RESUMO
Selenium (Se) discovered in 1817 belongs to the family of chalcogens. Surprisingly, despite the long history of over two centuries and the chemical simplicity of Se, the structure of amorphous Se (a-Se) remains controversial to date regarding the dominance of chains versus rings. Here, we find that vapor-deposited a-Se is composed of disordered rings rather than chains in melt-quenched a-Se. We further reveal that the main origin of this controversy is the facile transition of rings to chains arising from the inherent instability of rings. This transition can be inadvertently triggered by certain characterization techniques themselves containing above-bandgap illumination (above 2.1 eV) or heating (above 50 °C). We finally build a roadmap for obtaining accurate Raman spectra by using above-bandgap excitation lasers with low photon flux (below 1017 phs m-2 s-1) and below-bandgap excitation lasers measured at low temperatures (below -40 °C) to minimize the photoexcitation- and heat-induced ring-to-chain transitions.
RESUMO
The interfacial species-built local environments on Cu surfaces impact the CO2 electroreduction process significantly in producing value-added multicarbon (C2+) products. However, intricate interfacial dynamics leads to a challenge in understanding how these species affect the process. Herein, with ab initio molecular dynamics (AIMD) and finite element method (FEM) simulations, we reveal that the highly concentrated interfacial species, including the *CO, hydroxide, and K+, could synergistically promote the C-C coupling on the one-dimensional (1D) porous hollow structure regulated interfacial environment. The Cu-Ag tandem catalyst was then synthesized with the as-designed structure, exhibiting a high C2+ Faradaic efficiency of 76.0% with a partial current density of 380.0 mA cm-2 in near-neutral electrolytes. Furthermore, in situ Raman spectra validate that the 1D porous structure regulates the concentration of interfacial CO intermediates and ions to increase *CO coverage, local pH value, and ionic field, promoting the CO2-to-C2+ activity. These results provide insights into the design of practical ECR electrocatalysts by regulating interfacial species-induced local environments.
RESUMO
The highly localized Fe d orbital in ion phthalocyanine (FePc)-based molecular catalysts significantly hinders their electrocatalytic nitrogen reduction reaction (eNRR) performance. Herein, we theoretically designed a series of FePc-based molecules with adjacent metal phthalocyanine sites to form an asymmetric delocalized electronic structure on Fe centers, promoting the catalytic activity and lowering the overpotential of the eNRR, as well as suppressing the hydrogen evolution reaction (HER) side reaction.
RESUMO
Ir-based materials are still the benchmark catalysts for various reactions in acidic environment, but the high loading and low atom utilization limit their large-scale deployment. Herein, we report an effective strategy for implanting fully dispersed iridium-oxide atomic clusters onto hematite for boosting photoelectrochemical water oxidation in acidic solution. The resulting photoanode achieves a record-high photocurrent of 1.35 mA cm-2 at 1.23 V, corresponding to a mass activity of 172.70 A g-1 (3 times higher than electrodeposited control sample) and demonstrating the merits from the high atomic utilization of Ir. The systematically experimental and theoretical results reveal that the performance improvement correlates with the modulated electronic structure including the adjusted Fermi level and d-band center, which significantly enhances charge separation efficiency and promotes the conversion from intermediate *O into *OOH.
RESUMO
Tin halide perovskites (THPs) have demonstrated exceptional potential for various applications owing to their low toxicity and excellent optoelectronic properties. However, the crystallization kinetics of THPs are less controllable than its lead counterpart because of the higher Lewis acidity of Sn2+, leading to THP films with poor morphology and rampant defects. Here, a colloidal zeta potential modulation approach is developed to improve the crystallization kinetics of THP films inspired by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. After adding 3-aminopyrrolidine dihydro iodate (APDI2) in the precursor solution to change the zeta potential of the pristine colloids, the total interaction potential energy between colloidal particles with APDI2 could be controllably reduced, resulting in a higher coagulation probability and a lower critical nuclei concentration. In situ laser light scattering measurements confirmed the increased nucleation rate of the THP colloids with APDI2. The resulting film with APDI2 shows a pinhole-free morphology with fewer defects, achieving an impressive efficiency of 15.13 %.
RESUMO
The thermally stable inorganic cesium-based perovskites promise efficient and stable photovoltaics. Unfortunately, the strong ionic bonds lead to uncontrollable rapid crystallization, making it difficult in fabricating large-area black-phase film for photovoltaics. Herein, we developed a facile hydrogen-bonding assisted strategy for modulating the crystallization of CsPbI2 Br to achieve uniform large-area phase-pure films with much-reduced defects. The simple addition of methylamine acetate in precursors not only promotes the formation of intermediate phase via hydrogen bonding to circumvent the direct crystallization of CsPbI2 Br from ionic precursors but also widens the film processing window, thus enabling to fabricate large-area high-quality phase-pure CsPbI2 Br film under benign conditions. Combining with stable dopant-free poly(3-hexylthiophene), the CsPbI2 Br solar cells achieve the record-high efficiencies of 18.14 % and 16.46 % for 0.1â cm2 and 1â cm2 active area, respectively. The obtained high efficiency of 38.24 % under 1000â lux illumination suggests its potential in indoor photovoltaics for powering the Internet of Things, etc.
RESUMO
Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.
RESUMO
Passivating defects using organic halide salts, especially chlorides, is an effective method to improve power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) arising from the stronger Pb-Cl bonding than Pb-I and Pb-Br bonding. However, Cl- anions with a small radius are prone to incorporation into the perovskite lattice that distorts the lead halide octahedron, degrading the photovoltaic performance. Here, we substitute atomic-Cl-containing organic molecules for widely used ionic-Cl salts, which not only retain the efficient passivation by Cl but also prevent the incorporation of Cl into the bulk lattice, benefiting from the strong covalent bonding between Cl atoms and organic frameworks. We find that only when the distance of Cl atoms in single molecules matches well with the distance of halide ions in perovskites can such a configuration maximize the defect passivation. We thereby optimize the molecular configuration to enable multiple Cl atoms in an optimal spatial position to maximize their binding with surface defects. The resulting PSCs achieve a certified PCE of 25.02%, among the highest PCEs for PSCs, and retain 90% of their initial PCE after 500 h of continuous operation.
RESUMO
The alkaline hydrogen oxidation reaction (HOR) involves the coupling of adsorbed hydrogen (Had) and hydroxyl (OHad) species and is thus orders of magnitude slower than that in acid media. According to the Sabatier principle, developing electrocatalysts with appropriate binding energy for both intermediates is vital to accelerating the HOR though it is still challenging. Herein, we propose an unconventional bilateral compressive strained Ni-Ir interface (Ni-Ir(BCS)) as efficient synergistic HOR sites. Density functional theory (DFT) simulations reveal that the bilateral compressive strain effect leads to the appropriate adsorption for both Had and OHad, enabling their coupling thermodynamically spontaneous and kinetically preferential. Such Ni-Ir(BCS) is experimentally achieved by embedding sub-nanometer Ir clusters in graphene-loaded high-density Ni nanocrystals (Ni-Ir(BCS)/G). As predicted, it exhibits a HOR mass activity of 7.95 and 2.88 times those of commercial Ir/C and Pt/C together with much enhanced CO tolerance, respectively, ranking among the most active state-of-the-art HOR catalysts. These results provide new insights into the rational design of advanced electrocatalysts involving coordinated adsorption and activation of multiple reactants.
RESUMO
Metallic conductive 1T phase molybdenum sulfide (MoS2 ) has been identified as promising anode for sodium ion (Na+ ) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS2 layers assembled on single atomically dispersed Fe-N-C (SA Fe-N-C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe-N-C to 2H-MoS2 via the Fe-S bonds, which enhances the adsorption of Na+ by 2H-MoS2 , and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS2 with the ferromagnetic spin-polarization of SA Fe-N-C occurs during the sodiation/desodiation process, which significantly enhances the Na+ storage kinetics, and thus the 1T/2H MoS2 /SA Fe-N-C display a high electronic conductivity and a fast Na+ diffusion rate.
RESUMO
We report herein the in situ electrochemical scanning tunneling microscopy (ECSTM) study on the synergistic effect of Mg2+ in CO2 reduction reaction (CO2RR) catalyzed by cobalt phthalocyanine (CoPc). ECSTM measurement molecularly resolves the self-assembled CoPc monolayer on the Au(111) substrate. In the CO2 environment, high-contrast species are observed in the adlayer and assigned to the CO2 adsorption on CoPc. Furthermore, the contrast of the CO2-bound complex is higher in Mg2+-containing electrolytes than in Mg2+-free electrolytes, indicating the formation of the CoPc-CO2-Mg2+ complex. The surface coverage of adsorbed CO2 is positively correlated with the Mg2+ concentration as the additive in electrolytes up to a plateau of 30.8 ± 2.7% when c(Mg2+) > 30 mM. The potential step experiment indicates the higher CO2 adsorption dynamics in Mg2+-containing electrolytes than without Mg2+. The rate constants of CO2 adsorption and dissociation in different electrolytes are extracted from the data fitting of statistical results from in situ ECSTM experiments.
Assuntos
Microscopia de Tunelamento , Compostos Organometálicos , Microscopia de Tunelamento/métodos , Dióxido de Carbono , OuroRESUMO
Wide-bandgap semiconductors exhibiting a bandgap of â¼1.7-1.9 eV have generated great interest recently due to their important applications in tandem solar cells as top cells and emerging indoor photovoltaics. However, concerns about the stability and toxicity especially in indoor application limit the choice of these materials. Here we report a new member of this family, germanium monosulfide (GeS); this material displays a wide bandgap of 1.7 eV, nontoxic and earth-abundant constituents, and high stability. We find that the little success of GeS solar cells to date is primarily attributed to the challenge in fabricating high-quality polycrystalline GeS films, wherein the high thermal expansion coefficient (α = 3.1 × 10-5 K-1) combined with high crystallization temperature (375 °C) of GeS induces large tensile strain in the GeS film that peels off GeS from the substrate. By introducing a high-α buffer layer between GeS and substrate, we achieve a high-quality polycrystalline GeS thin film that compactly adheres to substrate with no voids. Solar cells fabricated by these GeS films show a power conversion efficiency of 1.36% under AM 1.5G illumination (100 mW cm-2). The unencapsulated devices are stable when stored in ambient atmosphere for 1500 h. Their efficiencies further increase to 3.6% under indoor illumination of 1000 lux.
RESUMO
ConspectusHydrogen is an ideal energy carrier and plays a critical role in the future energy transition. Distinct from steam reforming, electrochemical water splitting, especially powered by renewables, has been considered as a promising technique for scalable production of high-purity hydrogen with no carbon emission. Its commercialization relies on the reduction of electricity consumption and thus hydrogen cost, calling for highly efficient and cost-effective electrocatalysts with the capability of steadily working at high hydrogen output. This requires the electrocatalysts to feature (1) highly active intrinsic sites, (2) abundant accessible active sites, (3) effective electron and mass transfer, (4) high chemical and structural durability, and (5) low-cost and scalable synthesis. It should be noted that all these requirements should be fulfilled together for a practicable electrocatalyst. Much effort has been devoted to addressing one or a few aspects, especially improving the electrocatalytic activity by electronic modulation of active sites, while few reviews have focused on the synergistic modulation of these aspects together although it is essential for advanced electrochemical water splitting.In this Account, we will present recent innovative strategies with an emphasis on our solutions for synergistically modulating intrinsic active sites, electron transportation, mass transfer, and gas evolution, as well as mechanical and chemical durability, of non-precious-metal electrocatalysts, aiming for cost-effective and highly efficient water splitting. The following approaches for coupling these aspects are summarized for both cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). (1) Synergistic electronic modulations. The electronic structure of a catalytic site determines the adsorption/desorption of reactive intermediates and thus intrinsic activity. It can be tuned by heterogeneous doping, strain effect, spin polarization, etc. Coupling these effects to optimize the reaction pathways or target simultaneously the activity and stability would advance electrocatalytic performance. (2) Synergistic electronic and crystalline modulation. The crystallinity, crystalline phase, crystalline facets, crystalline defects, etc. affect both activity and stability. Coupling these effects with electronic modulation would enhance the activity together with stability. (3) Synergistic electronic and morphological modulation. It will focus on concurrently modulating electronic structure for improving the intrinsic activity and morphology for increasing accessible active sites, especially through single action or processing. The mass transfer and gas evolution properties can also be enhanced by morphological modulation to enable water splitting at large output. (4) Synergistic modulation of elementary reactions. Electrocatalytic reaction generally consists of a couple of elementary reactions. Each one may need a specific active site. Designing and combining various components targeting every elementary step on a space-limited catalyst surface will balance the intermediates and these steps for accelerating the overall reaction. (5) Integrated electrocatalyst design. Taking all these strategies together into account is necessary to integrate all above essential features into one electrocatalyst for enabling high-output water electrolysis. Beyond the progress made to date, the remaining challenges and opportunities is also discussed. With these insights, hopefully, this Account will shed light on the rational design of practical water-splitting electrocatalysts for the cost-effective and scalable production of hydrogen.
RESUMO
Tin halide perovskites are rising as promising materials for lead-free perovskite solar cells (PSCs). However, the crystallization rate of tin halide perovskites is much faster than the lead-based analogs, leading to more rampant trap states and lower efficiency. Here, we disclose a key finding to modulate the crystallization kinetics of FASnI3 through a non-classical nucleation mechanism based on pre-nucleation clusters (PNCs). By introducing piperazine dihydriodide to tune the colloidal chemistry of the FASnI3 perovskite precursor solution, stable clusters could be readily formed in the solution before nucleation. These pre-nucleation clusters act as intermediate phase and thus can reduce the energy barrier for the perovskite nucleation, resulting in a high-quality perovskite film with lower defect density. This PNCs-based method has led to a conspicuous photovoltaic performance improvement for FASnI3 -based PSCs, delivering an impressive efficiency of 11.39 % plus improved stability.
RESUMO
Inorganic cesium lead halide perovskites offer a pathway towards thermally stable photovoltaics. However, moisture-induced phase degradation restricts the application of hole transport layers (HTLs) with hygroscopic dopants. Dopant-free HTLs fail to realize efficient photovoltaics due to severe electrical loss. Herein, we developed an electrical loss management strategy by manipulating poly(3-hexylthiophene) with a small molecule, i.e., SMe-TATPyr. The developed P3HT/SMe-TATPyr HTL shows a three-time increase of carrier mobility owing to breaking the long-range ordering of "edge-on" P3HT and inducing the formation of "face-on" clusters, over 50 % decrease of the perovskite surface defect density, and a reduced voltage loss at the perovskite/HTL interface because of favorable energy level alignment. The CsPbI2 Br perovskite solar cell demonstrates a record-high efficiency of 16.93 % for dopant-free HTL, and superior moisture and thermal stability by maintaining 96 % efficiency at low-humidity condition (10-25 % R. H.) for 1500â hours and over 95 % efficiency after annealing at 85 °C for 1000â hours.
RESUMO
Creating high-density durable bifunctional active sites in an air electrode is essential but still challenging for a long-life rechargeable zinc-air battery with appealing power density. Herein, we discover a general strategy mediated by metastable rock salt oxides for achieving high-density well-defined transition-metal nanocrystals encapsulated in N-doped carbon shells (M@NC) which are anchored on a substrate by a porous carbon network as highly active and durable bifunctional catalytic sites. Small-size (15 ± 5 nm) well-dispersed Co2Fe1@NC in a high density (metal loading up to 54.0 wt %) offers the zinc-air battery a record power density of 423.7 mW cm-2. The dual protection from the complete graphitic carbon shells and the anchoring of the outer carbon network make Co2Fe1@NC chemically and mechanically durable, giving the battery a long cycling life. Systematic in-situ temperature-dependent characterizations as well as DFT modeling rationalize the rock salt oxide-mediated process and its indispensable role in achieving high-density nanosized M@NC. These findings open up opportunities for designing efficient electrocatalysts for high-performance Zn-air batteries and diverse energy devices.
RESUMO
Highly efficient and stable bifunctional electrocatalysts for oxygen reduction and evolution are essential for aqueous rechargeable Zn-air batteries, which require highly active sites as well as delicate structural design for increasing effective active sites and facilitating mass/electron transfer. Herein, a scalable and facile self-catalyzed growth strategy is developed to integrate highly active Co-N-C sites with 3D brush-like nanostructure, achieving Co-N-C nanobrushes with Co,N-codoped carbon nanotube branches grown on Co,N-codoped nanoparticle assembled nanowire backbones. Systematic investigations suggest that nanobrushes deliver significantly improved electrocatalytic activity compared with nanowire or nanotube counterparts and the longer nanotube branches give the better performance. Benefiting from the increase of accessible highly active sites and enhanced mass transfer and electron transportation, the present Co-N-C nanobrush exhibits superior electrocatalytic activity and durability when used as a bifunctional oxygen catalyst. It enables a rechargeable Zn-air battery with a high peak power density of 246 mW cm-2 and excellent cycling stability. These results suggest that the reported synthetic strategy may open up possibilities for exploring efficient electrocatalysts for diverse applications.
RESUMO
BACKGROUND: The aim of this study was to detect the expression of long noncoding RNA small nucleolar RNA host gene 18 (SNHG18) andsemaphorin 5A (SEMA5A) genes in multiple myeloma (MM) patients and to explore the correlation of the expression of these genes with the clinical characteristics and prognosis of MM patients. METHODS: Forty-seven newly diagnosed MM, 18 complete remission MM, 13 refractory/relapse MM, and 22 iron deficiency anemia (serving as control) samples were extracted at the Department of Hematology, Second Aï¬liated Hospital of Xian Jiaotong University between January 2015 and December 2016. The clinical features of the MM patients are summarized. Real-time quantitative PCR was performed to analyze the relative expression levels of the SNHG18 and SEMA5Agenes. The clinical characteristics and overall survival (OS) of the MM patients were statistically analyzed while measuring different levels of SNHG18 and SEMA5Agene expression. At the same time, the correlation between the expression of SNHG18 and SEMA5A was also analyzed. RESULTS: The analysis confirmed that SNHG18 and its possible target gene SEMA5A were both highly expressed in newly diagnosed MM patients. After analyzing the clinical signiï¬cance of SNHG18 and SEMA5A in MM patients, we found that the expression of SNHG18 and SEMA5A was related to the Durie-Salmon (DS), International Staging System (ISS), and Revised International Staging System (R-ISS) classification systems, and the Mayo Clinic Risk Stratification for Multiple Myeloma (mSMART; p < 0.05). Moreover, we observed a significant difference in OS between the SNHG18/SEMA5A high expression group and the low expression group. We found a positive correlation between SNHG18 and SEMA5A expression (r = 0.709, p < 0.01). Surprisingly, the expected median OS times of both the SNHG18 and SEMA5Ahigh expression groups were significantly decreased, which was in contrast to those of both the SNHG18 and SEMA5Alow expression groups and the single-gene high expression group (p < 0.05). CONCLUSION: High expression of both SNHG18 and SEMA5A is associated with poor prognosis in patients with MM.
Assuntos
Regulação Neoplásica da Expressão Gênica , Mieloma Múltiplo/sangue , Proteínas de Neoplasias/sangue , RNA Longo não Codificante/sangue , RNA Neoplásico/sangue , Semaforinas/sangue , Adulto , Idoso , Anemia Ferropriva/sangue , Anemia Ferropriva/genética , Feminino , Humanos , Estimativa de Kaplan-Meier , Masculino , Pessoa de Meia-Idade , Mieloma Múltiplo/genética , Mieloma Múltiplo/mortalidade , Mieloma Múltiplo/patologia , Proteínas de Neoplasias/biossíntese , Proteínas de Neoplasias/genética , Estadiamento de Neoplasias , Prognóstico , RNA Longo não Codificante/biossíntese , RNA Longo não Codificante/genética , RNA Neoplásico/biossíntese , RNA Neoplásico/genética , Reação em Cadeia da Polimerase em Tempo Real , Recidiva , Indução de Remissão , Semaforinas/biossíntese , Semaforinas/genéticaRESUMO
As a representative in-plane anisotropic two-dimensional (2D) material, germanium monoselenide (GeSe) has attracted considerable attention recently due to its various in-plane anisotropic material properties originating from the low symmetry of a puckered honeycomb structure. Although there have been plenty of reports on the in-plane anisotropic vibrational, electrical and optical properties of GeSe, the strain effect on those appealing anisotropies is still under exploration. Here we report a systematic first-principles computational investigation of strain-engineering of the anisotropic electronic properties of GeSe monolayers. We found that the anisotropic ratio of the effective mass and mobility of charge carriers (electrons and holes) of GeSe along two principle axes can be controlled by using simple strain conditions. Notably, the preferred conducting direction of GeSe can be even rotated by 90° under an appropriate uniaxial strain (>5%). Such effective strain modulation of the electronic anisotropy of GeSe monolayers provides them abundant opportunities for future mechanical-electronic devices.
RESUMO
Nitrogen-doped carbon materials (N-Cmat ) are emerging as low-cost metal-free electrocatalysts for the electrochemical CO2 reduction reaction (CO2 RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO2 RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well-defined N-Cmat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO2 RR performance on pyridinic N can be significantly boosted by electronic modulation from in-situ-generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28â mA cm-2 at -0.9â V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO2 RR on N-Cmat , which may guide the exploration of cost-effective electrocatalysts for efficient CO2 reduction.