Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Langmuir ; 39(21): 7514-7523, 2023 May 30.
Artigo em Inglês | MEDLINE | ID: mdl-37196238

RESUMO

We investigate the usage of polyelectrolyte complex materials for water remediation purposes, specifically their ability to remove nanoplastics from water, on which there is currently little to no prior research. We demonstrate that oppositely charged random copolymers are effective at quantitatively removing nanoplastic contamination from aqueous solution. The mechanisms underlying this remediation ability are explored through computational simulations, with corroborating quartz crystal microbalance adsorption experiments. We find that hydrophobic nanostructures and interactions likely play an important role.

2.
Biotechnol Bioeng ; 115(6): 1630-1635, 2018 06.
Artigo em Inglês | MEDLINE | ID: mdl-29460422

RESUMO

The CRISPR/Cas9 system has been widely used for multiplex genome engineering of Saccharomyces cerevisiae. However, its application in manipulating industrial yeast strains is less successful, probably due to the genome complexity and low copy numbers of gRNA expression plasmids. Here we developed an efficient CRISPR/Cas9 system for industrial yeast strain engineering by using our previously engineered plasmids with increased copy numbers. Four genes in both a diploid strain (Ethanol Red, 8 alleles in total) and a triploid strain (ATCC 4124, 12 alleles in total) were knocked out in a single step with 100% efficiency. This system was used to construct xylose-fermenting, lactate-producing industrial yeast strains, in which ALD6, PHO13, LEU2, and URA3 were disrupted in a single step followed by the introduction of a xylose utilization pathway and a lactate biosynthetic pathway on auxotrophic marker plasmids. The optimized CRISPR/Cas9 system provides a powerful tool for the development of industrial yeast based microbial cell factories.


Assuntos
Proteína 9 Associada à CRISPR/metabolismo , Repetições Palindrômicas Curtas Agrupadas e Regularmente Espaçadas , Edição de Genes/métodos , Microbiologia Industrial/métodos , Engenharia Metabólica/métodos , Saccharomyces cerevisiae/genética , Técnicas de Inativação de Genes , Redes e Vias Metabólicas/genética , Poliploidia
3.
Langmuir ; 33(40): 10543-10549, 2017 10 10.
Artigo em Inglês | MEDLINE | ID: mdl-28915053

RESUMO

The heterogeneous nucleation of colloidal crystals with attractive interactions has been investigated via in situ observations. We have found two types of nucleation processes: a cluster that overcomes the critical size for nucleation with a monolayer, and a method that occurs with two layers. The Gibbs free energy changes (ΔG) for these two types of nucleation processes are evaluated by taking into account the effect of various interfacial energies. In contrast to homogeneous nucleation, the change in interfacial free energy, Δσ, is generated for colloidal nucleation on a foreign substrate such as a cover glass in the present study. The Δσ and step free energy of the first layer, γ1, are obtained experimentally based on the equation deduced from classical nucleation theory (CNT). It is concluded that the ΔG of q-2D nuclei is smaller than of monolayer nuclei, provided that the same number of particles are used, which explains the experimental result that the critical size in q-2D nuclei is smaller than that in monolayer nuclei.

4.
Langmuir ; 33(13): 3262-3269, 2017 04 04.
Artigo em Inglês | MEDLINE | ID: mdl-28300415

RESUMO

Understanding nucleation dynamics is important both fundamentally and technologically in materials science and other scientific fields. Two-dimensional (2D) nucleation is the predominant growth mechanism in colloidal crystallization, in which the particle interaction is attractive, and has recently been regarded as a promising method to fabricate varieties of complex nanostructures possessing innovative functionality. Here, polymers are added to a colloidal suspension to generate a depletion attractive force, and the detailed 2D nucleation process on the terrace of the colloidal crystals is investigated. In the system, we first measured the nucleation rate at various area fractions of particles on the terrace, ϕarea. In situ observations at single-particle resolution revealed that nucleation behavior follows the framework of classical nucleation theory (CNT), such as single-step nucleation pathway and existence of critical size. Characteristic nucleation behavior is observed in that the nucleation and growth stage are clearly differentiated. When many nuclei form in a small area of the terrace, a high density of kink sites of once formed islands makes growth more likely to occur than further nucleation because nucleation has a higher energy barrier than growth. The steady-state homogeneous 2D nucleation rate, J, and the critical size of nuclei, r*, are measured by in situ observations based on the CNT, which enable us to obtain the step free energy, γ, which is an important parameter for characterizing the nucleation process. The γ value is found to change according to the strength of attraction, which is tuned by the concentration of the polymer as a depletant.

5.
J Colloid Interface Sci ; 591: 300-306, 2021 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-33611048

RESUMO

The structural evolution of growing thin colloidal crystals in a confined space via the convective assembly technique has been investigated. The thin colloidal crystals were grown in a wedge-shaped cell, where the height of the cell increased with increased crystal growth. Triangle and square patterns, denoted as [111]- and [100]-oriented grains, respectively, were formed alternately as the height of the cell increased. The structural transformation was associated with an increase in the number of layers when the n-layer [100]-oriented grains changed to n + 1-layer [111]-oriented grains. Between the different grain structures, a stripe pattern was observed, which was a transitional region, where particle configuration gradually changed. The structural transformation occurred through the continuous change of particle configuration rather than through the abrupt formation of a grain boundary. The interval of the strip pattern lengthened as the number of layers increased, which is understood to be the structure with the highest packing density. The findings of the study give a better insight into convective assembly in a confined space, and also contribute to the greater structural control of colloidal crystals, useful for a number of applications.

6.
Nat Commun ; 8(1): 1688, 2017 11 22.
Artigo em Inglês | MEDLINE | ID: mdl-29167442

RESUMO

Designing an optimal microbial cell factory often requires overexpression, knock-down, and knock-out of multiple gene targets. Unfortunately, such rewiring of cellular metabolism is often carried out sequentially and with low throughput. Here, we report a combinatorial metabolic engineering strategy based on an orthogonal tri-functional CRISPR system that combines transcriptional activation, transcriptional interference, and gene deletion (CRISPR-AID) in the yeast Saccharomyces cerevisiae. This strategy enables perturbation of the metabolic and regulatory networks in a modular, parallel, and high-throughput manner. We demonstrate the application of CRISPR-AID not only to increase the production of ß-carotene by 3-fold in a single step, but also to achieve 2.5-fold improvement in the display of an endoglucanase on the yeast surface by optimizing multiple metabolic engineering targets in a combinatorial manner.


Assuntos
Sistemas CRISPR-Cas , Engenharia Metabólica/métodos , Membrana Celular/metabolismo , Celulase/genética , Celulase/metabolismo , Deleção de Genes , Genes Fúngicos , Redes e Vias Metabólicas/genética , Interferência de RNA , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Proteínas de Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/metabolismo , Ativação Transcricional , beta Caroteno/biossíntese
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA