Automated synthesis of 68 Ga/177 Lu-PSMA on the Trasis miniAllinOne.

Prostate-specific membrane antigen (PSMA)-based radioligands for positron emission tomography (PET)/computed tomography (CT) studies represent the gold standard for detection of recurrent prostate cancer (PCa). [68 Ga]PSMA-HBED-CC is a PET radiotracer suitable for detection of PCa, and its clinical use has become widespread over the last few years. In this contribution, we detail our GMP-compliant production of [68 Ga]PSMA-HBED-CC using the Trasis miniAllinOne radiosynthesizer and report synthetic and clinical data for the first 100 productions of 2019. Additionally, we detail our efforts towards a GMP-compliant production of the radiotherapeutic [177 Lu]PSMA-I&T using the same synthesis module. PSMA-based radioligand therapy (RLT) offers a possible future treatment in cases of metastatic castration-resistant PCa, and GMP-compliant routine production methods are therefore called for. This report highlights how PSMA-based agents for theranostic purposes can be conveniently produced at a single radiochemistry Good Manufacturing Practice (GMP) site, thereby facilitating optimized detection and treatment of PCa.

68Ga-PSMA-PET/CT in comparison with 18F-fluoride-PET/CT and whole-body MRI for the detection of bone metastases in patients with prostate cancer: a prospective diagnostic accuracy study.

OBJECTIVES: To determine the diagnostic accuracy of 68gallium prostate-specific membrane antigen (PSMA)-based positron emission tomography/computed tomography (PET/CT) in comparison with 18F-fluoride-based PET/CT (NaF-PET/CT) and whole-body magnetic resonance imaging (WB-MRI) for the detection of bone metastases in patients with prostate cancer. METHODS: Sixty patients with prostate cancer were included in the period May 2016 to June 2017. The participants underwent three scans (index tests) within 30 days: a NaF-PET/CT, a WB-MRI and a PSMA-PET/CT. Experienced specialists assessed the scans. In the absence of a histological reference standard, the final diagnosis was determined as a panel diagnosis. Measures of the diagnostic performances of the index tests were calculated from patient-based dichotomous outcomes (0 or ≥ 1 bone metastasis) and pairwise compared (McNemar test). For each index test, the agreement with the final diagnosis with regard to the number of bone metastases detected (0, 1-5, > 5) and the inter-reader agreement was calculated (kappa coefficients). RESULTS: Fifty-five patients constituted the final study population; 20 patients (36%) were classified as having bone metastatic disease as their final diagnosis. The patient-based diagnostic performances were (sensitivity, specificity, overall accuracy) PSMA-PET/CT (100%, 100%, 100%), NaF-PET/CT (95%, 97%, 96%) and WB-MRI (80%, 83%, 82%). The overall accuracy of PSMA-PET/CT was significantly more favourable compared to WB-MRI (p = 0.004), but not to NaF-PET/CT (p = 0.48). PSMA-PET/CT classified the number of bone metastases reliably compared to the final diagnosis (kappa coefficient 0.97) and with an "almost perfect" inter-reader agreement (kappa coefficient 0.93). CONCLUSIONS: The overall accuracy of PSMA-PET/CT was significantly more advantageous compared to WB-MRI, but not to NaF-PET/CT. KEY POINTS: • PSMA-PET/CT assessed the presence of bone metastases correctly in all 55 patients • PSMA-PET/CT was more advantageous compared to WB-MRI • No difference was found between PSMA-PET/CT and NaF-PET/CT.

Multicenter Experience with Good Manufacturing Practice Production of [11C]PiB for Amyloid Positron Emission Tomography Imaging.

Alzheimer's disease (AD) is a neurodegenerative disorder with increasing global prevalence and accounts for over half of all dementia cases. Early diagnosis is paramount for not only the management of the disease, but also for the development of new AD treatments. The current golden standard for diagnosis is performed by positron emission tomography (PET) scans with the tracer [11C]Pittsburg Compound B ([11C]PiB), which targets amyloid beta protein (Aß) that builds up as plaques in the brain of AD patients. The increasing demand for AD diagnostics is in turn expected to drive an increase in [11C]PiB-PET scans and the setup of new [11C]PiB production lines at PET centers globally. Here, we present the [11C]PiB production setups, experiences, and use from four Danish PET facilities and discuss the challenges and potential pitfalls of [11C]PiB production. We report on the [11C]PiB production performed with the 6-OH-BTA-0 precursor dissolved in either dry acetone or 2-butanone and by using either [11C]CO2 or [11C]CH4 as 11C- precursors on three different commercial synthesis modules: TracerLab FX C Pro, ScanSys, or TracerMaker. It was found that the [11C]CO2 method gives the highest radioactive yield (1.5 to 3.2 GBq vs. 0.8 ± 0.3 GBq), while the highest molar activity (98.0 ± 61.4 GBq/µmol vs. 21.2 to 95.6 GBq/µmol) was achieved using [11C]CH4. [11C]PiB production with [11C]CO2 on a TracerLab FX C Pro offered the most desirable results, with the highest yield of 3.17 ± 1.20 GBq and good molar activity of 95.6 ± 44.2 GBq/µmol. Moreover, all reported methods produced [11C]PiB in quantities suitable for clinical applications, thus providing a foundation for other PET facilities seeking to establish their own [11C]PiB production.

GMP production of 6-[18F]Fluoro-L-DOPA for PET/CT imaging by different synthetic routes: a three center experience.

BACKGROUND: The radiofluorinated levodopa analogue 6-[18F]F-L-DOPA (3,4-dihydroxy-6-18F-L-phenylalanine) is a commonly employed radiotracer for PET/CT imaging of multiple oncological and neurological indications. An unusually large number of different radiosyntheses have been published to the point where two different Ph. Eur. monographs exist depending on whether the chemistry relies on electrophilic or nucleophilic radiosubstitution of appropriate chemical precursors. For new PET imaging sites wishing to adopt [18F]FDOPA into clinical practice, selecting the appropriate production process may be difficult and dependent on the clinical needs of the site. METHODS: Data from four years of [18F]FDOPA production at three different clinical sites are collected and compared. These three sites, Aarhus University Hospital (AUH), Odense University Hospital (OUH), and Herlev University Hospital (HUH), produce the radiotracer by different radiosynthetic routes with AUH adopting an electrophilic strategy, while OUH and HUH employ two different nucleophilic approaches. Production failure rates, radiochemical yields, and molar activities are compared across sites and time. Additionally, the clinical use of the radiotracer over the time period considered at the different sites are presented and discussed. RESULTS: The electrophilic substitution route suffers from being demanding in terms of cyclotron operation and maintenance. This challenge, however, was found to be compensated by a production failure rate significantly below that of both nucleophilic approaches; a result of simpler chemistry. The five-step nucleophilic approach employed at HUH produces superior radiochemical yields compared to the three-step approach adopted at OUH but suffers from the need for more comprehensive synthesis equipment given the multi-step nature of the procedure, including HPLC purification. While the procedure at OUH furnishes the lowest radiochemical yield of the synthetic routes considered, it produces the highest molar activity. This is of importance across the clinical applications of the tracer discussed here, including dopamine synthesis in striatum of subjects with schizophrenia and congenital hyperinsulinism in infants. CONCLUSION: For most sites either of the two nucleophilic substitution strategies should be favored. However, which of the two will depend on whether a given site wishes to optimize the radiochemical yield or the ease of the use.