Ethylene Polymerizations Catalyzed by Fluorinated "Sandwich" Diimine-Nickel and Palladium Complexes.

Nickel and palladium complexes bearing "sandwich" diimine ligands with perfluorinated aryl caps have been synthesized, characterized, and explored in ethylene polymerization reactions. The X-ray crystallographic analysis of the precatalysts 16 and 6b shows differences from their nonfluorinated analogues 17 and 19, with the perfluorinated aryl caps centered precisely over the nickel and palladium centers, which results in higher buried volumes of the metal centers relative to the nonfluorinated analogues. The sandwich diimine-palladium complexes 5a and 5b containing perfluorinated aryl caps polymerize ethylene in a controlled fashion with activities that are substantially increased compared with their nonfluorinated analogues. Migratory insertion rates in relevant methyl ethylene complexes agree with the activities exhibited in bulk polymerization experiments. DFT studies suggest that facility of ethylene rotation from its preferred orientation perpendicular to the Pd-alkyl bond into a parallel in-plane conformation contributes to the higher polymerization activity for 5b relative to 18a. For these palladium systems, polymer molecular weights can be controlled via hydrogen addition (hydrogenolysis), which is unusual for late-transition-metal-catalyzed olefin polymerizations with no catalyst deactivation occurring. Sandwich diimine-nickel complexes 6a and 6b with perfluorinated aryl caps show ethylene polymerization activities that are about half of those of classical tetraisopropyl-substituted catalyst 2 but again are more active than the analogous nonfluorinated sandwich complexes. Ethylene polymerizations exhibit living behavior, and branched ultrahigh-molecular-weight polyethylenes (UHMWPEs) with very low-molecular-weight distributions (less than 1.1) are obtained. The activated nickel catalysts are stable in the absence of monomer and show good long-term stability at 25 °C.

Tripodal Organic Cages with Unconventional CH···O Interactions for Perchlorate Remediation in Water.

Perchlorate anions used in industry are harmful pollutants in groundwater. Therefore, selectively binding perchlorate provides solutions for environmental remediation. Here, we synthesized a series of tripodal organic cages with highly preorganized Csp3-H bonds that exhibit selectively binding to perchlorate in organic solvents and water. These cages demonstrated binding affinities to perchlorate of 105-106 M-1 at room temperature, along with high selectivity over competing anions, such as iodide and nitrate. Through single crystal structure analysis and density functional theory calculations, we identified unconventional Csp3-H···O interactions as the primary driving force for perchlorate binding. Additionally, we successfully incorporated this cage into a 3D-printable polymer network, showcasing its efficacy in removing perchlorate from water.

Nickel-Catalyzed Homologation of Vinylidene Difluoride (CH2═CF2): Selective ß-F vs ß-H Elimination.

Hydrofluoroolefins (HFOs) constitute the newest generation of fluorocarbon refrigerants and foam-blowing agents due to their reduced global warming potential vs their saturated analogues. To identify new synthetic routes to HFOs, we show that reactions of bulky Ni(0) phosphine and -NHC complexes with vinylidene difluoride (VF2) afford µ-fluoro-1,1,3-trifluorobut-3-enyl Ni complexes. Moreover, addition of triisopropylsilane allows for reductive elimination of the reduced product─2,4,4-trifluoro-1-butene─demonstrating the Ni-catalyzed hydrodefluorodimerization of VF2. Accompanying DFT calculations identify the T-shaped nickelacyclopentane intermediate that spontaneously undergoes selective intramolecular ß-F (vs ß-H) elimination.

Comparing Properties of Common Bioinorganic Ligands with Switchable Variants of Cytochrome c.

Ligand substitution at the metal center is common in catalysis and signal transduction of metalloproteins. Understanding the effects of particular ligands, as well as the polypeptide surrounding, is critical for uncovering mechanisms of these biological processes and exploiting them in the design of bioinspired catalysts and molecular devices. A series of switchable K79G/M80X/F82C (X = Met, His, or Lys) variants of cytochrome (cyt) c was employed to directly compare the stability of differently ligated proteins and activation barriers for Met, His, and Lys replacement at the ferric heme iron. Studies of these variants and their nonswitchable counterparts K79G/M80X have revealed stability trends Met < Lys < His and Lys < His < Met for the protein FeIII-X and FeII-X species, respectively. The differences in the hydrogen-bonding interactions in folded proteins and in solvation of unbound X in the unfolded proteins explain these trends. Calculations of free energy of ligand dissociation in small heme model complexes reveal that the ease of the FeIII-X bond breaking increases in the series amine < imidazole < thioether, mirroring trends in hardness of these ligands. Experimental rate constants for X dissociation in differently ligated cyt c variants are consistent with this sequence, but the differences between Met and His dissociation rates are attenuated because the former process is limited by the heme crevice opening. Analyses of activation parameters and comparisons to those for the Lys-to-Met ligand switch in the alkaline transition suggest that ligand dissociation is entropically driven in all the variants and accompanied by Lys protonation at neutral pH. The described thiolate redox-linked switches have offered a wealth of new information about interactions of different protein-derived ligands with the heme iron in cyt c model proteins, and we anticipate that the strategy of employing these switches could benefit studies of other redox metalloproteins and model complexes.

Configurational Lability at Tetrahedral Phosphorus: syn/anti-Isomerization of a P-Stereogenic Phosphiranium Cation by Intramolecular Epimerization at Phosphorus.

Tetrahedral main-group compounds are normally configurationally stable, but P-epimerization of the chiral phosphiranium cations syn- or anti-[Mes*P(Me)CH2 CHPh][OTf] (Mes*=2,4,6-(t-Bu)3 C6 H2 ) occurred under mild conditions at 60 °C in CD2 Cl2 , resulting in isomerization to give a syn-enriched equilibrium mixture. Ion exchange with excess [NBu4 ][Δ-TRISPHAT] (Δ-TRISPHAT=Δ-P(o-C6 Cl4 O2 )3 ) followed by chromatography on silica removed [NBu4 ][OTf] and gave mixtures of syn- and anti-[Mes*P(Me)CH2 CHPh][Δ-TRISPHAT]⋅x[NBu4 ][Δ-TRISPHAT]. NMR spectroscopy showed that isomerization proceeded with epimerization at P and retention at C. DFT calculations are consistent with a mechanism involving P-C cleavage to yield a hyperconjugation-stabilized carbocation, pyramidal inversion promoted by σ-interaction of the P lone pair with the neighboring ß-carbocation, and ring closure with inversion of configuration at P.

Diastereoselective Synthesis of P-Stereogenic Secondary Phosphine Oxides (SPOs) Bearing a Chiral Substituent by Ring Opening of (+)-Limonene Oxide with Primary Phosphido Nucleophiles.

Kinetic separation of the commercially available cis/trans-(+)-limonene oxide mixture by ring opening with primary phosphido nucleophiles LiPHR (R = ferrocenyl, Ph, Cy, t-Bu, Mes* (Mes* = 2,4,6-(t-Bu)3C6H2)), followed by treatment with aqueous NH4Cl and H2O2, gave unreacted cis-(+)-limonene oxide and diastereoenriched mixtures of the secondary phosphine oxides (SPOs) PHR(trans-(+)-Lim-OH)(O), which could be separated by chromatography and/or recrystallization. This one-pot synthesis uses a cheap chiral material and commercially available primary phosphines to control the configuration of the new P-stereogenic SPOs, which are potentially useful as ligands for metal complexes in asymmetric catalysis.

Topochemical Synthesis of Single-Crystalline Hydrogen-Bonded Cross-Linked Organic Frameworks and Their Guest-Induced Elastic Expansion.

Covalently linked single-crystalline porous organic materials are highly desired for structure-property analysis; however, periodically polymerizing organic entities into high dimensional networks is challenging. Here, we report a series of topologically divergent single-crystalline hydrogen-bonded cross-linked organic frameworks (HCOFs) with visible guest-induced elastic expansions, which mutually integrate high structural order and high flexibility into one framework. These HCOFs are synthesized by photo-cross-linking molecular crystals with alkyldithiols of different chain lengths. Their detailed structural information was revealed by single-crystal X-ray analysis and experimental investigations of HCOFs and their corresponding single-crystalline analogues. Upon guest adsorption, HCOF-2 crystals composed of a 3D self-entangled polymer network undergo anisotropic expansion to more than twice their original size, while the 2D-bilayer HCOF-3 crystals exhibit visible, layered sorption bands and form delaminated sheets along the plane of its 2D layers. The dynamic expansion of HCOF networks creates guest-induced porosity with over 473% greater volume than their permanent voids, as calculated from their record-breaking aqueous iodine adsorption capacities. Temperature-gated DMSO sorption investigations illustrated that the flexible nature of cross-linkers in HCOFs provides positive entropy from the coexistence of multiple conformations to allow for elastic expansion and contraction of the frameworks.

Diastereoselective Coordination of P-Stereogenic Secondary Phosphines in Copper(I) Chiral Bis(phosphine) Complexes: Structure, Dynamics, and Generation of Phosphido Complexes.

Diastereoselective coordination of racemic secondary phosphines (PHRR') to Cu(I) precursors containing chiral bis(phosphines) (diphos*) was explored as a potential route to P-stereogenic phosphido complexes. Reaction of [Cu(NCMe)4][PF6] with chiral bis(phospholanes) gave [Cu(diphos*)2][PF6] (diphos* = ( R, R)-Me-DuPhos (1), ( R, R)-Et-DuPhos (2), or ( R, R)-Me-FerroLANE) (3)) or the mono(chelates) [Cu(diphos*)(NCMe) n][PF6] (diphos* = ( R, R)- i-Pr-DuPhos, n = 2 (4); diphos* = ( R, R)-Me-FerroLANE, n = 1 (5)). Treatment of [Cu(NCMe)4][PF6] with diphos* and PHMe(Is) (Is = 2,4,6-( i-Pr)3C6H2) gave mixtures of diastereomers of [Cu(( R, R)- i-Pr-DuPhos)(PHMe(Is))(NCMe)][PF6] (6) and [Cu(( R, R)-Me-FerroLANE)(PHMe(Is))][PF6] (7); two of the three expected isomers of the bis(secondary phosphine) complexes [Cu(( R, R)- i-Pr-DuPhos)(PhHP(CH2) nPHPh)][PF6] ( n = 2 (8); n = 3 (9)) were formed preferentially in related reactions. Reaction of the halide-bridged dimers [Cu(( R, R)- i-Pr-DuPhos)(X)]2 or [Cu(( R, R)-Me-FerroLANE)(I)]2 with PHMe(Is) gave the labile adducts Cu(( R, R)- i-Pr-DuPhos)(PHMe(Is))(X) (X = Cl (10), Br (11), I (12)) and Cu(( R, R)-Me-FerroLANE)(PHMe(Is))(I) (13). Complexes 1, 6, and 8-11 were structurally characterized by X-ray crystallography. Variable temperature NMR studies of 6 and 8 showed that the secondary phosphine ligands underwent reversible dissociation. Deprotonation of 6 or 7 generated the P-stereogenic phosphido complexes Cu(diphos*)(PMeIs) (diphos* = ( R, R)- i-Pr-DuPhos (14) or ( R, R)-Me-FerroLANE) (17)), observed by 31P NMR spectroscopy, but decomposition also occurred. Density functional theory calculations were used to characterize the diastereomers of thermally unstable 17 and the inversion barrier in a model copper-phosphido complex. These observations provided structure-property relationships which may be useful in developing catalytic asymmetric reactions involving secondary phosphines and P-stereogenic copper phosphido intermediates.

Building Strain with Large Macrocycles and Using It To Tune the Thermal Half-Lives of Hydrazone Photochromes.

Strain has been used as a tool to modulate the reactivity (e.g., mechanochemistry) and thermal isomerization kinetics of photochromic compounds. Macrocyclization is used to build-up strain in such systems, and in general the reactivity and rates increase with the decrease in macrocycle size. To ascertain the effect of strain on recently reported bistable hydrazone photoswitches, we incorporated them into macrocycles having varying aliphatic linker lengths (C3-C7), and studied their switching behavior, and effect of macrocycle size on the thermal isomerization rate. Surprisingly, while the systems with C3-C5 linkers behave as expected (i.e., the rate is faster with smaller linkers), the isomerization rate in the systems with larger aliphatic linkers (C6-C8) is enhanced up to 4 orders of magnitude. NMR spectroscopy, X-ray crystallography and DFT calculations were used to elucidate this unexpected behavior, which on the basis of our analyses results from the buildup of Pitzer (torsional), Prelog (transannular) and Baeyer (large angle) strain in the longer linkers.

Inversion of Configuration at the Phosphorus Nucleophile in the Diastereoselective and Enantioselective Synthesis of P-Stereogenic syn-Phosphiranes from Chiral Epoxides.

Nucleophilic substitution results in inversion of configuration at the electrophilic carbon center (SN 2) or racemization (SN 1). The stereochemistry of the nucleophile is rarely considered, but phosphines, which have a high barrier to pyramidal inversion, attack electrophiles with retention of configuration at P. Surprisingly, cyclization of bifunctional secondary phosphine alkyl tosylates proceeded under mild conditions with inversion of configuration at the nucleophile to yield P-stereogenic syn-phosphiranes. DFT studies suggested that the novel stereochemistry results from acid-promoted tosylate dissociation to yield an intermediate phosphenium-bridged cation, which undergoes syn-selective cyclization.

Generation of Hydrofluoronickelacycles from Trifluoroethylene and Ni(0): Ligand Effects on Regio-/Stereoselectivity and Reactivity.

Treatment of Ni(0) complexes 1a-e with sub-atmospheric pressures of trifluoroethylene (TrFE) affords hydrofluoronickelacyclopentanes L2Ni(C4F6H2) 2a-e (L = PPh3, P(O-o-tol)3, PPh2Me, PPhMe2, PMe3). Fluorine NMR analysis of 2a-e demonstrates predominant formation of three (of the possible six) isomers upon oxidative cycloaddition of TrFE: the cis and trans head-tail isomers and the trans head-head isomer, where the CHF group is defined as the TrFE "head". The respective ratios of L2Ni(C4F6H2) isomers are influenced by the nature of L, with smaller phosphines favoring the thermodynamically preferred (from DFT calculations) trans head-head isomer (cf. 50% with PMe3) and the largest affording small amounts of the tail-tail isomers. Lewis and Brønsted acids induce a surprising double C-F bond activation in 2c-d, affording small functionalized hydrofluoroalkenes. Interestingly, varying the acid employed dictates the organic product obtained from the head-tail isomers: BF3·OEt2 is selective for 1,1,2,3-tetrafluorocyclobutene, whereas Me3SiOTf and N,N-dimethylanilinium bromide yield (Z,E)-1,1,3,4-tetrafluorobutadiene as the major fluorinated product. Reaction intermediates were isolated, and possible pathways are discussed.

Synthesis, Structure, and Luminescence of Copper(I) Halide Complexes of Chiral Bis(phosphines).

For investigation of structure-property relationships in copper phosphine halide complexes, treatment of copper(I) halides with chiral bis(phosphines) gave dinuclear [Cu((R,R)-i-Pr-DuPhos)(µ-X)]2 [X = I (1), Br (2), Cl (3)], [Cu(µ-((R,R)-Me-FerroLANE)(µ-I)]2 (5), and [Cu((S,S)-Et-FerroTANE)(I)]2 (6), pentanuclear cluster Cu5I5((S,S)-Et-FerroTANE)3 (7), and the monomeric Josiphos complexes Cu((R,S)-CyPF-t-Bu)(I) (8) and Cu((R,S)-PPF-t-Bu)(I) (9); 1-3, 5, and 7-9 were structurally characterized by X-ray crystallography. Treatment of iodide 1 with AgF gave [Cu((R,R)-i-Pr-DuPhos)(µ-F)]2 (4). DuPhos complexes 1-4 emitted yellow-green light upon UV irradiation at room temperature in the solid state. This process was studied by low-temperature emission spectroscopy and density functional theory (DFT) calculations, which assigned the luminescence to (M + X)LCT (Cu2X2 to DuPhos aryl) excited states. Including Grimme's dispersion corrections in the DFT calculations (B3LYP-D3) gave significantly shorter Cu-Cu distances than those obtained using B3LYP, with the nondispersion-corrected calculations better matching the crystallographic data; other intramolecular metrics are better reproduced using B3LYP-D3. A discussion of the factors leading to this unusual observation is presented.

Coordination contributions to protein stability in metal-substituted carbonic anhydrase.

Contributions of the active site metal to the stability of carbonic anhydrase (CA) were quantified by differential scanning calorimetry and complementary unfolding measurements of CA substituted with Co(2+), Cd(2+), Cu(2+), Ni(2+) and Mn(2+). The metal ions stabilize the protein to different extent, with the highest stability provided by the native Zn(2+). This additional stability does not correlate with the enthalpy of the three metal-imidazole (His) bonds at the active site or other properties of the metal ions (charge density, hydration enthalpy). However, DFT calculations reveal an energetic penalty associated with metal coordination at the active site, and the magnitude of this penalty correlates inversely with metal contributions to the stability of the protein. While the affinity of CA for metal ions generally reflects the Irving-Williams series, the additional thermal stability provided by metal ions is modulated by the rigid His3 coordination that is imposed at the protein site.

A Masked Phosphinidene Trapped in a Fluxional NCN Pincer.

The trapping of a phosphinidene (R-P) in an NCN pincer is presented. Stabilized phosphinidene 1 was characterized by 31 P{1 H}, 1 H, and 13 C{1 H} NMR spectroscopy, exhibiting an averaged C2v symmetry in solution between -60 and 60 °C. In the solid state, the phosphinidene is coordinated by one adjacent N atom featuring a formal P-N bond (1.757(2) Å) to give a five-membered ring with some aromatic character, confirmed by DFT calculations (B3LYP-D3/6-311G**++) to be the ground-state structure. Equilibration of the two N ligands occurs rapidly in solution via a "bell-clapper"-type process through an associative symmetric transition state calculated to lie 4.0 kcal mol-1 above the ground state.

Dearomative Indole (3 + 2) Reactions with Azaoxyallyl Cations--New Method for the Synthesis of Pyrroloindolines.

Herein, we report the first examples of the synthesis of pyrroloindolines by means of (3 + 2) dearomative annulation reactions between 3-substituted indoles and highly reactive azaoxyallyl cations. Computational studies using density functional theory (DFT) (B3LYP-D3/6-311G**++) support a stepwise reaction pathway in which initial C-C bond formation takes place at C3 of indole, followed by ring closure to give the observed products. Insights gleaned from these calculations indicate that the solvent, either TFE or HFIP, can stabilize the transition state through H-bonding interactions with oxygen of the azaoxyallyl cation and other relevant intermediates, thereby increasing the rates of these reactions.

Near-infrared light activated azo-BF2 switches.

Increasing the electron density in BF2-coodinated azo compounds through para-substitution leads to a bathochromic shift in their activation wavelength. When the substituent is dimethyl amine, or the like, the trans/cis isomerization process can be efficiently modulated using near infrared light. The electron donating capability of the substituent also controls the hydrolysis half-life of the switch in aqueous solution, which is drastically longer for the cis isomer, while the BF2-coodination prevents reduction by glutathione.

Dearomative indole (3 + 2) cycloaddition reactions.

A diastereoselective (3 + 2) dearomative annulation of 3-substituted indoles with α-haloketones has been developed. Significant regiochemical control was observed. This methodology provides easy access to highly functionalized cyclopenta- or cyclohexa-fused indoline compounds, which are common structures of many natural products. The synthetic potential of this reaction was demonstrated in the concise syntheses of the core structures of vincorine, isocorymine, and aspidophylline A. DFT studies (B3LYP-D3/6-311++G**/MeOH) on cyclization mechanisms involving the 2-hydroxyallyl cation and its deprotonated oxyallyl cation have been performed. Under the reaction conditions, with a sparingly soluble Na2CO3 base, both species may be present and both pathways are viable. Both pathways support the formation of the experimentally observed O-bound intermediate, its transformation to the final product, the regiochemical and eventual stereochemical outcome of the kinetic cyclization product, and the thermodynamic preference for formation of the final stereoisomer.

Regiodivergent (3 + 2) annulation reactions of oxyallyl cations.

We report a new method for the regiodivergent dearomative (3 + 2) reaction between 3-substituted indoles and oxyallyl cations. Access to both regioisomeric products is possible and is contingent on the presence or absence of a bromine atom on the substituted oxyallyl cation. In this way, we are able to prepare molecules that contain highly-hindered, stereodefined, vicinal, quaternary centers. Detailed computational studies employing energy decomposition analysis (EDA) at the DFT level establishes that regiochemical control arises from either reactant distortion energy or orbital mixing and dispersive forces, depending on the oxyallyl cation. Examination of the Natural Orbitals for Chemical Valence (NOCV) confirms that indole acts as the nucleophilic partner in the annulation reaction.

Protonation of P-Stereogenic Phosphiranes: Phospholane Formation via Ring Opening and C-H Activation.

Protonation of cyclopropanes and aziridines is well-studied, but reactions of phosphiranes with acids are rare and have not been reported to result in ring opening. Treatment of syn-Mes*PCH2CHR (Mes* = 2,4,6-(t-Bu)3C6H2, R = Me or Ph, syn-1-2) or anti-Mes*PCH2CHPh (anti-2) with triflic acid resulted in regiospecific anti-Markovnikov C-protonation with ring opening and cyclophosphination of a Mes* ortho-t-Bu group to yield the phospholanium cations [PH(CH2CH2R)(4,6-(t-Bu)2-2-CMe2CH2C6H2)][OTf] (R = Me or Ph, 3-4), which were deprotonated with NEt3 to give phospholanes 5-6. Enantioenriched or racemic syn-1 both gave racemic 3. The byproduct [Mes*PH(CH2CH2Me)(OH)][OTf] (7) was formed from syn-1 and HOTf in the presence of water. Density functional theory calculations suggested that P-protonation followed by ring opening and hydride migration to C yields the phosphenium ion, [Mes*P(CH2CH2Me)][OTf], which undergoes C-H oxidative addition of an o-t-Bu methyl group. This work established a new reactivity pattern for phosphiranes.

Visible light switching of a BF2-coordinated azo compound.

Here we report the synthesis and characterization of a BF(2)-azo complex that can be induced to isomerize without the need of deleterious UV light. The complexation of the azo group with BF(2), coupled with the extended conjugation of the N═N π-electrons, increases the energy of the n-π* transitions and introduces new π-nonbonding (π(nb)) to π* transitions that dominate the visible region. The well separated π(nb)-π* transitions of the trans and cis isomers enable the efficient switching of the system by using only visible light. The complexation also leads to a slow cis → trans thermal relaxation rate (t(1/2) = 12.5 h). Theoretical calculations indicate that the absorption bands in the visible range can be tuned using different Lewis acids, opening the way to a conceptually new strategy for the manipulation of azo compounds using only visible light.