Durable Roller-Based Swing-Structured Triboelectric Nanogenerator for Water Wave Energy Harvesting.

Ocean energy is a kind of clean and renewable energy source, but it cannot be efficiently harvested by traditional electromagnetic generators, due to its low-frequency characteristic. The emergence of triboelectric nanogenerators provides a more promising technology for collecting ocean energy. In this work, a durable roller-based swing-structured triboelectric nanogenerator (RS-TENG) is designed and fabricated for low-frequency water wave energy harvesting. The rolling structure reduces the wear between triboelectric materials and improves the device's durability. After a continuous operation of 1 260 000 cycles, the attenuation of the electrical outputs of the RS-TENG is below 1.6%, exhibiting excellent durability. At the same time, the output current can arrive at 53.2 µA. Under the triggering of water waves, the RS-TENG can generate an output power of 4.27 mW, corresponding to a power density of 1.16 W m-3. After the arraying, the output performance can be doubled, so that the TENG can successfully power an environmental monitoring sensor and ensure long-term stable operation of the sensor. This work provides an effective strategy for improving the device durability, which benefits the practical applications of the TENGs in large-scale blue energy harvesting.

High-Durability Stacked Disc-Type Rolling Triboelectric Nanogenerators for Environmental Monitoring Around Charging Buoys of Unmanned Ships.

Triboelectric nanogenerator (TENG) as a means of energy harvesting can effectively harvest ocean wave energy, but the energy conversion efficiency and stability of the device during long-term operations are still problems that must be solved for TENGs. Decreasing the frictional resistance between two triboelectric material surfaces is one of the critical approaches for improving the device efficiency and durability. In this work, a novel stacked disc-type rolling triboelectric nanogenerator (SDR-TENG) is designed and fabricated for low-frequency water wave energy harvesting. After 860 000 working cycles, the electrical output attenuation of the SDR-TENG basic unit is less than 5%, showing excellent device durability. Under the simulated water wave conditions, the SDR-TENG with four rolling TENG units can produce an output current of 84.4 µA and an output power of 7.6 mW, corresponding to an effective power density of 16.8 W m-3. This work not only proposes a strategy to effectively enhance the durability of the devices, but also provides a feasible solution for monitoring the surrounding environment of the charging buoys of unmanned ships.

A Triboelectric-Electromagnetic Hybrid Nanogenerator with Magnetic Coupling Assisted Waterproof Encapsulation for Long-Lasting Energy Harvesting.

Ocean energy harvesting based on a triboelectric nanogenerator (TENG) has great application potential, while the encapsulation of triboelectric devices in water poses a critical issue. Herein, a triboelectric-electromagnetic hybrid nanogenerator (TE-HNG) consisting of TENGs and electromagnetic generators (EMGs) is proposed to harvest water flow energy. A magnetic coupling transmission component is applied to replace traditional bearing structures, which can realize the fully enclosed packaging of the TENG devices and achieve long-lasting energy harvesting from water flow. Under the intense water impact, magnetic coupling reduces the possibility of internal gear damage due to excessive torque, indicating superior stability and robustness compared to conventional TENG. At the waterwheel rotates speed of 75 rpm, the TE-HNG can generate an output peak power of 114.83 mW, corresponding to a peak power density of 37.105 W m-3. After 5 h of continuous operation, the electrical output attenuation of TENG is less than 3%, demonstrating excellent device durability. Moreover, a self-powered temperature sensing system and a self-powered cathodic protection system based on the TE-HNG are developed and illustrated. This work provides a prospective strategy for improving the output stability of TENGs, which benefits the practical applications of the TENGs in large-scale blue energy harvesting.

Construction of electrochemical sensing interface towards Cd(II) based on activated g-C3N4 nanosheets: considering the effects of exfoliation and protonation treatment.

There is an urgent need to construct highly selective low-cost sensors for fast detection of toxic metal ions such as cadmium. When compared with 3D bulk materials, 2D layered materials after activation treatments show superior performances for electrochemical metal ion detection. The bulk graphitic carbon nitride (hereafter b-g-C3N4) was prepared by thermal polymerization with urea as a precursor; it was then activated through ultrasonic liquid exfoliation and protonation which resulted in successful fabrication of activated ultrathin g-C3N4 nanosheets (hereafter a-g-C3N4). The a-g-C3N4-modified glassy carbon electrode demonstrates excellent electrochemical performances for Cd2+ detection with 22.668 µA/µM sensitivity and 3.9 nM LOD (S/N = 3) due to high specific surface area and active sites created on the 2D layered structure. The chemical interference of Pb2+, Cu2+, and Hg2+ on Cd2+ detection was minimal. We have also measured Cd2+ in natural water and rice samples using the newly developed a-g-C3N4-modified electrode with high spike recoveries. Our results demonstrate the potential applications of newly developed a-g-C3N4-modified electrode for rapid detection of toxic metal ions in different sample matrixes. Graphical Abstract The activated g-C3N4 nanosheets (a-g-C3N4) were synthesized and used to construct electrochemical sensors with high sensitivity and anti-interference performance.

Assembling reduced graphene oxide with sulfur/nitrogen- "hooks" for electrochemical determination of Hg(II).

Herein the sulfur/nitrogen contained groups, serving as the "hooks" for electrochemical determination of Hg(II), were assembled on the reduced graphene oxide (hereafter SN-rGO) via a one-step facile hydrothermal method. The thiourea acts as a precursor for sulfur/nitrogen doping and partial reduction of graphene oxide. The SN-rGO was used to modify the glassy carbon electrode (GCE) for electrochemical detection of Hg(II) by square wave anodic stripping voltammetry (SWASV). The sulfur/nitrogen doping significantly improves the Hg(II) complexation by SN-rGO due to the creation of multifunctional groups on the graphene nanosheet. The SN-rGO modified electrode has excellent sensitivity (20.48 µA/µM) and limit of detection (LOD 8.93 nM) for Hg(II) detection. The newly developed Hg(II) sensing electrode possesses minimal interference for other ions typically found in natural waters. Therefore, it can be used for routine water quality monitoring. The fabrication of the SN-rGO electrode is rapid and low cost; hence, it offers a potential platform for environmental monitoring of toxic metal ions.