastic field-induced change of the magnetic excitation spectrum. In particular, an unexpected, large energy gap arises, which increases linearly with the magnetic field, reaching remarkable ℏω_{0}/k_{B}≈50 K at 18 T.

Glycosylation profiles determine extravasation and disease-targeting properties of armed antibodies.

The ability of antibodies to extravasate out of blood vessels is critical for therapeutic activity, because molecular targets for most diseases are located outside of the endothelial lining. By performing detailed biodistribution studies with a novel IL9-armed cancer-specific antibody, we identified a clear correlation between N-linked glycan structures and tumor-targeting efficiencies. Site-specific glycan analysis provided a detailed view of the glycan microheterogeneity present on the IL9 portion of the recombinant protein. Nonsialylated glycan structures have a negative impact on disease-homing activity, highlighting the importance of glycosylation control and characterization during process development.

STM Study of Au(111) Surface-Grafted Paramagnetic Macrocyclic Complexes [Ni2L(Hmba)](+) via Ambidentate Coligands.

Molecular anchoring and electronic properties of macrocyclic complexes fixed on gold surfaces have been investigated mainly by using scanning tunnelling microscopy (STM) and complemented with X-ray photoelectron spectroscopy (XPS). Exchange-coupled macrocyclic complexes [Ni2L(Hmba)](+) were deposited via 4-mercaptobenzoate ligands on the surface of a Au(111) single crystal from a mM solution of the perchlorate salt [Ni2L(Hmba)]ClO4 in dichloromethane. The combined results from STM and XPS show the formation of large monolayers anchored via Au-S bonds with a height of about 1.5 nm. Two apparent granular structures are visible: one related to the dinickel molecular complexes (cationic structures) and a second one related to the counterions ClO4(-) which stabilize the monolayer. No type of short and long-range order is observed. STM tip-interaction with the monolayer reveals higher degradation after 8 h of measurement. Spectroscopy measurements suggest a gap of about 2.5 eV between HOMO and LUMO of the cationic structures and smaller gap in the areas related to the anionic structures.