RESUMO
Field-emission devices are promising candidates to replace silicon fin field-effect transistors as next-generation nanoelectronic components. For these devices to be adopted, nanoscale field emitters with nanoscale gaps between them need to be fabricated, requiring the transfer of, for example, sub-10 nm patterns with a sub-20 nm pitch to substrates like silicon and tungsten. New resist materials must therefore be developed that exhibit the properties of sub-10 nm resolution and high dry etch resistance. A negative tone, metal-organic resist is presented here. It can be patterned to produce sub-10 nm features when exposed to helium ion beam lithography at line doses on the order of tens of picocoulombs per centimeter. The resist was used to create 5 nm wide, continuous, discrete lines spaced on a 16 nm pitch in silicon and 6 nm wide lines on an 18 nm pitch in tungsten, with line edge roughness of 3 nm. After the lithographic exposure, the resist demonstrates high resistance to silicon and tungsten dry etch conditions (SF6 and C4F8 plasma), allowing the pattern to be transferred to the underlying substrates. The resist's etch selectivity for silicon and tungsten was measured to be 6.2:1 and 5.6:1, respectively; this allowed 3 to 4 nm thick resist films to yield structures that were 21 and 19 nm tall, respectively, while both maintained a sub-10 nm width on a sub-20 nm pitch.
RESUMO
A new resist material for electron beam lithography has been created that is based on a supramolecular assembly. Initial studies revealed that with this supramolecular approach, high-resolution structures can be written that show unprecedented selectivity when exposed to etching conditions involving plasmas.
RESUMO
Purpose: To investigate the incidence, seasonal variation, and differences among age, sex, and race for rhegmatogenous retinal detachment (RRD) repair, retinal break (RB) treatment, and posterior vitreous detachment (PVD) in the Intelligent Research in Sight (IRIS) Registry. Design: Retrospective database study. Participants: Patients in the IRIS Registry who underwent RRD repair, RB treatment, or cataract surgery (CS) based on Current Procedural Terminology codes and PVD diagnosis based on International Classification of Diseases, Ninth and Tenth Revision, codes. Methods: Daily incidence rates were defined as the ratio of patients who underwent RRD repair or RB treatment and patients with a diagnosis of PVD to the total number of patients followed on a given day within the IRIS Registry. The CS group was included as a comparison for seasonal variation. Rates were stratified by decade of life, sex, and race. Main Outcome Measures: Time series trends for incidence rates of RRD, RB, and PVD. Results: A total of 7 115 774 patients received a diagnosis of incident PVD, 237 646 patients underwent RRD repair, and 359 022 patients underwent RB treatment. Also included were 5 940 448 patients who underwent CS. The mean daily incidence for RRD repair, RB treatment, PVD diagnosis, and CS were 0.46 per 100 000 patients, 0.70 per 100 000 patients, 13.90 per 100 000 patients, and 11.80 per 100 000 patients, respectively. Men showed higher incidence of RRD repair and RB treatment than women, whereas women showed higher incidence of PVD diagnosis. Rhegmatogenous retinal detachment incidence was higher in White people compared with other races. Seasonal decreases in PVD, RB treatment, RRD repair, and CS corresponded to national holidays, with larger decreases in winter months. Kaplan-Meier estimates showed that RRD repair and RB treatment typically occurred within 60 days of PVD diagnosis. Conclusions: Within the IRIS Registry, the highest incidence of RRD was in the 6th and 7th decade of life. There was a higher incidence of RRD repair and RB treatment in men compared with women. The seasonal variation associated with national holidays was less pronounced for RRD repair and RB treatment.
RESUMO
Purpose: Investigate associations of natural environmental exposures with exudative and nonexudative age-related macular degeneration (AMD) across the United States. Design: Database study. Participants: Patients aged ≥ 55 years who were active in the IRIS Registry from 2016 to 2018 were analyzed. Patients were categorized as nonexudative, inactive exudative, and active exudative AMD by International Classification of Diseases 10th Revision and Current Procedural Terminology (CPT) codes. Patients without provider-level ZIP codes matching any ZIP code tabulation area were excluded. Methods: Environmental data were obtained from public sources including the US Geological Survey, National Renewable Energy Laboratory, National Oceanic and Atmospheric Administration, and Environmental Protection Agency. Multiple variable, mixed effects logistic regression models with random intercepts per ZIP code tabulation area quantified the association of each environmental variable with any AMD versus non-AMD patients, any exudative AMD versus nonexudative AMD, and active exudative AMD versus inactive exudative and nonexudative AMD using 3 separate models, while adjusting for age, sex, race, insurance type, smoking history, and phakic status. Main Outcome Measure: Odds ratios for environmental factors. Results: A total of 9 884 527 patients were included. Elevation, latitude, solar irradiance measured in global horizontal irradiance (GHI) and direct normal irradiance (DNI), temperature and precipitation variables, and pollution variables were included in our models. Statistically significant associations with active exudative AMD were GHI (odds ratio [OR], 3.848; 95% confidence interval [CI] with Bonferroni correction, 1.316-11.250), DNI (OR, 0.581; 95% CI, 0.370-0.913), latitude (OR, 1.110; 95% CI, 1.046-1.178), ozone (OR, 1.014; 95% CI, 1.004-1.025), and nitrogen dioxide (OR, 1.005; 95% CI, 1.000-1.010). The only significant environmental associations with any AMD were inches of snow in the winter (OR, 1.005; 95% CI, 1.001-1.009) and ozone (OR, 1.011; 95% CI, 1.003-1.019). Conclusions: The strongest environmental associations differed between AMD subgroups. The solar variables GHI, DNI, and latitude were significantly associated with active exudative AMD. Two pollutant variables, ozone and nitrogen dioxide, also showed positive associations with AMD. Further studies are warranted to investigate the clinical relevance of these associations. Our curated environmental dataset has been made publicly available at https://github.com/uw-biomedical-ml/AMD_environmental_dataset.
RESUMO
Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction WS2 solar cells, with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high specific power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly.
RESUMO
Space power systems require photovoltaics that are lightweight, efficient, reliable, and capable of operating for years or decades in space environment. Current solar panels use planar multijunction, III-V based solar cells with very high efficiency, but their specific power (power to weight ratio) is limited by the added mass of radiation shielding (e.g., coverglass) required to protect the cells from the high-energy particle radiation that occurs in space. Here, we demonstrate that III-V nanowire-array solar cells have dramatically superior radiation performance relative to planar solar cell designs and show this for multiple cell geometries and materials, including GaAs and InP. Nanowire cells exhibit damage thresholds ranging from â¼10-40 times higher than planar control solar cells when subjected to irradiation by 100-350 keV protons and 1 MeV electrons. Using Monte Carlo simulations, we show that this improvement is due in part to a reduction in the displacement density within the wires arising from their nanoscale dimensions. Radiation tolerance, combined with the efficient optical absorption and the improving performance of nanowire photovoltaics, indicates that nanowire arrays could provide a pathway to realize high-specific-power, substrate-free, III-V space solar cells with substantially reduced shielding requirements. More broadly, the exceptional reduction in radiation damage suggests that nanowire architectures may be useful in improving the radiation tolerance of other electronic and optoelectronic devices.