Ultrasonographic Study of the Submandibular Gland for Botulinum Neurotoxin Injection.

BACKGROUND: Hypertrophied submandibular glands provide a bulky contour to the lower face. Botulinum neurotoxin injection methods are commonly used for facial contouring; however, no studies have suggested injection points because of the lack of delicate anatomical information on the submandibular gland. OBJECTIVE: The aim of this study was to determine the optimal injection site for botulinum neurotoxin injections in the submandibular gland. MATERIALS AND METHODS: Anatomical considerations when injecting botulinum neurotoxin into the submandibular gland were determined using ultrasonography. The thickness of the submandibular gland, its depth from the skin surface, and the location of the vascular bundle were observed bilaterally in 42 participants. Two cadavers were dissected to measure the location of the submandibular gland corresponding to the ultrasonographic observation. RESULTS: The thickest part of the submandibular gland measured 11.12 ± 2.46 in width with a depth of 4.63 ± 0.76. At the point where it crosses the line of the lateral canthus, it measured 5.53 ± 1.83 in width and 8.73 ± 1.64 in depth. CONCLUSION: The authors suggest optimal injection sites based on external anatomical landmarks. These guidelines aim to maximize the effects of botulinum neurotoxin therapy by minimizing its deleterious effects, which can be useful in clinical settings.

Sihler's staining technique: How to and guidance for botulinum neurotoxin injection in human muscles.

The Sihler's stain is a whole-mount nerve staining technique that allows visualization of the nerve distribution and permits mapping of the entire nerve supply patterns of the organs, skeletal muscles, mucosa, skin, and other structures that contain myelinated nerve fibers. Unlike conventional approaches, this technique does not require extensive dissection or slide preparation. To date, the Sihler's stain is the best tool for demonstrating the precise intramuscular branching and distribution patterns of skeletal muscles. The intramuscular neural distribution is used as a guidance tool for the application of botulinum neurotoxin injections. In this review, we have identified and summarized the ideal botulinum neurotoxin injection points for several human tissues.

Sonoanatomy of injecting botulinum neurotoxin into the facial muscles.

INTRODUCTION: Ultrasonography (US) has become an essential tool for guiding botulinum neurotoxin (BoNT) injections in facial muscles, enhancing precision and safety. This narrative review explores the role of US in BoNT administration, particularly in complex anatomical regions, highlighting its impact on treatment customization, real-time visualization, and complication reduction. MATERIALS AND METHODS: A comprehensive literature search was conducted using PubMed, MEDLINE, Embase, and Cochrane Library for articles published from January 2018 to December 2023. Search terms included "Botulinum neurotoxin," "facial anatomy," "ultrasonography guided injection," and "facial muscle sonoanatomy." Studies focusing on US-guided BoNT injections in facial muscles were included. Data extraction and synthesis were performed independently by two reviewers, focusing on study design, ultrasonography techniques, outcomes, and conclusions. RESULTS: The review found that US guidance significantly enhances the precision of BoNT injections by providing real-time visualization of facial muscles and blood vessels, thereby reducing the risk of adverse events. US enables tailored injection strategies, ensuring symmetrical facial expressions and minimizing over-treatment. The technique also offers immediate feedback, allowing for on-the-spot adjustments to improve treatment efficacy and safety. However, the review identified limitations, including potential selection bias and variability in US techniques across different studies. CONCLUSION: US guidance for BoNT injections into facial muscles offers substantial benefits in terms of precision, safety, and treatment customization. Despite the identified limitations, the integration of US into clinical practice is poised to enhance patient outcomes in aesthetic and therapeutic procedures. Further research is needed to standardize US techniques and broaden the inclusivity of studies to validate these findings comprehensively.

Anatomy of the temporal region to guide filler injections.

Hollow temples are not typically considered aesthetically pleasing, and hollowness worsens with the aging process. When filling this region with fillers, there are several anatomical considerations, with injection techniques varying depending on the layer targeted. Specifically, injections between the superficial temporal fascia and the superficial layer of the deep temporal fascia are performed using a cannula, while periosteal layer injections involve the use of a needle to reach the bone before inserting fillers. Detailed anatomical insights encompass the boundaries of the temporal fossa and cautionary notes regarding blood vessels, supported by specific studies on veins and arteries in the temporal region. Complications, including vessel injuries, are discussed alongside an exploration of various injection techniques. This review provides a comprehensive exploration of anatomical considerations and the specific methodologies employed in temple augmentation with fillers.

Sihler's staining of the anterior belly of digastric muscle for botulinum toxin injection.

PURPOSE: The anterior belly of the digastric muscle (ABDM) is the target of botulinum toxin injection; however, anatomical considerations related to the injection point are absent. This study used Sihler's staining to analyze the intramuscular nerve distribution of ABDM to identify the most effective botulinum toxin injection points. METHODS: We used 12 specimens from 6 embalmed cadavers in this study. The specimens were manually dissected to preserve the mylohyoid nerve and subjected to Sihler's staining. From the gnathion to and hyoid bone, the ABDM was divided into three equal parts, distinguishing the anterior, middle, and posterior thirds. RESULTS: Only a branch of the mylohyoid nerve entered the ABDM, and its entry point was located in the middle-third region in all cases. The nerve endings were concentrated in the middle third (100%), followed by the anterior third (58.3%) and were not observed in the posterior third. CONCLUSION: The landmarks used in this study (gnathion and hyoid bone) are easily palpable on the skin surface, allowing clinicians to target the most effective injection site (middle third of ABDM). These results provide scientific and anatomic evidence for injection points, and will aid in the management of ABDM injection procedures in clinical practice.

Anatomical Considerations for the Injection of Botulinum Neurotoxin in Shoulder and Arm Contouring.

The utilization of botulinum neurotoxin in the field of body contouring is on the rise. Body contouring procedures typically focus on specific muscle groups such as the superior trapezius, deltoid, and lateral head of the triceps brachii. The authors propose identifying optimal injection sites for botulinum neurotoxin to achieve desired aesthetic contouring of the shoulders and arms. The authors conducted a modified Sihler's staining method on specimens of the superior trapezius, deltoid, and lateral head of the triceps brachii muscles, totaling 16, 14, and 16 specimens, respectively. The neural distribution exhibited the most extensive branching patterns within the horizontal section (between 1/5 and 2/5) and the vertical section (between 2/4 and 4/4) of the superior trapezius muscle. In the deltoid muscle, the areas between the anterior and posterior deltoid bellies, specifically within the range of the horizontal 1/3 to 2/3 lines, showed significant intramuscular arborization. Furthermore, the middle deltoid muscle displayed arborization patterns between 2/3 and the axillary line. Regarding the triceps brachii muscle, the lateral heads demonstrated arborization between 4/10 and 7/10. The authors recommend targeting these regions, where maximum arborization occurs, as the optimal and safest points for injecting botulinum toxin.

Anatomical proposal for hyaluronic acid filler injection in subzygomatic arch depression: A dual-plane injection technique.

A subzygomatic arch depression creates a bulky face outline. To smoothen these depressions and correct facial contours, hyaluronic acid filler injection methods are frequently used. However, the complexity of the subzygomatic region make it difficult for practitioners to effectively volume the region. The conventional injection of single layer injection has limitations of lack in volume addition and unwanted undulations and spreading. The anatomical factors were reviewed with ultrasonography, three-dimensional photogrammetric analysis, and cadaver dissection. In this anatomical study, the present knowledge on localizing filler injection with a more precisely demarcated dual-plane injection was suggested. This study presents novel anatomical findings related to the injection of hyaluronic acid filler injection in the subzygomatic arch depression.

Face painting as an anatomical learning tool based on individual ultrasonographic examination.

Considering the shift to online education during the COVID-19 pandemic, new and easily accessible educational videos and content on clinical anatomy are necessary. This study utilized numerous references and data on the anatomy of Asian facial muscles and blood vessels to accurately depict human anatomy through face painting. It aimed to provide clinicians accurate educational video content on anatomy to help prevent possible complications during noninvasive facial and surgical procedures. A 26-year-old Korean-Chinese male volunteer was used as a face painting model. The location of the blood vessels of the face was confirmed through ultrasonography images using a real-time two-dimensional B-mode. The model's face was painted by an artist majoring in anatomy. To reveal most anatomical structures on both sides of the face, the left side showed the structures observed when the skin and superficial fat layer are removed, and the right side revealed the deeper layer structures that can be seen when some muscles are cut. Fifteen superficial and deep muscles important in esthetic procedures were meticulously painted on the face. The face painting took a total of 6 h, and the video was edited to 5 min. This study merged the advantages of 2D and 3D by painting directly on the skin surface of a living model. Thus, it can provide more dynamic surface anatomy data. These contents inform clinicians about 3D anatomic location, which can help avoid complications when performing clinical procedures on the face.

Guidance in botulinum neurotoxin injection for lower extremity spasticity: Sihler's staining technique.

Spasticity is a motor disease characterized by a velocity-dependent acceleration in muscle tone or tonic stretch reflexes linked to hypertonia. Lower limb spasticity has been successfully treated with botulinum neurotoxin; however, the injection sites have not been generalized. Sihler's stain has been used to visualize intramuscular nerve distribution to guide botulinum neurotoxin injection. Sihler staining is a whole-mount nerve staining technique that allows visualization of nerve distribution and mapping of entire nerve supply patterns in skeletal muscle with hematoxylin-stained myelinated nerve fibers. This study reviewed and summarized previous lower extremity spasticity studies to determine the ideal injection site for botulinum neurotoxin.

Anatomical proposal of local anesthesia injection for median nerve block in treating hyperhidrosis with botulinum neurotoxin.

INTRODUCTION: Hyperhidrosis, causing excessive sweat, can be treated with Botulinum neurotoxin injection. Botulinum toxin, an effective and safe treatment for hyperhidrosis, unfortunately involves significant pain due to multiple injections. This study aims to propose a more efficient and less painful approach to nerve blocks for relief, by identifying optimal injection points to block the median nerve, thereby enhancing palmar hyperhidrosis treatment. METHODS: This study, involving 52 Korean cadaver arms (mean age 73.5 years), measured the location of the median nerve relative to the transverse line at the pisiform level to establish better nerve block injection sites. RESULTS: In between the extensor carpi radialis and palmaris longus, the median nerve was located at an average distance of 47.39 ± 6.43 mm and 29.39 ± 6.43 mm from the transverse line at the pisiform level. DISCUSSION: To minimize discomfort preceding the botulinum neurotoxin injection, we recommend the optimal injection site for local anesthesia to be located 4 cm distal to the transverse line of the pisiform, within the tendons of the palmaris longus and flexor carpi radialis muscles.

Botulinum neurotoxin injection in the deltoid muscle: application to cosmetic shoulder contouring.

BACKGROUND AND OBJECTIVES: This study describes the intramuscular nerve branching of the deltoid muscle in relation to shoulder surface anatomy, with the aim of providing essential information regarding the most appropriate sites for botulinum neurotoxin injection during shoulder line contouring. METHODS: The modified Sihler's method was used to stain the deltoid muscles (16 specimens). The intramuscular arborization areas of the specimens were demarcated using the marginal line of the muscle origin and the line connecting the anterior and posterior upper edges of the axillary region. RESULTS: The intramuscular neural distribution of the deltoid muscle had the greatest arborization patterns in the area between the horizontal 1/3 and 2/3 lines of the anterior and posterior deltoid bellies, and 2/3 to axillary line in middle deltoid bellies. The greatest part of the posterior circumflex artery and axillary nerve ran below the areas with the highest aborizations. CONCLUSION: We propose that botulinum neurotoxin injections should be administered in the area between the 1/3 and 2/3 lines of the anterior and posterior deltoid bellies, and 2/3 to axillary line on middle deltoid bellies. Accordingly, clinicians will ensure minimal dose injections and fewer adverse effects of the botulinum neurotoxin injection. Deltoid intramuscular injections, such as vaccines and trigger point injections, should ideally be adapted according to our results.

Sonoanatomy of the platysmal bands: What causes the platysmal band?

BACKGROUND: The platysmal band is created by the platysma muscle, a thin superficial muscle that covers the entire neck and the lower part of the face. The platysmal band appears at the anterior and posterior borders of the muscle. To date, no definite pathophysiology has been established. Here, we observed a lack of knowledge of the anatomy of the platysma muscle using ultrasonography in this study. METHODS: We conducted a descriptive, prospective study observing the platysmal band in resting and contraction states to reveal muscle changes. Twenty-four participants (aged 23-57 years) with anterior and posterior neck bands underwent ultrasonography in resting and contracted states. Ten cadavers were studied aged 67-85 years to measure the thickness of the platysma muscle at 12 points: horizontally (medial, middle, lateral) and vertically (inferior mandibular margin, hyoid bone, cricoid cartilage, superior margin of clavicle). RESULTS: The anterior and posterior borders of the platysma muscle were thicker than the middle of the platysma muscle when in a contracted state, and the muscle also had a convex shape when contracted. The thickness of the platysma muscle was not significantly different over 12 points in the resting state. During contraction, the platysma muscles contracted in the medial and lateral margins of the muscle, which was more significant in the posterior bands. CONCLUSION: The anterior and posterior platysmal bands are related to muscle thickness during contraction. These observations support the change in platysmal band treatment only at the anterior and posterior border of the muscle.

A standardized protocol for needle placement in the infraspinatus muscle: an anatomical perspective.

PURPOSE: This study aimed to evaluate the morphology of the three parts of the infraspinatus muscle based on surface landmarks for precise and effective access, and to propose the most effective fine-wire electrode insertion technique and sites. METHODS: Fifteen Asian fresh cadavers were used. We investigated the probability of the presence of the superior, middle, and inferior parts in each infraspinatus muscle based on surface landmarks. Based on the positional characteristics of the muscle, we determined the needle insertion method and confirmed its effectiveness by dissection. RESULTS: The superior part was mostly observed near the spine of the scapula. The middle part was broadly observed within the infraspinous fossa. The inferior part showed variable location within the infraspinous fossa. The injection accuracy of the superior, middle, and inferior parts in the infraspinatus muscle was 95.8%, 100%, and 91.7%, respectively. Targeting the superior and middle parts for injection of the infraspinatus muscle is relatively more straightforward than targeting the inferior part. Targeting the inferior part of the infraspinatus muscle in this study was more challenging than targeting the superior and middle parts. CONCLUSION: Needling for electromyography should be performed with special care to avoid unintended muscle parts, which could lead to inaccurate data acquisition and affect the conclusions about muscle function.

Guidance to trigger point injection for treating myofascial pain syndrome: Intramuscular neural distribution of the quadratus lumborum.

Postural habits and repetitive motion contribute toward the progress of myofascial pain by affecting overload on specific muscles, the quadratus lumborum (QL) muscle being the most frequently involved. The therapy of myofascial pain syndrome includes the release of myofascial pain syndrome using injective agents such as botulinum neurotoxin, lidocaine, steroids, and normal saline. However, an optimal injection point has not been established for the QL muscle. This study aimed to propose an optimal injection point for this muscle by studying its intramuscular neural distribution using the whole mount staining method. A modified Sihler's procedure was completed on 15 QL muscles to visualize the intramuscular arborization areas in terms of the inferior border of the 12th rib, the transverse processes of L1-L4, and the iliac crest. The intramuscular neural distribution of the QL had the densely arborized areas in the three lateral portions of L3-L4 and L4-L5 and the medial portion between L4 and L5.

Guidelines for botulinum neurotoxin injections in piriformis syndrome.

BACKGROUND: The piriformis muscle is normally involved in piriformis syndrome and can be treated with botulinum neurotoxin using several different injection methods. However, definitive injection guidelines for the muscle have not been reported previously. AIMS: This study aimed to determine the ideal area for injections based on the intramuscular nerve distribution as obtained using a modified Sihler's staining technique. MATERIALS AND METHODS: A modified Sihler's method was applied to the piriformis muscle in 15 specimens. The intramuscular arborization areas were identified based on two anatomical landmarks: (a) the lateral border of the sacrum bone and (b) the greater trochanter. RESULTS: The nerve entry point for both piriformis muscles was found in the area between the lateral border of the sacrum and one-fifth of the distance toward the greater trochanter. The intramuscular nerve distribution for the piriformis muscle had the largest arborization patterns between one-fifth and two-fifths of the distance from the sacrum to the greater trochanter. The piriformis muscle was tendinous from two-fifths of the distance to the greater trochanter. DISCUSSION: This study has yielded suggested optimal injection locations for the piriformis muscle relative to external anatomical landmarks. CONCLUSION: Clinicians can use these guidelines to ensure the effectiveness of not only botulinum neurotoxin injections but also other agents such as steroids, anesthetics, and normal saline. These guidelines will also help to avoid adverse outcomes of injection treatments.

Anatomical locations of the motor endplates of sartorius muscle for botulinum toxin injections in treatment of muscle spasticity.

PURPOSE: This study aimed to detect the idyllic locations for botulinum neurotoxin injection by analyzing the intramuscular neural distributions of the sartorius muscles. METHODS: An altered Sihler's staining was conducted on sartorius muscles (15 specimens). The nerve entry points and intramuscular arborization areas were measured as a percentage of the total distance from the most prominent point of the anterior superior iliac spine (0%) to the medial femoral epicondyle (100%). RESULTS: Intramuscular neural distribution were densely detected at 20-40% and 60-80% for the sartorius muscles. The result suggests that the treatment of sartorius muscle spasticity requires botulinum neurotoxin injections in particular locations. CONCLUSIONS: These locations, corresponding to the locations of maximum arborization, are suggested as the most suggestive points for botulinum neurotoxin injection.

Do repetitive botulinum neurotoxin injections induce muscle fibrosis? Sonographic observation of the masseter muscle.

OBJECTIVE: In the esthetic field, the masseter muscle is commonly targeted by botulinum neurotoxin for facial contouring. However, multiple botulinum neurotoxin injections have been reported to cause muscle fibrosis. Ultrasonography can be useful for clinical consideration in such cases. MATERIALS AND METHODS: This study presents nine cases of masseteric fibrosis caused by repeated botulinum neurotoxin injections with ultrasonographic analysis of full and partial masseteric fibrosis. RESULTS: Repetitive botulinum neurotoxin injections resulted in reduced masseter muscle volume, which frequently appeared hyperechoic on ultrasonography. The hyperechoic region was mostly located in the deep and posterior portions; however, in some cases, it was observed throughout the muscle, including the superficial, deep, or both areas. CONCLUSION: The fibrotic masseter muscles appear hyperechoic, and ultrasonography is necessary to analyze the degree and location of fibrosis. Predictions can be made for cases in which botulinum neurotoxin injections may have less of an effect after ultrasonography. Because muscle fibrosis can be localized, it is necessary to confirm the degree and location of fibrosis before determining the effective area of injection. In clinical practice, muscle fibrosis may be visible in a specific area where blind injections are administered.

A practical guide to botulinum neurotoxin treatment of teres major muscle in shoulder spasticity: Intramuscular neural distribution of teres major muscle in cadaver model.

BACKGROUND: Botulinum neurotoxin treatment typically focuses on the teres major muscle as a primary target for addressing shoulder spasticity. The muscle is located deep within a large muscle group and optimal injection locations have not been identified. OBJECTIVE: To identify the preferred location for administering botulinum toxin injections in the teres major muscle. METHODS: Teres major specimens were removed from 18 cadaveric models and stained with Sihler's method to reveal the neural distribution within the muscle. The muscles were systematically divided into equal lengths from origin to insertion. The neural density in each section was evaluated to determine the location that would be likely to increase effectiveness of the injection. RESULTS: The greatest density of intramuscular nerve endings was located in the middle 20% of the muscle. The tendinous portion was observed at the ends of the muscle. CONCLUSIONS: The results suggest that botulinum neurotoxin should be delivered in the middle 20% of the teres major muscle.

Safe Zones for Facial Fillers: Anatomical Study of SubSMAS Spaces in Asians.

The study "Spaces of the Face for Filler Procedures: Identification of subSMAS Spaces Based on Anatomical Study" explores the anatomy of facial spaces crucial for safe and effective filler injections. By delineating the subSMAS (sub-superficial musculoaponeurotic system) spaces, this research highlights how these virtual compartments, bordered by fat, muscles, fascia, and ligaments, facilitate independent muscle movement and reduce the risk of damaging critical structures. The thicker and more robust skin of East Asians necessitates deeper filler injections, emphasizing the significance of accurately identifying these spaces. A cadaver study with dyed gelatin validated the existence and characteristics of these subSMAS spaces, confirming their safety for filler procedures. Key spaces, such as the subgalea-frontalis, interfascial and temporalis, and prezygomatic spaces, were examined, illustrating safe zones for injections. The findings underscore the importance of anatomical knowledge for enhancing facial aesthetics while minimizing complications. This study serves as a guide for clinicians to perform precise and safe filler injections, providing a foundation for further research on the dynamic interactions of these spaces and long-term outcomes.