RESUMO
Mixed-halide CsPb(Br/I)3 perovskite quantum dots (QDs) are regarded as one of the most promising candidates for pure-red perovskite light-emitting diodes (PeLEDs) due to their precise spectral tuning property. However, the lead-rich surface of these QDs usually results in halide ion migration and nonradiative recombination loss, which remains a great challenge for high-performance PeLEDs. To solve the above issues, we employ a chelating agent of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid hydrate (DOTA) to polish the lead-rich surface of the QDs and meanwhile introduce a new ligand of 2,3-dimercaptosuccinic acid (DMSA) to passivate surface defects of the QDs. This synchronous post-treatment strategy results in high-quality CsPb(Br/I)3 QDs with suppressed halide ion migration and an improved photoluminescence quantum yield, which enables us to fabricate spectrally stable pure-red PeLEDs with a peak external quantum efficiency of 23.2%, representing one of the best performance pure-red PeLEDs based on mixed-halide CsPb(Br/I)3 QDs reported to date.
RESUMO
To overcome the severe problems arising from the insufficient light absorption of ultrathin self-assembly active layers and the high cost use of atomic force deposition (ALD)-grown low-leakage-current transport layers, we successfully developed a low-cost, simple and facile strategy of floating-film transfer and multilayer lamination (FFTML) for constructing highly-efficient ALD-free broadband polarization-sensitive organic photodetectors (OPDs) with the two commonly used structures of donor/acceptor planar heterojunction (PHJ) and donor:acceptor multilayer bulk heterojunction (BHJ). It was found that the PHJ-based polarization-sensitive OPD by FFTML possesses a low dark current due to the high carrier injection barrier, indicating it is more suitable to be applied in low polarized light detection scenarios. In contrast, the BHJ-based device by FFTML has a higher spectral responsivity in the whole wavelength due to more photo-excitons transferred to the donor:acceptor interface and dissociated into photoexcited carrirers. Furthermore, the film thickness, which is tuned by increasing lamination number of BHJ layers, has a big effect on the polarization-sensitive photodetection performance. The polarization-sensitive 4-BHJ OPD by FFTML finally achieved a high specific detectivity of 8.33 × 1010Jones, which was much higher than 2.72 × 1010Jones for the 2-BHJ device at 0 V. This work demonstrates that layer-by-layer lamination of self-assembly films can effectively improve the polarized-light detection performance, contributing significantly to the rapid development of the field.
RESUMO
Although tremendous progress has recently been made in quasi-2D perovskite light-emitting diodes (PeLEDs), the performance of red PeLEDs emitting at ≈650-660 nm, which have wide prospects for application in photodynamic therapy, is still limited by an inefficient energy transfer process between the quasi-2D perovskite layers. Herein, a symmetric molecule of 3,3'-(9H-fluorene-9,9-diyl)dipropanamide (FDPA) is designed and developed with two functional acylamino groups and incorporated into the quasi-2D perovskites as the additive for achieving high-performance red PeLEDs. It is demonstrated that the agent can simultaneously diminish the van der Waals gaps between individual perovskite layers and passivate uncoordinated Pb2+ related defects at the surface and grain boundaries of the quasi-2D perovskites, which truly results in an efficient energy transfer in the quasi-2D perovskite films. Consequently, the red PeLEDs emitting at 653 nm with a peak external quantum efficiency of 18.5% and a maximum luminance of 2545 cd m-2 are achieved, which is among the best performing red quasi-2D PeLEDs emitting at ≈650-660 nm. This work opens a way to further improve the electroluminescence performance of red PeLEDs.
RESUMO
Regulating molecular structure to optimize the active layer morphology is of considerable significance for improving the power conversion efficiencies (PCEs) in organic solar cells (OSCs). Herein, we demonstrated a simple ternary copolymerization approach to develop a terpolymer donor PM6-Tz20 by incorporating the 5,5'-dithienyl-2,2'-bithiazole (DTBTz, 20 mol%) unit into the backbone of PM6 (PM6-Tz00). This method can effectively tailor the molecular orientation and aggregation of the polymer, and then optimize the active layer morphology and the corresponding physical processes of devices, ultimately boosting FF and then PCE. Hence, the PM6-Tz20: Y6-based OSCs achieved a PCE of up to 17.1% with a significantly enhanced FF of 0.77. Using Ag (220 nm) instead of Al (100 nm) as cathode, the champion PCE was further improved to 17.6%. This work provides a simple and effective molecular design strategy to optimize the active layer morphology of OSCs for improving photovoltaic performance.
RESUMO
A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58â eV and a high absorption coefficient >105 â cm-1 , a high LUMO level of -3.89â eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180â h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18â h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.
RESUMO
Seed aging is an inevitable problem in the germplasm conservation of oil crops. Thus, clarifying the genetic mechanism of seed aging is important for rapeseed breeding. In this study, Brassica napus seeds were exposed to an artificial aging environment (40 °C and 90% relative humidity). Using a population of 172 recombinant inbred lines, 13 QTLs were detected on 8 chromosomes, which explained ~ 9.05% of the total phenotypic variation. The QTLs q2015AGIA-C08 and q2016AGI-C08-2 identified in the two environments were considered the same QTL. After artificial aging, lower germination index, increased relative electrical conductivity, malondialdehyde and proline content, and reduced soluble sugar, protein content and antioxidant enzyme activities were detected. Furthermore, seeds of extreme lines that were either left untreated (R0 and S0) or subjected to 15 days of artificial aging (R15 and S15) were used for transcriptome sequencing. In total, 2843, 1084, 429 and 1055 differentially expressed genes were identified in R15 vs. R0, S15 vs. S0, R0 vs. S0 and R15 vs. S15, respectively. Through integrated QTL mapping and RNA-sequencing analyses, seven genes, such as BnaA03g37460D, encoding heat shock transcription factor C1, and BnaA03g40360D, encoding phosphofructokinase 4, were screened as candidate genes involved in seed aging. Further researches on these candidate genes could broaden our understanding of the regulatory mechanisms of seed aging.
Assuntos
Envelhecimento/genética , Brassica napus/genética , Germinação/genética , Locos de Características Quantitativas , Sementes/genética , Brassica napus/crescimento & desenvolvimento , Brassica rapa/genética , Brassica rapa/crescimento & desenvolvimento , Mapeamento Cromossômico , Cromossomos de Plantas , Perfilação da Expressão Gênica , Regulação da Expressão Gênica no Desenvolvimento , Estudos de Associação Genética , Análise em Microsséries , Sementes/crescimento & desenvolvimentoRESUMO
Interface states influence the operation of nanocrystal (NC) solar cell carrier transport, recombination and energetic mechanisms. In a typical CdTe NC solar cell with a normal structure of a ITO/p-CdTe NCs/n-acceptor (or without)/Al configuration, the contact between the ITO and CdTe is a non-ohm contact due to a different work function (for an ITO, the value is ~4.7 eV, while for CdTe NCs, the value is ~5.3 eV), which results in an energetic barrier at the ITO/CdTe interface and decreases the performance of the NC solar cells. This work investigates how interface materials (including Au, MoO(x) and C60) affect the performance of NC solar cells. It is found that devices with interface materials have shown higher V(oc) than those without interface materials. For the case in which we used Au as an interface, we obtained a high open-circuit voltage of 0.65 V, coupled with a high fill factor (62%); this resulted in a higher energy conversion efficiency (ECE) of 5.3%, which showed a 30% increase in the ECE compared with those without the interlayer. The capacitance measurements indicate that the increased V(oc) in the case in which Au was used as the interface is likely due to good ohm contact between the Au's and the CdTe NCs' thin film, which decreases the energetic barrier at the ITO/CdTe interface.
RESUMO
Solution-processed cadmium telluride (CdTe) nanocrystal (NC) solar cells offer the advantages of low cost, low consumption of materials and large-scale production via a roll-to-roll manufacture process. Undecorated CdTe NC solar cells, however, tend to show inferior performance due to the abundant crystal boundaries within the active CdTe NC layer. The introduction of hole transport layer (HTL) is effective for promoting the performance of CdTe NC solar cells. Although high-performance CdTe NC solar cells have been realized by adopting organic HTLs, the contact resistance between active layer and the electrode is still a large problem due to the parasitic resistance of HTLs. Here, we developed a simple phosphine-doping technique via a solution process under ambient conditions using triphenylphosphine (TPP) as a phosphine source. This doping technique effectively promoted the power conversion efficiency (PCE) of devices to 5.41% and enabled the device to have extraordinary stability, showing a superior performance compared with the control device. Characterizations suggested that the introduction of the phosphine dopant led to higher carrier concentration, hole mobility and a longer lifetime of the carriers. Our work presents a new and simple phosphine-doping strategy for further improving the performance of CdTe NC solar cells.
RESUMO
Pure-red perovskite LEDs (PeLEDs) based on CsPb(Br/I)3 nanocrystals (NCs) usually suffer from a compromise in emission efficiency and spectral stability on account of the surface halide vacancies-induced nonradiative recombination loss, halide phase segregation, and self-doping effect. Herein, a "halide-equivalent" anion of benzenesulfonate (BS- ) is introduced into CsPb(Br/I)3 NCs as multifunctional additive to simultaneously address the above challenging issues. Joint experiment-theory characterizations reveal that the BS- can not only passivate the uncoordinated Pb2+ -related defects at the surface of NCs, but also increase the formation energy of halide vacancies. Moreover, because of the strong electron-withdrawing property of sulfonate group, electrons are expected to transfer from the CsPb(Br/I)3 NC to BS- for reducing the self-doping effect and altering the n-type behavior of CsPb(Br/I)3 NCs to near ambipolarity. Eventually, synergistic boost in device performance is achieved for pure-red PeLEDs with CIE coordinates of (0.70, 0.30) and a champion external quantum efficiency of 23.5%, which is one of the best value among the ever-reported red PeLEDs approaching to the Rec. 2020 red primary color. Moreover, the BS- -modified PeLED exhibits negligible wavelength shift under different operating voltages. This strategy paves an efficient way for improving the efficiency and stability of pure-red PeLEDs.
RESUMO
A room-temperature technique with all-nonpolar-solvent, which circumvents the sensitivity of ionic perovskite to polar solvent, has become attractive for the synthesis of metal halide perovskite nanocrystals (PNCs). However, the lack of understanding of the inner mechanism, especially for the state of the precursor and the crystallization process of the PNCs, hinders further development of this technique. Here, through systematic study of the Pb precursor and in situ characterization of the PNCs, it is revealed that the reverse micelle nature of the Pb precursor exactly creates a novel demulsification-crystallization (D-C) model, namely, a two-stage nucleation is divided by a demulsification process for the PNCs. On this basis, a top efficiency for green light-emitting diodes based on PNCs is obtained with a maximum external quantum efficiency of 22.5% through tailoring the D-C model using a multiple-acid-anion synergistic assisted strategy to obtain high-quality PNCs. Beyond the high efficiency, the work paves the way for diverse ideas in PNC synthesis.
RESUMO
Achieving high-performance perovskite light-emitting diodes (PeLEDs) with pure-red electroluminescence for practical applications remains a critical challenge because of the problematic luminescence property and spectral instability of existing emitters. Herein, high-efficiency Rec. 2020 pure-red PeLEDs, simultaneously exhibiting exceptional brightness and spectral stability, based on CsPb(Br/I)3 perovskite nanocrystals (NCs) capping with aromatic amino acid ligands featuring cation-π interactions, are reported. It is proven that strong cation-π interactions between the PbI6 -octahedra of perovskite units and the electron-rich indole ring of tryptophan (TRP) molecules not only chemically polish the imperfect surface sites, but also markedly increase the binding affinity of the ligand molecules, leading to high photoluminescence quantum yields and greatly enhanced spectral stability of the CsPb(Br/I)3 NCs. Moreover, the incorporation of small-size aromatic TRP ligands ensures superior charge-transport properties of the assembled emissive layers. The resultant devices emitting at around 635 nm demonstrate a champion external quantum efficiency of 22.8%, a max luminance of 12â¯910 cd m-2 , and outstanding spectral stability, representing one of the best-performing Rec. 2020 pure-red PeLEDs achieved so far.
RESUMO
Optical modeling based on the transfer matrix method is employed to investigate the performance of the organic planar heterojunction solar cell with rubrene/C70 as the active layer. The detailed investigation is directed into the effects of layer thickness of the rubrene and C70 on the total absorbed photon density in the active layer. It is revealed that the optical interference plays important role in the performance of the device and the optimal device performance is achieved when the thicknesses of the rubrene and C70 are set as 33 and 28 nm. The simulated results are also confirmed by the experimental data.
RESUMO
The power conversion efficiency (PCE) of solution-processed CdTe nanocrystals (NCs) solar cells has been significantly promoted in recent years due to the optimization of device design by advanced interface engineering techniques. However, further development of CdTe NC solar cells is still limited by the low open-circuit voltage (Voc) (mostly in range of 0.5-0.7 V), which is mainly attributed to the charge recombination at the CdTe/electrode interface. Herein, we demonstrate a high-efficiency CdTe NCs solar cell by using organic polymer poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) as the hole transport layer (HTL) to decrease the interface recombination and enhance the Voc. The solar cell with the architecture of ITO/ZnO/CdS/CdSe/CdTe/PTAA/Au was fabricated via a layer-by-layer solution process. Experimental results show that PTAA offers better back contact for reducing interface resistance than the device without HTL. It is found that a dipole layer is produced between the CdTe NC thin film and the back contact electrode; thus the built-in electric field (Vbi) is reinforced, allowing more efficient carrier separation. By introducing the PTAA HTL in the device, the open-circuit voltage, short-circuit current density and the fill factor are simultaneously improved, leading to a high PCE of 6.95%, which is increased by 30% compared to that of the control device without HTL (5.3%). This work suggests that the widely used PTAA is preferred as the excellent HTL for achieving highly efficient CdTe NC solar cells.
RESUMO
Organic solar cells (OSCs) have been widely studied due to the advantages of easy fabrication, low cost, light weight, good flexibility and sufficient transparency. In this work, flexible and semitransparent OSCs were successfully fabricated with the adoption of both polyimide/silver nanowires (PI/AgNW) and a conducting polymer PEDOT:PSS named PH1000 as the transparent conductive electrodes (TCEs). It is demonstrated that PI/AgNW is more suitable as a cathode rather than an anode in the viewpoint of its work function, photovoltaic performance, and simulations of optical properties. It is also found that the light incidence from PH1000 TCE can produce more plasmonic-enhanced photon absorption than the PI/AgNW electrode does, resulting in more high power conversion efficiency. Moreover, a high light transmittance of 33.8% and a decent efficiency of 3.88% are achieved for the whole all-flexible semitransparent device with only 9% decrease of resistance in PI/AgNW after 3000 bending cycles. This work illustrates that PI/AgNW has great potential and bright prospect in large-area OSC applications in the future.
RESUMO
In this paper, a Mg-doped ZnO (MZO) thin film is prepared by a simple solution process under ambient conditions and is used as the window layer for PbS solar cells due to a wide n-type bandgap. Moreover, a thin layer of ZnO nanocrystals (NCs) was deposited on the MZO to reduce carrier recombination at the interface for inverted PbS quantum dot solar cells with the configuration Indium Tin Oxides (ITO)/MZO/ZnO NC (w/o)/PbS/Au. The effect of film thickness and annealing temperature of MZO and ZnO NC on the performance of PbS quantum dot solar cells was investigated in detail. It was found that without the ZnO NC thin layer, the highest power conversion efficiency(PCE) of 5.52% was obtained in the case of a device with an MZO thickness of 50 nm. When a thin layer of ZnO NC was introduced between MZO and PbS quantum dot film, the PCE of the champion device was greatly improved to 7.06% due to the decreased interface recombination. The usage of the MZO buffer layer along with the ZnO NC interface passivation technique is expected to further improve the performance of quantum dot solar cells.
RESUMO
Solution-processed CdTe semiconductor nanocrystals (NCs) have exhibited astonishing potential in fabricating low-cost, low materials consumption and highly efficient photovoltaic devices. However, most of the conventional CdTe NCs reported are synthesized through high temperature microemulsion method with high toxic trioctylphosphine tellurite (TOP-Te) or tributylphosphine tellurite (TBP-Te) as tellurium precursor. These hazardous substances used in the fabrication process of CdTe NCs are drawing them back from further application. Herein, we report a phosphine-free method for synthesizing group II-VI semiconductor NCs with alkyl amine and alkyl acid as ligands. Based on various characterizations like UV-vis absorption (UV), transmission electron microscope (TEM), and X-ray diffraction (XRD), among others, the properties of the as-synthesized CdS, CdSe, and CdTe NCs are determined. High-quality semiconductor NCs with easily controlled size and morphology could be fabricated through this phosphine-free method. To further investigate its potential to industrial application, NCs solar cells with device configuration of ITO/ZnO/CdSe/CdTe/Au and ITO/ZnO/CdS/CdTe/Au are fabricated based on NCs synthesized by this method. By optimizing the device fabrication conditions, the champion device exhibited power conversion efficiency (PCE) of 2.28%. This research paves the way for industrial production of low-cost and environmentally friendly NCs photovoltaic devices.
RESUMO
Perovskite light-emitting diodes (PeLEDs) have recently shown significant progress with external quantum efficiencies (EQEs) exceeding 20%. However, PeLEDs with pure-red (620-660 nm) light emission, an essential part for full-color displays, remain a great challenge. Herein, a general approach of spacer cation alloying is employed in Ruddlesden-Popper perovskites (RPPs) for efficient red PeLEDs with precisely tunable wavelengths. By simply tuning the alloying ratio of dual spacer cations, the thickness distribution of quantum wells in the RPP films can be precisely modulated without deteriorating their charge-transport ability and energy funneling processes. Consequently, efficient PeLEDs with tunable emissions between pure red (626 nm) and deep red (671 nm) are achieved with peak EQEs up to 11.5%, representing the highest values among RPP-based pure-red PeLEDs. This work opens a new route for color tuning, which will spur future developments of pure-red or even pure-blue PeLEDs with high performance.
RESUMO
The ternary polymerization strategy of incorporating different donor and acceptor units forming terpolymers as photovoltaic materials has been proven advantageous in improving power conversion efficiencies (PCEs) of polymer solar cells (PSCs). Herein, a series of low band gap nonconjugated terpolymer acceptors based on two different fused-ring electron-deficient building blocks (IDIC16 and ITIC) with adjustable photoelectric properties were developed. As the third component, ITIC building blocks with a larger π-conjugation structure, shorter solubilizing side chains, and red-shifted absorption spectrum were incorporated into an IDIC16-based nonconjugated copolymer acceptor PF1-TS4, which built up the terpolymers with two conjugated building blocks linked by flexible thioalkyl chain-thiophene segments. With the increasing ITIC content, terpolymers show gradually broadened absorption spectra and slightly down-shifted lowest unoccupied molecular orbital levels. The active layer based on terpolymer PF1-TS4-60 with a 60% ITIC unit presents more balanced hole and electron mobilities, higher photoluminescence quenching efficiency, and improved morphology compared to those based on PF1-TS4. In all-polymer solar cells (all-PSCs), PF1-TS4-60, matched with a wide band gap polymer donor PM6, achieved a similar open-circuit voltage (Voc) of 0.99 V, a dramatically increased short-circuit current density (Jsc) of 15.30 mA cm-2, and fill factor (FF) of 61.4% compared to PF1-TS4 (Voc = 0.99 V, Jsc = 11.21 mA cm-2, and FF = 55.6%). As a result, the PF1-TS4-60-based all-PSCs achieved a PCE of 9.31%, which is â¼50% higher than the PF1-TS4-based ones (6.17%). The results demonstrate a promising approach to develop high-performance nonconjugated terpolymer acceptors for efficient all-PSCs by means of ternary polymerization using two different A-D-A-structured fused-ring electron-deficient building blocks.
RESUMO
CsPbI3 perovskite nanocrystals (NCs) have recently emerged as promising materials for optoelectronic devices because of their superior properties. However, the poor stability of the CsPbI3 NCs induced by easy ligand desorption represents a key issue limiting their practical applications. Herein, we report stable and highly luminescent black-phase CsPbI3 NCs passivated by novel ligands of sodium dodecyl sulfate (SDS). Theoretical calculation results reveal a stronger adsorption energy of SDS molecules at the CsPbI3 surface than that of commonly used oleic acid. As a result, the defect formation caused by the ligand loss during the purification process is greatly suppressed. The optimized SDS-CsPbI3 NCs exhibit significantly reduced surface defects, much enhanced stability, and superior photoluminescence efficiency. The red perovskite light-emitting diodes based on the SDS-CsPbI3 NCs demonstrate an external quantum efficiency of 8.4%, which shows a 4-fold improvement compared to the devices based on the oleic acid-modified CsPbI3 NCs.
RESUMO
How to simultaneously achieve both high open-circuit voltage (Voc ) and high short-circuit current density (Jsc ) is a big challenge for realising high power conversion efficiency (PCE) in all-small-molecule organic solar cells (all-SM OSCs). Herein, a novel small molecule (SM)-donor, namely FYSM-SiCl, with trialkylsilyl and chlorine substitutions was designed and synthesized. Compared to the original SM-donor FYSM-H, FYSM-Si with trialkylsilyl substitution showed a decreased crystallinity and lower highest occupied molecular orbital (HOMO) level, while FYSM-SiCl had an improved crystallinity, more ordered packing arrangement, significantly lower HOMO level, and predominant "face-on" orientation. Matched with a SM-acceptor Y6, the FYSM-SiCl-based all-SM OSCs exhibited both high Voc of 0.85â V and high Jsc of 23.7â mA cm-2 , which is rare for all-SM OSCs and could be attributed to the low HOMO level of FYSM-SiCl donor and the delicate balance between high crystallinity and suitable blend morphology. As a result, FYSM-SiCl achieved a high PCE of 13.4 % in all-SM OSCs, which was much higher than those of the FYSM-H- (10.9 %) and FYSM-Si-based devices (12.2 %). This work demonstrated a promising method for the design of efficient SM-donors by a side-chain engineering strategy via the introduction of trialkylsilyl and chlorine substitutions.