p32/OPA1 axis-mediated mitochondrial dynamics contributes to cisplatin resistance in non-small cell lung cancer.

Cisplatin resistance is a major obstacle in the treatment of non-small cell lung cancer (NSCLC). p32 and OPA1 are the key regulators of mitochondrial morphology and function. This study aims to investigate the role of the p32/OPA1 axis in cisplatin resistance in NSCLC and its underlying mechanism. The levels of p32 protein and mitochondrial fusion protein OPA1 are higher in cisplatin-resistant A549/DDP cells than in cisplatin-sensitive A549 cells, which facilitates mitochondrial fusion in A549/DDP cells. In addition, the expression of p32 and OPA1 protein is also upregulated in A549 cells during the development of cisplatin resistance. Moreover, p32 knockdown effectively downregulates the expression of OPA1, stimulates mitochondrial fission, decreases ATP generation and sensitizes A549/DDP cells to cisplatin-induced apoptosis. Furthermore, metformin significantly downregulates the expressions of p32 and OPA1 and induces mitochondrial fission and a decrease in ATP level in A549/DDP cells. The co-administration of metformin and cisplatin shows a significantly greater decrease in A549/DDP cell viability than cisplatin treatment alone. Moreover, D-erythro-Sphingosine, a potent p32 kinase activator, counteracts the metformin-induced downregulation of OPA1 and mitochondrial fission in A549/DDP cells. Taken together, these findings indicate that p32/OPA1 axis-mediated mitochondrial dynamics contributes to the acquired cisplatin resistance in NSCLC and that metformin resensitizes NSCLC to cisplatin, suggesting that targeting p32 and mitochondrial dynamics is an effective strategy for the prevention of cisplatin resistance.

A novel polymer enabled by polymerized small molecule strategy for tumor photothermal and photodynamic therapy.

Photothermal therapy (PTT) and photodynamic therapy (PDT) are effective method for tumor treatment. However, the limited variety and quantity of photothermal agents (PTAs) and photosensitizer (PSs) are still major challenges. Moreover, the cell apoptosis mechanism induced by PDT and PTT is still elusive. A fused-ring small molecule acceptor-donor acceptor' donor-acceptor (A-DA'D-A) type of Y5 (Scheme 1) has a narrow band-gap and strong light absorption. Herein, we used Y5 to polymerize with thiophene unit to obtain polymer PYT based on polymerized small molecule strategy, and PYT nanoparticles (PYT NPs) was prepared via one-step nanoprecipitation strategy with DSPE-PEG2000. PYT NPs had excellent biocompatibility, good photostability, high photothermal conversion efficiency (67%) and reactive oxygen species (ROS) production capacity under 808 nm laser irradiation (PYT NPs + NIR). In vitro and in vivo experiments revealed that PYT NPs + NIR had the ability to completely ablate tumor cells. It was demonstrated that cell apoptosis induced by PYT NPs + NIR was closely related to mitochondrial damage. This study provides valuable guidance for constructing high-performance organic PTAs and PSs for tumor treatment. Scheme 1 PYT enabled by polymerized small molecule strategy for tumor photothermal and photodynamic therapy.

Isolation and identification of 1,3,6,8-tetrabromocarbazole - degrading bacteria.

Halogenated carbazoles are a new class of persistent organic pollutants with dioxin-like toxicity, and this study focused on the microbial degradation of 1,3,6,8-tetrabromocarbazole. In this study, a novel 1,3,6,8-tetrabromocarbazole (1,3,6,8-TBCZ) degrading strain TB-1 was isolated from contaminated soil and identified as Achromobacter sp. based on its 16S rRNA gene sequence analysis, morphological, physiological, and biochemical characteristics. The soil sample was collected from a pharmaceutical factory in Suzhou, China. The strain was able to effectively degrade 1 mg L-1 1,3,6,8-TBCZ in 7 d at pH 7.0 and 30 °C with 80% degradation rate. During the process, the intermediate metabolites were identified as Tribromocarbazole, dibromocarbazole and bromocarbazole via gas chromatography mass spectrometry (GC-MS). The results indicated that strain TB-1 may contribute to the bioremediation of polyhalogenated carbazoles (PHCs) in contaminated environment.

Ferroelectric Polymer Drives Performance Enhancement of Non-fullerene Organic Solar Cells.

Enhancing the built-in electric field to promote charge dynamitic process is of great significance to boost the performance of the non-fullerene organic solar cells (OSCs), which has rarely been concerned. In this work, we introduced a cheap ferroelectric polymer as an additive into the active layers of non-fullerene OSCs to improve the device performance. An additional and permanent electrical field was produced by the polarization of the ferroelectric dipoles, which can substantially enhance the built-in electric field. The promoted exciton separation, significantly accelerated charge transport, reduced the charge recombination, as well as the optimized film morphology were observed in the device, leading to a significantly improved performance of the PVDF-modified OSCs with various active layers, such as PM6 : Y6, PM6 : BTP-eC9, PM6 : IT-4F and PTB7-Th : Y6. Especially, a record efficiency of 17.72 % for PM6 : Y6-based OSC and an outstanding efficiency of 18.17 % for PM6 : BTP-eC9-based OSC were achieved.

Isomeric Effect of Wide Bandgap Polymer Donors with High Crystallinity to Achieve Efficient Polymer Solar Cells.

Two highly crystalline polymer donors (PBTz4T2C-a, PBTz4T2C-b) with isomers (4T2C-a, 4T2C-b) are synthesized and applied in polymer solar cells. The developed polymers possess proper energy levels and complementary absorption with an efficient electron acceptor IT2F. It is interesting that the photophysical properties, crystallinity, and active layer morphology characteristic can be significantly changed by just slightly regulating the substitution position of the carboxylate groups. A series of simulation calculations of the two isomers are conducted in the geometry and electronic properties to explore the difference induced by the position adjustment of carboxylate groups. The results decipher that 4T2C-b moiety features much stronger intramolecular noncovalent S⋯O interactions compared to that of 4T2C-a, implying a higher coplanarity and much stronger crystallinity, and leading to excessive phase separation in PBTz4T2C-b:IT2F blend film. In contrast, PBTz4T2C-a with 4T2C-a moiety exhibits suitable crystallinity with a lower the highest occupied molecular orbital level, higher film absorption coefficient, and charge mobilities, resulting in a much higher power conversion efficiency of 11.02%. This research demonstrates that the molecular conformation is of great importance to be considered for developing high-performance polymer donors.

Asymmetric Wide-Bandgap Polymers Simultaneously Improve the Open-Circuit Voltage and Short-Circuit Current for Organic Photovoltaics.

A trade-off between open-circuit voltage (V OC ) and high short-circuit (J SC ) becomes one of the most vital problems limiting further improvement in polymer solar cells' (PSCs) efficiency. In this work, two asymmetric polymer donors PBDT-F-2TC and PBDT-SF-2TC are designed and synthesized. When blended with a state-of-the-art acceptor IT-4F with low lowest-unoccupied molecular orbital level, simultaneously high V OC (up to 0.94 V) and J SC (up to 20.73 mA cm-2 ) are obtained for both copolymers. Note that the V OC value of 0.94 V is the highest value of PSCs based on IT-4F reported so far. The simultaneously improved V OC and J SC in resulting devices are discovered from the deep highest-occupied molecular orbital levels (-5.5 to -5.7 eV) and the hyperchromic effect of the polymers, the small driving force, and the small energy loss during the charge transfer, due to the synergistic effect of asymmetric carboxylate unit and fluorine/sulfur atoms. More importantly, thanks to the asymmetric 2TC, both PBDT-F-2TC- and PBDT-SF-2TC-based PSCs can be successfully processed by non-halogenated solvent 1,2,4-trimethylbenzene (TMB) to yield device efficiencies of 10.29% and 10.39%, respectively, which are the maximum values for non-fullerene PSCs fabricated using the eco-friendly solvent TMB.

"Smart" Ag Nanostructures for Plasmon-Enhanced Spectroscopies.

Silver is an ideal candidate for surface plasmon resonance (SPR)-based applications because of its great optical cross-section in the visible region. However, the uses of Ag in plasmon-enhanced spectroscopies have been limited due to their interference via direct contact with analytes, the poor chemical stability, and the Ag(+) release phenomenon. Herein, we report a facile chemical method to prepare shell-isolated Ag nanoparticle/tip. The as-prepared nanostructures exhibit an excellent chemical stability and plasmonic property in plasmon-enhanced spectroscopies for more than one year. It also features an alternative plasmon-mediated photocatalysis pathway by smartly blocking "hot" electrons. Astonishingly, the shell-isolated Ag nanoparticles (Ag SHINs), as "smart plasmonic dusts", reveal a ∼1000-fold ensemble enhancement of rhodamine isothiocyanate (RITC) on a quartz substrate in surface-enhanced fluorescence. The presented "smart" Ag nanostructures offer a unique way for the promotion of ultrahigh sensitivity and reliability in plasmon-enhanced spectroscopies.

Highly Reflective Silver-Enhanced Coating with High Adhesion and Sulfurization Resistance for Telescopes.

Highly reflective metal coatings are essential for manufacturing reflecting telescope mirrors to achieve the highest reflectivity with broad spectral bandwidth. Among metallic materials, enhanced silver-based coatings can provide higher reflectivity in the 400-500 nm spectral range to better performance from visible to near IR. Moreover, over-coating a dielectric protective layer on the mirror's front side attains additional hardness and oxidation stability. In this paper, we study a combination of thermal and electron beam evaporation as a technology to form protected enhanced high reflective Ag coatings. A newly designed multiplayer film can pass ASTM 5B adhesive performance testing and give sulfurization inhibition. The average specular reflectivity for the enhancement coating is about 98% in wavelengths across the spectral range from 400-1000 nm. This innovation has been demonstrated on a Newtonian type telescope, with storage in an ambiance humidity H = 60-85%, and temperature T = 10-35 °C, for more than six months without degradation in coating performance.

Exploiting Novel Unfused-Ring Acceptor for Efficient Organic Solar Cells with Record Open-Circuit Voltage and Fill Factor.

Unfused-ring acceptors (UFAs) show bright application prospects in organic solar cells (OSCs) thanks to their easy synthesis, low cost, and good device performance. The selection of central-core building block and suitable side chain are the key factors to achieve high-performance UFAs. Current tremendous endeavors for the development of UFAs mainly concentrate on obtaining higher short-circuit current density (Jsc ), albeit accompanied by low open-circuit voltage (Voc ) and modest fill factor (FF). Herein, two novel A-D-A'-D-A type UFAs (BTCD-IC and BTCD-2FIC), which have the same new electron-withdrawing central-core dithieno[3',2':3,4;2'',3'':5,6]-benzo[1,2-c][1,2,5]thiadia-zole (DTBT) and cyclopentadithiophene unit (CPDT, substituted by 2-butyl-1-octyl alkyl chain) coupling with different terminals, were designed and synthesized. Two UFAs showed strong and broad light absorption in the wavelength range of 300-850 nm owing to the strong intramolecular charge transfer effect favorable by DTBT core. Compared with BTCD-IC, BTCD-2FIC with F-containing terminal group exhibited higher molar extinction coefficient, lower energy level, higher charge mobility, stronger crystallinity, more ordered molecular stacking, and better film morphology. As a result, when blended with donor polymer PBDB-T (poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1,2-c:4,5-c']-dithiophene-4,8-dione)]), the BTCD-2FIC-based OSC achieved a superior power conversion efficiency (PCE) of 11.32 %, with a high Voc of 0.85 V, a Jsc of 18.24 mA cm-2 , and a FF of 73 %, than BTCD-IC-based OSC (PCE=8.96 %). Impressively, the simultaneously enhanced Voc and FF values of the PBDB-T:BTCD-2FIC device were the highest values of the A-D-A'-D-A-type UFAs. The results demonstrate the application of electron-withdrawing DTBT central-core unit in efficient UFAs provides meaningful molecular design guidance for high-performance OSCs.

Biomagnification and risk assessment of polychlorinated biphenyls in food web components from Zhoushan fishing ground, China.

Trophodynamics and risks of polychlorinated biphenyls (PCBs) in organisms from the Zhoushan fishing ground (ZFG), China were studied. Σ22PCBs varied from 1.36 to 36.75 ng/g wet weight, which were far below the maximum residue levels allowed in fishery products. However, estimated daily intake and hazard ratio calculations present possible adverse effects due to PCB pollution. Significantly positive correlations appeared between wet-weighted concentrations of target chemicals and trophic levels (TLs) of the organisms, with trophic magnification factors (TMFs) from 1.15 to 9.72. The TMF values first increased with an increase of compound's KOW values, and then decreased, with log KOW around 7.0 as an inflection point. TL is suggested as the key factor controlling contaminant burden among the species for only PCBs 105, 138, 153, and 171. For the remaining PCBs, lipid content of the organism or metabolite capacity of the compound may be more important influence on their bioaccumulation.

Double Acceptor Block-Containing Copolymers with Deep HOMO Levels for Organic Solar Cells: Adjusting Carboxylate Substituent Position for Planarity.

A deep highest occupied molecular orbital (HOMO) level is a prerequisite for polymer donor material to boost the organic solar cells (OSCs) performance by achieving high open circuit voltage ( Voc). Abandoning the traditional concept of donor-acceptor (D-A) structure, two copolymers PBTZ-4TC and PBTZ-C4T based on acceptor1-π-acceptor2 (A1-π-A2) architecture, where thiophene as the bridge, the difluorinated benzotriazole (BTZ) as A1 unit alternating copolymerized with 4,4'-dicarboxylate-substituted difluorotetrathiophene (4TC) and 3,3'-dicarboxylate-substituted difluorotetrathiophene (C4T) as A2, respectively, are developed. Because of the double acceptor blocks with high electron affinity, both A1-π-A2 type copolymers possess the lower HOMO levels of 5.52-5.56 eV, which are lower than most D-A type donors. Polymer PBTZ-4TC and PBTZ-C4T have the same backbone but only differ with the position of carboxylate substituent on the A2 unit. Intriguingly, subtle optimizing the position of the carboxylate-substitute causes a significantly difference on the properties of the A1-π-A2 type copolymers. PBTZ-C4T with more planar geometry is demonstrated with better light absorption, higher crystallinity, more pronounced temperature-dependent aggregation effect, and favorable bulk heterojunction morphology but with slightly higher HOMO level and more emission energy loss relative to the PBTZ-4TC. The PBTZ-C4T device exhibits the higher power conversion efficiency (PCE) of 9.34% than the PBTZ-4TC-based one (8.75%). These results reveal that concept of A1-π-A2 type copolymers not only can afford more flexibility in tuning the energy levels to achieve the deep HOMO levels but also can provide a facial strategy to greatly enrich the types of polymer donors for high-performance OSCs.

[Environmental efficiency evaluation under carbon emission constraint in Western China].

This research used the SBM model based on undesirable outputs to measure the static environmental efficiency of Western China under carbon emission constraint from 2000 to 2012. The researchers also utilized the Malmquist index to further analyze the change tendency of environmental efficiency. Additionally, Tobit regression analysis was used to study the factors relevant to environmental efficiency. Practical solutions to improve environmental quality in Western China were put forward. The study showed that in Western China, environmental efficiency with carbon emission constraint was significantly lower than that without carbon emission constraint, and the difference could be described as an inverse U-shaped curve which increased at first and then decreased. Guang-xi and Inner Mongolia, the two provinces met the effective environmental efficiency levels all the time under carbon emission constraint. However, the five provinces of Guizhou, Gansu, Qinghai, Ningxia and Xinjiang did not. Furthermore, Ningxia had the lowest level of environmental efficiency, with a score between 0.281-0.386. Although the environmental efficiency of most provinces was currently at an ineffective level, the environmental efficiency quality was gradually improving at an average speed of 6.6%. Excessive CO2 emission and a large amount of energy consumption were the primary factors causing environmental inefficiency in Western China, and energy intensity had the most negative impact on the environmental efficiency. The increase of import and export trade reduced the environmental efficiency significantly in Western China, while the increase of foreign direct investment had a positive effect on its environmental efficiency.