Analyzing water hyacinth plants from two South African rivers for the detection of seven pharmaceuticals and their metabolites.

Water hyacinth plants (Eichhornia crassipes Mart.) collected from two South African rivers were analyzed in order to investigate their suitability for judging the presence of pharmaceuticals in the water. Thereby, a number of drugs, including amitriptyline, atenolol, citalopram, orphenadrine, lidocaine, telmisartan, and tramadol, could be detected. Particularly for the latter substance, relatively high concentrations (more than 5000 ng g-1 dry plant material) were detected in the water plants. Subsequently, the plant extracts were also screened for drug-derived transformation products, whereby a series of phase-one metabolites could be tentatively identified.

Uptake and metabolization of four sartan drugs by eight different plants: Targeted and untargeted analyses by HPLC-drift-tube-ion-mobility quadrupole time-of-flight mass spectrometry.

In this study, we investigated the uptake and metabolization of four drugs (plus the associated prodrugs) from the sartan family by eight edible plants. Growing the plants hydroponically in a medium containing the respective drug, more than 40 phases I and II metabolites derived from the four sartan drugs could be tentatively identified. To demonstrate the suitability of the proposed analytical approach for actual environmental samples, garden cress (Lepidium sativum) selected as a model plant was grown in water drawn from the effluent of two local wastewater treatment plants. Thereby, three of the sartans, namely, olmesartan, candesartan, and valsartan, could be found in the plant extracts at concentrations of 3.1, 10.4, and 14.4 ng g-1 , respectively. Additionally, for candesartan and valsartan, a glycosylated transformation product could be detected. In order to extend the present (targeted) workflow also toward the analysis of unknown transformation products (i.e., those not listed in the custom-made database used for this research), a nontargeted approach for the analysis of plant extracts with respect to the presence of drug-related metabolites was developed. Comparison of the targeted and the nontargeted workflows led to the finding of two additional, so far unidentified, transformation products originating from azilsartan.

A fast-screening approach for the tentative identification of drug-related metabolites from three non-steroidal anti-inflammatory drugs in hydroponically grown edible plants by HPLC-drift-tube-ion-mobility quadrupole time-of-flight mass spectrometry.

The (tentative) identification of unknown drug-related phase II metabolites in plants upon drug uptake remains a challenging task despite improved analytical instrument performance. To broaden the knowledge of possible drug metabolization, a fast-screening approach for the tentative identification of drug-related phase II metabolites is presented in this work. Therefore, an in silico database for the three non-steroidal anti-inflammatory drugs (ketoprofen, mefenamic acid, and naproxen) and a sub-group of their theoretical phase II metabolites (based on combinations with glucose, glucuronic acid, and malonic acid) was created. Next, the theoretical exact masses (protonated species and ammonia adducts) were calculated and used as precursor ions in an autoMS/MS measurement method. The applicability of this workflow was tested on the example of eleven edible plants, which were hydroponically grown in solutions containing the respective drug at a concentration level of 20 mg/L. For the three drugs investigated this led to the tentative identification of 41 metabolites (some of them so far not described in this context), such as combinations of hydroxylated mefenamic acid with up to four glucose units or hydroxylated mefenamic acid with two glucose and three malonic acid units.

A new analytical workflow using HPLC with drift-tube ion-mobility quadrupole time-of-flight/mass spectrometry for the detection of drug-related metabolites in plants.

Investigations into the interaction of xenobiotics with plants (and in particular edible plants) have gained substantial interest, as water scarcity due to climate-change-related droughts requires the more frequent use of reclaimed wastewaters for irrigation in agriculture. Non-steroidal anti-inflammatory drugs are common contaminants found in wastewater treatment plant effluents. For this reason, the interaction of nine edible plants with diclofenac (DCF), a widely used representative of this group of drugs, was investigated. For this purpose, plants were hydroponically grown in a medium containing DCF. For the detection of unknown DCF-related metabolites formed in the plant upon uptake of the parent drug' a new workflow based on the use of HPLC coupled to drift-tube ion-mobility quadrupole time-of-flight/mass spectrometry (DTIM QTOF-MS) was developed. Thereby' for chromatographic peaks eluting from the HPLC, drift times were recorded, and analytes were subsequently fragmented in the DTIM QTOF-MS to provide significant fragments. All information available (retention times, drift times, fragment spectra, accurate mass) was finally combined' allowing the suggestion of molecular formulas for 30 DCF-related metabolites formed in the plant, whereby 23 of them were not yet known from the literature.

Synthesis of α-CF3-proline derivatives by means of a formal (3 + 2)-cyclisation between trifluoropyruvate imines and Michael acceptors.

We herein report the first formal (3 + 2)-cyclisation between 3,3,3-trifluoropyruvate-derived imines and indandione-based Michael acceptors. This reaction gives access to a novel class of spirocyclic α-CF3-α-proline derivatives with complete control of the diastereoselectivity under phase transfer-catalysed reaction conditions.

Uptake and metabolism of the antidepressants sertraline, clomipramine, and trazodone in a garden cress (Lepidium sativum) model.

Environmental contamination with pharmaceuticals has received growing attention in recent years. Several studies describe the presence of traces of drugs in water bodies and soils and their impacts on nontarget organisms including plants. Due to these facts investigations of the uptake and metabolism of pharmaceuticals in organisms is an emerging research area. The present study demonstrates the analysis of three selected antidepressants (sertraline, clomipramine, and trazodone) as well as metabolites and transformation products in a cress model (Lepidium sativum). Cress was treated with tap water containing 10 mg/L of the parent drugs. Employing an analytical approach based on high performance liquid chromatography coupled with quadrupole time of flight or Orbitrap mass spectrometry in MS and MS² modes, in total 14 substances were identified in the cress extracts. All three parent drugs were taken up by the cress and translocated from the roots to the leaves in specific patterns. In addition to this, eleven metabolite species were identified. They were generated by hydroxylation, demethylation, conjugation with amino acids, or combinations of these mechanisms. Finally, the inclusion of control cultures in the experimental setup allowed for a differentiation of "true" metabolites generated by the cress and transformation products generated by plant-independent mechanisms.

Insights into the uptake, metabolization, and translocation of four non-steroidal anti-inflammatory drugs in cress (Lepidium sativum) by HPLC-MS2.

The metabolization of four non-steroidal anti-inflammatory drugs by cress (Lepidium sativum) was investigated using a HPLC-MS2 method. Cress was grown hydroponically in water containing 0.1 mg/L of each drug for investigations on the kinetics of drug uptake and metabolization over a growing period of 12 days. It could be shown that the parent drugs are metabolized and the abundance of both the parent drug and the metabolites formed, varies over time. Furthermore the distribution of the investigated substances within the different plant parts changed throughout the duration of the experiment due to translocation. Finally cress was cultivated in a solution containing the four drugs in concentrations as low as 0.001 mg/L to resemble the situation in real reclaimed wastewaters. Employing a QuEChERS approach for sample extraction and HPLC-MS2 in the multiple reaction monitoring mode allowed detecting nine metabolites in this cress sample.

Insulin Mimetic Properties of Extracts Prepared from Bellis perennis.

Diabetes mellitus (DM) and consequential cardiovascular diseases lead to millions of deaths worldwide each year; 90% of all people suffering from DM are classified as Type 2 DM (T2DM) patients. T2DM is linked to insulin resistance and a loss of insulin sensitivity. It leads to a reduced uptake of glucose mediated by glucose transporter 4 (GLUT4) in muscle and adipose tissue, and finally hyperglycemia. Using a fluorescence microscopy-based screening assay we searched for herbal extracts that induce GLUT4 translocation in the absence of insulin, and confirmed their activity in chick embryos. We found that extracts prepared from Bellis perennis (common daisy) are efficient inducers of GLUT4 translocation in the applied in vitro cell system. In addition, these extracts also led to reduced blood glucose levels in chicken embryos (in ovo), confirming their activity in a living organism. Using high-performance liquid chromtaography (HPLC) analysis, we identified and quantified numerous polyphenolic compounds including apigenin glycosides, quercitrin and chlorogenic acid, which potentially contribute to the induction of GLUT4 translocation. In conclusion, Bellis perennis extracts reduce blood glucose levels and are therefore suitable candidates for application in food supplements for the prevention and accompanying therapy of T2DM.

Asymmetric Synthesis of 2,3-Dihydrobenzofurans by a [4+1] Annulation Between Ammonium Ylides and In Situ Generated o-Quinone Methides.

A highly enantio- and diastereoselective [4+1] annulation between in situ generated ammonium ylides and o-quinone methides for the synthesis of a variety of 2,3-dihydrobenzofurans has been developed. The key factors controlling the reactivity and stereoselectivity were systematically investigated by experimental and computational means and the energy profiles obtained provide a deeper insight into the mechanistic details of this reaction.

Investigation of photochemical reaction products of glucose formed during direct UV detection in CE.

In CE, saccharides are accessible to direct UV detection due to a photochemical reaction in the detection window of the separation capillary resulting in the formation of UV absorbing substances. Employing a CE method that allows long in-capillary irradiation with subsequent UV and MS detection, the present study could identify several reaction products of glucose. Among these were UV absorbing substances so far unknown to be formed during direct UV detection with the chemical formulas C4 H6 O2 , C5 H6 O4 , C5 H8 O3, and C6 H8 O5 . Investigations of the impact of the irradiation time revealed differences between these reaction products suggesting differing reaction mechanisms especially for the smallest products. More detailed information could be obtained by experiments with isotope-labeled substrates performed to determine the parts of glucose that are converted to the particular reaction products. In addition, structural formulas for the reaction products were suggested based on HPLC-MS/MS measurements of off-line irradiated glucose solutions which revealed the existence of functional groups such as carboxylic acid or aldehyde groups.

Analysis of saccharides in beverages by HPLC with direct UV detection.

The present study demonstrates the suitability of direct UV detection for saccharide analysis in HPLC. Under highly alkaline conditions, the non-UV absorbing saccharides are converted by a photo-initiated chemical reaction in the detection cell into malonenolate, which can be detected at 266 nm. A straightforward method for such direct UV detection of saccharides after their separation by anion-exchange chromatography was developed and successfully applied to several beverage samples. Investigation and optimization of the influencing factors using design of experiment resulted in a baseline separation of glucose, fructose, and sucrose within 6 min and LOD values below 0.2 mg L(-1). In addition, a fast, simple and cost-effective flow injection method was developed to estimate the total saccharide concentration. The results of this method applied to beverage samples are in good agreement with the chromatographic method as well as to the saccharide concentration stated by the manufacturer. Finally, a comparison of different commercially available UV detectors and detector cells revealed that sensitive detection requires the use of recently introduced flow cells with extended path length.

Separation and characterization of oligomeric hindered amine light stabilizers using high-performance liquid chromatography with UV and quadrupole time-of-flight mass spectrometric detection.

Hindered amine light stabilizers are an important class of stabilizers that protect synthetic polymers from degradation and thus from changing mechanical and optical properties. The current study presents an HPLC method capable of separating oligomeric hindered amine light stabilizers on a commercially available stationary phase, employing an MS-compatible novel mobile phase. Based on the exact masses observed with Q-TOF-MS, a comprehensive characterization of five different types of oligomeric hindered amine light stabilizers was achieved, leading to structural information not included in the datasheets provided by the suppliers. For the different investigated hindered amine light stabilizers, a number of recurring units up to 17 and a molecular weight of 5200 g/mol were detected. Furthermore, the analysis of stabilizer extracts of processed polypropylene samples containing different types of hindered amine light stabilizers revealed significant differences in the oligomeric pattern between standards and polymer samples. Thus, changes in the analytes' oligomeric pattern resulting from processing or aging of polymer materials can be monitored with the presented method.

Synthesis of quinoxalines or quinolin-8-amines from N-propargyl aniline derivatives employing tin and indium chlorides.

Pyrazino compounds such as quinoxalines are 1,4-diazines with widespread occurrence in nature. Quinolin-8-amines are isomerically related and valuable scaffolds in organic synthesis. Herein, we present intramolecular main group metal Lewis acid catalyzed formal hydroamination as well as hydroarylation methodology using mono-propargylated aromatic ortho-diamines. The annulations can be conducted utilizing equal aerobic conditions with either stannic chloride or indium(iii) chloride and represent primary examples for main group metal catalyzed 6-exo-dig and 6-endo-dig, respectively, cyclizations in such settings. Both types of reactions can also be utilized in a one-pot manner starting from ortho-nitro N-propargyl anilines using stoichiometric amounts SnCl2·2H2O or In powder. Mechanistic considerations are presented regarding the substituent-depending regioselectivity.

Asymmetric syntheses of three-membered heterocycles using chiral amide-based ammonium ylides.

The use of carbonyl-stabilised ammonium ylides to access chiral glycidic amides and the corresponding aziridines has so far been limited to racemic trans-selective protocols. We herein report the development of an asymmetric approach to access such compounds with high levels of stereoselectivity using easily accessible chiral auxiliary-based ammonium ylides. The use of phenylglycinol as the chiral auxiliary was found to be superior to Evans or pseudoephedrine-based auxiliaries resulting in good to excellent stereoselectivities in both, epoxidation and aziridination reactions.

Characterization and quantitation of polyolefin microplastics in personal-care products using high-temperature gel-permeation chromatography.

In recent years, the development of reliable methods for the quantitation of microplastics in different samples, including evaluating the particles' adverse effects in the marine environment, has become a great concern. Because polyolefins are the most prevalent type of polymer in personal-care products containing microplastics, this study presents a novel approach for their quantitation. The method is suitable for aqueous and hydrocarbon-based products, and includes a rapid sample clean-up involving twofold density separation and a subsequent quantitation with high-temperature gel-permeation chromatography. In contrast with previous procedures, both errors caused by weighing after insufficient separation of plastics and matrix and time-consuming visual sorting are avoided. In addition to reliable quantitative results, in this investigation a comprehensive characterization of the polymer particles isolated from the product matrix, covering size, shape, molecular weight distribution and stabilization, is provided. Results for seven different personal-care products are presented. Recoveries of this method were in the range of 92-96 %.

Differences in pharmacokinetics of apple polyphenols after standardized oral consumption of unprocessed apple juice.

BACKGROUND: Polyphenols are chemical compounds of the secondary plant metabolism. High concentrations can be found in various fruits including apples, berries and grapes. Polyphenols are associated with numerous health beneficial effects including a reduced risk for cardiovascular disease or diabetes. The human body cannot synthesize or store polyphenols and relies on continuous replenishment by daily diet. Unfortunately, knowledge on absorption, metabolization and excretion is still limited. The aim of this study was to determine the pharmacokinetic fate of apple polyphenols in young healthy adults. METHODS: Volunteers consumed 500 mL of an unfiltered apple juice. Blood and urine samples were collected within a time period of ten hours and analyzed for their total phenolic content, concentration of selected individual polyphenolic compounds and antioxidant capacity. RESULTS: Large differences in apple polyphenol pharmacokinetics between single subjects were observed. Those could be divided into subgroups according to fast or slow rates of polyphenol metabolism. Some subjects showed no detectable metabolism within the study time frame at all. An increase in the total phenolic content over time did not correlate with an observed, highly elevated antioxidant capacity (AOC) in the blood plasma after apple juice consumption. The determined increase of the AOC was rather a result of a high fructose content of the apple juice. No differences in renal excretion were detected between female and male subjects. However, relative concentrations were slightly higher in male subjects. CONCLUSIONS: Apple derived polyphenols can be readily detected in human blood and urine after juice consumption. The existence of sub-populations with different pharmacokinetics suggests significant variations in the individual metabolism rates of polyphenolic substances with implications on bioavailability and potential health effects within the body. TRIAL REGISTRATION: O2413 (Ethics Commissions of Upper Austria) and 415-EP/73/233-2013 Salzburg (Ethics Commissions of Salzburg).

Rhodium-coordinated poly(arylene-ethynylene)-alt-poly(arylene-vinylene) copolymer acting as photocatalyst for visible-light-powered NAD⁺/NADH reduction.

A 2,2'-bipyridyl-containing poly(arylene-ethynylene)-alt-poly(arylene-vinylene) polymer, acting as a light-harvesting ligand system, was synthesized and coupled to an organometallic rhodium complex designed for photocatalytic NAD(+)/NADH reduction. The material, which absorbs over a wide spectral range, was characterized by using various analytical techniques, confirming its chemical structure and properties. The dielectric function of the material was determined from spectroscopic ellipsometry measurements. Photocatalytic reduction of nucleotide redox cofactors under visible light irradiation (390-650 nm) was performed and is discussed in detail. The new metal-containing polymer can be used to cover large surface areas (e.g. glass beads) and, due to this immobilization step, can be easily separated from the reaction solution after photolysis. Because of its high stability, the polymer-based catalyst system can be repeatedly used under different reaction conditions for (photo)chemical reduction of NAD(+). With this concept, enzymatic, photo-biocatalytic systems for solar energy conversion can be facilitated, and the precious metal catalyst can be recycled.

Determination of melamine impurities by capillary zone electrophoresis with UV- and quadrupole time-of-flight mass spectrometric detection.

A method based on CZE coupled to quadrupole TOF MS (Q-TOF MS), which is suitable to analyze seven common melamine impurities is presented. MS compatible formic acid based BGEs with various concentrations of organic modifiers were investigated using UV detection to determine the best separation system regarding resolution and speed. The optimized BGE consisted of 350 mM formic acid with 10% ACN and migration times were <6 min. The detection limits were considerably improved when ESI MS was applied instead of UV detection. In addition the instrument allows quantification with good linearity and repeatability in the relevant concentration range. The analytical characteristics of the method were evaluated for melamine, guanylurea, diaminotriazine, ureidomelamine, guanlymelamine, melam, methylmelamine, and dimethylmelamine both with UV and MS detection. Several different melamine samples were analyzed und the determined impurity levels were in the range from 0.02 to 2.3%.

Analysis of paspalic acid, lysergic acid, and iso-lysergic acid by capillary zone electrophoresis with UV- and quadrupole time-of-flight mass spectrometric detection.

CZE was investigated for separation of lysergic, iso-lysergic, and paspalic acid. BGEs were optimized regarding separation selectivity and analysis time as well as MS compatibility. BGEs using asparagine, Na-tetraborate, or ammonium acetate yielded satisfactory resolution when 40% of methanol was added and the pH adjusted to 8.3. Applying acidic BGEs also allowed fast separations but the poor stability under acidic conditions of the selected analytes prevented further use. With ultraviolet (UV) detection, LODs were 0.45 and 0.40 mg/L for paspalic acid and lysergic acid, respectively. Run-to-run precision of peak areas was 1.8% for lysergic acid and 1.9% for paspalic acid and day-to-day precision was 2.4 and 4.0%, respectively. When MS detection was used LODs improved to 0.09 mg/L for paspalic acid and 0.07 mg/L for lysergic acid. Repeatability results were excellent for a CZE-MS method without internal standard ranging from 3.4% for the highest standard concentration to 5.8% for the lowest concentration. Recovery and matrix effects were studied with samples taken from different stages of the manufacturing process and yielded an average recovery of 100.8% and a RSD of 5.7%.

Characterization of hindered amine light stabilizers employing capillary electrophoresis coupled to quadrupole time-of-flight mass spectrometry.

In the current work, a fast and reliable CE method for characterizing of six hindered amine light stabilizers (HALS), technical products commonly employed as UV-stabilizing agents for various polymeric materials, is presented. These compounds can be monomeric or oligomeric species whereby there is no or only limited information available concerning purity or actual structural composition of the respective stabilizer. Using a BGE based on formic acid with 10% acetonitrile, different constituents of several HALS could be separated by CE and identified employing QTOF/MS detection. In the case of Cyasorb 3529, ten different oligomers were discovered and possible structures were suggested based on exact mass measurements. The majority of the elucidated structures is not fully congruent with the information provided by the manufacturers. Furthermore, in the case of Chimassorb 119 and Tinuvin 770 impurities or unreacted compounds remaining from the manufacturing process could be identified. Besides performing such basic characterizations of technical grade HALS, the presented method is also shown to be suitable for a reliable identification of these stabilizers in real polymer samples.