Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields.

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

Nanocellulose for Sustainable Water Purification.

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Evaluation, optimization study, and life cycle assessment of novel eco-friendly PVA-based nanocomposite hydrogel adsorbents for methylene blue and paracetamol removal.

In this study, an eco-friendly and novel hydrogel based on a crosslinked polyvinyl alcohol (PVA), iota carrageenan (IC) and polyvinylpyrrolidone (PVP) scaffold, containing a large amount (10-50 wt%) of nanoscale palm fronds (NPF) as additives, for water purification was demonstrated. A life cycle assessment (LCA) findings on NPF as biomass waste incorporated into PVA_PVP_IC polymer matrix was presented, and the results highlight the necessity of focused actions to reduce environmental impact and support the palm waste utilization in a sustainable manner. The multicomponent nanocomposite hydrogels were examined as adsorbents in a system work in batches for methylene blue (MB) and paracetamol (PCT) removal. The results show that, the presence of NPF, which dispersed in the hydrogel PVA_PVP_IC scaffolds containing both covalent and non-covalent cross-linking bonds, greatly enhanced the MB and PCT adsorption efficiency. A response surface methodology (RSM) model was used to find the best operating parameters of contaminant adsorption, including time, adsorbent dose, and starting concentration of pollutants. By using this statistical model, it was found that the optimal conditions for the adsorption reaction to achieve the complete removal of MB are 66.7 h adsorption time duration, 98.5 mg L-1 starting concentration, and an adsorbent dose of 5.9 mg, while for the complete removal of PCT, it is 57.6 h adsorption time duration, 80 mg L-1 starting concentration, and an adsorbent dose of 6 mg. The reusability of the nanocomposite hydrogels were tested for 5 cycles, all showed high adsorption capacity, indicating the potential for practical application of this nanocomposite hydrogel system. This study indicates that the prepared nanocomposite hydrogel raises the standard used for treatment of wastewater and also gives a solution to protect the environment and mitigate global warming.

Sustainable Plant-Based Biopolymer Membranes for PEM Fuel Cells.

Carboxycellulose nanofibers (CNFs) promise to be a sustainable and inexpensive alternative material for polymer electrolyte membranes compared to the expensive commercial Nafion membrane. However, its practical applications have been limited by its relatively low performance and reduced mechanical properties under typical operating conditions. In this study, carboxycellulose nanofibers were derived from wood pulp by TEMPO oxidation of the hydroxyl group present on the C6 position of the cellulose chain. Then, citric acid cross-linked CNF membranes were prepared by a solvent casting method to enhance performance. Results from FT-IR spectroscopy, 13C NMR spectroscopy, and XRD reveal a chemical cross-link between the citric acid and CNF, and the optimal fuel cell performance was obtained by cross-linking 70 mL of 0.20 wt % CNF suspension with 300 µL of 1.0 M citric acid solution. The membrane electrode assemblies (MEAs), operated in an oxygen atmosphere, exhibited the maximum power density of 27.7 mW cm-2 and the maximum current density of 111.8 mA cm-2 at 80 °C and 100% relative humidity (RH) for the citric acid cross-linked CNF membrane with 0.1 mg cm-2 Pt loading on the anode and cathode, which is approximately 30 times and 22 times better, respectively, than the uncross-linked CNF film. A minimum activation energy of 0.27 eV is achieved with the best-performing citric acid cross-linked CNF membrane, and a proton conductivity of 9.4 mS cm-1 is obtained at 80 °C. The surface morphology of carboxycellulose nanofibers and corresponding membranes were characterized by FIB/SEM, SEM/EDX, TEM, and AFM techniques. The effect of citric acid on the mechanical properties of the membrane was assessed by tensile strength DMA.

Lamellar crystal-dominated surfaces of polymer films achieved via melt stretching-induced free surface crystallization.

Lamellar crystal-dominated (LCD) surfaces hold great superiority and broad prospects in polymer surface engineering. The key to this is avoiding the formation of an amorphous phase in the interlamellar region. Here we give a first report of achieving LCD surfaces of polyethylene films via melt stretching-induced free surface crystallization. We demonstrate that the resultant surface is constructed directly by orientated and edge-on lamellae within a surface depth of tens to hundreds of nanometers, while the normally existing amorphous phase is avoided. The crystallization-driven formation of the LCD surface has been ascribed to the heterogeneous chain dynamics of a melt free surface, that is, high chain mobility, low viscosity and loose chain entanglement, which facilitates the complete chain disentanglement during crystallization. In addition, we confirm that the surface morphology is controllable with respect to lamellar orientation, spacing and depth by changing the melt stretching strain or quenching the deformed melt. Meanwhile, owing to a possible kinetics competition between crystallization and chain disentanglement, the structural spacing of surface lamellae holds a positive correlation with the lamellar depth. Since free surface effects are immanent in polymer materials, the currently proposed melt processing strategy is demonstrated to be transferable to other semicrystalline polymers.

Sustainable carboxylated cellulose filters for efficient removal and recovery of lanthanum.

Carboxylated cellulose filters were fabricated by oxidation of a cellulose fibrous mat via TEMPO-mediated oxidation. These carboxylated cellulose filters were employed as sustainable filters for removal and recovery of lanthanum ions (La (III)) with high adsorption capability. The surface chemistry of the carboxylated cellulose fibers before and after adsorption of La (III) was investigated systematically. The distribution of La (III) on carboxylated cellulose fibers were explored by EDX mapping approach, which revealed that the adsorption occurred on both the surface and the internal structure of the cellulose fibers. The kinetics and isotherms of the adsorption were conducted to understand the adsorption mechanism of the carboxylated cellulose filter and to learn the maximum adsorption capacity for La (III) which was as high as 33.7 mg/g. The adsorption selectivity of the carboxylated cellulose filter for La (III) was determined when interfering ions including mono- and di-covalent ions were involved. The carboxylated cellulose filter exhibited high adsorption capability and high permeation flux evidenced by the breakthrough curves of the dynamic adsorption of La (III) under an extremely low pressure of 0.07 kPa. A variety of desorption reagents were selected to recover lanthanum from the carboxylated cellulose filter, where the optimized conditions for recovery were explored. Finally, a spiral wound cartridge of the carboxylated cellulose fibrous mat was fabricated and the removal and the recovery of La (III, 2.5 ppm) from massive lanthanum-containing water were demonstrated. It was very impressive that the high rejection ratio of 94.3% was achieved under the low pressure drop of 3.0 kPa remaining throughout the separation process, and the treated solution volume was high up to 21.4 L, which was about six-times higher than that of commercially available nanofibrous adsorption membranes, indicating that the carboxylated cellulose filter could be used as a highly efficient adsorption medium for industrial recovery of rare earth metals.

A Simple Approach to Prepare Carboxycellulose Nanofibers from Untreated Biomass.

A simple approach was developed to prepare carboxycellulose nanofibers directly from untreated biomass using nitric acid or nitric acid-sodium nitrite mixtures. Experiments indicated that this approach greatly reduced the need for multichemicals, and offered significant benefits in lowering the consumption of water and electric energy, when compared with conventional multiple-step processes at bench scale (e.g., TEMPO oxidation). Additionally, the effluent produced by this approach could be efficaciously neutralized using base to produce nitrogen-rich salts as fertilizers. TEM measurements of resulting nanofibers from different biomasses, possessed dimensions in the range of 190-370 and 4-5 nm, having PDI = 0.29-0.38. These nanofibers exhibited lower crystallinity than untreated jute fibers as determined by TEM diffraction, WAXD and 13C CPMAS NMR (e.g., WAXD crystallinity index was ∼35% for nanofibers vs 62% for jute). Nanofibers with low crystallinity were found to be effective for removal of heavy metal ions for drinking water purification.

A Criterion for Flow-Induced Oriented Crystals in Isotactic Polypropylene under Pressure.

Flow-induced oriented crystals have attracted considerable attention because they significantly increase stiffness and strength of polymer products. Naturally, understanding the necessary condition of forming oriented crystals is of importance for both industry and polymer physics. Following the concept of specific work of flow proposed by Mykhaylyk and co-workers, the expression of the specific work of flow, w (T,P) , was carefully summarized and verified that when w (T,P) is above a critical specific work of flow, w c(T,P) = (1.7 ± 0.7) × 107 J m-3 , oriented crystals in isotactic polypropylene can be induced by flow at pressures (50, 100, and 150 MPa) and at a undercooling of 65 K. The influences of pressure on w c(T,P) stem from two facets: one is the influence on the melt viscosity (the Barus law), and the other one is the influence on the equilibrium melting temperature (the Clapeyron equation). The current study can guide real processing to fabricate high-performance polymer products with oriented crystals.

Large Scale Production of Continuous Hydrogel Fibers with Anisotropic Swelling Behavior by Dynamic-Crosslinking-Spinning.

Hydrogel microfibers have been considered as a potential biomaterial to spatiotemporally biomimic 1D native tissues such as nerves and muscles which are always assembled hierarchically and have anisotropic response to external stimuli. To produce facile hydrogel microfibers in a mathematical manner, a novel dynamic-crosslinking-spinning (DCS) method is demonstrated for direct fabrication of size-controllable fibers from poly(ethylene glycol diacrylate) oligomer in large scale, without microfluidic template and in a biofriendly environment. The diameter of fibers can be precisely controlled by adjusting the spinning parameters. Anisotropic swelling property is also dependent on inhomogeneous structure generated in spinning process. Comparing with bulk hydrogels, the resulting fibers exhibit superior rapid water adsorption property, which can be attributed to the large surface area/volume ratio of fiber. This novel DCS method is one-step technology suitable for large-scale production of anisotropic hydrogel fibers which has a promising application in the area such as biomaterials.

Exploring the nature of cellulose microfibrils.

Ultrathin cellulose microfibril fractions were extracted from spruce wood powder using combined delignification, TEMPO-catalyzed oxidation, and sonication processes. Small-angle X-ray scattering of these microfibril fractions in a "dilute" aqueous suspension (concentration 0.077 wt %) revealed that their shape was in the form of nanostrip with 4 nm width and only about 0.5 nm thicknesses. These dimensions were further confirmed by TEM and AFM measurements. The 0.5 nm thickness implied that the nanostrip could contain only a single layer of cellulose chains. At a higher concentration (0.15 wt %), SAXS analysis indicated that these nanostrips aggregated into a layered structure. The X-ray diffraction of samples collected at different preparation stages suggested that microfibrils were delaminated along the (11̅0) planes from the Iß cellulose crystals. The degree of oxidation and solid-state (13)C NMR characterizations indicated that, in addition to the surface molecules, some inner molecules of microfibrils were also oxidized, facilitating the delamination into cellulose nanostrips.