RESUMO
A novel, to the best of our knowledge, tunable multifocal liquid crystal microlens array (TMLCMA) was fabricated with a triple-electrode structure consisting of a large-hole, a small-hole array, and planar electrodes. The electro-optical performances of the TMLCMA are characterized, demonstrating the monofocal convex, multifocal convex, and multifocal concave functions when the TMLCMA is manipulated with various driving schemes. Furthermore, the homogenization of a laser beam is realized using the fabricated TMLCMA. The multifocal convex and multifocal concave functions of the TMLCMA successfully suppress the lattice phenomenon caused by the monofocal microlens array, homogenize the Gaussian beam to a flattop intensity distribution, and broaden the beam size.
RESUMO
A polarization-insensitive liquid crystal (LC) Fresnel lens is developed with binary LC configurations of 90°-twisted nematic (TN) and vertically-aligned (VA) domains in the adjacent zones. A LC mixture comprised of nematic host, photopolymer and chiral material is initially filled into the VA cell with orthogonal rubbing treatment. After the ultraviolet irradiation on the filled LC cell through a photomask with Fresnel zone plate pattern, the interactions among orthogonal rubbing treatment, self-assembly polymer gravels, and chiral material induce the 90°-TN structure in the odd zones, whereas the initial VA structures are maintained in the even zones. The fabricated LC Fresnel lens with binary configuration emerges a maximum diffraction efficiency of around 35% at a voltage of 2.3â V, close to the theoretical diffraction limit of around 41%. The diffractive focus of the LC Fresnel lens is polarization-insensitive at the voltage above 2â V. When the voltage reaches 10â V, the diffractive focus vanishes. The numerical calculation confirms that the polarization-insensitive property appears in the primary focus of the LC Fresnel lens. This work reports a simple method to develop a highly efficient, polarization-insensitive, and electrically tunable LC Fresnel lens which is favorable for imaging system.
RESUMO
Microlens has significant applications in integrated micro-optical systems. Recently, multifocal microlens arrays are expected to extend the depth of field for imaging systems and realize a highly efficient laser beam homogenizer. This work presents what we believe to be a novel approach for developing a tunable multifocal liquid crystal microlens array (TMLCMA), which can be operated in convex and concave modes through voltage control schemes. The TMLCMA is manufactured using nematic liquid crystals (LCs) with negative dielectric anisotropy, in conjunction with a triple-electrode structure consisting of top large-hole, middle small-hole array, and bottom planar electrodes. When a voltage is applied, the axially symmetric fringing electric field induced by the large-hole electrode causes the focal length of the microlens to gradually and radially change from the TMLCMA border toward the center. The gradient in the change of focal length is electrically tunable. The calculated spatial potential distributions qualitatively explain the multifocal characteristic and dual lens modes of the TMLCMA. The LC molecules in each microlens are reoriented in an axially symmetrical form, resulting in a polarization-insensitive TMLCMA. The imaging functions of the TMLCMA operated with dual lens modes are shown through practical demonstrations. The simple fabrication and versatile function make the developed TMLCMA highly promising for various optical system applications.
RESUMO
Liquid crystals (LCs) have been a vital component of modern communication and photonic technologies. However, traditional LC alignment on polyimide (PI) requires mechanically rubbing treatment to control LC orientation, suffering from dust particles, surface damage, and electrostatic charges. In this paper, LC alignment on organic single-crystal rubrene (SCR) has been studied and used to fabricate rubbing-free LC devices. A rubrene/toluene solution is spin-coated on the indium-tin-oxide (ITO) substrate and transformed thereafter to the orthorhombic SCR after annealing. Experimental result reveals that SCR-based LC cell has a homogeneous alignment geometry, the pretilt angle of LCs is low and the orientation of LCs is determined with capillary filling action of LCs. LC alignment on SCR performs a wider thermal tolerance than that on PI by virtue of the strong anchoring nature of LCs on SCR due to van der Waals and π-π electron stacking interactions between the rubrene and LCs. SCR-based LC cell performs a lower operation voltage, faster response time, and higher voltage holding ratio than the traditional PI-based LC cell. Organic SCR enables to play a role as weakly conductive alignment layer without rubbing treatment and offers versatile function to develop novel LC devices.
RESUMO
A see-through display based on a planar holographic waveguide with a tunable focal plane is presented. A negative liquid crystal lens is attached on the outcoupling location of the waveguide to manipulate the image distance. The continuous tunable range for the focal length is from negative infinity to -65â cm. The demonstrated prototype system provides 10.5° field-of-view (FOV) for the images not locating at infinity. The FOV for the images not locating at infinity is limited by the diameter of the liquid crystal lens. The lens function of the liquid crystal lens is polarization dependent. By controlling the polarization states of the real scene and the input information image, the liquid crystal lens keeps the see-through function for a real scene and simultaneously plays the role of a negative lens for the input information image. Compared to the see-through display system with a single focal plane, the presented system offers a more comfortable augmented reality (AR) experience.
RESUMO
A novel approach for fabricating liquid crystal (LC) lenses is presented. The approach involves the use of a photocurable prepolymer dispersed in a cell fabricated with vertically aligned substrates. A radial gradient UV irradiation intensity distribution is produced using a radial variable neutral density filter. Under UV irradiation, the prepolymer diffuses and is then polymerized on the substrate surfaces owing to vertical phase separation. After polymerization, the diameter of the self-assembled polymer gravel on the substrates has a radial gradient distribution, causing a radial gradient pretilt angle (RGPA) distribution on the substrates and producing LC lenses. By numerical simulation, RGPA LC lens has significantly lower supplied voltage than conventionally hole-patterned electrode (HPE) LC lens, and higher lens power. In the experiment, the fabricated RGPA LC lens with aperture size of 5â mm possesses a simple planar electrode structure, low operation voltage (< 4â V), small root mean square wavefront error (< 0.08 λ), and acceptable focusing quality. By the overdriving scheme, the switched-off time of the fabricated RGPA LC lens reaches 0.27 s. With the novel approach, low-voltage LC lenses with different optical aperture sizes can be easily fabricated.
RESUMO
In this study, a large-aperture hole-patterned liquid crystal (LHLC) lens was prepared from a mixture of nematic liquid crystal (NLC, E7) and organic material (N-benzyl-2-methyl-4-nitroaniline, BNA). The electro-optic properties of doped and undoped samples were measured, compared, and analyzed. The doped sample exhibited a response time that was â¼6 times faster than that of the undoped sample because BNA doping decreased the rotational viscosity of the NLC. BNA dopant effectively suppressed the RMS error of LHLC lens addressed at the high voltage. Furthermore, the BNA dopant revealed a considerable absorbance for short wavelengths (< 450â nm), automatically providing the LHLC lens with a blue light filtering function for ophthalmic applications.
RESUMO
A 4â mm-aperture hole-patterned liquid crystal (LC) lens has been fabricated using a LC mixture, which consisted of rutile titanium dioxide (TiO2) nanoparticles (NPs) and nematic LC E7, for the first time. The TiO2 NP dopant improves the addressing and operation voltages of the LC lens significantly because it strengthens the electric field surrounding the TiO2 NP and increases the capacitance of lens cell. Unlike the doping of common colloidal NPs, that of rutile TiO2 NPs increases the phase transition temperature and birefringence of the LC mixture, thereby helping enhance the lens power of LC lens. In comparison with a pure LC lens, the TiO2 NP-doped one has approximately 50% lower operation voltage because of the strengthened electric field around the NPs and has roughly 2.8 times faster response time because of the decreased rotational viscosity of the LC mixture and the increased interaction between the LC molecules by the NP dopants. Notably, the doping of rutile TiO2 NPs improves the operation voltage, tunable focusing capability, and response time of LC lens simultaneously. Meanwhile, this method does not degrade the focusing and lens qualities. The imaging performances of TiO2 NP-doped LC lens at various voltages are demonstrated practically by tunable focusing on three objectives at different positions. These results introduce NP in the application of LC lenses.
RESUMO
We demonstrate a new approach to control the pretilt angle of liquid crystals (LCs) with photocurable prepolymer in a cell fabricated with vertically aligned substrates. During UV exposure, prepolymer approaches and is polymerized on the substrate surfaces because of the vertical phase separation induced by differences in the surface tensions of the employed materials. After polymerization, the polymer structure formed on the substrate alters its surface polarity and changes the pretilt angle of the LC cell. The LC pretilt angle can be controlled from 87.3° to 2.5° when the prepolymer concentration ranges from 0 wt% to 2.5 wt%.
RESUMO
We propose a hole-patterned large aperture (LA) liquid crystal (LC) lens with a diameter of 6 mm. In our design, a floating ring electrode is embedded into the interface between the dielectric layer and the LC layer. This structure increases the electric field strength around the floating ring electrode located near the aperture center and assists in distributing the fringing electric field throughout the LC layer. Therefore, the thick dielectric layer used in the conventional hole-patterned LA LC lens can be effectively decreased. Consequently, the proposed LA LC lens has low operation voltage, large lens power, and introduces a low wavefront error of approximately 0.07 λ.
RESUMO
BACKGROUND: Shisa3 is a novel tumor suppressor identified in lung cancer. However, its antitumor activity in other human cancers and the mechanism of gene inactivation remain unknown. METHODS: SHISA3 expression was measured by reverse transcription-PCR (RT-PCR) and quantitative RT-PCR (RT-qPCR). DNA methylation was determined by bisulfite sequencing and pyrosequencing. RESULTS: Down-regulation of SHISA3 expression was observed in all of 11 colorectal cancer (CRC) cell lines and was further confirmed in 34 (65.4 %) of 52 colorectal carcinomas by RT-qPCR. Four of six CRC cell lines could restore SHISA3 expression after treatment with 5-aza-2'-deoxycytidine. Tumor-specific methylation of five CpG sites in the first intron of SHISA3 was identified by bisulfite sequencing, and their methylation levels were quantified in 127 pairs of primary CRC tissues by bisulfite pyrosequencing. The methylation levels of SHISA3 in tumors were noticeably higher than that in their matched normal mucosae. In addition, SHISA3 hypermethylation was significantly associated with an increased risk of disease recurrence in patients with stage II and III disease (P = 0.007) and was an independent predictor of poor overall survival [hazard ratio (HR) 2.9, 95 % confidence interval (CI) 1.5-5.8; P = 0.002] and disease-free survival (HR 4.0, 95 % CI 1.6-10.2; P = 0.003) of CRC patients. CONCLUSIONS: SHISA3 gene is epigenetically inactivated in a substantial fraction of CRC, and its hypermethylation is of prognostic significance in predicting clinical outcome. The quantitative bisulfite pyrosequencing assay established could be a cost-effective tool for providing a potential biomarker of adverse prognosis in CRC.
Assuntos
Adenocarcinoma/genética , Biomarcadores Tumorais/genética , Neoplasias Colorretais/genética , Metilação de DNA , Proteínas de Membrana/genética , Recidiva Local de Neoplasia/genética , Adenocarcinoma/secundário , Adulto , Idoso , Idoso de 80 Anos ou mais , Estudos de Casos e Controles , Neoplasias Colorretais/patologia , Ilhas de CpG , Feminino , Seguimentos , Humanos , Metástase Linfática , Masculino , Pessoa de Meia-Idade , Recidiva Local de Neoplasia/patologia , Estadiamento de Neoplasias , Prognóstico , Regiões Promotoras Genéticas/genética , RNA Mensageiro/genética , Reação em Cadeia da Polimerase em Tempo Real , Reação em Cadeia da Polimerase Via Transcriptase Reversa , Sulfitos , Taxa de Sobrevida , Células Tumorais CultivadasRESUMO
We control the pretilt angle of liquid crystals (LCs) by simultaneously doping silica nanoparticles (SNs) and reactive monomers into the LC cell. Application of AC high voltage (ACHV) to the cell compels the lifting force and the facilitation of polar groups to move the SNs and monomers toward the substrate surface. Polymer networks and SNs are stabilized at the substrate surface after UV exposure, sustaining the LCs at high pretilt angles. The deposited SNs on the substrate surface increases the anchoring energy of the substrate; the dispersed SNs in the cell decrease the relaxation constant of LCs. Therefore, the response time of the high-pretilted-polymer-stabilized LC cell is decreased. The method enables the control of the LC pretilt angle over a broad range. The slow response time of the polymer-stabilized LC cell from high monomer dose can also be prevented following the addition of SNs.
RESUMO
We demonstrate a liquid crystal (LC) microlens array (MLA) fabricated by LCs possessing negative dielectric anisotropy, in conjunction with a cell with a three-electrode structure. The presented LC MLA is polarization-insensitive and can be operated in both concave and convex modes. The shortest focal length of the LC MLA is -2.54 and 2.22 mm in concave and convex mode, respectively. Disclination lines that are usually observed in conventional hole-patterned LC lens can also be avoided because of the vertical alignment treatment of LCs.
Assuntos
Lentes , Cristais Líquidos/química , Óptica e Fotônica/instrumentação , Interferometria , Luz , Microscopia , Compostos de Estanho/químicaRESUMO
An electrically switchable diffraction grating (ESDG) based on cholesteric liquid crystal (CLC) filled into the cell with slit electrodes is demonstrated in this study. On one hand, with low voltage, the ESDG has high second order diffraction efficiency because of the alternating planar and fingerprint textures. With high voltage, on the other hand, the ESDG has high first order diffraction efficiency because of the alternating planar and homeotropic textures. The first and second order diffraction efficiencies of ESDG are electrically swapped. The maximum diffraction efficiency of the ESDG is approximately 32% at each grating mode.
RESUMO
We demonstrate a polarization-independent distortion corrector fabricated using a polymer-dispersed liquid crystal (PDLC) cell placed on the intermediate image plane of an optical system. At low voltage, a hazy PDLC cell scatters the incident rays and redirects the off-axis propagated chief ray. The chief ray approaches the principal point of the lens element, thereby decreasing image distortion. At high voltage, the PDLC cell becomes transparent, thereby restoring the image distortion. The PDLC-based distortion corrector is an easy-to-fabricate universal device that can be applied to various optical systems. With a large lens diameter, the distortion of a PDLC-corrected image is approximately 1/5 of that of an uncorrected image.
RESUMO
BACKGROUND: Lung cancer remains the leading cause of cancer-related mortality globally, with late diagnoses often resulting in poor prognosis. In response, the Lung Ambition Alliance aims to double the 5-year survival rate by 2025. OBJECTIVE: Using the Taiwan Cancer Registry, this study uses the survivorship-period-cohort model to assess the feasibility of achieving this goal by predicting future survival rates of patients with lung cancer in Taiwan. METHODS: This retrospective study analyzed data from 205,104 patients with lung cancer registered between 1997 and 2018. Survival rates were calculated using the survivorship-period-cohort model, focusing on 1-year interval survival rates and extrapolating to predict 5-year outcomes for diagnoses up to 2020, as viewed from 2025. Model validation involved comparing predicted rates with actual data using symmetric mean absolute percentage error. RESULTS: The study identified notable improvements in survival rates beginning in 2004, with the predicted 5-year survival rate for 2020 reaching 38.7%, marking a considerable increase from the most recent available data of 23.8% for patients diagnosed in 2013. Subgroup analysis revealed varied survival improvements across different demographics and histological types. Predictions based on current trends indicate that achieving the Lung Ambition Alliance's goal could be within reach. CONCLUSIONS: The analysis demonstrates notable improvements in lung cancer survival rates in Taiwan, driven by the adoption of low-dose computed tomography screening, alongside advances in diagnostic technologies and treatment strategies. While the ambitious target set by the Lung Ambition Alliance appears achievable, ongoing advancements in medical technology and health policies will be crucial. The study underscores the potential impact of continued enhancements in lung cancer management and the importance of strategic health interventions to further improve survival outcomes.
Assuntos
Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/mortalidade , Masculino , Taiwan/epidemiologia , Feminino , Estudos Retrospectivos , Pessoa de Meia-Idade , Idoso , Taxa de Sobrevida/tendências , Adulto , Sistema de Registros/estatística & dados numéricos , Previsões , Idoso de 80 Anos ou mais , Análise de SobrevidaRESUMO
Data curation for a hospital-based cancer registry heavily relies on the labor-intensive manual abstraction process by cancer registrars to identify cancer-related information from free-text electronic health records. To streamline this process, a natural language processing system incorporating a hybrid of deep learning-based and rule-based approaches for identifying lung cancer registry-related concepts, along with a symbolic expert system that generates registry coding based on weighted rules, was developed. The system is integrated with the hospital information system at a medical center to provide cancer registrars with a patient journey visualization platform. The embedded system offers a comprehensive view of patient reports annotated with significant registry concepts to facilitate the manual coding process and elevate overall quality. Extensive evaluations, including comparisons with state-of-the-art methods, were conducted using a lung cancer dataset comprising 1428 patients from the medical center. The experimental results illustrate the effectiveness of the developed system, consistently achieving F1-scores of 0.85 and 1.00 across 30 coding items. Registrar feedback highlights the system's reliability as a tool for assisting and auditing the abstraction. By presenting key registry items along the timeline of a patient's reports with accurate code predictions, the system improves the quality of registrar outcomes and reduces the labor resources and time required for data abstraction. Our study highlights advancements in cancer registry coding practices, demonstrating that the proposed hybrid weighted neural-symbolic cancer registry system is reliable and efficient for assisting cancer registrars in the coding workflow and contributing to clinical outcomes.
RESUMO
A distortion aberration (DA) correction device is fabricated using a liquid crystal lens array (LCLA), which is placed at the intermediate image plane of the optical system. Without voltage, the LCLA does not work, the image is distorted due to the aberration from the optical system; with voltage, the incident light is focused by the LCLA and then the distorted image is corrected. The correction of distorted image by LCLA is attributed to the redirection of the off-axis propagated chief ray approaches the principal point of the lens element.
Assuntos
Artefatos , Aumento da Imagem/instrumentação , Lentes , Cristais Líquidos/química , Refratometria/instrumentação , Campos Eletromagnéticos , Desenho de Equipamento , Análise de Falha de Equipamento , Cristais Líquidos/efeitos da radiaçãoRESUMO
This work proposes a thermally rotatable grating that is based on hybrid-aligned cholesteric liquid crystals (HBA-cholesteric LCs). Experiments reveal that the HBA-cholesteric texture has a uniformly striped domain, which forms a grating, when the ratio of the cell gap to the helical pitch (d/p) is in the range of 2≤d/p≤3. The stripe direction of the HBA-cholesteric grating is predicted by the proposed vertically aligned LC layer model. The stripe direction of the HBA-cholesteric grating rotates continuously under thermal and electrical effects. Furthermore, the HBA-cholesteric grating has a larger rotational angle under the thermal effect (~101°) than under the electrical effect (~48°). Potential applications of the proposed thermally rotatable cholesteric grating for beam steering devices are emphasized.
Assuntos
Colesterol/química , Cristais Líquidos/química , Refratometria/instrumentação , Cristalização , Humanos , Estrutura Secundária de ProteínaRESUMO
We design a dual-view liquid crystal display (DVLCD) which display two different images in the left and right viewing directions simultaneously. The main-pixel of the DVLCD comprises the right sub-pixels (RSPs) and the left sub-pixels (LSPs). The LCs in the RSPs and the LSPs have the opposite rotation directions, which are controlled by the inclined electric fields provided by the patterned electrodes. Addressing the RSPs and LSPs with the voltages having different polarities effectively decreases the maximum operation voltage of the DVLCD. The proposed DVLCD is free of the complicate multiple-step rubbing and shadow mask treatments, and hence has the advantages of low cost and easy fabrication.